field_job_employment_type

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

field_job_salary_range

Part Time Instructor: CNC Programming and Machine Tool Operation (WDC) Overview: Cincinnati State's Workforce Development Center (WDC) is the region's premier workforce training provider. Located at the Evendale campus, this division serves local businesses and individual students in developing industry-relevant skills for today's changing workplace. As a separate profit center, the WDC supports the college mission by offering custom, fast-paced programs that help people gain skills quickly and set them up for future professional and academic success. Cincinnati State Technical and Community College, Workforce Development Center, is recruiting a part-time trainer to teach technician-level training in CNC Programming and CNC Machine Tool Operation. The position requires hands-on experience in advanced manufacturing using G &amp; M code programming. Essential Duties: <ul> <li>Deliver learning-centered instruction by establishing a classroom environment conducive to learning and student involvement as well as effectively planning and preparing for classes and student success.</li> <li>Adequately prepare all course materials and lessons. Note preparation time will vary based on instructor experience in teaching that course</li> <li>Provide each student with clear course expectations, evaluations and timelines through carefully written topical outlines and approved, standardized syllabus</li> <li>Provide Interesting and relevant assignments for students that demonstrate learning outcomes in a real-life setting</li> <li>Suitably challenge, engage, serve and communicate with students to encourage their participation and learning while maintaining mutual value and respect</li> <li>Complete grade books, final grade sheets, learning assessments and final exam assessments on a timely basis</li> <li>Ensure course and program learning outcomes are delivered as defined by the syllabus.</li> <li>Maintain a paper or electronic record (i.e., spreadsheet or grade book) of each student's progress and has it available upon request by students and/or appropriate College personnel.</li></ul>Minimum Qualifications: <ul> <li>High School Diploma or GED.</li> <li>At least 5 years' experience working in a manufacturing or engineering environment utilizing 5- axis machining centers processes and systems</li> <li>At least 3 years hands-on industry or business experience in the teaching subject area</li> <li>Knowledge and experience working with computer and working knowledge in Microsoft Office products</li></ul>Preferred Qualifications: <ul> <li>Bachelor's Degree from an accredited college or university in Engineering, or related subject. 3 years' experience teaching/training</li> <li>10+ years of industry experience in engineering or manufacturing with direct experience in Manufacturing Technology utilizing 3-axis and 5-axis machining processes and systems</li></ul>Desired Competencies: <ul> <li>Possess the ability to work in a diverse work environment.</li> <li>Demonstrated excellent relationship building skills, sales skills, organizational skills and strong written/oral communication skills.</li> <li>Demonstrated team player that is self-motivated with the willingness to share knowledge and skills with co-workers.</li> <li>Knowledge and skills in a variety of computer usage and software are required.</li> <li>Excellent interpersonal skills and the ability to communicate effectively with a diverse professional, community, and student population.</li> <li>Self-disciplined and ability to multi-task, adapt to job or organizational changes. Use critical thinking skills</li> <li>Ability to identify problem(s) and solve them through a logical, collaborative process.</li></ul> Physical Requirements: <ul> <li>Ability to stand and walk for up to 8 hours at a time</li> <li>Ability to lift/move packages (up to 40 lbs.) on an intermittent basis Ability to climb stairs and ladders</li></ul>Work Schedule: Part-Time, as-needed (not to exceed 29 hours/week) Details: Reports To: Assistant Business Manager, Manufacturing, WDC Position Level: Trainer Comp. Range: $40/per hour Pay Grade: N/A Contract Affiliation: N/A Status: Part-Time Classification: Non- Exempt Equal Opportunity Employer- Committed to Creating a Diverse and Inclusive Work Environment Cincinnati State Technical and Community College, as well as its individual academic divisions, is committed to a policy of equal opportunity in all its activities and programs, including employment and promotion. It does not discriminate on the basis of race, color, national, or ethnic origin, citizenship status, religion, sex, sexual-orientation, age, physical disabilities, veteran or marital status.

Part Time Instructor: CNC Programming and Machine Tool operation (WDC)

