field_job_employment_type

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

field_job_salary_range

Manufacturing Engineer II CNC in GAC Savannah Unique Skills: About the Group: The supply Chain Engineering team works with our suppliers to provide recommendations on processes and answers technical questions. The team acts as a liaison engineering and our suppliers. About the Role: The Manufacturing Engineer II for this position should be an individual with extense experience on Machininig. Included but not limited to conventional machining, CNC Programing and CNC Equipment Operation for 3, 4 &amp; 5 axis. The ideal candidate should have experience working on the shop floor previously directly with Operations and experience with suppliers as a plus. Also tooling design, development and analysis related to tooling and CMM inspection are desirable, same as Project Management. Position can have peak times where can be traveling up to 40%. Typical is up to 25%, Education and Experience Requirements Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience. Position Purpose: Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment. Job Description Principle Duties and Responsibilities: Essential Functions: <ol><li> Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).</li><li> Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.</li><li> Author DRDI/DMT rework instructions to support effective corrective actions.</li><li> Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.</li><li> Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.</li><li> Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.</li><li> Investigate and assist in preparing justification for equipment and facility requests.</li><li> Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.</li><li> Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.</li><li> Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.</li><li> Incorporate Lean Manufacturing Methodology into existing and future processes.</li><li> With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.</li><li> Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.</li><li> Support all Safety, Sustainability and Ergonomic Initiatives. .</li><li> Aid in development and maintenance of Business Continuity Plan. .</li></ol> Additional Functions: <ol><li> Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. .</li><li> Initiate and maintain accurate daily/weekly activity status based on work output, as required. .</li></ol> Perform other duties as assigned. Other Requirements: <ol><li> Proven knowledge of Lean and/or Six Sigma principles. </li><li> Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. </li><li> Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. </li><li> Lean Six Sigma Greenbelt Certification or higher preferred. </li></ol> Additional Information Requisition Number: 222367 Category: Operations Engineering Percentage of Travel: Up to 25% Shift: First Employment Type: Full-time Posting End Date: 09/30/2024 Equal Opportunity Employer/Veterans/Disabled. Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Manufacturing Engineer II CNC

CNC Programmer/Manufacturing Engineer Job Overview: HF Custom/Sam Moore, a division of Hooker Furnishings Corporation, is seeking a dynamic and experienced CNC Programmer/Manufacturing Engineer to work in our Bedford, VA location. HF Custom/Sam Moore has been committed to crafting exceptional custom upholstery for over 80 years. Hooker Furnishings Corporation, in its 100th year of business, is a designer, marketer and importer of case goods, leather furniture, fabric-upholstered furniture, and outdoor furniture for the residential, hospitality, and contract markets. The CNC Programmer/Manufacturing Engineer will be an integral part of the engineering team and will lead the optimization of machining processes and machine tool capabilities for our new machine room. This position will report to the Director of Engineering. Key Responsibilities: <ol> <li>CNC Programming: <ul> <li>Analyze available information including part prints, manufacturing operation sheets, and part models for the creation and modification of CNC programs for various 2, 3, 4, and 5 axis machine tools.</li> <li>Handle multiple CNC program projects and work cross functionally with production, product development, and other departments across the organization. Write new programs and modify existing programs to improve processes.</li> <li>Collaborate closely with product development and design teams to translate product specifications into machine-readable code.</li> </ul> </li> <li>CAD/CAM: <ul> <li>Demonstrate proficiency in SolidWorks/Solid Edge/SolidCAM to create and modify design files and generate CNC programs.</li> <li>Collaborate with production, engineering, and product development to ensure integration between design software and CNC programming tools.</li> </ul> </li> <li>Setup, Troubleshooting and Testing: <ul> <li>Collaborate with production and engineering to oversee installation of new machines, set-up new machines, and assist with hiring and training of new machine operators.</li> <li>Once the machine is installed, perform comprehensive testing and troubleshooting of programs, using knowledge and skills to quickly identify and resolve issues promptly.</li> <li>Work closely with the production team to address operational challenges related to the programming.</li> <li>Have skills and knowledge to operate the machine smoothly. This is not an operator role but does require the knowledge and ability to be an excellent operator to train new operators and troubleshoot machines when needed.</li> </ul> </li> <li>Product Development Cross-Training: </li></ol> It is important that the person in this role has a comprehensive understanding of our engineering processes from design to production and therefore will have the opportunity to cross-train with our product development team initially on the following: <ul> <li>Create drawings for upholstered hardwood/CNC frames using Solid Edge.</li> <li>Create patterns both by hand and using Design Concept 2D.</li> <li>Develop prototypes and collaborate with plant operations to produce and test prototype frames to ensure they meet quality and industry standards.</li> <li>Approve frames for first production runs.</li> <li>Collaborate with design, quality, manufacturing, and engineering to integrate frames smoothly into the production process.</li></ul> Qualifications: <ul> <li>Proficient in drafting/modeling software</li> <li>Solid Edge/Solid Works/SolidCAM experience preferred</li> <li>B.S. or A.A. degree in manufacturing or engineering discipline or comparable experience preferred</li> <li>Minimum of two years of experience in a manufacturing/production environment</li> <li>Demonstrated experience with 3-axis CNC or Robotics (5 and 6 axis preferred)</li> <li>Working understanding of G-Code</li> <li>Ability to read schematics/blueprints</li> <li>Comfortable speaking and presenting information in groups of up to 10 people</li> <li>Ability to work under pressure with deadlines</li> <li>Proficient in Microsoft Office, specifically Excel</li> <li>ERP experience a plus (specifically D365)</li></ul>Work Location: This position will be based full-time in our Bedford, VA location, but will require up to 25% travel as needed in the first 6 months. After the first 6 months, the position will only require occasional domestic travel (10%). Why should you apply? <ul> <li>Competitive compensation and bonus plan.</li> <li>Successful and stable organization for over 99 years.</li> <li>A company committed to DEI (Diversity, Equity and Inclusion) values.</li> <li>Multinational, global organization with 11 locations in the US and offices in Vietnam and China.</li> <li>A caring, family focused culture.</li> <li>Strong corporate initiatives to continue to grow the organization.</li> <li>A culture that encourages forward thinking, team building and creative problem solving.</li> <li>Career development focus including training opportunities and leadership development programs.</li> <li>Tuition reimbursement program.</li> <li>Emphasis on charitable giving and volunteering in our communities.</li> <li>Focus on ESG (Environmental, Social, and Corporate Governance).</li> <li>Comprehensive medical, dental, vision plans including a generous employer health saving account (HSA) contribution each plan year.</li> <li>Matching 401k employer contributions.</li></ul>Pay: DOE

