field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

field_job_salary_range

Would you consider moving to a beautiful part of the country? Excellent cost of living. Great hunting, fishing, boating, skiing, snowmobiling etc... Mount Mfg is located in beautiful Marquette, MI. They are looking for a “CNC Swiss-Lathe Setup Machinist” for the afternoon shift. -----Job Title: CNC Swiss-Lathe Setup Machinist - Afternoon ShiftDepartment: OperationsReports to: CNC Turning ManagerSchedule: 3:30pm – 11:30pm, Monday - FridayCompany: Mount Mfg is an orthopedic contract manufacturing company located in Marquette, MI. The company operates with a quality system that is ISO 13485:2016 certified and FDA registered.Job Responsibilities:<ul><li>Setup, trouble-shoot and operate CNC Swiss Lathes (sliding headstock) including tooling installation, offsets, work-holding, coolant lines (high and low pressure), and understand and perform all conventional methods of swiss machining</li><li>Perform minor program adjustments as needed when approved by manager (i.e. deburring passes, order of operation, speed &amp; feed adjustments, etc)</li><li>Perform and document in-process inspection utilizing good documentation practices</li><li>Assist co-workers in the troubleshooting of CNC machining issues</li><li>Ability to read and interpret prints and GD&amp;T per ASME Y14.5</li><li>Attend Pre-production Meetings as needed</li><li>Must have social skills to adequately operate in a team environment and maintain a positive company culture</li><li>Act as a leader and mentor to new operators learning CNC machining</li><li>Other duties as assigned</li></ul>Experience/Education: High School Diploma, and 5+ years experience in a relevant manufacturing environment with minimum 2 years of swiss-lathe setup experienceExperience with 21 CFR Part 820 and ISO 13485:2016 preferred but not requiredKnowledge of common manufacturing processes such as CNC milling, CNC turning, blast finishing, laser marking, cleaning, passivation, anodization, heat treatment, forming, etc. preferred but not required.Travel Requirements: Minimal. Occasional technical training workshopsJob Type: Full-timePay: $26.00 - $35.00 per hourBenefits:<ul><li>401(k)</li><li>401(k) matching</li><li>Dental insurance</li><li>Flexible schedule</li><li>Health insurance</li><li>Health savings account</li><li>Life insurance</li><li>Paid time off</li><li>Vision insurance</li></ul>Schedule:<ul><li>8 hour shift</li><li>Day shift</li><li>Monday to Friday</li></ul>Education:<ul><li>High school or equivalent (Required)</li></ul>Experience:<ul><li>Swiss-lathe setup: 2 years (Required)</li><li>CNC Machining: 3 years (Required)</li></ul>Work Location: In person

CNC Swiss Setup Machinist in Marquette, MI - Relocation $ Provided

Want to join a Modern Machine Shop Top Shop and help us disrupt the manufacturing industry by advancing the future of flight? If so, apply today to join our team!&nbsp;What You’ll Do<ul><li>Use Mastercam to develop CNC programs for aircraft and space engine hardware, continuously improving upon existing processes and updating programs accordingly</li><li>Define and maintain manufacturing processes by studying customer blueprints and testing manufacturing methods, tooling, and equipment</li><li>Utilize Solidworks to lead the design of work-holding and tooling to support production schedules.&nbsp;</li><li>Responsible for the design and development of work holding, custom tooling, and gauging to meet customer inspection specifications</li><li>Support the production floor by troubleshooting problems and implementing solutions to keep machines running conforming parts</li><li>Drive continuous improvement and cost reduction opportunities in machining processes by leveraging new cutting and automation tools with external vendors</li><li>Manage tooling being returned from completed jobs (evaluate condition, sharpen as needed, and put away in vending solution, etc.)</li><li>Maintain tool set up sheets, record programming changes, and sustain appropriate engineering paperwork</li></ul>What We Are Looking For &nbsp;<ul><li>Bachelor's or Associates Degree in Mechanical or Industrial Engineering or equivalent preferred</li><li>Minimum of 4 years of CNC programming in a machine shop required</li><li>Strong proficiency in GD&amp;T per ASME Y14.5M</li><li>Experience with Mastercam 2023/2024, certification a plus</li><li>Proficiency with Siemens and/or Fanuc controllers, DMG Mori machine tool experience is preferred</li></ul>Why Northeast Tool? &nbsp;<ul><li>Competitive pay&nbsp;</li><li>Medical, dental, vision, and life insurance&nbsp;</li><li>Company Matched 401K (Roth and Traditional)&nbsp;</li><li>Challenging and rewarding career</li><li>Family, team-focused working environment&nbsp;</li></ul>We believe the only way our company can grow is when we nurture the growth of our employees. We are committed to working hard, having fun, and making an impact in our community. Sound too good to be true? Apply today to join our team.&nbsp;

