field_job_employment_type

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

field_job_salary_range

<ul><li>To make it understood that "the Customer is our first priority".</li><li>To setup CNC milling machines and complete first piece runs, including first piece inspections.</li><li>To operate CNC milling machines for production runs, including in process inspections as required per process control documentation.</li><li>To preform all necessary maintenance on CNC machine tools.</li><li>To use available inspection equipment to ensure every machined part under his/her direct control meets required dimensions.</li><li>To thoroughly document all manufacturing processes for future use.</li><li>To ensure the safety of themselves and others when working with cutting tools and CNC machines.</li><li>To ensure whenever possible that CNC machines run unattended during non business hours as much as possible.</li><li>To help develop new ideas that will increase productivity, product quality, and/or decrease rejects with respect to machining.</li><li>To maintain a clean working environment.</li><li>To adhere to company policies as described in the employee handbook.</li><li>To keep the Machine Shop Manager informed of any issue that may have an adverse affect on the well being of the company.</li><li>Attend or conduct meetings as necessary and required.</li><li>Any other duties or tasks assigned by the Machine Shop Manager.</li></ul>Requirements EDUCATION <ul><li>High School Diploma</li></ul> EXPERIENCE <ul><li>1-3 years minimum as CNC machinist</li></ul> SKILLS, KNOWLEDGE, AND ABILITIES: <ul><li>Ability to interact with employees.</li><li>Ability to effectively communicate, in English, both verbally and in writing.</li><li>Ability to setup and run CNC milling machines.</li><li>Ability to properly use inspection equipment to inspect machined parts.</li><li>Ability to perform machine and tool maintenance activities.</li><li>Ability to read and follow engineering drawings and perform machine set-ups.</li></ul> PHYSICAL REQUIREMENTS AND WORKING CONDITIONS <ul><li>Prolonged periods of sitting and standing</li><li>Ability to lift at least 80 lbs.</li><li>Vision and depth perception suitable for use of inspection microscopes</li><li>Environment: Climate controlled machine shop</li></ul>

CNC MACHINE OPERATOR (1st Shift)

Job Type Full-time Description • Effectively and safely mounts, installs, aligns and secures fixtures in machines. • Effectively set-up and tear-down tools and fixtures in accordance to established procedures; maintains accurate setup and production records per company standards. • Troubleshoot fixture, tooling, and production part problems as they are encountered. • Works with Engineering/Quality Control to be sure all dimensions and processes are in conformance by using precision inspection equipment to verify work and fixtures. • Perform start of shift and daily maintenance procedures on production equipment. • Reset production equipment and robots if malfunctions occur; works with key personnel to develop intermediate skills to work with automation including robot points and frames. • Monitor machine coolant/oil quality/ levels / predictive maintenance programs as required. • Analyze Problem Reports and make appropriate machine adjustments. • Confer with key personnel to resolve machine malfunctions and production issues. • Replaces dull or broken cutters, and pre-stages tools while machines are operating. • Demonstrates intermediate skills with Bridgeport, EZ Trak, and Surface Grinder as required. • Keeps accurate and timely records on the Computer Maintenance Software (CMS). • Maintains an organized, clean and safe work environment by following 6S standards. • Properly follows all H&amp;M procedures and policies. • Use correct P.P.E. per JHA's and Job Description; required to wear safety shoes with the standard F2412 and F2413 rating. Individuals trained in NFPA 70E Arc Flash are required to wear electrical hazard safety shoes with the F2412EH and F2413EH rating. • Participate in Continuous Improvement activities, including Idea System. Performs all other duties as assigned. Requirements • High School or Technical School Diploma, or General Education Degree (GED) preferred; Three to five years of related experience and/or training; or combination of education and experience. • Ability to read and interpret documents such as blueprints, part drawings, safety rules, operating and maintenance instructions, and procedure manuals; • Ability to write work instructions. • Ability to calculate basic math, use fractions, decimals and percent and apply basic concepts of geometry and trigonometry. • Ability to identify problems, collect data, establish facts and draw valid conclusions • Able to work Saturday and/or Sunday on a rotating basis to meet business needs.