CNC Programmer/Manufacturing Engineer

Job Description General Dynamics Land Systems is a global leader in the design, development, production, support and sustainment of tracked and wheeled military equipment, specifically the Abrams Main Battle Tank and the Stryker Family of Wheeled Combat Vehicles. In this position you will be responsible for supporting all production processes and creating new production processes. There will be opportunity for maintaining and or improving established processes as well as working on Prototype work prior to production. Working to a set budget is critical. Must have extensive experience in CNC programming, modeling and CREO a plus. Responsibilities: Access / Navigate DNC software to create programs and load into CNC machines Access / Navigate Oracle to find tooling and components. Access / Navigate computer system to find part &amp; assembly drawings Create a basic Microsoft Excel Spreadsheet with Basic Formulas Create a basic Microsoft Power Point presentation Communicate progress and obstacles via E-Mail The ability to write work instructions Develop, and establish manufacturing process, primarily machining Design work holding devices in 3D CAD Create 2D drawings from 3D models Select Tooling, Feeds, &amp; Speeds for machining Aluminum, Armor, etc Write CNC Machine Tool Programs in a CAM system 2, 3, 4, 5, &amp; 7 Axis machines Establish Assembly processes and procedures Implement continuous improvement Ideas Other duties as required Systems used at GDLS Scranton include but not limited to: PTC Creo 5 for 3D Modeling and 2D Drawings Predator for DNC Storage and Communication Oracle for Business Software Gibbs CAM for CNC Programming HMS CAPP for Work Instructions Microsoft Excel, Power Point, Word, &amp; Outlook for documentation and communication Position Requirements High School Diploma minimum. Associate degree in Engineering preferred 5-7 years experience in CNC machining 3-5 years experience in CNC programing working with metals. Computer skills, email, Excel, PowerPoint, Word, 3D CAD (Creo a plus), CAM (GibbsCam a plus) Experience with 3D modeling software; experience with Pro-E (Creo) is a plus (Preferred) Personal time management and organizational skills Able to perform problem solving and root cause analysis Good communication skills, oral, written, &amp; visual Must be a US Person Headquartered in Reston, Virginia, General Dynamics is a global aerospace and defense company offering a broad portfolio of products and services in business aviation; ship construction and repair; land combat vehicles, weapons systems and munitions; and technology products and services. General Dynamics employs more than 100,000 people across 65 countries worldwide and in all 50 U.S. states, more information is available at <a href="http://www.gd.com" target="_blank">www.gd.com</a>. General Dynamics Land Systems, is a business unit of General Dynamics, and is an innovative leader of ground combat systems' equipment and software for our clients. Our performance-driven team partners with the U.S. Army, U.S. Marine Corp and other militaries across the Globe to ensure that next generation ground combat vehicles are ready to protect our fighting men and women in uniform. General Dynamics Lands Systems provides a competitive compensation package, site specific flexible work schedules, 401(k) with Company Match; Bonus Eligibility, Employee Development Opportunities, Tuition Reimbursement, On-site Amenities, and comprehensive Medical/Dental/Vision Insurance. At General Dynamics Land Systems, we strive to be champions who drive diversity, equity and inclusion. We are committed to our values and beliefs to provide a healthy and secure working environment that empowers team members to build careers that reward. We are focused on supporting an inclusive company that recognizes the value in creating a dynamic team that is diverse. As an Equal Opportunity Employer, General Dynamics Land Systems ("GDLS") provides all persons with equal opportunity and access to all aspects of employment process, without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, marital status, age, disability, status as a protected veteran, or membership in any group protected by federal, state, or local anti-discrimination laws. GDLS also is committed to providing reasonable accommodations to individuals with disabilities and disabled veterans.. If, due to a disability, you need an accommodation to search or apply for an opportunity with GDLS, please call 586-825-4000 or send an e-mail to [email protected] for assistance and let us know the nature of your request and your contact information.

