field_job_employment_type

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

field_job_salary_range

CNC Machinists play a vital role within Bray Controls. If you are an experienced CNC Machinist, it's time to take that experience to the next level with Bray and use your machining background to advance your career. Bray compensates machinists for continuing their education in areas that will further their knowledge and expertise in performing the CNC Machinist role. Bray takes great pride in producing products of the highest quality and value and cannot fulfill that promise without experienced and valued CNC Machinists. CNC Machinists will be responsible for: <ul><li>Operating CNC machines safely and accurately</li><li>Making appropriate adjustments to CNC machines as needed</li><li>Reading blueprints and using precision measuring equipment to confirm dimensions and accuracy</li><li>Inspecting 1st article parts by using hand tools or CMM</li><li>Paperwork and documentation to assure proper procedure specifications are met</li><li>Inspecting samples for production specifications</li><li>Working with little or no administrative support</li><li>Maintaining a healthy and clean work environment</li><li>Following company production procedures</li><li>Adapting to change and new situations</li><li>Expressing opinions openly while managing conflict and moving your team toward problem resolution</li><li>We have 1st shift and 2nd shift open</li></ul> Qualifications: <ul><li>At least 5-10 years' experience in setting up and operating CNC machines</li><li>High School diploma or equivalent</li><li>Ability to use basic computer programs</li><li>Good communication skills with the ability to effectively communicate within a team environment.</li><li>High energy, flexible, self-starter</li><li>Attention to detail and precision in work</li></ul> Please Note <ul><li>Immigration sponsorship not offered for this position</li><li>Staffing and recruiting agencies are not invited to submit candidates for this job posting</li></ul> Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

CNC Machinist - 1st Shift

Qualifications Demonstrated experience in electrical and/or electronic and mechanical maintenance including motors, controls, power supplies, AC/DC theory, power distribution, PLC's, hydraulics/pneumatics, lubrication, and power transmissions. Demonstrated ability to follow all established safe work procedures including, but not limited to personal protection equipment, safety lockout/tag-out, confined space, and elevated work areas. Responsibilities <ul><li>Set up CNC lathes and mills for new operations.</li><li>Ensures operation of CNC machines and mechanical equipment by completing preventive maintenance requirements on machining lathes and mills, motors, pneumatic tools, and production equipment; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions.</li><li>Mechanic skills include, but not limited to, mechanical, electrical, pneumatic, hydraulic troubleshooting and repair.</li><li>Locates root cause of problems by using sound troubleshooting methods to ensure that permanent repairs can be made to minimize costly downtime.</li><li>Install, service, troubleshoot, and repair all types of machine control components including, but not limited to; motor drives, controllers, sensors, switches, breakers, overloads, power supplies, etc.</li><li>Install, service, troubleshoot, and repair all types of power transmission components including, but not limited to; drives, bearings, gears, belts, chains, sprockets, etc.</li><li>Install, service, troubleshoot, and repair hydraulic systems including, but not limited to: tanks, pumps, valves, piping, cylinders, and controls.</li><li>Provide proper record keeping, documentation, and information for, but not limited to Machine files, repair files.</li><li>Comply with safety regulations and maintain clean and orderly work areas.</li><li>Read and interpret blueprints, technical parts manuals such as electrical and mechanical diagrams, gages, meters, calipers and other measuring tools.</li><li>Use all required hand and power tools including, but not limited to: drill, saw, torch, and jacks, as well as ladders, cranes, fork lift, and other maintenance equipment.</li></ul> This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing during shift