2nd Shift CNC Tech

Proven to Perform. From the edges of space to the bottoms of ocean, our materials are proven to perform -- and so is our team. We're hiring high performers as proven as our products. Join us. ATI is currently seeking a Manufacturing Engineer (CNC Programming) to join our facility located in East Hartford, CT. The primary purpose of this job is to create CNC programs in NX and/or Master Cam to be able to machine parts on CNC equipment to customer requirements. Essential Functions (other duties may be assigned) <ul><li>Use NX or Master Cam to create CNC program to manufacture aerospace parts to finished dimensions</li><li>Develop the manufacturing process of a part</li><li>Understand the potential movement of a part during the machining process and how to control movement of the part</li><li>Follow software control procedures utilizing the DNC to control programs</li><li>Determine cutting tool type needed</li><li>Develop process routing in ERP system and update Bill of Requirements and Bill of Material</li><li>Create operation sheets, setup sheets, and part models in NX and/or Master Cam</li><li>Design tooling/fixtures needed for machining parts</li><li>Provide support in root cause analysis and process corrective action</li><li>Participate and support in continuous improvement activities</li></ul>Basic Requirements <ul><li>Bachelor degree in Engineering or equivalent years' experience</li><li>Minimum 5-7 years of experience in an engineering role with a metal working environment specific to turning and milling of forged and cast products for the aerospace industry</li></ul> Essential Skills <ul><li>Understanding of machine controls</li><li>Skilled in utilizing Unigraphics and Mastercam for programming, modeling, creating work instructions, i.e. operation sheets and setup sheets</li><li>Skilled in process expertise in turning, milling, and inspection, cutting tools and their materials, fixture and tool procurement, general setup, and part qualification practices</li><li>Ability to work well with others as a member of a team</li></ul> We thrive when the expectations are great, and the barriers are high. We're solving the world's most difficult challenges through materials science. Our advanced, integrated process technologies and proven performers give us a tremendous competitive advantage. When customers systems need to fly higher, dig deeper, stand stronger, and last longer -- anywhere on, above or below the earth -- ATI is proven to perform. *It is ATI's policy to not provide immigration sponsorship for any of the company's positions. ATI and its subsidiary companies will provide equal employment opportunities to all applicants without regard to applicant's race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, age, veteran status, disability status, or any other status protected be federal or state law. The company will provide reasonable accommodations to allow an applicant to participate in the hiring process if so requested.

Manufacturing Engineer (CNC Programming)

About the Organization PCX Aerosystems is a premier supplier of flight-critical mechanical systems and structures to leading aerospace OEMs and the US Government. With roots going back to the dawn of the helicopter age, PCX today is a private equity owned acquisition platform tasked with building a defense-focused, balanced portfolio of companies that manufacture, assemble and perform overhaul and repair services for a variety of fixed-wing and rotorcraft programs. Several of our businesses provide metal and composite components for space applications including satellites, spacecraft and rockets. Headquartered in Newington, Connecticut, we offer a competitive compensation &amp; benefits package and a business culture which rewards performance. For additional information on PCX Aerosystems, please visit our website at <a href="http://www.pcxaero.com" target="_blank">www.pcxaero.com</a>. Company Overview PCX Aerosystems currently has operations in Long Beach and Santa Ana, CA; Boylston, MA; and Newington, Enfield and Manchester CT. Each of these locations has a unique history, and we strive to maintain local entrepreneurial freedom, supported by the strength that comes from being part of a larger organization. Our workforce includes Associates in a wide variety of disciplines, including Engineering, Manufacturing, Program Management, Sourcing, Sales, Quality, Finance and Human Resources. The PCX Aerosystems teams seek to safely deliver on our customers' toughest requirements, while living our values, every day. We are a company that embraces diversity. EOE Statement PCX Aerosystems is an equal opportunity employer. Description FUNCTION: Set up, operate, troubleshoot and perform work on a variety of machinery. Be flexible, willing and capable of being trained on additional machines. Perform work at a consistently high level of quality. Be reliable in consistency of work and willingness to work outside of core area of expertise. Position Requirements TYPICAL DUTIES: <ul> <li>Must be capable &amp; willing to set up operations that have previously been proven out independently without oversight of a leadman or CNC programmer.</li></ul><ul> <li>Must be capable of running a minimum of two of the following machine types: 3 and 4 axis Horizontal and Vertical Machining Centers, 5 axis machining centers, Vertical Turret Lathes, Cylindrical Grinders, Mill/Turn machines, CNC boring machines, Horizontal lathes, manual machines.</li> <li>Must be willing to perform work on machines throughout the shop, not only the machines that are within the person's core area of expertise. For example: must be willing to perform work on a Mitsubishi 4 axis machining center even when the person normally runs a Mazak 730 Variaxis.</li> <li>Must be capable &amp; willing to identify opportunities for improvement in tooling, cutting methods, mistake proofing &amp; work instruction documentation.</li> <li>Must possess a skill level that eliminates errors that cause nonconforming material and maintain a consistent level of high quality work. Identify non-conformances at time of occurrence. Recognize opportunities for non-conformances and notify management of need for action.</li> <li>Actively participate in various aspects of Continuous Improvement projects which may include but is not limited to 5S, TPM, kaizen events, and set-up reduction events, which is aligned with the commitment to continuous improvement activities in Article II of the collective bargaining agreement.</li> <li>Must work safely at all times. Participate in safety improvement initiatives by raising any safety concerns and helping to come up with corrective actions.</li> <li>Must be capable &amp; willing to assist or train other employees in this or lower classifications as needed.</li> <li>Refer difficulties to leader or supervisor as appropriate May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department or cell objectives and to develop individuals' skills.</li></ul> Shift -not applicable- Full-Time/Part-Time Full-Time Location PCX Aerosystems, Newington Category Manufacturing Req Number MAN-24-00028 Position All Around Machinist - A Close Date Post Internal Days 0 Number of Openings 1 Exempt/Non-Exempt Non-Exempt Hiring Manager(s) This position is currently accepting applications.