CNC Programmer - Tool / Manufacturing Engineer

Date Posted: 2024-07-25 Country: United States of America Location: HFL04: ASG Jacksonville-Blount Island 6061 BF Goodrich Blvd , Jacksonville, FL, 32226 USA Position Role Type: Onsite Collins Aerospace is looking for a Senior Manufacturing Engineer, CNC Programmer who will provide operations with technical support, develop manufacturing process layouts, along with tool and fixture designs for Naval applications. You will also ensure that all production methodology meets customer requirements, productivity, and quality expectations. In addition, you will conduct product development projects within designated cost, quality, and timelines. <ul><li>The position is working onsite at our Blount Island Jacksonville FL facility.</li><li>Relocation assistance is available.</li><li>Position is working first shift initially, may at a future date move to second shift.</li></ul>What You Will Do <ul><li>Use knowledge of manufacturing processes and machine methodology; provide detailed drawings or sketches as guidance for drafting personnel to complete process sequencing.</li><li>Use knowledge of cutting tool technology, fixture design, machining, and CNC programming techniques, to establish best practices for production.</li><li>Continuously work with Machinists to improve machining efficiencies.</li><li>Responsible for the sustainment of standard machining techniques.</li><li>Utilize lean manufacturing methods to enhance manufacturing efficiencies and reduce costs.</li><li>Perform research for equipment acquisition; develop Return on Investment (ROI) reports for equipment acquisition justification.</li><li>Develop manufacturing methods and work instructions on new products or new equipment to meet productivity and quality requirements.</li><li>Ensure processes yield product that meets cost and quality expectations, with reliability and consistency.</li><li>Assist in determining tools, jaws, speeds, feeds, and fixtures to support manufacturing operations.</li><li>Develop documentation to support machining programs using Computer Aided Manufacturing systems, to meet production expectations of productivity, quality, and safety.</li><li>Support training of Production machinists in support of knowledge base growth and development.</li><li>Provide a high level of service to all internal and external customers; share knowledge and lessons learned, and contribute to positive teamwork environment.</li><li>Act as a troubleshooter for assembly / machining process / manufacturing problems.</li><li>Resolve problems and work with Applications Engineering, Purchasing, Quality Representatives, Product and Process Suppliers, and customers to resolve issues.</li><li>Maintain clean and safe work environment. Follow safety and environmental procedures and regulations. Report safety and environmental incidents to supervisor.</li><li>Perform other duties as assigned. Accomplish related results as needed.</li></ul>Qualifications You Must Have <ul><li>Requires a degree in Science, Technology, Engineering or Mathematics (STEM) unless prohibited by local laws/regulations and typically a minimum of 5 years prior relevant experience or an Advanced Degree in a related field and minimum 3 years of experience</li><li>The ability to obtain and maintain a U.S. government issued security clearance is required </li><li>U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance </li><li>CNC programming Mastercam &amp; Siemens NX experience</li><li>Manufacturing shop floor experience</li><li>Experience writing the programming and standard work instructions</li><li>Experience with Continuous Improvement (CI) tools and methodologies</li><li>Experience with MRP/ERP Systems</li></ul>Qualifications We Prefer <ul><li>Experience with Lean, Six Sigma, ACE or CORE</li><li>SAP experience</li><li>Experience with design: CATIA V, Solidworks, NX etc.</li><li>Microsoft 365</li></ul>What We Offer <ul><li>Medical, dental, and vision insurance </li><li>Three weeks of vacation for newly hired employees </li><li>Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option </li><li>Tuition reimbursement program </li><li>Student Loan Repayment Program </li><li>Life insurance and disability coverage </li><li>Optional coverages you can buy pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection </li><li>Birth, adoption, parental leave benefits </li><li>Ovia Health, fertility, and family planning </li><li>Adoption Assistance </li><li>Autism Benefit </li><li>Employee Assistance Plan, including up to 10 free counseling sessions </li><li>Healthy You Incentives, wellness rewards program </li><li>Doctor on Demand, virtual doctor visits </li><li>Bright Horizons, child and elder care services </li><li>Teladoc Medical Experts, second opinion program </li><li> And more! </li></ul>Learn More &amp; Apply Now Collins Aerospace, a Raytheon Technologies company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio, and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market. Our Advanced Structures team leverages advanced materials and additive manufacturing to develop complex interior and exterior solutions. These solutions ensure structural integrity of the aircraft, help aircraft take off and land, stay trim in the air, move forward, carry cargo and conduct rescues. We delight our customers with superior products and best-in-class service. Our global team is committed to continuous improvement - we work hard to make our solutions lighter-weight, stronger and more technically advanced, so that plane travel can be safer, more affordable, and more sustainable in the years to come. We are looking for the best and brightest to fly and land with us! #reempowerprogram This role is also eligible for the Re-Empower Program. The Re-Empower Program helps support talented and committed professionals as they rebuild their capabilities, enhance leadership skills, and continue their professional journey. Over the course of the 14-week program, experienced professionals will gain paid, on-the-job experience, have an opportunity to participate in sessions with leadership, develop personalized plans for success and receive coaching to guide their return-to-work experience. Upon completion of the program, based on performance and contributions participants will be eligible for a career at RTX. Minimum Program Qualifications <ul><li>Be on a career break of one or more year at time of application</li><li>Have prior experience in functional area of interest</li><li>Have interest in returning in either a full-time or part-time position</li></ul>Diversity drives innovation, inclusion drives success. We believe a multitude of approaches and ideas enable us to deliver the best results for our workforce, workplace, and customers. We are committed to fostering a culture where all employees can share their passions and ideas so we can tackle the toughest challenges in our industry and pave new paths to limitless possibility. WE ARE REDEFINING AEROSPACE. Please ensure the role type (defined below) is appropriate for your needs before applying to this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. Regardless of your role type, collaboration and innovation are critical to our business and all employees will have access to digital tools so they can work with colleagues around the world - and access to Collins sites when their work requires in-person meetings. At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again. The salary range for this role is 77,000 USD - 163,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Senior Manufacturing Engineer, CNC Programmer

