field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

field_job_salary_range

Exciting opportunity to work for a reputable company in the racing industry, located in beautiful Mooresville, NC. This is a true machinist role - prove out program, operate, and QC parts.This is a Mazak house. Machines you will primarily be responsible for include:<ol><li>Mazak Variaxis i-700 with Smooth Control</li><li>Mazak Integrex i-250H-S &amp; i-200H-S with Smooth Control</li></ol>Pay💲 💰 &nbsp;: $30 - $38 per hour&nbsp;This is a hireCNC approved job. Impressive company with growth opportunities for machinists. 📈&nbsp;-----The CNC Multi-Axis Machinist will produce machined parts by setting up and operating 4 and 5-axis CNC machine tools. &nbsp;Responsibilities:&nbsp;<ul><li>Manufacture parts with 4 and 5-axis CNC machines by using industry standard machining techniques and practices while adhering to quality assurance procedures and processes.</li><li>Plan machining from work schedules and engineering drawings and CAD. &nbsp;</li><li>Work independently or with other Machine Shop staff to determine work holding, tool holding, and tools required for jobs.</li><li>Anticipate tooling and material needs, check inventory, and place orders with supervisor as needed.</li><li>Directly program using Mazatrol or load CAM program to CNC machines.</li><li>Manufacture parts using conventional machining equipment (manual machines, saws, etc.) and other CNC equipment as required.</li><li>Maintain and update manufacturing information as per company directive.</li><li>Maintain safe operations in compliance with safety procedures and regulations.</li><li>Maintain equipment by completing preventative maintenance requirements following manufacturer’s instructions and standards set forth by management. &nbsp;When necessary, repair machines and equipment and test operation of unit to ensure functionality and performance. &nbsp;</li><li>Use effective oral and written communication to include proper programming, set-up sheets and suggestions for improvement.</li><li>Accomplish organizational goals by accepting ownership and personal accountability for job done.</li><li>Responsible for keeping equipment and work area clean and orderly according to company standards.</li><li>Arrive on time for scheduled work, work overtime and weekends as necessary.</li><li>Be dependable and professional, act with integrity, work effectively with others, take initiative, and be willing to apply new knowledge and skills.</li><li>Other duties as assigned.&nbsp;</li></ul>Qualifications: &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;<ul><li>High school machining program and / or post-secondary technical school with earned diploma, certificate, or degree in machining trade training preferred.</li><li>5 years minimum experience operating 4 and 5-axis CNC machining centers and mill-turn machines. &nbsp;Mazak Mazatrol experience is a plus.</li><li>Must be able to work independently and possess strong CNC setup, operating, and machine G-coding abilities.</li><li>Experienced with precision measuring instruments, both digital and analog.</li><li>Can read and understand drawings and specifications with above average understanding of geometric tolerancing and dimensioning (GD&amp;T).</li><li>Knowledge of work holding, tool holding, and tooling equipment used in CNC working environment.</li><li>Must possess above average math skills.</li><li>Must possess basic computer skills.</li><li>Must be able to lift 50 lbs.</li><li>Must be able to adapt to frequent change, delays or unexpected events with a positive and constructive attitude.</li><li>Must be willing and able to work flexible hours due to changing work schedules and demands.</li><li>Must possess strong English communication skills (oral and written) as it relates to the job.</li><li>Must be able to produce parts to deadlines, accurate to the print and with a quality finish.</li></ul>