The College of Southern Nevada appreciates your interest in employment at our growing institution. We want your application process to go smoothly and quickly. We ask that you keep in mind the following when completing your application: <ul><li>Once you start the application process you cannot save your work. Please ensure you have all required attachment(s) available to complete your application before you begin the process.</li><li>Required attachments are listed below on the posting. Your application will not be considered without the required attachments.</li><li>Please note that applications must be submitted prior to the close of the recruitment. Once a recruitment has closed, applications will no longer be accepted.</li></ul>If you are unable to attach the required documents to your online application or need assistance regarding the application process, please contact the Talent Acquisition team within Human Resources via email at <a href="mailto:hr.recruitment@csn.edu" target="_blank">hr.recruitment@csn.edu</a> or call (702) 651-5800 to be directed to the appropriate Recruiter. Job Description DWED (Department of Workforce and Economic Development) and the Applied Technology Department at the College of Southern Nevada invite applications for a Part-Time Advanced Manufacturing - Machining Instructor within the Advanced Manufacturing Program beginning immediately. The successful candidate will demonstrate industry and teaching experience. Responsibilities The Advanced CNC Manufacturing Instructor will develop and instruct lab and lecture classes and develop student learning outcomes and course descriptions. This includes organizing instruction towards achieving student learning objectives; selecting textbooks and another curriculum; conferring with students; evaluating student mastery and providing a safe and positive classroom and laboratory environment. Primary teaching areas are in Advanced Manufacturing Technology topics such as: <ul><li>Metrology</li><li>Geometric Dimensioning and Tolerancing (GD&amp;T)</li><li>Machining</li><li>CNC Milling and Turning</li><li>CADD and Additive Manufacturing (Preferred)</li><li>Automation with PLCs and Robotics (Preferred)</li><li>Related engineering technology and technical physics classes</li></ul>Other duties will include: Program assessment and curriculum development; student mentoring; assess student learning and progress, scholarship of teaching and learning; maintaining accurate student records, upholding professional and ethical standards, participate in professional development activities; outreach to the college, community, and profession; supervising student assistants and staff as necessary; collaborate with other instructors and staff and duties as assigned by the Director of Advanced Manufacturing. The candidate is expected to participate in student recruitment activities. The candidate will participate and assist the team to maintain and develop strong industry and community partnerships, within and outside of the program advisory committee. They will also commit to continuing their professional development as an educator through attendance at industry conferences and membership in professional associations. Minimum Qualifications <ul><li>Associate's degree in the following: Industrial or Mechanical Technology; Mechanical Engineering (Degrees in related fields are also acceptable) OR five (5) years of industrial experience in a machining environment AND</li><li>A minimum of 1 year of work experience in a machining environment using CNC Mill/Lathe Machines</li><li>Teaching experience in Career and Technical Education (Preferred)</li></ul>Preferred Qualifications In addition to the minimum requirements, the department encourages applicants with the following credentials to apply: <ul><li>Bachelor's degree in education, adult education, or a related field</li><li>Experience teaching IET programs, preferably in a CTE setting</li><li>Experience teaching ABE, including ESL, math, and reading</li><li>10 or more years of work experience in Manufacturing or Industrial Technologies</li><li>5 or more years of work experience in Machining</li><li>1 or more years of experience teaching in Career and Technical Education</li><li>Leadership/ Management Experience</li><li>Industrial certifications such as NIMS, NC3, etc.</li><li>Experience teaching online/hybrid classes, Canvas</li><li>Experience creating a college curriculum</li><li>Experience developing an industrial lab in a college setting, such as a Machining, Manufacturing, or Mechanical Technologies Lab</li><li>Experience working in diverse multicultural situations</li></ul>Starting Pay $40.00 per hour Exempt Yes Full-Time Equivalent 48.8% Required Attachment(s) To be considered for this position, please upload the following documents to your application: <ul><li>Resume</li><li>Cover Letter</li><li>Academic Transcripts</li><li>Contact information for three professional references</li></ul>Applicants should fully describe their qualifications and experience with specific reference to each of the minimum and preferred qualifications. The search committee will use this information during the initial review of application materials. NSHE - INTERNAL APPLICANTS PLEASE NOTE CSN employees or employees within the Nevada System of Higher Education (NSHE) MUST use the "Find Jobs" process within Workday to find and apply for jobs at CSN and other NSHE Institutions. Once you log into Workday, type "Find Jobs" in the search box which will navigate to the internal job posting site. Locate this specific job posting by typing the requisition number in the search box. If you complete an application outside of the internal application process and apply as an external candidate, your application will no longer be considered at the time of minimum qualification review. In order to prevent the disqualification of your application, you will need to reapply as an internal candidate before 11:59 pm the day prior to the position close date. For more details on this position, please visit our website: My Career at CSN CSN is an Equal Employment Opportunity/Affirmative Action institution. For more information, visit <a href="http://www.csn.edu/nondiscrimination" target="_blank">http://www.csn.edu/nondiscrimination</a>. Posting Close Date 06/30/2025 Note to Applicant Applicants should fully describe their qualifications and experience with specific reference to each of the minimum and preferred qualifications. The search committee will use this information during the initial review of application materials. All document(s) must be received by 11:59 p.m. the day prior to the closing date posted on the job announcement. This position may require that a criminal background check be conducted on the candidate(s) selected for hire. As part of the hiring process, applicants for positions in the Nevada System of Higher Education may be required to demonstrate the ability to perform job-related tasks. Schedules are subject to change based on organizational needs. CSN is responsive to serving the educational needs of a diverse and ever-changing community. CSN employs only U.S. citizens and aliens authorized to work in the U.S. CSN does not sponsor aliens applying for faculty, professional staff, or management positions (H-1B Visas) in the absence of exceptional circumstances as defined by the USCIS.