Job Summary: Accountable for developing, improving, and supporting all production processes associated with the launch, manufacture, and test of products in an assigned value stream or product line. Often directs, guides, or mentors activities of Level I Process Engineers, prioritizing workload based upon needs of production floor. Essential Job Functions: <ul><li>Develops, evaluates, and improves manufacturing processes while maintaining compliance to design specifications.</li><li>Programming of equipment, creation of CNC code, and tool path simulation.</li><li>Primary contact for design engineering or program management on manufacturing processes.</li><li>Creates and maintains manufacturing methods, Bill of Materials, and labor standards in ERP system.</li><li>Participates in activities related to C.I. and cost reductions/process improvements.</li><li>Design, construction, and validation of tooling, fixtures, gages, and equipment.</li><li>Workflow / cell design with a focus on waste reduction and process improvement.</li><li>Analysis of manufacturing variances to help identify key areas in need of improvement.</li><li>Troubleshoot and solve manufacturing problems in a machining environment.</li></ul>Additional Duties: <ul><li>Support Supply Chain and Quality with supplier development activities as needed.</li><li>Mentor/guide level I manufacturing engineers.</li><li>Support customer complaints and concerns.</li><li>Provide support for Lean manufacturing and continuous improvement initiatives, companywide.</li><li>Other duties, reporting, special assignments, or projects as needed and assigned.</li><li>Must remain current with, and complete all required training as assigned.</li></ul><ul><li>Must adhere to Company Corporate EHS Policy and department, occupation, and task specific safety protocols, including but not limited to Personal Protective Equipment (PPE) requirements.</li></ul>Qualifications: <ul><li>5-10 years manufacturing engineering experience.</li><li>Hands on troubleshooting &amp; problem solving including statistical analysis.</li><li>Knowledge of both manual and CNC machining equipment.</li><li>Ability to implement change and train employees in a production floor environment.</li><li>Excellent technical, written, and oral communication skills.</li><li>Working knowledge of Microsoft products.</li><li>Ability to interpret 2D blueprints and 3D models. Working knowledge of GD&amp;T.</li><li>Minimum 5 years CAD and CAM software experience required. Mastercam preferred. AutoCAD Inventor preferred.</li></ul><ul><li>Must submit to and satisfactorily pass any pre-employment screening required for employment with the Company.</li><li>Must take medical exams required by law, in conjunction with occupation specific activities, the physical work environment, and ongoing industrial hygiene sampling results.</li><li>Depending on assignment, may be required to use stairs, remain upright and/or seated for prolonged timeframes, intermittently reposition the body per various tasks performed, and use various tools and work-related supplies.</li><li>May be required to perform manual lifting activities, not to exceed a 40lb lift performed by one individual.</li></ul>Education: Four-year degree in engineering preferred, but not required (mechanical, aerospace, or manufacturing preferred) OR 10-15 years of progressive manufacturing job responsibility in lieu of degree. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Process Engineer II, Machining