CNC Maintenance Technician

Position Summary: The CNC Machinist will set up and operate CNC equipment to produce parts to specified tolerances of blueprints in above average time without assistance. You should be able to apply knowledge of machine shop theory and procedures, shop mathematics, machinability of materials, and layout techniques. Essential Duties and Responsibilities: <ul><li>Perform operational functions of CNC machines. </li><li>Maintain acceptable reject, scrap rates, and production rates.</li><li>Identify problems and be able to correct most of them with little assistance. </li><li>Mount, align, and secure tooling, attachments, and work piece on machine. </li><li>Install cutting tolls in machine. </li><li>Calculate and set machine controls to position tools in relationship to work piece and to regulate factors, such as cutting depth, speed, feed, and coolant flow.</li><li>Start machine and monitor displays and machine operations to detect malfunctions.</li><li>Stop machine to change cutting tools and setup according to required machining sequence or to measure parts for conformance to blueprint specifications, using precision measuring instruments, without supervision. </li><li>Maintain proper maintenance of machine, equipment and facilities and keep in proper condition.</li><li>Follow all oral and written instructions correctly.</li><li>Required to hold tolerances within .0005 or as required by blueprints.</li><li>Responsible for recording all labor hours with time system accurately. </li><li>Handle machine finished items in a careful manner to prevent damage, maintain a neat and orderly work area, and function in a safe and reliable manner to prevent personal injury and/or property damage.</li><li>May assist in training new employees in proper machining techniques.</li><li>Responsible for cleaning machine and area prior to leaving each day.</li><li>Assist in training new employees on equipment techniques.</li></ul>Qualifications: <ul><li>Minimum of 5yrs experience required.</li><li>Ability to work in a team-oriented environment.</li><li>Ability and desire to be at work on time and learn new skills.</li><li>Ability to set-up and run CNC mill or lathe with no assistance and troubleshoot same programs for potential errors. </li><li>Ability to read and interpret blueprints. </li><li>Meets or beats production standards 95% of the time. </li><li>Able to completely inspect machined parts. </li><li>Ability and willingness to assist in training new employees in proper machining techniques.</li><li>Ability to read a measuring tape, micrometer, and calipers.</li><li>Familiar with Puma 700 L, CNC lathe.</li><li>Capable of using an overhead crane and sit-down forklift.</li><li>Able to follow safety guidelines and procedures.</li><li>Manual machine experience a plus. </li><li>Must be able to work Saturdays as needed. </li></ul>The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.

CNC Lathe Machinist

JOB SUMMARY Rotating Machinery Services, Inc (RMS Inc.) is seeking a qualified CNC Machinist to work 2nd shift (3pm to 11pm) and perform a variety of machining practices involved in turning, milling, drilling, threading operations, etc. on rotating equipment components (pumps, turbines, compressors, and more) and assemblies to ensure compliance with specifications and quality requirements. JOB REQUIREMENTS AND QUALIFICATIONS <ul><li>Ability and willingness to be in the shop environment a minimum of 8 hours per day, primarily standing and sitting.</li><li>Ability and willingness to work around and use large propane / acetylene.</li><li>Ability to operate small lifts, pallet jacks and other lifting equipment (training will be provided on our specific equipment, but basic skills are required beforehand).</li><li>Advanced oral and written communication.</li><li>Advanced math skills to calculate tolerances and dimensions.</li><li>Must be able to read and understand Blueprints and G-Code.</li><li>Must be familiar with basic machining practices involved in turning, milling, drilling, threading operations.</li><li>Must be competent reading drawings and following instructions necessary to produce usable and saleable parts.</li><li>Must be proficient with the use of, the care of, and the calibration of all types of measuring devices (i.e., micrometers (OD and ID), dial calipers, dial indicators, etc.).</li><li>Must possess and provide basic tools required for the execution of the position of machinist.</li><li>Must be able to comply with all safety directives and programs established by the Company and or our customers.</li></ul> The above list of activities is not all inclusive but a general representation of the requirements of an RMS Inc. Machinist. This list is subject to change based on the needs of the company. Education: <ul><li>High School Diploma / GED from an accredited school or institution.</li></ul> Knowledge and/or Skill Requirements: <ul><li>OMEGA experience </li><li>Proficient in running horizontal lathes, milling machines, VTL, and Bullard.</li><li>Capable of reading drawings and proper use of calibrated measuring tools.</li><li>Read drawings and use of micrometers.</li><li>Basic machining knowledge and practices required.</li><li>While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift.</li><li>Ability and willingness to lift objects weighing up to 50 lbs., walk, climb, reach, kneel, crawl, and balance.</li><li>Must be able to use hands for assembly and tool.</li></ul> Previous Experience: <ul><li>10 years or more of Machinist experience required.</li></ul> OTHER INFORMATION The position will be based full time in our Pearland Works facility (77047). Physical Requirements: <ul><li>While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift.</li><li>Ability and willingness to lift objects weighing up to 50 lbs., walk, climb, reach, kneel, crawl, and balance.</li><li>Must be able to use hands for assembly and tool.</li></ul> Work Environment: While performing the duties of this position, the employee will be regularly exposed to moving mechanical parts in a machine-shop environment. WHAT WE OFFER <ul><li>Competitive Pay</li><li>Paid Time Off</li><li>Medical / Dental / Vision</li><li>401k </li><li>Employee Incentive Programs</li><li>Employee Reimbursement Programs</li><li> Tool, Shoe, and Safety Glasses reimbursement</li><li>Uniform Service </li></ul> Come Join Rotating Machinery Services Inc. and watch your Career go TURBO! Visit <a href="http://www.rotatingmachinery.com" target="_blank">www.rotatingmachinery.com</a> to learn more about who we are and what we do. ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise-all backed by responsiveness in competitive prices and lead times. RMS' commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

