field_remote_option

field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

field_job_salary_range

The CNC Machinist II is part of our Subsea Division located in Spring, Texas. A CNC Machinist II is responsible for operating CNC machines according to Hunting procedures and engineering blueprints. This machinist has no direct supervision over employees but should be able to supervise training, preventative maintenance and daily production efforts. Overtime is required in this position. Responsibilities This position is primarily responsible to: <ul><li>Operate all equipment, CNC, or manual Lathes to produce quality parts.</li><li>Make any machine setup or tooling change over.</li><li>Complete knowledge and understanding of all inspection and gauging tools, ability to complete informational and in process inspections.</li><li>Assist in tooling design for future jobs.</li><li>Trouble shoot machines and CNC programs for problems and inefficiencies</li><li>General maintenance on equipment.</li><li>Inventory control of machining consumables.</li><li>Material handling</li><li>Operation of cranes and forklifts</li></ul> Required Skills and Experience: <ul><li>High school diploma or equivalent.</li><li>Strong mathematical background or machine trade school is required; 3 years in a machine shop environment</li><li>5-10 years experience in machining of CNC and Manual machines</li><li>Experience in an Engineer-to-Order or Make-to-Order shop environment. </li><li>Ability to read and interpret critical dimensions on engineering blueprints.</li><li>Experience with using the Machinist Handbook</li><li>Training on safety, drawings, shop routers or work instructions as needed.</li><li>Experience using statistical process controls</li><li>Commitment to high quality standards and continuous improvements.</li><li>Organized, ability to multi-task, and work flexible hours</li><li>Fanuc control knowledge required.</li><li>Experience with long bed lathe preferred.</li></ul> Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. <ul><li>Ability to stand for long periods of time.</li><li>Must be able to frequently lift up to 50 pounds.</li></ul> Work Environment/Conditions The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. <ul><li>This schedule includes weekend shifts. </li><li>The ability to work planned and unplanned overtime. </li><li>On-Site presence is required.</li></ul> Candidates are required to be authorized to work in the United States. All employees must be able to comply with the company Drug and Alcohol Policy, which includes participation in Company random drug testing. Employment is subject to background checks appropriate to the position.

CNC Machinist II

Collaboration drives Nordson's success as a market leader in Industrial Precision Solutions and Advanced Technology. Our employees thrive in an environment where we help each other reach our personal best and enable our company to continuously improve and grow, and our customers to succeed. You will find Nordson employees sharing our success by giving back in the communities around the world where we live and work. Job Summary Perform engineering duties in planning and designing tools, machines, and other mechanically functioning equipment. Oversee installation, operation, maintenance, and repair of such equipment. Create and revise processes and process controls as well as quality and quality instrumentation. Essential Job Duties and Responsibilities <ul><li>Read and interpret blueprints, technical drawings, schematics, and computer-generated reports. Fluent in GD&amp;T.</li><li>Confer with engineers and other personnel to implement operating procedures, resolve system malfunctions, and provide technical information.</li><li>Research and analyze customer design proposals, specifications, manuals, and other data to evaluate the feasibility, cost, and maintenance requirements of designs or applications.</li><li>Specify system components or direct modification of products to ensure conformance with engineering design and performance specifications.</li><li>Research, design, evaluate, install, operate, and maintain mechanical products, equipment, systems and processes to meet requirements, applying knowledge of engineering principles.</li><li>Experience with Capital Equipment specification &amp; purchasing a plus.</li><li>Primary author of CNC programs, launch and modify CNC programs as needed. Assist / approve modifications to existing CNC programs.</li><li>Investigate equipment failures and difficulties to diagnose faulty operation, and to make recommendations to maintenance crew.</li><li>Use of drafting tools or computer-assisted design (CAD) or drafting equipment and software.</li><li>Oversee installation, operation, maintenance, and repair to ensure that machines and equipment are installed and functioning according to specifications.</li><li>Conduct research that tests and analyzes the feasibility, design, operation and performance of equipment, components and systems.</li><li>Recommend design modifications to eliminate machine or system malfunctions.</li><li>Develop and test models of alternate designs and processing methods to assess feasibility, operating condition effects, possible new applications and necessity of modification.</li><li>Recommend Corrective action using quality tools such as 5W 2H ,5P SA or other as deemed necessary For items with a negative gap</li></ul>Education and Experience Requirements <ul><li>Bachelor's Degree (four year college or technical school)</li><li>5+ years in a Machining center or in machining production</li><li>Experience, maintain, set up and operation of mills, lathes, Bridgeport's, and various CNC</li><li>Microsoft Office</li><li>Auto CAD</li><li>Solid Works - Preferred</li><li>ProE - Preferred</li><li>CATIA</li><li>ESPRIT CAM</li><li>GD&amp;T</li></ul>Preferred Skills and Abilities <ul><li>Statistical techniques as applied to assembly/manufacturing</li><li>Root Cause investigation</li><li>Lean and 6 sigma tools</li><li>Hands on mechanical skills a plus</li><li>Good communication skills</li><li>Good organizational skills to manage multiple priorities at one time</li></ul>Working Conditions and Physical Demands To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Travel Required Minimal Nordson Corporation provides equal employment opportunity to all applicants and employees. No person is to be discriminated against in any aspect of the employment relationship due to race, religion, color, sex, age, national origin, ancestry, disability, sexual orientation, gender identity, genetic information, citizenship status, marital status, pregnancy, veteran status or any other status protected by applicable federal, state, or local law. All employment offers are contingent upon successful completion of our pre-employment drug screening and background/criminal check, consistent with applicable laws.Third party recruiters and agencies should not contact employees of Nordson or its subsidiaries directly. Any resumes sent to a hiring manager or submitted to Nordson employees are considered unsolicited and property of Nordson. Nordson will not pay a placement fee unless the agency or recruiter has a signed contract with Nordson's Human Resources department in advance of submitting a candidate for consideration. Verbal and written approvals will not be considered a valid contract for service.