OPEN JOB: Senior Manufacturing Engineer (CNC and 5-Axis) LOCATION: East Aurora, NY (near Buffalo) SALARY: $120,000 to $140,000 Benefits - Full Relocation Assistance Available Interview Travel Reimbursed - Yes Industry: Aerospace / Defense Job Category: Engineering - Industrial / Manufacturing <ul> <li> Our customer, an aerospace manufacturing firm, is seeking a Sr. Manufacturing Engineer to take on a critical role in supporting the Prismatic (Complex Milling) Manufacturing Group located in East Aurora NY. </li> <li> The primary responsibility will be supporting the development of new product/development manufacturing processes, as well as applying continuous improvement manufacturing technologies to existing or mature production programs. </li> <li> In this role, you'll take ownership and drive results performing challenging and nonroutine manufacturing engineering applying standard engineering techniques, procedures, and "out of the box" thinking. In addition to accountability for the manufacturing processes in East Aurora, NY you will also help support our other aircraft facilities worldwide as required. </li> </ul> Here is what you can expect.... <ul> <li> Evaluate and develop new and emerging technologies in manufacturing engineering and production process development. </li> <li> Play a major role in coordinating Design for Manufacturing efforts amongst various development engineering groups for new and existing programs. </li> <li> Determine manufacturing procedures, operation sequencing, prepare tooling and gauge lists, create, and prove out N/C programs, writing of detailed operations sheets and work instructions to produce complex milled machined parts and sub-assemblies. </li> <li> Hands on approach in supporting continuous improvement efforts for existing production processes. </li> <li> Prepare, monitor, and update engineered or estimated time standards for set up and run hours, man to machine ratios and economic run quantities for each component's processes throughout the entire parts routing. </li> <li> Provide detailed cost estimates for new business capture and process improvement efforts. </li> <li> Leadership in new manufacturing capital equipment evaluation, justification, purchasing and implementation. </li> <li> Daily interaction with a variety of disciplines, including other Moog engineers, technicians, operations, and quality personnel, as well as external suppliers, to solve process related problems and mentor others. </li> </ul> <ul> <li> Work days are split between hands on shop interaction and office assignments. Many times, the Manufacturing engineers performs their own machine program proveouts side by side with shop personnel. </li> <li> Project leadership opportunities assigned by the Group Lead and/or Manufacturing Engineering Manager. </li> <li> Support of production automated manufacturing cells, driving process stability to achieve reduced attended labor and human factor variation. Assignment/Ownership of a dedicated manufacturing cell is likely. </li> <li> Some international and/or domestic travel as required (5% or approx. two weeks/year). </li> </ul> REQUIREMENTS: <ul> <li> Bachelor of Science Degree (Manufacturing, Mechanical, Industrial Eng or Tech). <ul> <li> Additional seasoned experience in manufacturing engineering that would be equivalent to what is learned in a degreed program would be reviewed for an acceptable alternative to the B. S. Degree requirement. </li> </ul> </li> </ul> <ul> <li> A minimum of 5 years Manufacturing Engineering with milled parts experience </li> <li> A minimum equivalent of 5 years hands on machining experience. </li> <li> CAD/CAM CNC milled parts programming experience (Siemens NX preferred). Fluent in G&amp;M Code programming. </li> <li> Strong cutting tool and workholding knowledge, selection, and design. Quick change and automation tooling/workholding experience a plus. </li> <li> Strong manufacturing process knowledge to create efficient CNC programs for complex milled parts. </li> <li> The ability to provide guidance and direction to other manufacturing engineers. </li> <li> Experience developing automated and advanced manufacturing systems. </li> <li> A "Lean Mindset" and leadership skills to drive change towards a "Lean factory" and "Standardized Work". (Lean belt certification a plus) </li> <li> Proficiency in blueprint reading and GD&amp;T </li> <li> 5-Axis Machining center programming experience required. The Global Machining Platform consists of Okuma MU-4000V, MU-5000V, MU-8000V and Mazak I-600 machines. Experience with these machines is a plus. </li> <li> Experience in machining a wide variety of Aerospace materials (Aluminum, Titanium, Stainless Steels, etc) on complex milled parts. </li> </ul> Skills <ul> <li> CNC machining experience </li> <li> CAD/CAM </li> <li> G&amp;M Code programming </li> <li> Cutting Tool </li> <li> 5-Axis machining center programming </li> <li> Complex Milled parts </li> </ul> If you are interested in pursuing this opportunity, please respond back and include the following: <ul> <li> MS WORD Resume </li> <li> required compensation. </li> <li> Contact information. </li> <li> Availability </li> </ul> Upon receipt, one of our managers will contact you to discuss the position in full detail. JASON DENMARK Recruiting Manager INTERMEDIA GROUP, INC. EMAIL: <a href="mailto:jdenmark@intermediagroup.com" target="_blank">jdenmark@intermediagroup.com</a> LINKEDIN: <a href="https://www.linkedin.com/in/jasondenmark/" target="_blank">https://www.linkedin.com/in/jasondenmark/</a> Steve Fleischner Intermedia Group, Inc. <a href="mailto:steve@intermediagroup.com" target="_blank">steve@intermediagroup.com</a> (212) 203-3666 <a href="http://www.intermediaqroup.com" target="_blank">www.intermediaqroup.com</a>