2nd Shift CNC Machinist

Job Type Full-time Description A CNC Operator, or CNC Machinist, is in charge of operating the computer numerical control (CNC) machine. They produce machined parts according to established parameters and specifications. Some perform inspections of industrial machines and work areas. A CNC Operator also calibrates all machines to their proper operating levels. A CNC Operator primarily carves and shapes plastics, metals and woods. A vital part of their job is ensuring the accuracy of their machinery. The CNC Operator is expected to perform duties and responsibilities that include: <ul><li>Using the CNC machine</li><li>Operating industrial machinery, which can include a hydraulic press, grinder, borer or overhead crane • </li><li>Fitting the right tools to active machines • </li><li>Performing proper set-up and calibration procedures for all equipment and accessories • </li><li>Setting tolerance levels and cutting speeds</li><li>Translates the requirements of detailed part drawings into measurements for production</li><li>Inspecting workflows to ensure that technical and quality standards are met</li><li>Devising a work plan to efficiently carry out daily machining</li></ul>

CNC Machinist

JOB SUMMARY Rotating Machinery Services, Inc (RMS Inc.) is seeking a qualified CNC Machinist to work 1st shift and perform a variety of machining practices involved in turning, milling, drilling, threading operations, etc. on rotating equipment components (pumps, turbines, compressors, and more) and assemblies to ensure compliance with specifications and quality requirements. JOB REQUIREMENTS AND QUALIFICATIONS <ul><li>Ability and willingness to be in the shop environment a minimum of 8 hours per day, primarily standing and sitting.</li><li>Ability and willingness to work around and use large propane / acetylene.</li><li>Ability to operate small lifts, pallet jacks and other lifting equipment (training will be provided on our specific equipment, but basic skills are required beforehand).</li><li>Advanced oral and written communication.</li><li>Advanced math skills to calculate tolerances and dimensions.</li><li>Must be able to read and understand Blueprints and G-Code.</li><li>Must be familiar with basic machining practices involved in turning, milling, drilling, threading operations.</li><li>Must be competent reading drawings and following instructions necessary to produce usable and saleable parts.</li><li>Must be proficient with the use of, the care of, and the calibration of all types of measuring devices (i.e., micrometers (OD and ID), dial calipers, dial indicators, etc.).</li><li>Must possess and provide basic tools required for the execution of the position of machinist.</li><li>Must be able to comply with all safety directives and programs established by the Company and or our customers.</li></ul> The above list of activities is not all inclusive but a general representation of the requirements of an RMS Inc. Machinist. This list is subject to change based on the needs of the company. Education: <ul><li>High School Diploma / GED from an accredited school or institution.</li></ul> Knowledge and/or Skill Requirements: <ul><li>OMEGA experience </li><li>Proficient in running horizontal lathes, milling machines, VTL, and Bullard.</li><li>Capable of reading drawings and proper use of calibrated measuring tools.</li><li>Read drawings and use of micrometers.</li><li>Basic machining knowledge and practices required.</li><li>While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift.</li><li>Ability and willingness to lift objects weighing up to 50 lbs., walk, climb, reach, kneel, crawl, and balance.</li><li>Must be able to use hands for assembly and tool.</li></ul> Previous Experience: <ul><li>10 years or more of Machinist experience required.</li></ul> OTHER INFORMATION The position will be based full time in our Pearland Works Facility. Physical Requirements: <ul><li>While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift.</li><li>Ability and willingness to lift objects weighing up to 50 lbs., walk, climb, reach, kneel, crawl, and balance.</li><li>Must be able to use hands for assembly and tool.</li></ul> Work Environment: While performing the duties of this position, the employee will be regularly exposed to moving mechanical parts in a machine-shop environment. WHAT WE OFFER <ul><li>Competitive Pay</li><li>Paid Time Off</li><li>Medical / Dental / Vision</li><li>401k </li><li>Employee Incentive Programs</li><li>Employee Reimbursement Programs</li></ul> Come Join Rotating Machinery Services Inc. and watch your Career go TURBO! ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise-all backed by responsiveness in competitive prices and lead times. RMS' commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