Machining Engineer

At Konecranes, we believe that great customer experience is built on the people behind the Konecranes name. Everything we do, we do with passion and drive. We believe diversity drives business success and is the foundation for our growth. We welcome different backgrounds and skills that enrich our community and we promote a place where we can ALL be ourselves. This is what makes Konecranes a unique place to work. Position Title: CNC Machinist Reports To: Production Supervisor Operate one of several machines, including but not limited to CNC lathes, or CNC machining centers for production of products including shafts, wheels, pinions/gears, drums, sheaves, and related machined crane components. What we offer: Benefits: Medical Plan, Dental, Vision, 401k plan with a match from day one, profit sharing, identity theft protection, accident insurance, travel insurance and so much more! Vacation: 2 weeks of vacation per year (pro-rated for the first year depending on start date). 5-12 years of service, 3 weeks. 13+ years of service, 4 weeks. Sick Leave: 5 days of Sick Leave per year. Pro-rated the first year after 90 days of service Holidays: 10 paid holidays per year Principal Responsibilities: <ul> <li>CNC lathe, or CNC machining centers to make required machining operations</li> <li>Ability to read and interpret part drawings to ensure proper dimensions of machined specifications</li> <li>Notes, reports, and corrects variations in routing sequence</li> <li>Keeps supervisors aware of pertinent issues, information, etc. warranting supervisors knowledge, action and/or resolution.</li> <li>Ensures proper, accurate records, files, databases, etc. are maintained, as required, within areas of responsibility.</li> <li>Maintain tooling.</li> <li>Ensure proper inspection, i.e. first piece inspection(s) are performed and makes adjustments as required.</li> <li>Perform functions in a timely, safe, and cost-effective manner.</li> <li>Ensure work area is kept clean and safe.</li> <li>Perform preventative maintenance.</li> <li>Maintains a flexible, cooperative, team oriented, and customer focused attitude.</li> <li>Other duties may be assigned.</li> <li>Setup capabilities is a plus.</li></ul>Education: High school diploma or equivalent. Experience: General knowledge of tooling applications and shop practices. Possess general machinist tools and related equipment. General computer knowledge: Outlook, browsing, and basic data entry. Other Requirements: Able to work within tolerance requirements and perform visual inspection. Able to use required hand tools, precision measuring instruments, etc. Able to work from detailed drawings, blueprints, prints, work orders, etc.While performing the duties of this job, the employee is regularly required to stand, walk, talk, hear, and use hands to finger, handle, or feel. The employee is required to reach with hands and arms. The employee must regularly lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, and ability to adjust focus. *KCN Konecranes, Inc. and its affiliates will not accept resumes from external recruiters or agencies without a Service Agreement and Agency Portal submission. Any resumes sent without a Service Agreement and Agency Portal submission with Konecranes, Inc. are void of any fees and free for internal use. Applicable Konecranes data protection obligations are the responsibility of the agency. Konecranes is a global leader in material handling solutions, serving a broad range of customers across multiple industries. We consistently set the industry benchmark, from everyday improvements to the breakthroughs at moments that matter most, because we know we can always find a safer, more productive and sustainable way. That's why, with 16 000+ professionals in over 50 countries, we are trusted every day to lift, handle and move what the world needs. Konecranes is committed to ensuring that all employees and job applicants are treated fairly in an environment which is free from any form of discrimination. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled/Other Protected Category.