Senior Manufacturing Engineer (CNC and 5-Axis) - near Buffalo NY - to $140,000

Northern Gear and Machining is seeking an experienced CNC Manufacturing Engineer to collaborate with a team of people dedicated to the success of our customers. This role is responsible for the optimization of programming, improving existing processes, and implementation of the newest fixturing and tooling concepts. We are currently looking for someone with a solid background in the programming/Set-up of Mills. Responsibilities: <ul><li>Program CNC machines; Mills</li><li>Understand and select correct tooling and fixturing for Mills and Grinders</li><li>Produce parts within required tolerances and specifications.</li><li>Maintain involvement from set-up through 1st piece approval.</li><li>Process improvement</li><li>Develop set-up sheets and specifications for set-up.</li><li>Assist with troubleshooting of process related issues.</li><li>Stay relevant with the latest cutting tool technology and work holding.</li><li>Interface with Tool Crib</li><li>First piece approval responsibility</li></ul> This job description may not be inclusive of all assigned duties, responsibilities, or aspects of the job described. Qualifications: <ul><li>3+ years set-up and operation experience in a machining environment.</li><li>Experience with Master Cam, Solid Works, Cad Cam</li><li>A creative problem solver</li><li>Be able to work in a fast-paced environment.</li></ul> This position offers extensive opportunity for growth. Here at Northern Gear, you are not just a number, you are part of the family. Full Time / 1st Shift *Salary based on experience* APPLY TODAY!!

CNC Manufacturing Engineer

HYDAC is a family-owned and operated business with a vibrant and rewarding working environment for our employees across the country. Our goal is to provide quality products, components and services that meet our customer expectations while being committed to the protection and preservation of our environment. HYDAC's passionate team designs and manufactures a comprehensive line of innovative and reliable solutions optimized any demand our customers require. The Manufacturing Engineer is responsible for supporting the shop floor. You will ensure that design standards are being met. Will practice cost and productivity improvements. Finally, will coordinate and exercise functional authority for planning, organizational, control, integration, and completion of projects. You will make an impact in this role by: <ul><li>Provide technical support to manufacturing departments.</li><li>Ensure that production assembly and test methods are optimized and are consistent in meeting our cost targets.</li><li>Develop assembly and detail tooling drawings, floor layouts, and manufacturing cells.</li><li>Check drawings and deign work as needed.</li><li>Assist Materials Department in the selection of vendors.</li><li>Establish product acceptance criteria through preproduction runs.</li><li>Work with vendors to ensure the most economical manufacturing processes and tooling.</li><li>Assist the Quality Department in the development of procedures and work instructions.</li></ul>Requirements To be considered for the Manufacturing Engineering role, you must have the following minimum qualifications: <ul><li>Ability to apply principles of logic or scientific thinking to a wide range of intellectual and practical problems.</li><li>Ability to deal with nonverbal symbolism such as formulas, scientific equations, graphs, etc. in its most difficult phases.</li><li>Ability to deal with a variety of abstract and concrete variables. Ability to apply advanced mathematical concepts such as exponents, logarithms, quadratic equations, and permutations.</li><li>Ability to apply mathematical operations to such tasks as frequency distribution, determinations of test reliability and validity, analysis of variance, correlation, techniques, sampling theory, and factor analysis.</li><li>Knowledge of design software, database software, MS windows, and MS Word and Excel.</li><li>Able to read, write and comprehend English.</li><li>Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures or governmental regulations.</li><li>Blueprint interpretation.</li><li>Geometric dimensioning and tolerance is required. Familiar with computer-based system operation.</li><li>Knowledge of APQP, manufacturing and quality processes and capabilities.</li><li>Ability to write reports, business correspondence and procedure manuals.</li><li>Ability to effectively present information and respond to questions from groups or managers, client, customers, and the general public.</li><li>Self-starter and Motivator: Able to develop effective relationships with distributors, regional sales managers, and customers.</li><li>Speaks clearly and persuasively in positive and negative situations.</li><li>Listens and gets clarification.</li><li>Responds well to questions.</li><li>Participates in meetings.</li><li>Writes clearly and informatively.</li><li>Presents numerical data effectively.</li><li>Able to read and interpret written information.</li></ul>Education and Experience: <ul><li>Bachelor's degree in Engineering required, Mechanical or Manufacturing Technology degree preferred.</li><li>1-3 years prior Manufacturing Engineering experience in a manufacturing environment a plus.</li></ul>Click the "apply" button to be considered for this opening! HYDAC is committed to providing equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. #IND123