1st Shift CNC Machinist

For over 140 years, our products have helped ensure the safe, reliable operations of key industries. With a passion for precision and partnership, Celeros Flow Technology ("Celeros FT") continues this heritage of high performance and dependability, providing mission-critical, sustainable flow control solutions for our customers around the globe. We are seeking a CNC Machinist for our facility in Houston, TX. Must have mill and lathe experience. Hours 1:30pm to 10pm - 2nd shift Monday through Friday Pay ranges from $32 to $36 per hour - depending on experience. In addition, we offer a full benefit package, shift differential, and quarterly bonus programs! JOB SUMMARY The Machinist will assess and diagnose possible problems with hydraulic and mechanical equipment. There will be an emphasis on pumps or rotating equipment in a shop environment. You'll work collaboratively with other multi-skilled technicians under the direction of the Shop Supervisor. PRINCIPAL DUTIES AND RESPONSIBILITIES <ul> <li>Setting up and operating various machines and tools on a singular basis.</li> <li>Manual milling machines - Devlieger setup and operation</li> <li>Reading and interpreting work orders to select proper work center and identify required tooling and/or programs necessary to perform the operation.</li> <li>Obtaining and installing proper tooling, such as jaws, chucks, tombstones, fixtures, and cutting tools.</li> <li>Using various gauges and precision instruments (i.e. intra-mics, profilometers for finish surface requirements, calipers, IDOD micrometers, indicators, and special gaging equipment, etc.) to inspect production pieces to make necessary program and tooling adjustments.</li> </ul> <ul> <li>Setting up and running CMM as necessary.</li> <li>Cleaning and removing burrs after the operation is completed.</li> <li>Assisting manufacturing engineering in process improvements.</li> <li>Training other employees on a variety of machine tools and operations.</li> <li>Returning tooling and reporting any difficulties with tooling or material.</li></ul>KNOWLEDGE, SKILLS &amp; ABILITIES <ul> <li>Read, write, speak and comprehend English.</li> <li>Add, subtract, multiply, divide and work with fractional measurements and decimals.</li> </ul> <ul> <li>Set up, adjust, and operate all machine tools in your area of responsibility in order to produce various parts within specifications from blueprints.</li> <li>Read and understand basic manufacturing mechanical blueprints, and use good basic math skills in addition, subtraction, division and multiplication.</li> <li>Work accurately with basic keyboard and monitor interfaced with the mainframe computer to enter work order data and correct qualities as required.</li> <li>Hold very close tolerances and surface finish requirements.</li> <li>Exceptional teamwork skills and strong communication abilities.</li> </ul> <ul> <li>Working knowledge or ability to learn to use a micrometer, depth micrometer, dial indicators, CMM, and other precision measuring instruments.</li> <li>A demonstrated history of good attendance and a safe work record.</li></ul>EDUCATION AND EXPERIENCE <ul> <li>A high school diploma or GED equivalent.</li> </ul> <ul> <li>8+ years of manual machining working with manual engine lathes, VTL's, HBM's and surface grinders</li> <li>Experience working with very tight tolerance of +/- .001.</li> <li>The ability to read and interpret drawings, blueprints and other documents.</li> <li>Proficiency with measuring equipment, such as calipers, gauges and micrometers.</li> <li>Computer proficiency.</li> </ul> <ul> <li>Experience working with stainless steel or duplex stainless steel preferred.</li> <li>Horizontal mill experience preferred.</li> <li>Lean manufacturing methods preferred.</li> </ul> Celeros Flow Technology is an equal-opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Applicants must have current authorization to work in the country in which the position is located to be considered.