CNC Multi-Axis Machinist in North Carolina - Relocation $ Provided

Want to join a Modern Machine Shop Top Shop and help us disrupt the manufacturing industry by advancing the future of flight? If so, apply today to join our team!&nbsp;What You’ll Do<ul><li>Use Mastercam to develop CNC programs for aircraft and space engine hardware, continuously improving upon existing processes and updating programs accordingly</li><li>Define and maintain manufacturing processes by studying customer blueprints and testing manufacturing methods, tooling, and equipment</li><li>Utilize Solidworks to lead the design of work-holding and tooling to support production schedules.&nbsp;</li><li>Responsible for the design and development of work holding, custom tooling, and gauging to meet customer inspection specifications</li><li>Support the production floor by troubleshooting problems and implementing solutions to keep machines running conforming parts</li><li>Drive continuous improvement and cost reduction opportunities in machining processes by leveraging new cutting and automation tools with external vendors</li><li>Manage tooling being returned from completed jobs (evaluate condition, sharpen as needed, and put away in vending solution, etc.)</li><li>Maintain tool set up sheets, record programming changes, and sustain appropriate engineering paperwork</li></ul>What We Are Looking For &nbsp;<ul><li>Bachelor's or Associates Degree in Mechanical or Industrial Engineering or equivalent preferred</li><li>Minimum of 4 years of CNC programming in a machine shop required</li><li>Strong proficiency in GD&amp;T per ASME Y14.5M</li><li>Experience with Mastercam 2023/2024, certification a plus</li><li>Proficiency with Siemens and/or Fanuc controllers, DMG Mori machine tool experience is preferred</li></ul>Why Northeast Tool? &nbsp;<ul><li>Competitive pay&nbsp;</li><li>Medical, dental, vision, and life insurance&nbsp;</li><li>Company Matched 401K (Roth and Traditional)&nbsp;</li><li>Challenging and rewarding career</li><li>Family, team-focused working environment&nbsp;</li></ul>We believe the only way our company can grow is when we nurture the growth of our employees. We are committed to working hard, having fun, and making an impact in our community. Sound too good to be true? Apply today to join our team.&nbsp;