Manufacturing Engineer with CNC

Date Posted: 2024-06-28 Country: United States of America Location: PW100: East Hartford 400 Main Street, East Hartford, CT, 06118 USA Position Role Type: Onsite Pratt &amp; Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. Innovation through diversity of thought. At Pratt &amp; Whitney, we believe diversity of thought enables creativity, innovation, and a foundation for inclusion. By fostering an inclusive culture, we accept a shared accountability and responsibility to recognize, sponsor, coach, hire and promote talent equally. We welcome our employees to be their whole - best - selves at work because trust, respect and integrity, are a part of our DNA. At Pratt &amp; Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? What You Will Do: Hot Section Module Center is looking to hire a New Product Introduction (NPI) Coatings Manufacturing Engineer to support machining new parts in our Special Technologies business. The selected candidate will have the opportunity to work in a high technology, advanced program environment incorporating the latest manufacturing readiness assessment tools. They will partner with engineering, operations, and suppliers to evaluate the most efficient and cost-effective process design. The ideal candidate will develop manufacturing process alternatives based on improved manufacturability and producibility. Primary location in East Hartford CT and up to 20% travel may be required. Responsibilities: <ul><li>Develop tooling, process parameters, and controls to create a capable and stable process</li><li>Develop, test, and implement programs to machine hardware (milling, turning, grind, etc.)</li><li>Create work instructions for development hardware</li><li>Perform technology and process development tasks; including, first piece runs, measurement system analysis and capability assessments</li><li>Implementation of lean process improvements activities to meet schedule and cost targets</li></ul>Qualifications You Must Have: <ul><li>Bachelor of Science Degree in Mechanical Engineering, Manufacturing Engineering, Materials Science or other related Bachelors' degree</li><li>Experience in CNC machine programming</li><li>2+ years of engineering experience</li><li>CAD experience is required.</li><li>Must be a US Citizen due to Government Contracts</li></ul>Qualifications We Prefer: <ul><li>Proficiency in the application of continuous improvement tools: Process Certification, Value Stream Mapping, Standard Work, PFMEA, Six Sigma and/or Red-X</li></ul>Learn More &amp; Apply Now: In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines The salary range for this role is 64,000 USD - 128,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Privacy Policy and Terms: Click on this link to read the Policy and Terms

CNC Programmer Manufacturing Engineer (Onsite)