Part - Time Instructor, Advanced Manufacturing - CNC Machining - FY 2025

Salary: See Position Description Location : Alvin Community College - Main Campus Job Type: Part-time CE (Instructor) Job Number: FY2425-083 Department: Workforce &amp; Strategic Initiatives Division: Continuing Education &amp; Workforce Development Opening Date: 10/01/2024 Closing Date: 8/31/2025 11:59 PM Central Job Summary This is a Part-Time Instructor Pool in our Continuing Education Workforce Development (CEWD) department for available assignments during the academic year. Applications are considered throughout the academic year and reviewed based on departmental needs. Should a review of your application result in the intent to pursue your candidacy, you will be contacted by phone or email for an interview. APPLICATION STATUS Your application status will be updated throughout the review process. If your application is still in progress, your application has not been reviewed by the hiring department. TERMS OF EMPLOYMENT Requires flexible work schedule to meet program needs, which may include working days, evenings and/or weekends. May require travel to our main campus in Alvin and/or to various offsite locations, including local high schools in Alvin, Danbury, Manvel and Pearland and to Texas Department of Criminal Justice facilities in Richmond, Rosharon or Lake Jackson. Requires the provision of official transcripts, licenses and/or certifications within (30) days of hire. Applicants with academic credentials from non-U.S. accredited institutions are required to have their coursework evaluated in terms of U.S. "equivalency." All international credential evaluations must be conducted by one of the companies affiliated with the National Association of Credential Evaluation Services, Inc. (NACES®) in order to be considered for a faculty position. Applicants bear the responsibility of requesting, paying associated fees, and obtaining an original transcript evaluation for submission to the Office of Human Resources. Please refer to the NACES® website for further information (). Alvin Community College is an equal opportunity institution and does not discriminate against anyone on the basis of race, religion, color, sex, pregnancy, gender equity, sexual orientation, parental status, national origin, age, disability, family medical history or genetic information, political affiliation, military service or veteran's status. This is a security sensitive position and requires a criminal history and/or motor vehicle records check. Essential Duties This position is responsible for instruction of CNC &amp; machining courses and the safety &amp; success of the students enrolled in the program. The Instructor will teach a variety of classes based on both manual and CNC lathes, mills and other equipment used in manufacturing. In addition, the Instructor will assist with recruitment, program development and learning outcomes. <ul><li>Perform classroom and laboratory instruction on the safe uses of manual and CNC machining equipment to a diverse population of students at various times and locations</li><li>Assist in maintaining the safe operation of equipment in machine shop</li><li>Possess a commitment to student engagement, student success, and instructional excellence. </li><li>Attend meetings and trainings as needed to maintain any workforce credential that might be offered through specific machining classes. </li><li>Prepare and utilize a course syllabus and assessments for each course using guidelines established by the institution </li><li>Maintain current knowledge of effective teaching methodologies and utilizes a variety of instructional delivery methods, classroom media, and educational resources </li><li>Advise students in academic and employment matters through posted office hours and electronic communication</li><li>Assess students' performance through a range of measurement activities and keep them informed of their progress in a timely manner </li><li>Utilize technology to facilitate learning and to access data, maintain records, generate reports, and communicate with others </li><li>Demonstrate effective communication skills, both written and oral</li><li>Assist in the development, distribution and collection of assessments for courses and program objectives </li><li>Submit timely college reports and forms to the appropriate divisions and departments </li><li>Provide recommendations to the Director of Industrial Programs, Dean of CEWD, and appropriate college committees regarding curriculum, instruction and division operations </li><li>Adhere to Alvin Community College's policies and procedures</li><li>Attend institutional meetings as required </li><li>Other duties as assigned</li></ul> WORK ENVIRONMENT The incumbent typically works in a classroom environment and uses a computer, telephone and other office equipment as needed to perform duties. The noise level in the work environment is typical of that of a classroom. Incumbent may encounter frequent interruptions throughout the work day. PHYSICAL DEMANDS The employee is regularly required to sit, talk, or hear; frequently required to use repetitive hand motion, handle or feel, and to stand, walk, reach, bend or lift up to twenty (20) pounds. Minimum Qualifications <ul><li>High School Diploma or Equivalent</li><li>Minimum of 5 years work experience as a journeyman, or equivalent title, as a Machinist and CNC Operator. </li><li>Demonstrated basic computer proficiency using Microsoft Office Products (Word, Excel, and Outlook).</li><li>Demonstrate ability to learn and navigate student registry systems.</li><li>Must have the ability to communicate effectively with all levels of an organization, from entry level students to senior level management. </li><li>Must have the ability to establish and maintain an effective working relationship with students, their supervisor, and with industry partners. </li><li>Must have the ability to establish and maintain detailed classroom records and reports relating to course instruction. </li><li>Must have the ability to evaluate the effectiveness of their teaching.</li><li>ACC Instructor's will frequently perform autonomously and must be self-motivated. </li><li>Must be flexible with the ability to work days, nights, and/or weekends with the understanding that available hours will be based on the needs of the program not to exceed 19 hours per week</li><li>Must be flexible and understands a minimum number of hours is not guaranteed and that classes may be cancelled and/or rescheduled with minimal notice due to student need, student enrollment and/or program needs</li></ul>01 I acknowledge my application, resume and/or supplemental documents all match and provide the same and consistent information; ensuring that beginning and end dates are in the MM/YYYY format. <ul> <li>Yes</li> <li>No</li></ul>02 I acknowledge this position requires schedule flexibility with the ability to work days, nights, and/or weekends with the understanding that available hours will be based on the needs of the program not to exceed 19 hours per week. <ul> <li>Yes</li> <li>No</li></ul>03 Do you have a high school diploma or equivalent? <ul> <li>Yes</li> <li>No</li></ul>04 Do you have experience with the use of Learning Management Systems (LMS), such as Blackboard or Pearson? <ul> <li>Yes</li> <li>No</li></ul>05 I acknowledge I have uploaded a copy of ALL my transcripts for ALL degrees conferred. <ul> <li>Yes</li> <li>No</li></ul>06 Are you familiar with interactive teaching methods and instruction via the internet and face-to-face? <ul> <li>Yes</li> <li>No</li></ul>07 Do you have 5 years work experience as a journeyman, or equivalent title, as a Machinist and CNC Operator.? <ul> <li>Yes</li> <li>No</li></ul>08 Do you have working knowledge of Microsoft Office programs, as well as intermediate computer skills? <ul> <li>Yes</li> <li>No</li></ul>Required Question