Northeast Tool & Manufacturing

Rethinking Precision Manufacturing

Manufacturing Excellence 

Multi-Axis Turning Applications

$100k - $140K CNC Programmer in Charlotte NC - Relocation $ Provided

This full-time on-site position located in West Chester, PA.Relocation is available for this career opportunity.Why Join the Acero Precision Team?Acero Precision, located in West Chester, PA is an industry leading Medical Device contract manufacturer producing the very best in precision engineered components. To succeed in today’s manufacturing industry- with its demands to serve customers in a truly global environment- we rely on three vital resources: the newest engineering technologies, quality systems, and most importantly highly skilled people. We invite you to become a member of an organization that has established an outstanding reputation for quality and excellence. Highly competitive wages, a state-of-the-art-facility, an emphasis on work/life balance, career advancement, a team-centered workplace culture, and the opportunity to be your best is waiting for you at Acero Precision.Our company promotes an environment that allows for continuous growth and promotion opportunities!What We Offer<ul><li>$40-$45/hr, or salary position with OT $120k-$130k</li><li>1st Shift: Premium Hourly Rate</li><li>2nd Shift: Premium Hourly Rate, Plus 15%</li><li>3rd Shift: Premium Hourly Rate, Plus 30%</li><li>Overtime</li><li>Additional Benefits for Weekend Hours in the Machining Departments</li><li>100% Employer Paid Medical Plan</li><li>100% Employer Paid Employee and Family Assistance Program (EAP)</li><li>100% Paid Uniforms</li><li>Dental / Vision Benefit Plans</li><li>Personal Time Off (PTO)</li><li>Paid Holidays</li><li>Relocation Assistance</li><li>Participation in Company 401k Plan with an Employer Percentage Match</li><li>Tuition Reimbursement.</li></ul>What You Will Do<ul><li>Use of CAD/CAM software and advanced machine shop mathematics.&nbsp;</li><li>Generate CNC programs for assigned product lines using CAD/CAM software and/or manual programming methods. Macro programming will be required in some instances.</li><li>Detailed understanding of blueprints including such aspects as geometric &amp; dimensional tolerances, notes, revisions, specification references and surface finish requirements.</li><li>Familiarity with different raw materials including aluminum, copper alloys, stainless steels, titanium, plastics and efficient ways of machining each of them.</li><li>Completes first article inspections for newly machined parts.</li><li>Detailed knowledge of the use and application of cutting tools. This includes sharpening, geometry, grades, coatings and trouble-shooting.</li><li>Maintain production goals through attention to the machining process from start to finish.</li><li>Understand the basics of Statistical Process Control, (SPC), and adjust the machines accordingly.</li><li>Detailed knowledge of measuring and inspection equipment. Develop ways to inspect parts more efficiently.</li><li>Continuously aware of visual defects such as out-of-tolerance surface finishes, burrs, staining etc.</li><li>The ability to inspect parts completely and accurately whether working to blueprint specifications or according to proprietary inspection software requirements.</li></ul>Who You Are<ul><li>Expert knowledge with Mazatrol and Mastercam.</li><li>At least three (3) years strong CNC programming, statistical methods, and CAD programs.</li><li>At least three (3) years CNC machining experience working several machines simultaneously, either Mazak Lathes/Machining Centers or Star Swiss Style Lathes.</li><li>At least three (3) years’ experience managing teams running several machines simultaneously.</li><li>Experience in mentoring and coaching Class 1 Machinists.</li><li>Experience in setting up and operating CNC Machines without support from engineering.</li><li>Experience in mentoring and coaching Machinists and Machining Assistants.</li></ul>&nbsp;Skills &amp; Competencies<ul><li>Have a mechanical aptitude (specific to manufacturing floor employees)</li><li>Knows tolerances and fits required on precision metal work.</li><li>Strong commitment to detail and error-free performance</li><li>Highly proficient in Microsoft Office suite</li><li>Excellent verbal skills</li></ul>Acero Precision is proud to be an Equal Opportunity Employer. Acero Precision does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status, or any basis covered by appropriate law. All employment is decided on the basis of qualifications, merit and business need.<h2>Qualifications</h2><h3>Behaviors</h3><h4>Preferred</h4><h5>Dedicated</h5><ul><li>Devoted to a task or purpose with loyalty or integrity</li></ul><h5>Detail Oriented</h5><ul><li>Capable of carrying out a given task with all details necessary to get the task done well</li></ul><h5>Leader</h5><ul><li>Inspires teammates to follow them</li></ul><h5>Team Player</h5><ul><li>Works well as a member of a group</li></ul><h5>Functional Expert</h5><ul><li>Considered a thought leader on a subject</li></ul><h5>Innovative</h5><ul><li>Consistently introduces new ideas and demonstrates original thinking</li></ul><h3>Motivations</h3><h4>Preferred</h4><h5>Ability to Make an Impact</h5><ul><li>Inspired to perform well by the ability to contribute to the success of a project or the organization</li></ul><h5>Growth Opportunities</h5><ul><li>Inspired to perform well by the chance to take on more responsibility</li></ul><h5>Self-Starter</h5><ul><li>Inspired to perform without outside help</li></ul>

Acero Precision

Mazak 5 Axis Mill Programmer

Great opportunity at a growing defense contractor with a state-of-the-art manufacturing facility.&nbsp;✔️ Paying $25 - $35 per hour depending on experience 💲 💰 &nbsp;✔️ Star swiss machines✔️ Complimentary breakfast and lunch everyday for all employees✔️ Fantastic benefits!✔️ There is plenty of growth opportunity at this shop 🚀 📈Apply now to explore further!---Gwynedd Manufacturing, a growing defense contractor located in North Wales, PA, is a state-of-the-art manufacturing facility dedicated to producing quality products for the U.S. Department of Defense and various U.S. Federal Law Enforcement Agencies. As an innovative company offering a wide array of products, we strive to continuously develop new technology and drive process improvement. The CNC Swiss Lathe Operator will fabricate metallic and nonmetallic parts using fit-for-purpose fixtures, tools and machines, including Computer Numeric Controlled (CNC) machines. Requires understanding of fundamental mathematics including basic geometry, making precise measurements with appropriate gauges, ability to perform simple deburr or polishing of metal components, and basic understanding of part handling and movement.Responsibilities<ul><li>Operate machines as programmed or perform manual processes with limited direct supervision, communicating any malfunctions or quality problems immediately to the supervisor.</li><li>Deburr/polish parts as they come off the machine in accordance with established work practices specific to the parts being made.</li><li>Check parts for visual defects and anomalies.</li><li>Use supplied gages and measuring equipment to ensure parts conform to all stated requirements from the process or operation just completed.</li><li>Apply knowledge of standard Mil-spec dimensions that are commonly used on our parts.</li><li>Meet production and quality goals.</li><li>Maintain machines as required and keep a clean and clear work area.</li></ul>Requirements<ul><li>Must be able to lift 50 pounds.</li><li>High school diploma or equivalent.</li><li>Basic math skills.</li><li>1-3 years as a Swiss Lathe Set Up Operator</li></ul>Gwynedd Manufacturing is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties and responsibilities. Management reserves the right to assign or reassign duties to this job at any time.Benefits<ul><li>Medical – IBC</li><li>Dental – The Standard Insurance Company</li><li>Vision – IBC – included in medical premium</li><li>Company Paid Life Insurance – The Standard Insurance Company</li><li>Group Additional Life and AD&amp;D Insurance-The Standard</li><li>Group Short and Long Term Disability Insurance- The Standard</li><li>401 (k) w/ match – Aon (VOYA) (90 Days after full-time hire)</li><li>Paid Time Off (PTO)</li><li>10 Company Paid Holidays</li><li>Complimentary breakfast and lunch everyday for all employees</li></ul>