All Around CNC Machinist A

GreenFoot Technologies is searching for a Swiss CNC Applications Engineer for our client at their Minneapolis, MN, Office and the same for their Windsor, Connecticut Office. These are Full-Time, Direct Hire Opportunities. Candidates must be eligible to work in the US. No third Parties. Roles and Responsibilities: <ul> <li>Running turnkey projects, demonstrations, and other customer-related projects to ensure they are completed on time and within budget</li> <li>Conducting pre-sale activities and reviews, including customer visits, evaluation of opportunities, machine assessment and recommendations, part processing recommendations and development of turnkey proposal</li> <li>Developing/implementing custom demonstrations and training customers in the safe set-up and operation of CNC machining centers, lathes, grinders, Swiss-style lathes, and/ or multi-tasking machines</li> <li>Conducts training of customers in the safe set-up and operation of CNC machining centers, lathes, grinders, Swiss-style lathes, and/or multi-tasking machines.</li> <li>Making accurate cost estimates, writing engineering reports, and interpreting plans and specifications</li> <li>Travel to customers for on-site training and engineering assistance.</li></ul>Qualifications: <ul> <li>Experience in Sliding Headstock (Swiss) CNC machine tool related engineering and manufacturing</li> <li>Possessing and maintaining an in-depth knowledge of machine tool industry and product lines represented by the company</li> <li>Knowledge of Fanuc-based controls and 5-axis experience is a plus</li> <li>Experience with CAD/CAM software is preferred but not required.</li> <li>Able to think quickly, assess a situation, and make a sound decision.</li> </ul> Additional Guidelines: <ul> <li>Must be comfortable with extensive travel @ 50-60%</li> <li>Benefits + relo</li> </ul>