CEWD Part-Time Instructor, CNC Machinist

MetalQuest in Hayden, Idaho is seeking CNC Operators for our weekend shift. Weekend team members earn a $4 per hour weekend adder! No CNC experience necessary-- we have an excellent training program! Why work at MetalQuest? <ul><li>Competitive Pay</li><li>Opportunity for Growth</li><li>Collaborative Team</li></ul>MetalQuest offers a competitive compensation package which includes health, dental, vision, retirement, and more. If you are someone who is looking to gain knowledge and experience in a new field, this position is for you! We have trained individuals from every experience level and a variety of employment backgrounds. <ul><li>Schedules:<ul><li>1st Shift: 3:00am-3:00pm, Friday-Sunday<ul><li>Must be able to train on weekdays for the first 4-6 weeks</li></ul></li><li>2nd Shift: 3:00pm-3:00am, Friday-Sunday <ul><li>+25% shift differential!</li><li>Must be able to train on weekdays for the first 4-6 weeks</li></ul></li></ul></li></ul>Apply online at <a href="http://www.metalquest.net" target="_blank">www.metalquest.net</a> or call Ashley for more information at 402-768-3810. Job Responsibilities (all will be trained): <ul><li>Ensure machines are running good parts at all times.</li><li>Use measuring devices.</li><li>Read blueprints.</li></ul>Interested? Apply today. We'd love to hear from you!