CNC Swiss Lathe Set Up Operator

Great opportunity at a growing defense contractor with a state-of-the-art manufacturing facility.&nbsp;✔️ Paying $33 - $45 per hour depending on experience 💲 💰 &nbsp;✔️ Star swiss machines✔️ "PartMaker / NX CAD/CAM software✔️ Complimentary breakfast and lunch everyday for all employees✔️ Fantastic benefits!✔️ There is plenty of growth opportunity at this shop 🚀 📈Apply now to explore further!---Position Description:Gwynedd Manufacturing, a growing defense contractor located in North Wales, PA, is a state-of-the-art manufacturing facility dedicated to producing quality products for the U.S. Department of Defense and various U.S. Federal Law Enforcement Agencies. As an innovative company offering a wide array of products, we strive to continuously develop new technology and drive process improvement.As a CNC Swiss Lathe programmer, you will be responsible for reading and interpreting technical blueprints, inputting the design specifications, adjusting the machine cutting paths, and performing quality checks on the final product. You will also be required to setup the machines and troubleshoot any issues that arise during the manufacturing process. To ensure success as a CNC Swiss Lathe Programmer, you should have extensive experience working in manufacturing, a keen eye for detail, and the ability to work independently.Responsibilities :<ul><li>Analyzes drawings, models, and design data of part to determine best practices for selection of tool path, cutting tools and associated speed and feed data, according to knowledge of machine shop processes, part specifications, and machine capabilities</li><li>Computes angular and linear dimensions, radii, and curvatures, and outlines sequence of operations required to machine part using Partmaker/NX software</li><li>Determine zero offset positions at machine for programs</li><li>Set all tooling in machine</li><li>Writes instruction sheets and tool lists to guide setup and continued operation of machine</li><li>Compares computer printout with original program sheet to assure accuracy of machine instructions</li><li>Changes program to eliminate instruction errors or omissions</li><li>Observes operation of machine on trial run to prove programmed instructions</li><li>Ensures first article and first piece submissions are correct by working with quality team</li><li>Assist with development of senior operators and setup technicians</li></ul>Requirements<ul><li>Minimum of three years of CNC programming experience</li><li>Must be able to lift 50 pounds.</li><li>High school diploma or equivalent.</li><li>Basic math skills.</li></ul>Benefits<ul><li>Medical – IBC</li><li>Dental – The Standard Insurance Company</li><li>Vision – IBC – included in medical premium</li><li>Company Paid Life Insurance – The Standard Insurance Company</li><li>Group Additional Life and AD&amp;D Insurance-The Standard</li><li>Group Short and Long Term Disability Insurance- The Standard</li><li>401 (k) w/ match – Aon (VOYA) (90 Days after full-time hire)</li><li>Paid Time Off (PTO)</li><li>10 Company Paid Holidays</li><li>Complimentary breakfast and lunch everyday for all employees</li></ul>Gwynedd Manufacturing is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties and responsibilities. Management reserves the right to assign or reassign duties to this job at any time.Job Type: Full-time &nbsp;Pay: $33.00 - $45.00 per hour