Swiss CNC Applications Engineer

About the Organization PCX Aerosystems is a premier supplier of flight-critical mechanical systems and structures to leading aerospace OEMs and the US Government. With roots going back to the dawn of the helicopter age, PCX today is a private equity owned acquisition platform tasked with building a defense-focused, balanced portfolio of companies that manufacture, assemble and perform overhaul and repair services for a variety of fixed-wing and rotorcraft programs. Several of our businesses provide metal and composite components for space applications including satellites, spacecraft and rockets. Headquartered in Newington, Connecticut, we offer a competitive compensation &amp; benefits package and a business culture which rewards performance. For additional information on PCX Aerosystems, please visit our website at <a href="http://www.pcxaero.com" target="_blank">www.pcxaero.com</a>. Company Overview PCX Aerosystems currently has operations in Long Beach and Santa Ana, CA; Boylston, MA; and Newington, Enfield and Manchester CT. Each of these locations has a unique history, and we strive to maintain local entrepreneurial freedom, supported by the strength that comes from being part of a larger organization. Our workforce includes Associates in a wide variety of disciplines, including Engineering, Manufacturing, Program Management, Sourcing, Sales, Quality, Finance and Human Resources. The PCX Aerosystems teams seek to safely deliver on our customers' toughest requirements, while living our values, every day. We are a company that embraces diversity. EOE Statement PCX Aerosystems is an equal opportunity employer. Description Experienced CNC Milling Machinist is a senior level setup position. This position utilizes the machinist's skills and knowledge to efficiently perform and maintain the manufacturing processes on vertical and horizontal CNC milling machines to produce precision aerospace components. Responsibilities: <ul> <li>Independently set up and operate department machinery as required without supervision.</li> <li>Read/interpret machining program language required for machine operation at a high level.</li> <li>Use manual inspection equipment as required, e.g. height stands, micrometers, indicators, dial bores, verniers, etc., and the ability train associates on the use of said equipment.</li> <li>Work with aerospace materials such as aluminum, stainless steel, magnesium, titanium, and nickel alloys.</li> <li>Follow customer quality requirements and read/ interpret operation sheets and work instructions.</li></ul><ul> <li>Read/interpret reports from the CMM measuring equipment and understand the functionality of the machine.</li> <li>Collaborate with support groups i.e. engineering, and quality, to prevent or overcome production issues and work stoppages.</li></ul><ul> <li>Adhere to established policies and company procedures and standard work.</li> <li>Perform preventative maintenance tasks to maintain machinery performance and prevent machine downtime.</li> <li>Initiate and participate in process improvement initiatives utilizing lean manufacturing tools and techniques as approved by supervisor.</li> <li>Document and communicate manufacturing performance issues to maintain continuity between shifts and decrease machine downtime.</li> <li>Act as a role model, coach, and train new associates to foster a team environment.</li> <li>Maintain work areas and equipment in a clean and orderly condition.</li> <li>Follow all safety policies, rules, and regulations.</li> <li>Other duties as assigned by Leads, Supervisors and/or Managers.</li></ul>Physical Requirements: <ul> <li>Ability to stand or sit for extended period of time on a concrete manufacturing floor.</li> <li>Fine motor skills with frequent hand and arm movement.</li> <li>Ability to lift up to 50 pounds.</li> <li>Moderate twisting and bending.</li> <li>Moderate climbing on step stools or platforms.</li></ul>Unusual Environmental Conditions: <ul> <li>Loud machining environment; exposure to aerospace metals, lubricants, and chemicals.</li></ul>Required Personal Protective Equipment: <ul> <li>Safety glasses/shields, appropriate manufacturing closed toed footwear, gloves, hearing protection may be required, or other protective equipment as needed.</li></ul>Qualifications: <ul> <li>US Citizen</li> <li>High School Diploma or equivalent.</li> <li>Technical school graduate in machining (desired)</li> <li>Minimum of 7 Years of Machining Experience.</li> <li>Strong machine setup skills.</li> <li>Aerospace experience required.</li> <li>Ability to work with tight tolerances.</li> <li>Strong industrial math skills, trigonometry required.</li> <li>Strong written and verbal skills.</li> <li>Ability to read technical drawings.</li> <li>Ability to use and setup various measuring devices.</li> <li>Strong problem-solving skills.</li> <li>Lean basic knowledge i.e. 5S, setup reduction, TPM.</li> <li>Ability to read &amp; interpret machining program language.</li></ul> Position Requirements Shift Days Full-Time/Part-Time Full-Time Location PCX Aerosystems, Manchester Category Manufacturing Req Number MAN-24-00027 Position Experienced CNC Milling Machinist Close Date Post Internal Days 0 Number of Openings 1 Exempt/Non-Exempt Non-Exempt Hiring Manager(s) Lisa Czaja This position is currently accepting applications.

Experienced CNC Milling Machinist

Paragon Medical, a business of AMETEK, Is a trusted partner in medical device manufacturing, offering end-to-end solutions from concept to final production. With expertise across various applications, we deliver high-precision components and complete products tailored to exceed customer expectations. 2nd Shift Job Summary Under minimal supervision, sets up and operates Laser CNC Swiss Machines to process parts to blueprint specifications, following instructions and applying knowledge of operating procedures. Reports to Department Team Lead Essential Job Functions <ul> <li>Setup and run multiple CNC laser Swiss machines.</li> <li>Conduct first piece and in-process quality checks.</li> <li>Maintain tooling inventory, equipment, and supplies.</li> <li>Review, investigation, and completion of required daily documentation.</li> <li>Utilizes and abides by requirements and safety procedures.</li> <li>Complies with all quality policies, specifications, regulations, and instructions.</li> <li>Completes all required documentation and SPC required.</li></ul>Skills and Abilities <ul> <li>Ability to read and understand blueprints (GDT).</li> <li>The ability to perform quality checks on parts utilizing the proper instruments, such as micrometers, and calipers.</li> <li>Knowledge of tooling concepts, machining practices, and troubleshooting and debugging processes is required.</li> <li>Able to work flexible hours and over time when required to meet customer demand.</li> <li>General computer skills.</li></ul>Education, Experience, and Qualifications <ul> <li>High School Diploma or equivalent</li> <li>A minimum of 5 years experience as a Laser Swiss CNC Setup Operator.</li> <li>Ability to set up and troubleshoot Laser CNC Swiss machines.</li></ul>Physical Requirements Paragon Medical is a manufacturing environment. The employee must be able to remain in a stationary position, including sitting or standing for prolonged periods of time. The employee is expected to perform actions that include bending, kneeling, or crouching, reach, push, and/or pull objects. The ability to lift up to to 50 lbs with support. The employee will be required to communicate with others and work in a noisy environment. Paragon Medical will provide any reasonable accommodation to the for mentioned physical requirements. Compensation Salary Minimum: $70,000 Salary Maximum: $90,000 Incentive: Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.0 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 21,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK (NYSE:AME) is a component of the S&amp;P 500. Visit <a href="http://www.ametek.com" target="_blank">www.ametek.com</a> for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359.