CNC Machinist - 2nd Shift - Watertown, WI

Bettcher Industries is a leading developer and manufacturer of innovative precision cutting and trimming tools for food processing and industrial applications. We also manufacture equipment for the restaurant, fast food and institutional foodservice. Our mission is to "Globally collaborate to provide inventive solutions which enhance processing methods, increase yield, and improve efficiency to benefit our customers". We have an excellent benefits package, air-conditioned plant, 12 paid holidays a year including a holiday shutdown at the end of the year, vacation, 401K matching program, tuition reimbursement, amongst many other "perks" of working at Bettcher Industries. Position Summary: The Machinist II is qualified to run the machine on their own with minimal assistance. The operator will make minor adjustments &amp;/or tool offsets and will work with a more senior Machinist for any major adjustments. Essential Functions: <ul><li>Observes operation of machine(s) and verifies conformance of workpiece to specifications and dimensional tolerances as well as visually inspects parts for non-conformance.</li><li>Reads and interprets work instructions for product specifications, dimensions, tolerances, and tooling instructions.</li><li>Follows standard operating production procedures and work instructions. Performs work in a systematic manner to ensure all steps are carried out in proper sequence.</li><li>Reads and interprets measuring devices to ensure quality standards are met. If the operation is causing quality issues the machinist may troubleshoot the issue or stop production and consult with a senior CNC Machinist, Quality, or Supervisor.</li><li>Submits engineering change requests to supervisor for evaluation.</li></ul><ul><li>Interprets CMM report and makes necessary offsets.</li><li>Maintains production on multiple machines.</li><li>Properly sets any required offsets for the part to be machined after a basic tool setting process has been completed.</li><li>Interprets CNC program: units of measure, positioning system, tools, spindle speeds, feed rates, canned cycles, coolant use, axis destination movements, tool movements, and end-of-program code.</li><li>Performs preventative maintenance checks on machine. This includes checking all fluid levels, system pressure, tooling wear, component lubrication and cleaning.</li><li>Accurately report production results (labor time, part counts and status) in production system.</li><li>Properly report scrap and move to reject hold area or QC reject area.</li><li>Responsible for all housekeeping. Perform major cleanup as required.</li><li>Follows and completes daily work assignments as directed.</li><li>Perform all tasks in a safe and responsible manner. Adheres to all safety policies and procedures.</li><li>Responsible for meeting production requirements based on established labor standards.</li><li>Other duties as assigned.</li></ul>Knowledge/Skills: <ul><li>Basic math skills including: </li><li><ul><li>adding, subtracting, multiplying, and dividing whole numbers and decimals</li><li>ability to convert fractions into decimals and vice versa</li><li>ability to calculate percentages</li></ul></li><li>Basic computer skills including typing and ability to enter data into Bettcher workstations.</li><li>Verify the setup of and operation of gages and other measuring equipment.</li><li>Ability to demonstrate proper usage of gages (i.e., caliper, micrometer, and depth gage).</li><li>Ability to read and interpret blueprints and/or technical drawings including GD&amp;T and apply the information as it relates to gaging, dimensioning, and tolerancing.</li></ul>Education and Experience: <ul><li>High School Diploma or GED required</li><li>Preferred 3 years of experience in manufacturing machining / vocational schooling </li><li>Must be able to troubleshoot equipment &amp; identify tooling issues such as worn tooling and tool holders.</li><li>Must meet all the qualification standards requirements of previous level.</li></ul>Physical Requirements: <ul><li>Light physical effort equal to frequent lifting or moving of lightweight materials. </li><li>Regularly required to sit or stand, bend and reach and walk in order to operate multiple machines simultaneously. </li><li>May occasionally lift up to 25 pounds.</li></ul>