CNC Swiss Lathe Programmer

Great opportunity at a growing defense contractor with a state-of-the-art manufacturing facility.&nbsp;✔️ Paying $50+ per hour depending on experience 💲 💰 &nbsp;✔️ "Develop, implement, and sustain machining and inspection processes that support our manufacturing operations."✔️ Complimentary breakfast and lunch everyday for all employees✔️ Fantastic benefits!✔️ There is plenty of growth opportunity at this shop 🚀 📈Apply now to explore further!---Gwynedd Manufacturing, a growing defense contractor located in North Wales, PA, is a state-of-the-art manufacturing facility dedicated to producing quality products for the U.S. Department of Defense and various U.S. Federal Law Enforcement Agencies. As an innovative company offering a wide array of products, we strive to continuously develop new technology and drive process improvement.The Manufacturing Engineer helps to develop, implement, and sustain machining and inspection processes that support our manufacturing operations. They will be engaged in all phases of the manufacturing effort from process design to the execution of the parts on the shop floor.<ul><li>Accountable for the manufacturing processes that deliver to the Business Plan. Machining, measurement, tooling, fixtures and CNC programs should be robust and designed to deliver Right First Time results and Product Flow to support best-in-industry manufacturing</li><li>Support capability acquisition and technology insertion necessary for product development and improvement in a very dynamic and competitive industry</li><li>Work closely with Design Engineering to evaluate and improve the manufacturability of products in the research and development stage as well as in mature production</li><li>Use engineering and manufacturing experience with independent judgment to evaluate, troubleshoot the machining process to improve tooling life, programming, and cycle time</li><li>Lead cross-functional teams to continuously improve processes and products</li><li>Communicate simply and effectively across all levels of the organization</li><li>Train machine operators on standard operating procedures and work instructions</li><li>Frequent work on the shop floor to execute new program and setups</li><li>Conventional machine shop experience along with 3 to 5 years of 4-5 axis CNC programming, insert tooling and machine tool operation experience</li><li>Knowledge of a wide range of manufacturing process types and applications</li><li>Ability to read and interpret blueprints. Knowledge of GD&amp;T use</li><li>Work holding selection and fixture design</li><li>Prepare work instructions and shop routers</li><li>Excellent interpersonal and teamwork skills</li><li>Ability to work independently in a fast-paced environment</li></ul>Requirements<ul><li>Experience using FeatureCAM, OptiCAM, PartMaker, PowerMill or NX</li><li>Ability to use all common inspection tools and gages</li><li>Basic ISO 9001 knowledge and understanding</li><li>Editing of CNC programs at the G and M Code level</li><li>BS in Engineering preferred</li><li>Local candidates only</li></ul>Gwynedd Manufacturing is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties and responsibilities. Management reserves the right to assign or reassign duties to this job at any time.Benefits<ul><li>Medical – IBC</li><li>Dental – The Standard Insurance Company</li><li>Vision – IBC – included in medical premium</li><li>Company Paid Life Insurance – The Standard Insurance Company</li><li>Group Additional Life and AD&amp;D Insurance-The Standard</li><li>Group Short and Long Term Disability Insurance- The Standard</li><li>401 (k) w/ match – Aon (VOYA) (90 Days after full-time hire)</li><li>Paid Time Off (PTO)</li><li>10 Company Paid Holidays</li><li>Complimentary breakfast and lunch everyday for all employees</li></ul>