CNC Manufacturing Engineer Location: Sumter, SC About SKF: SKF has been making the world spin since 1907! SKF is an industry-leading manufacturer dedicated to a culture of belonging, where our people flourish in an equitable environment that promotes leadership development and career growth. SKF bearings played an integral role in helping Mars Rover collect rock and regolith samples on the planet's surface. As an SKF team member, you will join 40,000 colleagues from more than 130 countries developing bearing technology and services that make rotation more reliable and sustainable. Sustainability is at the heart of everything we do. SKF aims to have net zero greenhouse gas emissions at all our production facilities by 2030. SKF products keep vehicles rolling, power the machines that put food on your table, and even reach into the cosmos as part of the Mars rover mission. Founded in Sweden in 1907, today SKF is publicly traded on the Nasdaq Stockholm with annual sales in 2020 of approximately $10 billion. Position Summary: SKF in Sumter, S.C. is a world-class manufacturing site with a new line design and installation of state-of-the-art equipment and handling systems. SKF offers solutions around the rotating shaft, including bearings, seals, lubrication management, condition monitoring and maintenance services. The SKF Sumter, SC sites played an integral role in helping Mars Rover collect rock and regolith samples on the planet's surface. The Manufacturing Engineer performs engineering work varied in nature and complexity. The skills needed encompasses planning, evaluating, designing, developing and adapting tools, machines, and new technologies. This is for the purpose of producing new products, increasing productivity on existing products, enhancing quality and reducing manufacturing costs (i.e., the optimum use of workers, machines, materials and facilities). In this position you will work closely with other engineers, maintenance, logistics, manufacturing and quality to achieve optimum manufacturing objectives. This position's focus area will be multifunction machining centers for turning, milling, drilling and grinding. Responsibilities Include but Not Limited to: <ul> <li> Make mathematically/mechanical computations and independent analyses applying scientific and engineering principles, practices, and appropriate analytical tools. </li> <li> Develop capital plan and initiate appropriation requests (IRE's) for major projects. </li> <li> Establish systems for control of project progress, time schedules and costs. </li> <li> In conjunction with Accounting, prepares IRE post completion audits. </li> <li> Establish engineering and equipment standards for efficient application of resources and maintains records and files. </li></ul> Directly responsible for the engineering and related functions of his/her assigned manufacturing operation(s) including: <ul> <li> The setup and maintenance of labor standards . </li> <li> Development of the manufacturing process for new products and maintaining process documentation including manufacturing drawings, tooling, fixtures, BOM, process routings, SPI's, etc. </li> <li> Methods, processes, and procedure analysis and work simplification techniques. </li> <li> Designing and subcontracting of tools, fixtures, and gauging. </li> <li> Control NC/CNC functions, including setup sheets, DNC systems, and all other interacting projects, as well as the training of operators and others. </li> <li> Analyze and process engineering change requests. </li> <li> Plant, machinery, equipment, assembly layouts. </li> <li> Troubleshooting technically challenging problems (machinery, equipment, processes). </li> <li> Analyze for improvement to labor, manufacturing costs, variances and margins. </li> <li> Initiate cost reduction proposals and investigates proposals from other sources. </li> <li> Compile appropriate information, makes recommendations for action, implements (if appropriate) and checks on results obtained. </li> <li> Direct / oversee cost reduction and product / process improvement projects as assigned. </li> <li> Render technical service to all other departments as required. </li> <li> Lead or participate in development of Corrective Actions to address internal or externally identified problems. </li> <li> Manage / perform other duties and projects as assigned. </li></ul>Qualifications: <ul> <li> Minimally a B.S. in Mechanical Engineering or related degree plus 2 - 4 years of relevant experience. </li> <li> A minimum education requirement of a Technical Associate Degree/Apprenticeship Graduate plus at least 5 - 8 years of directly relatable or equivalent experience may be considered in lieu of degree. </li> <li> Working knowledge of Microsoft Office Suite required. </li> <li> Demonstrated ability to apply proper analytical and/or Lean tools in completion of their assignments. </li> <li> Metal working experience preferred (drilling, turning, taping, grinding &amp; selecting associated tools). </li> <li> CNC programming required, Hyper mill preferred. </li> <li> Manufacturing experience preferred (taking raw material and making finished product). </li> <li> Assembly experience preferred. </li> <li> Face to Face customer experience preferred. </li> <li> CAD/CAM, SolidWorks experience preferred. </li> <li> Knowledge of XA, SAP or other ERP system preferred. </li> <li> Experience in leading Capex projects preferred. </li> <li> Demonstrated problem solving required. </li> <li> Demonstrated ability to apply proper analytical and/or Lean tools in completion of their assignments. </li></ul>What You'll Love About SKF: Rest and Relaxation. Enjoy a generous PTO policy and 13 paid holidays. Work/Life Integration. SKF supports work/life integration, home, family, community, personal well-being and health. Flexible work options available, depending on role. Diversity in the Workplace. At SKF, we strive to embed Diversity, Equity, and Inclusion in everything we do. By developing a culture of belonging, our people can flourish; leading to an inclusive, equitable environment that promotes leadership, engagement, and innovation. Best in Class Benefits. SKF cares about the wellbeing of our employees. Comprehensive healthcare options to fit your needs and opt out payment. Added benefits include company paid life insurance, STD, LTD. Supplemental benefits include critical illness coverage, tuition reimbursement, employee discount programs, and much more! Invest in your Future. Participate in our 401K program that boasts a 10% employer contribution: 100% match up to 5% of your elected contribution (100% Vested) plus an additional 5% company contribution. Reports to: Manufacturing Engineer Manager Location: Sumter, SC Job ID: 19802 SKF provides equal employment [and affirmative action] opportunities to applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability. By applying to this job you acknowledge how SKF treats candidate data. Click HERE to review the SKF Data Privacy Consent Statement.

14 Manufacturing Engineer Jobs