CNC Machinist II - First Shift

Job Details Level Experienced Job Location One Source Manufacturing Headquarters - Leander, TX Position Type Full Time Job Shift Night Job Category Manufacturing Description PLEASE NOTE THAT THIS IS A NIGHT SHIFT POSITION. NIGHT SHIFT IS MON-THURS 3PM-1:30AM <ul><li>Medical, dental, and vision insurance for you and your family is 100% paid for by the company.</li><li>401k match up to 3%</li><li>Voluntary Life for Employee, Spouse, and Children</li><li>Short Term Disability</li><li>2 weeks of PTO in first year</li><li>8.5 paid holidays</li><li>15% differential</li></ul> Principal Duties and Responsibilities*: The CNC Machinist operates computer numerical control machines to fabricate parts. He/ She will work with Engineering or programming to determine a sequence of operations on prototype parts using best known methods of manufacture. He/ She has the authority to make program edits when proving out the CNC code on prototype parts. He/ She loads parts in the machine, cycles machine and detects malfunctions in machine operations, such as worn or damaged cutting tools. The position performs set ups and runs prototype and production lots, communicates with co-workers regarding productions runs, and maintains a safe, organized and clean work environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions: <ul><li>Performs all assigned machine shop operations.</li><li>Documents information used for set ups, provides recommendations for tool life management.</li><li>Detects and reports defective materials or questionable conditions to management or designee.</li><li>Maintains the work area and equipment in a clean, orderly condition and follows prescribed safety procedures, 5S practices and daily maintenance logs.</li><li>Regularly performs milling, turning, drilling, tapping, de-burring, sawing and sanding tasks.</li><li>Performs inspection of machined products, and documents results in accordance with prescribed inspection methods listed on I.P.I (In Process Inspection).</li><li>Processes work orders through ERP system.</li><li>Completes NCMRs to identify non-conforming product or material.</li><li>Monitors required training on a weekly basis.</li><li>Trains and mentors CNC Operator 1 and CNC Operator 2 employees on good machining practices.</li></ul> Work Environment: While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and vibration. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The position requires frequent lifting, pushing and pulling objects that are up to 50 pounds. Knowledge/Skills: <ul><li>Communication Proficiency</li><li>Mathematical Skills.</li><li>Mechanical Capacity.</li><li>Technical Capacity.</li><li>Time Management.</li><li>Blueprint reading.</li></ul> Education/Experience: <ul><li>High school diploma/GED</li><li>Completion of a craft apprenticeship or applicable trade school.</li><li>Successful demonstration of CNC Operator Level 2 duties.</li><li>3-5 years of experience in a manufacturing environment is preferred.</li></ul> * Note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

CNC Machinist-Night Shift

Job Details Level Experienced Job Location One Source Manufacturing Headquarters - Leander, TX Job Shift Day Description Benefits include: <ul><li>Medical 100% paid by employer for employee and family</li><li>Dental 100% paid by employer for employee and family</li><li>Vision 100% paid by employer for employee and family</li><li>Voluntary Life for Employee, Spouse, and Child</li><li>Short Term Disability</li><li>401k match up to 3%</li><li>2 weeks of PTO in first year</li><li>1/2 day for Birthday</li><li>10 paid holidays</li><li>Veteran's receive Veteran's day off</li></ul> .Principal Duties and Responsibilities*: The CNC Machinist operates computer numerical control machines to fabricate parts. He/ She will work with Engineering or programming to determine a sequence of operations on prototype parts using best known methods of manufacture. He/ She has the authority to make program edits when proving out the CNC code on prototype parts. He/ She loads parts in the machine, cycles machine and detects malfunctions in machine operations, such as worn or damaged cutting tools. The position performs set ups and runs prototype and production lots, communicates with co-workers regarding productions runs, and maintains a safe, organized and clean work environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions: • Performs all assigned machine shop operations. • Documents information used for set ups, provides recommendations for tool life management. • Detects and reports defective materials or questionable conditions to management or designee. • Maintains the work area and equipment in a clean, orderly condition and follows prescribed safety procedures, 5S practices and daily maintenance logs. • Regularly performs milling, turning, drilling, tapping, de-burring, sawing and sanding tasks. • Performs inspection of machined products, and documents results in accordance with prescribed inspection methods listed on I.P.I (In Process Inspection). • Processes work orders through ERP system. • Completes NCMRs to identify non-conforming product or material. • Monitors required training on a weekly basis. • Trains and mentors CNC Operator 1 and CNC Operator 2 employees on good machining practices. Work Environment: While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and vibration. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The position requires frequent lifting, pushing and pulling objects that are up to 50 pounds Qualifications Knowledge/Skills: • Communication Proficiency • Mathematical Skills. • Mechanical Capacity. • Technical Capacity. • Time Management. • Blueprint reading. Education/Experience: • High school diploma/GED • Completion of a craft apprenticeship or applicable trade school. • Successful demonstration of CNC Operator Level 2 duties. • 3-5 years of experience in a manufacturing environment is preferred. * Note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. International Trade in Arms Regulations (ITAR): <ul><li>Must be either; US Citizen, lawful permanent resident of the US, or protected individual as defined by 8 U.S.C. 1324b(a)(3).</li></ul>