Weekend CNC Operator - Will Train

Find what drives you on a team with a more than 75-year history of discovery, determination, and innovation. As a global leader in high-tech filtration, separation, and purification, Pall Corporation thrives on helping our customers solve their toughest challenges. Our products serve diverse, global customer needs across a wide range of applications to advance health, safety and environmentally responsible technologies. For the exponentially curious, Pall is a place you can thrive and amplify your impact on the world. Pall is one of 10 Life Sciences companies of Danaher. Together, we accelerate the discovery, development and delivery of solutions that safeguard and improve human health. Learn about the Danaher Business System which makes everything possible. The weekend shift CNC Machinist II is a part-time role that is responsible for performing various types of machining set-up and operations to ensure the machine shop meets daily production and quality goals. This position is part of the Pall Aerospace Machine Shop and will be located onsite in New Port Richey, FL. The work schedule is Friday, Saturday and Sunday, 6:00 AM to 3:30 PM. This position requires access to export-controlled commodities, technical data, technology, software, and services. U.S. citizenship, U.S. legal permanent resident status, protected person status, or U.S. Government export authorization is required. Any offer of employment is contingent upon Pall obtaining the necessary employment visa and export authorization, including, if required, an export license from the applicable U.S. government agency. In this role, you will have the opportunity to: <ul><li>Set-up and operate CNC Mills and/or Lathes including the selection of tools, holding fixtures, and methods for producing machined parts, and change worn tooling. Read and interpret CNC programs to recognize and make changes to rectify excessive tool wear and minor program oversights. Change off-sets as necessary to maintain quality and deburr parts during the machine cycle.</li><li>Perform first piece and in-process inspection using precision measuring tools (gauges and automated CMMs) and blueprints. Read and understand all types of drawings required to machine parts such as castings, forgings, and detailed engineering sketches. Complete all necessary paperwork as required including scorecards, hazard recognitions, routers and data, Red Tags, etc.</li><li>Maintain an acceptable production rate based on pre-established standards and produce products that meet all quality and drawing requirements. Perform secondary operations (i.e., set-up and operation on simple machines or processes including drill press, stamping press, deburring, etc.). Identify new ways to machine parts to improve quality and productivity. Assist in training co-workers.</li></ul>The essential requirements of the job include: <ul><li>High School diploma or equivalent (i.e. GED) and three (3) years of CNC set-up experience or completion of a machining apprenticeship program.</li><li>Fluent in blueprint reading or successfully complete blueprint training onsite.</li><li>Work overtime as required. Frequent bending, lifting and standing for extended periods of time; frequent lifting up to 20 lbs. from floor to bench; occasional lifting to 35 lbs. Good eye and hand dexterity.</li></ul>Physical/Environment Requirements: <ul><li>Frequent lifting up to 35 pounds. Lift up to 50 pounds with assistance. Lifting frequency: Daily. Able to load parts using hand tools. Stand for long time periods (for a minimum of 9 hours or more); frequently twist and bend.</li><li>Pass basic eye test. Good eye and hand dexterity.</li><li>Be able to work with solvents, oils, and other chemicals.</li></ul>It would be a plus if you also possess previous experience in: <ul><li>Knowledge of at least 3 axis machining and above</li><li>CNC Machining in aerospace manufacturing</li><li>Quality measures, AQL levels and inspection methods.</li></ul>Pall Corporation, a Danaher company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it's a health care program or paid time off, our programs contribute to life beyond the job. Check out our benefits at danaherbenefitsinfo.com. At Danaher we bring together science, technology and operational capabilities to accelerate the real-life impact of tomorrow's science and technology. We partner with customers across the globe to help them solve their most complex challenges, architecting solutions that bring the power of science to life. Our global teams are pioneering what's next across Life Sciences, Diagnostics, Biotechnology and beyond. For more information, visit <a href="http://www.danaher.com" target="_blank">www.danaher.com</a>. Danaher Corporation and all Danaher Companies are committed to equal opportunity regardless of race, color, national origin, religion, sex, age, marital status, disability, veteran status, sexual orientation, gender identity, or other characteristics protected by law. We value diversity and the existence of similarities and differences, both visible and not, found in our workforce, workplace and throughout the markets we serve. Our associates, customers and shareholders contribute unique and different perspectives as a result of these diverse attributes. The EEO posters are available here. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us at <a href="mailto:applyassistance@danaher.com" target="_blank">applyassistance@danaher.com</a> to request accommodation.

CNC Machinist II (weekend, part-time)

Join our team! What We Offer At Palm Beach State College, you will discover a place where ideas come to life and the heartbeat of a county begins. By joining us, you will be exposed to professionals from across the U.S. and abroad who are the strivers, reinventors, explorers, and influencers dedicated to developing talent that fills the most needed workforce roles. As the Panthers, we embrace a community of belonging, caring, and connection for our students and employees. We seek creative individuals to help PBSC fulfill its mission of inspiring hope, advancing skills, and transforming lives. About this role Instruct college students in accordance with educational theories and techniques. Develops discipline related curricula, assess student learning, participates in program evaluation, and college activities. Maintains college and department standards in support of the College's mission and strategic plan. Work schedule varies according to teaching assignment. Varies Instruct diagnosed high functioning with minimal support autistic college students in accordance with educational theories and techniques. Develops discipline related curricula, assess student learning, participates in program evaluation, and college activities. Maintains college and department standards in support of the College's mission and strategic plan. PLEASE NOTE: This is an open continuous applicant pool. Submitting an application does not guarantee an interview or employment. Positions will be filled by the department on an as needed basis. Applications without attached copies of official transcripts or non-web based unofficial transcripts will not be considered. Transcripts for Adjunct positions must either be an official copy or a college-stamped student copy or a non-web based unofficial transcript, scanned into an electronic format and attached to their application. Transcripts produced through web-based student systems will not be accepted. Minimum Requirements Associate degree or higher in CNC/machining technology or related discipline and related industry experience OR NIMS: Level 1 Lathe and Mill certified, Mastercam Associate level certification and minimum two years of verifiable experience working in CNC machining as an operator or set-up programmer capacity OR Two or more years of related industry experience and teaching/training experience. Preferred Experience training with diagnosed high functioning with minimal support autistic college students. READY TO APPLY? Here's your application preparation! Please review the following information to apply for a position at Palm Beach State College: <ul><li>Carefully review the minimum qualifications advertised for the available position, as only applicants meeting the minimum requirements will be considered.</li><li>Background Check/ Drug Screen may be required based on the specific requirements of the position for which the application is being submitted. Employment is contingent upon passing a drug test and completing a criminal background investigation.</li><li>An essential goal of the Office of Human Resources is to respond to all applicants once a selection is made. Please take notice of the position closing date advertised. Whenever positions are filled, the Office of Human Resources responds to all applicants who have submitted applications.</li><li>The College conducts its employment activity within the State of Florida except for occasional brief and temporary pre-approved periods related to college travel.</li></ul>Application Deadline This position is open until filled