CNC Programmer

Great opportunity at a growing defense contractor with a state-of-the-art manufacturing facility.&nbsp;✔️ Paying $75K - $80K per year 💲 💰 &nbsp;✔️ "Supervise daily manufacturing operations, ensuring adherence to safety, quality, and productivity standards."✔️ Complimentary breakfast and lunch everyday for all employees✔️ Fantastic benefits!✔️ There is plenty of growth opportunity at this shop 🚀 📈Apply now to explore further!---Gwynedd Manufacturing, a growing defense contractor located in North Wales, PA, is a state-of-the-art manufacturing facility dedicated to producing quality products for the U.S. Department of Defense and various U.S. Federal Law Enforcement Agencies. As an innovative company offering a wide array of products, we strive to continuously develop new technology and drive process improvement.We are seeking a proactive Manufacturing Supervisor to join our team. This role will be instrumental in leading a group of production employees in achieving production goals, ensuring quality standards are met, and fostering a safe and efficient work environment. The Manufacturing Supervisor will serve as a key link between production teams and upper management.Responsibilities<ul><li>Supervise daily manufacturing operations, ensuring adherence to safety, quality, and productivity standards.</li><li>Monitor production schedules and adjust resources to meet fluctuating demands.</li><li>Lead, train, and develop team members, promoting a culture of continuous improvement and competency enhancement.</li><li>Conduct regular performance evaluations and provide constructive feedback to team members.</li><li>Identify process inefficiencies and implement corrective actions to improve productivity and quality.</li><li>Ensure compliance with health and safety regulations, and promote a safe working environment.</li><li>Collaborate with engineering and quality departments to address and resolve production issues.</li><li>Maintain accurate records of production metrics, labor, and equipment performance.</li></ul>Requirements<ul><li>Minimum of 3 years of experience in a supervisory role within a manufacturing environment.</li><li>Comprehensive knowledge of manufacturing processes and principles of CNC machining a MUST</li><li>Excellent leadership skills with the ability to motivate and develop a team.</li><li>Strong communication and interpersonal skills for effective collaboration.</li><li>Ability to analyze data and metrics and make informed decisions.</li><li>Proficient in Microsoft Office and experience with ERP systems.</li><li>Bachelor's Degree in Engineering, Business, or related field preferred.</li><li>Familiarity with Lean Manufacturing or Six Sigma methodologies is a plus.</li></ul>Gwynedd Manufacturing is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties and responsibilities. Management reserves the right to assign or reassign duties to this job at any time.Benefits<ul><li>Medical – IBC</li><li>Dental – The Standard Insurance Company</li><li>Vision – IBC – included in medical premium</li><li>Company Paid Life Insurance – The Standard Insurance Company</li><li>Group Additional Life and AD&amp;D Insurance-The Standard</li><li>Group Short and Long Term Disability Insurance- The Standard</li><li>401 (k) w/ match – Aon (VOYA) (90 Days after full-time hire)</li><li>Paid Time Off (PTO)</li><li>10 Company Paid Holidays</li><li>Complimentary breakfast and lunch everyday for all employees</li></ul>

Manufacturing Supervisor

Bearon Manufacturing is looking for a CNC Machinist to join our team in our climate-controlled environment in Landisville, PA! On 3rd shift you will receive a 12.5% shift premium! As an experienced CNC Machinist with 5 years in the field, you’ll play a vital role in setting up, operating, and maintaining CNC Machines.&nbsp; You will also perform advanced setup operations; and adjust, program and operate numerically controlled machine tools to perform a complex series of progressive machining operations on a diversified line of work.&nbsp; May set up machines for and instruct other operators. The experienced candidate must possess a mechanical aptitude, have the ability to follow written instructions and read blueprint specifications with the ability to work independently.&nbsp; Join us to shape the future of our production operations!Sets-up, operates, and adjusts computer numerical controlled (CNC) machinery that automatically mills, punches, drills, broaches, threads, faces, reams, and occasional profiling and contouring of metal and/or plastic parts. Checks parts for conformance to specifications by utilizing measurement and gaging devices. Operator may run more than one unit simultaneously. Additional duties as needed.&nbsp;&nbsp;RESPONSIBILITIES: &nbsp;<ul><li>Prepare and operate CNC machines to make parts to customer specifications</li><li>Quality control and inspection of parts</li><li>Conduct routine machine maintenance, adhering to safety protocols</li><li>Documentation and reporting of production records and machine reports</li><li>Work as part of a team and identify improvements to the optimize machining techniques, programs, etc.</li></ul>COMPETENCIES:&nbsp;<ul><li>High School or equivalent degree required; trade school (can be in mechanics, auto, manufacturing etc.) preferred</li><li>Must have a minimum of 5 years experience operating CNC machines</li><li>Mechanical aptitude</li><li>Ability to develop programming skills</li><li>Great attitude and attendance</li><li>Ability to use hand tools and read blue prints</li><li>Ability to use measuring tools and shop mathematics</li><li>Ability to stand for 8 hours</li><li>Ability to lift up to 70 pounds over the course of a shift</li><li>Willingness to learn new things</li><li>Experienced CNC operator a plus</li><li>Metal manufacturing industry preferred</li></ul>The Dixon Group is committed to protecting the privacy rights of its employees and job applicants to the fullest extent required by applicable law.&nbsp; To that end, personal information will be collected&nbsp;solely for those legitimate business purposes recognized by law, and then maintained in a manner consistent with all applicable laws and regulations pertaining to document retention requirements.&nbsp; The Dixon Group does not sell personal information to third parties, and does not share such personal information with third parties except when authorized by law to do so (e.g., in response to a lawful subpoena; mandatory tax reporting; etc.) &nbsp; &nbsp; &nbsp;