CNC Machinist-Day Shift

Job Details Level Experienced Job Location One Source Manufacturing Headquarters - Leander, TX Position Type Full Time Travel Percentage None Job Category Manufacturing Description <ul><li>Medical, dental, and vision insurance for you and your family is 100% paid for by the company.</li><li>401k match up to 3%</li><li>Voluntary Life for Employee, Spouse, and Children</li><li>Short Term Disability</li><li>2 weeks of PTO in first year</li><li>8.5 paid holidays</li><li>15% differential</li></ul> Principal Duties and Responsibilities*: The CNC Operator Level 2 operates computer numerical control machines to fabricate parts. He/ She will load parts in the machine, cycles machine and detects malfunctions in machine operations, such as worn or damaged cutting tools. The position performs set ups and runs production lots, communicates with co-workers regarding productions runs, and maintains a safe, organized and clean work environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions: <ul><li>Performs all assigned machine shop operations.</li><li>Detects and reports defective materials or questionable conditions to management or designee.</li><li>Maintains the work area and equipment in a clean, orderly condition and follows prescribed safety procedures, 5S practices and daily maintenance logs.</li><li>Regularly performs milling, turning, drilling, tapping, de-burring, sawing and sanding tasks.</li><li>Performs inspection of machined products, and documents results in accordance with prescribed inspection methods listed on I.P.I (In Process Inspection)</li><li>Processes work orders through ERP system.</li><li>Completes NCMRs to identify non-conforming product or material.</li><li>Monitors required training on a weekly basis.</li></ul> Work Environment: While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and vibration. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The position requires frequent lifting, pushing and pulling objects that are up to 50 pounds. Qualifications Knowledge/Skills: <ul><li>Communication Proficiency</li><li>Mathematical Skills</li><li>Mechanical Capacity</li><li>Technical Capacity</li><li>Time Management</li><li>Blueprint reading</li></ul> Education/Experience: <ul><li>High school diploma/GED.</li><li>Completion of a craft apprenticeship or applicable trade school is preferred.</li><li>Successful demonstration of CNC Operator Level 1 duties.</li><li>1-3 years of experience in a manufacturing environment is preferred.</li></ul> * Note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