Adjunct Instructor, CNC Production Specialist - (H)

Job Description Summary Broward College places special importance on helping under - prepared students achieve academic success. Candidates should demonstrate (1) a mastery of their specific discipline; (2) a deep commitment to the college mission of fostering student success, achievement and persistence; (3) technology competencies as well as teaching/counseling skills and strategies that facilitate 21st century literacies; (4) the use of resources that prepare students for productive lives; (5) experience using various educational technological mediums. Broward College is proud to announce the new Uniquely Abled Academy (UAA) and is currently seeking instructors in the advanced manufacturing sector. This position provides customized training and instruction for future manufacturing employees. Knowledge and experience in manual and Computer Numerical Control (CNC) Milling &amp; Tooling Machining and instructing adult learners. An ideal candidate will have knowledge and training experience in subject areas such as: • Blueprint Reading • Geometric Dimensioning &amp; Tolerancing (GD&amp;T) • Inspection and Measurement • Metrology and Metallurgy for the Machine Trades • Manual Machining Experience • Computer Numerical Control (CNC) Machine Operation and Programming • Lean Manufacturing • Industry experience in automotive, aerospace, medical device, or other manufacturing areas Minimum Education: Master's Degree in Biomedical Engineering, Computer Engineering Technology, Computer-Integrated Manufacturing, Electrical Engineering, Electrical Engineering Technology, Electronics Engineering, Engineering Technology: Drafting, Industrial Engineering, Mechanical Engineering, Engineering Technology, or related subfield Or Master's Degree and 18 graduate credit hours in Biomedical Engineering, Computer Engineering Technology, Computer-Integrated Manufacturing, Electrical Engineering, Electrical Engineering Technology, Electronics Engineering, Engineering Technology: Drafting, Industrial Engineering, Mechanical Engineering, Engineering Technology, or related subfield Or Bachelor's Degree in Biomedical Engineering, Computer Engineering Technology, Computer-Integrated Manufacturing, Electrical Engineering, Electronics Engineering, Electrical Engineering Technology, Engineering Technology: Drafting, Industrial Engineering, Mechanical Engineering, Engineering Technology, or related subfield AND appropriate industry certification or licensure AND 3 years' work experience in Engineering Field Ph.D. preferred. Position Time Type Part time Position Number P0090421 Department IMCT Engineering Technology Salary Range $2,061 - $2,266.02 (Salary commensurate Posting End Date 1 Work Schedule Monday-Friday/weekend/varies Comments To be considered for this position, a completed online employment application form along with a resume and unofficial transcript are required. Designated Essential Personnel No Special Instructions to Applicant: For positions requiring a degree, official transcripts are required upon hire. An unofficial copy of the degree/transcript is acceptable during the application process and must be attached to the online application. If unable to attach the documentation, please email the document to <a href="mailto:jobs@broward.edu" target="_blank">jobs@broward.edu</a> or fax to 954-201-7612, stating clearly the position name(s) and position number(s) the transcript is to be attached to. Foreign Transcript: Transcripts issued outside of the United States require an equivalency statement from a certified transcript evaluation service verifying the degree equivalency to that of an accredited institution within the USA. This report must be attached with the application and submitted by the application deadline. All required documentation must be received on or before the job posting end date. **Please note that multiple documents can be uploaded in the "Resume/CV/Transcript/License/Certification" section of the application** Please refer to the link with the instructions on how to submit an application with multiple documents. <a href="https://www.broward.edu/jobs/_docs/tutorial_external_applicant_broward_college.pdf" target="_blank">https://www.broward.edu/jobs/_docs/tutorial_external_applicant_broward_…</a>. Employment is contingent upon the successful completion of the required background screening process. Broward College uses E-Verify to check employee eligibility to work in the United States. You will be required to complete an I-9 Form and provide documentation of your identity for employment purposes Diversity and Inclusion are a priority at Broward College Broward College is an equal opportunity employer and strongly encourages applications from eligible veterans and spouses of veterans, underrepresented groups, including minorities, women, and persons with disabilities. The College does not discriminate on the basis of age, color, disability, gender identity, genetic information, national origin, race, religion, sexual orientation or any other legally protected classification. For inquiries regarding Title IX and the college's non-discrimination policies, contact the Vice President, Talent and Culture at 954-201-7449, Broward College, 6400 NW 6th Way, Fort Lauderdale, FL 33309. Applicants needing a reasonable accommodation with the application process, please contact the Talent and Culture Department at <a href="mailto:nanders1@broward.edu" target="_blank">nanders1@broward.edu</a> Disclaimer The intent of this description is to illustrate the types of duties and responsibilities that will be required of positions given this title and should not be interpreted of describe all the specific duties and responsibilities that may be required in any particular position. Directly related education/experience beyond the minimum stated may be substituted where appropriate at the discretion of the Appointing Authority. Broward College reserves the right to revise or change job duties, job hours, and responsibilities.