Bearon Manufacturing

CNC Machinist

Imagine making an impact by participating in the inspection of castings and dimensional problem solving to improve and ensure the highest standard of quality for our customers! Bearon Manufacturing is searching for a CMM Operator to join our team on 2nd or 3rd shift. On 2nd and 3rd shift you will receive at 12.5% shift premium!If you are looking to advance your career and are passionate about product quality, have strong attention to detail and are willing to learn – we are searching for you!RESPONSIBILITIES:&nbsp;&nbsp;<ul><li>Operate the Coordinate Measuring Machine.</li><li>Interpret blueprint and/or CAD design and develop CMM computer program techniques for the dimensional inspection process</li><li>Perform first article dimensional inspection of parts</li><li>Evaluate and create inspection reports of measurement results in required format.</li><li>Perform and report routine in-process dimensional sample inspection of parts</li><li>Participate in dimensional problem-solving activities</li><li>Participate in gage and equipment calibration</li><li>Support daily production with measurements and CMM run needs</li><li>Help manage internal measurement tasks for production related programs.</li><li>Prepare metrology reports and other related correspondence.</li><li>General support for supplier quality measurements.</li><li>Perform measurements on 3-D measurement machine.</li><li>Perform measurements on 2-D measurement machine.</li><li>Provide and implement continuous improvement and cost saving ideas.</li></ul>COMPETENCIES:&nbsp;<ul><li>Ability to read, analyze, and interpret complex engineering documents</li><li>Ability to interpret and extensive variety of technical instructions in mathematical or diagram form.</li><li>Ability to comprehend nonverbal symbolism (formulas, scientific equations, graphs, etc.)</li><li>Ability to apply mathematical concepts such as Algebra, Trigonometry, and Geometry.</li></ul>The Dixon Group is committed to protecting the privacy rights of its employees and job applicants to the fullest extent required by applicable law.&nbsp; To that end, personal information will be collected&nbsp;solely for those legitimate business purposes recognized by law, and then maintained in a manner consistent with all applicable laws and regulations pertaining to document retention requirements.&nbsp; The Dixon Group does not sell personal information to third parties, and does not share such personal information with third parties except when authorized by law to do so (e.g., in response to a lawful subpoena; mandatory tax reporting; etc.)

Coordinate Measurement Operator

KMM Group offers rewarding opportunities to propel the world forward through mission critical components for air, space, life-saving equipment and more. You don't want to miss out on this opportunity! A few of our Company Values: Paid to Think Make it Fun Choose Positive Support Each Other Strive for Excellence Inspire Passion Sets up and operates a variety of Swiss machines to mill and/or turn metallic and nonmetallic work pieces to produce, maintain, or repair parts for customer requirements, applying knowledge of machine shop procedures , a variety of machine-tool setup and operating techniques, metal and plastic properties, and machining methods. . To set up and run various machines using the correct speeds, feeds, and tools to assure the machine is operating at its peak performance as well as assuring that the completed work meets all customer requirements.

45 Full Time Jobs in Pennsylvania