CNC Operator Level 2-Night Shift

Who is Fibreworks Composites? Fibreworks Composites was founded in 2009 and is privately owned by Guenther Steiner and Joe Hofmann. In 2019 Joe and Guenther decided to launch an AS9100 / ISO certified sister company called Composite Factory. Composite Factory's primary focus is to diversify our business into Aerospace, Aero structures, Aviation and Defense, and the Medical industries that require a higher level of traceability and certification. Our core mission is to exceed our customers' needs by embracing challenges that surpass the capabilities of our competitors. Rooted in our extensive motorsport experience, our philosophy fosters a unique and dynamic work environment, empowering us to tackle a multitude of challenges. We are fully vertically integrated which enables us to complete tight timelines and exceed customer expectations. Come be a part of where the energy is; where the future of the composites industry is going and where leading edge technology companies come to develop the next generation of composite structures. Job Summary: If you are excited to be a part of a vertically integrated company that has a machine shop that utilizes cutting edge CNC capabilities that is among the most advanced in the country then our Machining Department is for you! You will oversee individuals responsible for operating of multi axis milling machines, for mold making and part trimming. Job Role: <ul><li>Instil core values, culture, structure and discipline into a newly invested division of Fibreworks Composites under the guidance of the Machine Shop Operations Manager</li><li>Oversee staff of CNC operators and shop help</li><li>Training of new hire operators and other staff utilizing tools developed by the company</li><li>Assist Machine Shop Operations Manager in tracking of work on machining floor</li><li>Coordinate bonding of "glue ups" and raw materials for current and upcoming jobs </li></ul><ul><li>Maintain/balance time and materials in ERP system for Assigned workers/machines</li></ul><ul><li>Feed stock and tool inventory levels to Machining Department Operations Manager</li></ul><ul><li>Responsible for adhering to company policies and procedures</li></ul><ul><li>Continually view and suggest improvements to processes</li><li>Daily monitoring of equipment for fit form and function and report anomalies to the Machine Shop Operations Manager </li><li>Utilize CAM software to produce programs and modify existing ones for increased efficiency while meeting GD&amp;T requirements</li><li>Utilize program verification and crash protection software to mitigate machine incidents </li><li>Create, document and back-up programs for system maintenance</li><li>Utilize drawings or CAD models to support program development</li><li>Create and maintain set-up sheets and tool lists for projects as required</li><li>Must adhere to health and safety procedures, and all workplace policies</li><li>People management in conjunction with Machine Shop Operations Manager</li><li>Prioritize programming to scheduled demands</li><li>Continually view and suggest improvements to processes</li><li>Other duties as assigned</li></ul> What You Will Bring to the Team: <ul><li>High School/GED diploma or vocational school equivalent required</li><li>5+ years of multi axis milling machining experience</li><li>Mastercam or similar programming experience</li><li>Understanding of the required discipline to machine patterns made of epoxy and composite part trimming</li><li>Have excellent math and mechanical skills/aptitude</li><li>The ability, desire and eye to do precision work</li></ul><ul><li>Excellent communication, interpersonal, and organizational skills</li></ul><ul><li>Ability to learn to read and interpret mechanical documents and drawings</li><li>Good computer skills (MS Office Suite)</li></ul><ul><li>Exemplary attendance</li></ul><ul><li>A keen eye for detail and results-driven approach</li></ul><ul><li>Must be able to follow written instructions from Work Instruction Sheets</li><li>Needs to have a strong appreciation of the importance of completing tasks on time</li><li>Must be adaptable to a changing work environment and completing demands</li><li>Must be a US Citizen or Permanent Resident</li><li>Must have valid drivers license and clean motor vehicle record</li></ul> What Fibreworks Will Bring to You: <ul><li>Medical benefits, dental, vision, long term disability and life insurance </li><li>Matching 401k</li><li>Discretionary quarterly bonuses based upon company performance</li><li>$1000 sign on bonus offered exclusively to new hires, not applicable to rehires within 12 months</li><li>Referral program</li><li>Employee Verizon discount</li><li>80 hours PTO vacation, 40 hours PTO sick</li></ul> Job Type: <ul><li>Exempt, full time</li></ul>Work Environment &amp; Physical Requirements: <ul><li>Combination of indoor and outdoor activities with varying conditions</li><li>Requires walking, standing, sitting, climbing, balancing, bending, reaching, handling, stooping, kneeling, and crouching</li><li>Ability to lift/carry/push/pull up to 50 pounds</li><li>May involve operating material handling equipment in a safe manner</li><li>Work may include exposure to variable noise levels, fumes, airborne particles, hazardous chemicals, etc., requiring personal protective equipment</li><li>Some positions may require working with small parts/components, necessitating excellent hand-eye coordination and manual dexterity</li><li>Specific vision abilities required, including close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus</li></ul>*Fibreworks Composites is an equal employment opportunity and affirmative action employer. We do not discriminate based upon race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, veteran status, marital status, parental status, cultural background or for any other reason.