Adjunct Instructor - Engineering Technology - Computer Numerical Control (CNC) (Pooled Position)

It's great to work at a place where people are truly committed to serving our students! We're committed to bringing passion and energy to our College. Join Our Team of Industrial Skills Instructors at Bucks County Community College Bucks County Community College is seeking qualified individuals to join our team of talented industrial skills instructors to teach during daytime hours. Our programs are growing, and we are seeking individuals for a variety of programs ranging from machining to welding. These are part-time, contract-based positions with a flexible schedule. Instructors will be responsible for instructing adult participants in training programs and should ideally have a broad array of experience and skills related to machining, including experience with machines (lathes, drill presses, band saws, milling, CNC, etc.), blueprint reading, shop math, measurement, and safety. Primary Job Duties: <ul><li>Instruct, develop lesson plans, maintain student attendance, provide assessments, and paperwork associated with the course. Identify supplies/materials/equipment required for class and maintain equipment. Mentor as needed.</li><li>Course structure - daytime career training classes are conducted Monday-Thursday and some Fridays for approximately 12 weeks. The program runs in continuous 12-week cycles, with each cohort consisting of both theory and hands-on practice in a lab/shop setting.</li><li>Programs are held in the new state-of-the-art Center for Advanced Technologies in Bristol, PA, a 28,000 square foot building with flexible space to meet the workforce needs of our community.</li></ul>Minimum Qualifications: <ul><li>High school diploma and 5 years of experience or an associate's degree</li><li>Over 10 years in industrial/manufacturing setting</li><li>Must be able to mentor learners in soft skills such as teamwork, professional work behaviors, and professional communication skills.</li><li>Work well in a team environment.</li><li>Experience in one or more of the following: Machining/metalwork, blueprint reading, welding.</li><li>Knowledge of MS Office for email and recordkeeping</li><li>Familiarity with facilities maintenance a plus.</li></ul>Preferred Qualification: <ul><li>Adult teaching experience preferred.</li></ul>We are proud to be an organization that embraces the value of bringing diverse, talented, and committed people together. The fastest way to breakthrough innovation is when diverse ideas come together in an inclusive environment. We encourage our colleagues to respectfully challenge one another's thinking and approach problems collectively. We are an equal opportunity employer, committed to fostering an inclusive and diverse workplace. Please Note: At this time, the College does not provide work visa sponsorships. To be considered for employment at Bucks County Community College, applicants must be permitted to legally work in the United States without employer sponsorship. Bucks County Community College participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.