Laser CNC Swiss Setup Operator

Paragon Medical, a business of AMETEK, Is a trusted partner in medical device manufacturing, offering end-to-end solutions from concept to final production. With expertise across various applications, we deliver high-precision components and complete products tailored to exceed customer expectations. First Shift Job Summary Under minimal supervision, operates Laser CNC Swiss Machines to process parts to blueprint specifications, following instructions and applying knowledge of operating procedures. Reports to Department Team Lead Essential Job Functions <ul> <li>Operates and run multiple CNC laser Swiss machines.</li> <li>Conduct first piece and in-process quality checks.</li> <li>Maintain tooling inventory, equipment, and supplies.</li> <li>Review, investigation, and completion of required daily documentation.</li> <li>Utilizes and abides by requirements and safety procedures.</li> <li>Complies with all quality policies, specifications, regulations, and instructions.</li> <li>Completes all required documentation and SPC required.</li></ul>Skills and Abilities <ul> <li>Ability to read and understand blueprints (GDT).</li> <li>The ability to perform quality checks on parts utilizing the proper instruments, such as micrometers, and calipers.</li> <li>Knowledge of tooling concepts, machining practices, troubleshooting and debugging processes is required.</li> <li>Able to work flexible hours and overtime when required to meet customer demand.</li> <li>General computer skills.</li></ul>Education, Experience, and Qualifications <ul> <li>High School Diploma or equivalent</li> <li>A minimum of 4 years' experience as a Laser Swiss CNC Operator.</li> <li>Ability to troubleshoot Laser CNC Swiss machines.</li></ul>Physical Requirements Paragon Medical is a manufacturing environment. The employee must be able to remain in a stationary position, including sitting or standing for prolonged periods of time. The employee is expected to perform actions that include bending, kneeling, or crouching, reach, push, and/or pull objects. The ability to lift up to 50 lbs. with support. The employee will be required to communicate with others and work in a noisy environment. Paragon Medical will provide reasonable accommodation for the forementioned physical requirements Compensation Salary Minimum: $40,000 Salary Maximum: $50,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.0 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 21,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK (NYSE:AME) is a component of the S&amp;P 500. Visit <a href="http://www.ametek.com" target="_blank">www.ametek.com</a> for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359.