Second Shift Machining Supervisor

$5,000 Hiring Bonus! Looking to join our team? Here's what we're looking for! Are you looking to join a company paving the way in the automotive industry? Are you eager to join a team of experts to learn from and work with? Would you like to work in a state-of-the-art facility? Speedway Motors has just upgraded our machine shop with a 75,000+ square foot expansion, and we need some new gearheads to join the team. Help us work with the latest and greatest machinery in the industry to build parts for hot rod and racing projects. If you want to work in a brand new facility with the best car building technology and experts with the deepest car knowledge in the industry, then keep reading! We believe strongly in our company values and live them out each day! We work together as One Team across all departments, Choose Positivity in everything we do, put People First, encourage speaking up because You Have a Voice, and above all else we are Driven to Succeed. If you can embrace these values and they align with who you are, then we'd love to chat with you! Job overview Under general supervision of the CNC Supervisor, the incumbent is responsible for set up, programing and operating CNC lathes and mills. The CNC Machinist I will perform basic programming using CAD/CAM package or programing at the machine. This position will provide training to CNC Machine Operators. This incumbent will machine parts and ensure that products meet Speedway's high-quality standards utilizing efficient operation of equipment. See us in action here! Shift <ul><li>2nd shift - 4:15pm to 2:45am, Monday through Thursday<ul><li>2nd shift earns a $3.00/hr shift differential</li></ul></li></ul> Overtime, if any, is worked on Fridays. No weekends are worked. *Compensation will depend on experience level. Here are the specifics: <ul><li>Perform quality inspections to ensure Speedway's quality standards are maintained</li><li>Monitor CNC productivity and efficiency and look for areas of improvement to quality and productivity</li><li>Operate and program parts using:<ul><li>CNC lathes with live tooling, Y-axis, sub spindles, and multiple turrets</li><li>CNC Swiss lathes</li><li>CNC VMC</li><li>Horizontal machining centers</li><li>5 axis machining centers</li><li>Manual machines in the shop which include:<ul><li>Mills, lathes, saws, drill presses, grinders, and miscellaneous hand tools</li></ul></li></ul></li><li>Use precision measuring instruments including gages, calipers, and micrometers to accurately measure components and finished parts, and ability to read blueprints.</li><li>Setup and operate lathes, mills and drill presses using established safety processes and procedures.</li></ul><ul><li>Monitor tooling life to prevent scrap.</li><li>Complies with safety regulations and maintains clean and orderly work areas.</li><li>Performs minor machine maintenance such as cleaning and lubrication of machines.</li><li>Constantly work to improve processes; make suggestions for productivity improvements, and optimize workflow, while meeting our customers' needs.</li><li>Maintain regular and reliable attendance.</li></ul><ul><li>Perform all other duties as assigned. </li></ul>We'll take care of you - here's how! We put our employees first, and care about your well-being and personal life. From a competitive benefits package and 401k plan to growth opportunities, we have your best interest in mind, always. <ul><li>Comprehensive Health, Dental and Vision Insurance</li><li>Retirement Plan with Company Match</li><li>Paid Time Off</li><li>Paid Holidays</li><li>Continuing Education Reimbursement</li><li>Wellness Program and Healthy Living Reimbursement</li><li>Discount on Speedway Motors Product, Extra Pay for Being Involved in the Industry (Attending Car Shows, Race Events, Creating Content for Automotive Blog), Rent Discount for all Speedway Properties, and Referral Bonuses.</li><li>Growth Opportunities</li><li>Paid Parental Leave</li><li>Four-Day Work Weeks</li><li>Steel Toe Shoe and Prescription Safety Glasses Reimbursement, Uniforms are Supplied</li></ul>Work Environment <ul><li>Ability to occasionally lift and carry &lt;50 lbs. and rarely push/pull up to 100 lbs.</li><li>Occasional walking and standing.</li><li>Rare bending, twisting, kneeling, squatting.</li><li>Occasional work above shoulder level and reach.</li><li>Frequent pinching, grasping, fine manipulation with fingers and must be able to use power tools.</li><li>Is knowledgeable in the procedures and safety measures in area(s) of specialty. Familiar with a variety of the field's concepts, practices, and procedures.</li><li>Occasional exposure to dust, dirt, steam, fumes-vapor and chemicals.</li><li>Heated and air-conditioned indoor work as well as rare outdoor activities in varying weather conditions.</li></ul><ul><li>Frequent exposure to moving mechanical parts.</li></ul>What you'll need to succeed in this position: <ul><li>Associates Degree in Precision Tooling with two to four years of related experience OR equivalent education and experience.</li><li>At least 18 years of age.</li><li>Must be able to program and operate CNC lathes and mills.</li><li>Familiarity with CAD(Computer Aided-Design)/CAM(Computer Aided-Manufacturing) packages and programming.</li><li>Must be familiar with basic machine shop equipment.</li><li>Able to communicate effectively through written and verbal communication.</li><li>Ability to accurately add, subtract, multiply and divide in all units of measure.</li><li>Must be able to read blueprints and use precision measuring tools, and inspection equipment.</li></ul><ul><li>Must work safely following established safety policies and procedures.</li><li>Must have basic computer knowledge.</li><li>Excellent interpersonal skills.</li></ul>If this sounds like you, we would love you to join our Speedway Family! Please include your resume to help us get to know you better. About Speedway Motors: Speedway Motors is the oldest speed shop in the USA. We're one of the biggest, too, and we help millions of car enthusiasts, racers, and gearheads create meaningful experiences they'll remember forever. With their friends, with their families, and in their community. We take that mission seriously, and it brings exciting problems to solve. See us in action at: <a href="http://www.speedwaymotors.com" target="_blank">www.speedwaymotors.com</a>.