Metalwork/Machining Instructor

Find what drives you on a team with a more than 75-year history of discovery, determination, and innovation. As a global leader in high-tech filtration, separation, and purification, Pall Corporation thrives on helping our customers solve their toughest challenges. Our products serve diverse, global customer needs across a wide range of applications to advance health, safety and environmentally responsible technologies. For the exponentially curious, Pall is a place you can thrive and amplify your impact on the world. Pall is one of 10 Life Sciences companies of Danaher. Together, we accelerate the discovery, development and delivery of solutions that safeguard and improve human health. Learn about the Danaher Business System which makes everything possible. The weekend shift CNC Machinist II is a part-time role that is responsible for performing various types of machining set-up and operations to ensure the machine shop meets daily production and quality goals. This position is part of the Pall Aerospace Machine Shop and will be located onsite in New Port Richey, FL. The work schedule is Friday, Saturday and Sunday, 6:00 AM to 3:30 PM. This position requires access to export-controlled commodities, technical data, technology, software, and services. U.S. citizenship, U.S. legal permanent resident status, protected person status, or U.S. Government export authorization is required. Any offer of employment is contingent upon Pall obtaining the necessary employment visa and export authorization, including, if required, an export license from the applicable U.S. government agency. In this role, you will have the opportunity to: <ul><li>Set-up and operate CNC Mills and/or Lathes including the selection of tools, holding fixtures, and methods for producing machined parts, and change worn tooling. Read and interpret CNC programs to recognize and make changes to rectify excessive tool wear and minor program oversights. Change off-sets as necessary to maintain quality and deburr parts during the machine cycle.</li><li>Perform first piece and in-process inspection using precision measuring tools (gauges and automated CMMs) and blueprints. Read and understand all types of drawings required to machine parts such as castings, forgings, and detailed engineering sketches. Complete all necessary paperwork as required including scorecards, hazard recognitions, routers and data, Red Tags, etc.</li><li>Maintain an acceptable production rate based on pre-established standards and produce products that meet all quality and drawing requirements. Perform secondary operations (i.e., set-up and operation on simple machines or processes including drill press, stamping press, deburring, etc.). Identify new ways to machine parts to improve quality and productivity. Assist in training co-workers.</li></ul>The essential requirements of the job include: <ul><li>High School diploma or equivalent (i.e. GED) and three (3) years of CNC set-up experience or completion of a machining apprenticeship program.</li><li>Fluent in blueprint reading or successfully complete blueprint training onsite.</li><li>Work overtime as required. Frequent bending, lifting and standing for extended periods of time; frequent lifting up to 20 lbs. from floor to bench; occasional lifting to 35 lbs. Good eye and hand dexterity.</li></ul>Physical/Environment Requirements: <ul><li>Frequent lifting up to 35 pounds. Lift up to 50 pounds with assistance. Lifting frequency: Daily. Able to load parts using hand tools. Stand for long time periods (for a minimum of 9 hours or more); frequently twist and bend.</li><li>Pass basic eye test. Good eye and hand dexterity.</li><li>Be able to work with solvents, oils, and other chemicals.</li></ul>It would be a plus if you also possess previous experience in: <ul><li>Knowledge of at least 3 axis machining and above</li><li>CNC Machining in aerospace manufacturing</li><li>Quality measures, AQL levels and inspection methods.</li></ul>Pall Corporation, a Danaher company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it's a health care program or paid time off, our programs contribute to life beyond the job. Check out our benefits at danaherbenefitsinfo.com. Join our winning team today. Together, we'll accelerate the real-life impact of tomorrow's science and technology. We partner with customers across the globe to help them solve their most complex challenges, architecting solutions that bring the power of science to life. For more information, visit <a href="http://www.danaher.com" target="_blank">www.danaher.com</a>. Danaher Corporation and all Danaher Companies are committed to equal opportunity regardless of race, color, national origin, religion, sex, age, marital status, disability, veteran status, sexual orientation, gender identity, or other characteristics protected by law. We value diversity and the existence of similarities and differences, both visible and not, found in our workforce, workplace and throughout the markets we serve. Our associates, customers and shareholders contribute unique and different perspectives as a result of these diverse attributes. The EEO posters are available here. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us at <a href="mailto:applyassistance@danaher.com" target="_blank">applyassistance@danaher.com</a> to request accommodation.

CNC Machinist II (weekends, part-time)

Position Details Position Information Position Title CNC Machining Trainer Part-Time, Flexible Job Category Job Type (Part-Time) Adjunct Faculty Supervisor's Title Dean of Manufacturing &amp; Skilled Trades Location Blong Technology Center, Davenport Job Description EICC is seeking part-time CNC Machining Trainers to teach skills to the future workforce. Work schedule may be daytime and/or evenings depending on applicant's availability and can be flexible. Instruction may be done on-site at the respective business or an EICC campus. Contact us to see how your skills could assist the future workforce. Email: <a href="mailto:msmapes@eicc.edu" target="_blank">msmapes@eicc.edu</a> or 563-336-3348 Required Qualifications Qualifications include: Minimally 2 years of experience in CNC machining Previous teaching experience preferred but not necessary Preferred Qualifications Physical Demands <ul><li>May have prolonged periods standing.</li><li>Must also be able to access and navigate indsutry work space for training and showing simulations.</li><li>Lifting light to medium weight objects, must be able to lift up to 40 pounds at times.</li></ul>Salary $47.25/hr Typical Duties and Responsibilities Hands-on teaching fabrication, machining, CNC Machining to students. EICC Non-Discrimination Statement Posting Detail Information Posting Number F068P Number of Vacancies 5 Open Date 07/30/2024 Close Date Open Until Filled Yes Special Instructions Summary

13 Part Time Jobs