Laser CNC Swiss Operator

Job Type Full-time Description The Company: PacAero Agawam, formerly Litron, is a renowned industry player in the Defense and Aerospace industries with specializations in RF/microwave package integration, laser welding, laser cutting, electroless Ni/gold plating, CNC machining, hermetic sealing, and medical device manufacturing. With a dedicated workforce of ~70 employees at our Agawam, MA facility, we operate across 23,000 sq ft and our mission is to serve the most demanding needs in aerospace, industrial and medical customers. Litron is a Qnnect Company, backed by Arcline private equity, with revenues above $17 million; Litron is ISO9001 certified and is compliant with U.S. government DFAR and ITAR requirements. CNC Machining Visual Inspector Summary: We are seeking a detail-oriented CNC Machining Visual Inspector to join our quality control team. The ideal candidate will be responsible for inspecting machined parts for dimensional accuracy and surface finish, with a strong emphasis on identifying and minimizing burrs. This role is critical in ensuring that our products meet the highest quality standards and specifications. This position is full-time, onsite and is located in Agawam, MA. Requirements <ul><li>Conduct thorough visual inspections of machined parts to identify defects, focusing on burrs and surface imperfections.</li><li>Utilize measuring tools such as calipers, micrometers, and gauges to verify dimensions and tolerances of machined components.</li><li>Maintain accurate inspection records, including findings related to burrs and other defects, and communicate results to relevant departments.</li><li>Collaborate with CNC machinists and production teams to discuss findings and implement corrective actions to reduce burr formation.</li><li>Participate in quality improvement initiatives aimed at reducing defects and enhancing production processes.</li><li>Assist in training CNC operators on best practices for minimizing burrs during machining processes.</li><li>Ensure all inspections are conducted in accordance with company quality standards and industry regulations.</li></ul> Qualifications: <ul><li>High school diploma or equivalent; additional technical training in machining or quality control preferred.</li><li>Proven experience in visual inspection, preferably in a CNC machining environment.</li><li>Strong understanding of machining processes and materials.</li><li>Familiarity with quality control standards and inspection techniques.</li><li>Excellent attention to detail and ability to identify subtle defects.</li><li>Effective communication skills to collaborate with team members and report findings.</li></ul> Skills: <ul><li>Proficiency with measurement tools and inspection equipment.</li><li>Strong analytical and problem-solving abilities.</li><li>Ability to work independently and as part of a team.</li><li>Knowledge of Lean Manufacturing principles is a plus.</li></ul> Working Conditions: <ul><li>May require standing for extended periods and occasional lifting of materials.</li><li>Work in a machine shop environment with exposure to noise and machinery.</li></ul>

CNC Machining Visual Inspector

Proven to Perform. From the edges of space to the bottoms of ocean, our materials are proven to perform -- and so is our team. We're hiring high performers as proven as our products. Join us. Primary Purpose of this Job The primary purpose of this job is to operate various types and sizes of computer numeric controlled production machine tools in the machining of forgings or stock to customer requirements and specifications using a variety of cutting tools. Essential Functions (other duties may be assigned) <ul><li>Work independently with/without minimal direction of senior personnel in functional area</li><li>Follows established quality and safety standards.</li><li>Receive work instructions, operation sheets, setup sheets, 1st piece and in-process check sheets from department supervision indicating such information as part and operation number to be performed</li><li>Read and interpret dimensional drawings, tool setup sheets and manufacturing instructions in performing required machining operations.</li><li>Operate various types of computer numeric controlled production machines in the machining of forgings made from various types of metal such as stainless steel, aluminum, chrome-nickel, Inconel, titanium, etc.; Machine forgings to close tolerance, e.g. +/- .001; operate multiple machines at the same time. </li><li>Perform basic machine setup with/without minimal direction from senior personnel in functional area</li><li>Load and unload pieces manually or with hoist; Apply coolant lubricant and change worn or damaged tools as required</li><li>Use precision or standard measuring devices such as inside and outside micrometers, dial indicators, Vernier scales, fixed frame gauges or special gauges, profilometers, etc. to check machined dimensions and surface finishes conforming to customer prints and/or specifications</li><li>Exercise care in handling of material before and after the machining operation</li></ul>Basic Qualifications High School Diploma or Equivalent, Vo-Tech Certificate or associate degree in electrical, mechanical or another related curriculum <ul><li>1 year of experience in a transferrable industry with transferrable skills.</li><li>Basic reading, math, and measurement comprehension. The ability to read instructions, and perform simple measurements is critical.</li></ul> Preferred Qualifications <ul><li>3-10 years of previous machining experience</li><li>Knowledge of basic machining principles</li><li>Knowledge of GD&amp;T</li><li>Excellent oral and written communication skills</li><li>Exceptional interpersonal skills</li><li>Strong analytical skills to analyze and resolve difficult problems effectively and implement long-term solutions</li></ul><ul><li>Excellent organizational skills</li><li>Ability to use hand tools, measuring instruments, and gages to ensure proper setups and machining operations</li><li>Ability to operate multiple machines at the same time</li></ul> We thrive when the expectations are great, and the barriers are high. We're solving the world's most difficult challenges through materials science. Our advanced, integrated process technologies and proven performers give us a tremendous competitive advantage. When customers systems need to fly higher, dig deeper, stand stronger, and last longer -- anywhere on, above or below the earth -- ATI is proven to perform. *It is ATI's policy to not provide immigration sponsorship for any of the company's positions. ATI and its subsidiary companies will provide equal employment opportunities to all applicants without regard to applicant's race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, age, veteran status, disability status, or any other status protected be federal or state law. The company will provide reasonable accommodations to allow an applicant to participate in the hiring process if so requested.

11 Full Time Jobs in East Hartford, CT, USA