CNC Machinist

MAURY MICROWAVE JOB DESCRIPTION Job Title: CNC Swiss Lathe Machinist III FLSA Status: Hourly - Full Time, 5:00 AM- 1:30 PM Department: Manufacturing Reports to (Title): Production Manager, Operations Company Profile: Maury Microwave is your calibration, measurement, and modeling solutions partner. By taking responsibility for all aspects of calibration, measurement, and modeling, we can empower you and help you succeed. We accomplish that by leveraging our measurement expertise to identify, create, and supply every single component from the smallest adapter to the largest test system, guaranteeing seamless integration. Our workplace is maintained to high standards, providing a clean and organized environment, while also featuring a temperature-controlled setting that fosters comfort and enhances overall productivity. Summary of Position: We are seeking a CNC machinist to join our team at our facility in Ontario, CA. In this position, you will be responsible for setting up, running, and troubleshooting CNC and conventional machines on site. Candidates will need strong experience operating CNC Mills and/or CNC Lathe turning centers and possess the ability to translates the engineering specifications into precision parts by determining how best to produce the required item and then manufacturing it accordingly. A level I &amp; II technician will be starting out and learning the process, but a Level III is expected to understand the process, how to apply learned skills and possess the talent to machine parts with very little supervision to meet or exceed the quality requirements of the drawings/specifications. A level-IV CNC machinist will also possess leadership qualities, as well as the skills to train and mentor others. Pay is based on the level the candidate can demonstrate. Essential Functions of the Position: <ul><li>Analyze and interpret blueprints, specifications, or sample parts to determine the dimensions and tolerances of finished work pieces to comply with Maury quality system</li><li>Experience operating 3 and/or 4-axis CNC Mill or CNC Lathes or Swiss multiple head turning machines</li><li>Maintains a clean and organized work area to 6S standards.</li><li>Utilizes required fixtures, holding devices, materials, inserts, tool holders, and installs pre-set tools into the machine.</li><li>Participation in continuous improvement in the area as well as other departments by identifying cause, problems, or need for correction</li><li>Check for machine readiness and regular maintenance is performed to ensure functionality and performance.</li><li>Works with programmers to resolve programming problems during the machining process.</li><li>Ensure safety and quality considerations and requirements are proactively addressed and implemented in product production processes.</li><li>Ability to plan machine set-ups, position workpieces, and operate various CNC machines to produce specified quantities of piece parts to specified tolerances. Deburr parts as needed to meet 100% quality</li><li>Perform first-piece inspections and make the necessary adjustments to the machine set-up to ensure parts are formed to designated tolerances.</li><li>Possess a strong attention to detail, report problems, discrepancies, and anomalies promptly</li><li>Ability to work independently, follow instructions, and concentrate for long periods.</li><li>Able to use a drop indicator, calipers, and micrometer for measuring</li><li>Able to lapp parts to achieve dimension and flatness</li><li>Must be able to work in a high-performance team setting to achieve common goals and work standards</li></ul>Required Skills: <ul><li>Basic PC skills, including Microsoft Office (Word, Excel, MRP).</li><li>English language skills and the ability to read, follow, and interpret planning and work order instructions are highly valued in this role. </li><li>Ability to professionally communicate and work cooperatively with others for fostering a positive and productive work environment.</li><li>Must be able to pass any customer-required testing/machining specifications about their parts and standards.</li><li>Must regularly lift and move physical inventory weighing up to 30 pounds.</li><li>Must be able to spend long periods standing.</li><li>Skill in following verbal and written directions and transferring instructions into action.</li><li>Ability to prioritize and complete multiple tasks and a high volume of work on a deadline.</li><li>Adheres to all workplace safety guidelines, policies, and laws determined by the company, state, and federal authorities</li><li>Intermediate math skills, including adding, subtracting, multiplication, division, and fractions, for print reading and tolerance determination. </li><li>Other tasks, as directed by management</li><li>Citizen Cincom Lathe experience preferred (C16, K16)</li></ul>Experience and Education: <ul><li>High school diploma or GED required</li><li>CNC operator/machinist, trade school diploma or certification preferred</li><li>Minimum five years of experience in a machine shop environment. </li><li>Minimum 3 years of experience in CNC mills and lathes machines.</li></ul>Physical Demands/Sensory Function: Frequency of Use: Stand Frequently Walk Frequently Sit Regularly Use hands Frequently Reach with hands and arms Frequently Climb or balance Occasionally Stoop, kneel, crouch or crawl Occasionally Safety glasses, shop coat, proper shoes. Frequently Exposure to shop element, i.e. noise, dust, odors and fumes Occasionally Work Hours Standard work hours of 40 per week but may be requested to work overtime as deemed necessary. Standard work scheduled is 5:00am to 1:30pm Monday through Friday, excluding holidays. This position requires the use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. Maury Microwave is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our career center because of your disability.

766 Full Time Jobs in United States