Essential Duties and Responsibilities:To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below: <ul><li>Has the ability to setup and operate at least three of the following pieces of steel processing equipment:</li><ul><li>Large Plate Rolling machine</li><li>Small Plate Rolling machine</li><li>CNC Vertical Mitering Band Saw with bar feeder</li><li>CNC Plasma Plate Cutting Table</li><li>OxyFuel Plate Cutting Table</li></ul><li>Operates portable power tools such as large and small grinders.</li><li>Operates stationary tools such as bench grinder, iron worker, drill press and chop saw.</li><li>Operates overhead crane, forklift and other lifting equipment.</li><li>Perform routine inspections on equipment and components.</li><li>Transcribe work order, part and heat numbers to material drop and traceability documents.</li><li>Ability to work closely with Quality Department concerning min. thickness, roundness, NDE requirements and scheduling</li><li>Issue plate, rolled material, saw cut material lengths and associated drops to corresponding job/work order.</li><li>Coordinate material requirements with forklift operator.</li><li>Verify material grade and size matches cut list prior to cutting.</li><li>Monitors inventory levels on consumables, i.e. saw blades, coolant and lubrication and reports to supervisor.</li><li>Reports problems to line supervisor and actively participates in resolutions.</li></ul>Requirements: Education and/or Experience, Knowledge, Skills &amp; Abilities: To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The requirements for this position are listed below: <ul><li>High School diploma or GED</li><li>2+ years' experience in steel fabrication related environment</li><li>CNC Software programs</li><li>Experience in welding processes (SAW, FCAW, GMAW).</li><li>Knowledge of steel material grades.</li></ul> Required experience is commensurate with the selected job level: <ul><li>Level C requires a minimum of 0 - 2 years of relevant industry experience or equivalent work experience</li><li>Level B requires a minimum of 2 - 4 years of relevant industry experience or equivalent work experience</li><li>Level A requires a minimum of 4+ years of relevant industry experience or equivalent work experience</li></ul> Preferred Qualifications <ul><li>Performs job duties in a safe manner and according to company safety procedures.</li><li>Maintains a clean and safe working area.</li><li>Reports potential safety hazards to supervisor immediately and actively participates in resolutions.</li><li>Ability to read tape measures and rulers in increments of 1/16"</li><li>Basic mathematic ability to add and subtract fractions, decimals and whole numbers. </li><li>Must have knowledge of commonly-used concepts, practices, and procedures within a fabrication and weld shop.</li><li>Must be familiar with Safety and OSHA requirements within a welding environment.</li></ul>Working Conditions The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. <ul><li>Lifting up to 50 lbs. occasionally</li><li>Driving, walking, and standing frequently</li><li>Exposure to adverse weather, cramped conditions and some heavy lifting</li><li>Visits to industrial/manufacturing settings, which may include exposure to various materials and chemicals, as well as extreme temperature conditions and loud machinery, and require appropriate personal protective equipment</li></ul>

CNC Operator

Working at Freudenberg: We will wow your world! Responsibilities: <ul><li>Study blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished workpiece, sequence of operations, and setup requirements</li><li>Measure, mark, and find reference points on material or workpiece as guides for subsequent machining</li><li>Select, align, and secure holding fixtures, cutting tools, attachments, accessories, and materials on 4 Axis CNC Machining Center/Mill</li><li>Calculate and set controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut, (optional) enter commands to retrieve, input, or edit computerized machine control media</li><li>Start and observe machine operation to detect malfunctions or out-of-tolerance machining, and adjust machine controls or control media as required</li><li>Verify conformance of finished workpiece to specifications</li><li>Set up and operate machine to verify accuracy of machine settings or programmed control data</li><li>Confer with engineers, production personnel, programmers, or others to resolve machining or assembly problems</li></ul>Qualifications: <ul><li>Microsoft Office proficiency</li><li>Ability to study and read blueprints, sketches, and drawings</li><li>Knowledge and proficiency in Metric Measurement System (can be trained)</li><li>Ability to produce high precision parts with close tolerances</li><li>Preferred seal manufacturing/rotating equipment industry experience</li><li>Stainless steel and alloy experience</li><li>Minimum of 5 years of experience in conventional, non-conventional, CNC Mills</li><li>CNC Mill set-up (Machining center/Mill)</li><li>Capable of advanced milling setup</li><li>3+ years' experience in Mazatrol a plus</li><li>Fluently speak English</li></ul>The Freudenberg Group is an equal opportunity employer that is committed to diversity and inclusion. Employment opportunities are available to all applicants and associates without regard to race, color, religion, creed, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity or expression, national origin, ancestry, age, mental or physical disability, genetic information, marital status, familial status, sexual orientation, protected military or veteran status, or any other characteristic protected by applicable law. EagleBurgmann Industries LP

16 Full Time Jobs in Houston, TX, USA