Northeast Tool & Manufacturing

Rethinking Precision Manufacturing

Manufacturing Excellence 

Multi-Axis Turning Applications

$100k - $140K CNC Programmer in Charlotte NC - Relocation $ Provided

Exciting opportunity to work for a reputable company in the racing industry, located in beautiful Mooresville, NC. This is a true machinist role - prove out program, operate, and QC parts.Top of the line Mazak equipment.&nbsp;-----The CNC Multi-Axis Machinist will produce machined parts by setting up and operating 4 and 5-axis CNC machine tools. &nbsp;Responsibilities:&nbsp;<ul><li>Manufacture parts with 4 and 5-axis CNC machines by using industry standard machining techniques and practices while adhering to quality assurance procedures and processes.</li><li>Plan machining from work schedules and engineering drawings and CAD. &nbsp;</li><li>Work independently or with other Machine Shop staff to determine work holding, tool holding, and tools required for jobs.</li><li>Anticipate tooling and material needs, check inventory, and place orders with supervisor as needed.</li><li>Directly program using Mazatrol or load CAM program to CNC machines.</li><li>Manufacture parts using conventional machining equipment (manual machines, saws, etc.) and other CNC equipment as required.</li><li>Maintain and update manufacturing information as per company directive.</li><li>Maintain safe operations in compliance with safety procedures and regulations.</li><li>Maintain equipment by completing preventative maintenance requirements following manufacturer’s instructions and standards set forth by management. &nbsp;When necessary, repair machines and equipment and test operation of unit to ensure functionality and performance. &nbsp;</li><li>Use effective oral and written communication to include proper programming, set-up sheets and suggestions for improvement.</li><li>Accomplish organizational goals by accepting ownership and personal accountability for job done.</li><li>Responsible for keeping equipment and work area clean and orderly according to company standards.</li><li>Arrive on time for scheduled work, work overtime and weekends as necessary.</li><li>Be dependable and professional, act with integrity, work effectively with others, take initiative, and be willing to apply new knowledge and skills.</li><li>Other duties as assigned.&nbsp;</li></ul>Qualifications: &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;<ul><li>High school machining program and / or post-secondary technical school with earned diploma, certificate, or degree in machining trade training preferred.</li><li>5 years minimum experience operating 4 and 5-axis CNC machining centers and mill-turn machines. &nbsp;Mazak Mazatrol experience is a plus.</li><li>Must be able to work independently and possess strong CNC setup, operating, and machine G-coding abilities.</li><li>Experienced with precision measuring instruments, both digital and analog.</li><li>Can read and understand drawings and specifications with above average understanding of geometric tolerancing and dimensioning (GD&amp;T).</li><li>Knowledge of work holding, tool holding, and tooling equipment used in CNC working environment.</li><li>Must possess above average math skills.</li><li>Must possess basic computer skills.</li><li>Must be able to lift 50 lbs.</li><li>Must be able to adapt to frequent change, delays or unexpected events with a positive and constructive attitude.</li><li>Must be willing and able to work flexible hours due to changing work schedules and demands.</li><li>Must possess strong English communication skills (oral and written) as it relates to the job.</li><li>Must be able to produce parts to deadlines, accurate to the print and with a quality finish.</li></ul>

CNC Multi-Axis Machinist in North Carolina - Relocation $ Provided

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency ("RF") components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards ("PCBs"). TTM stands for time-to-market, representing how TTM's time-critical, one-stop manufacturing services enable customers to shorten the time required to develop new products and bring them to market. Additional information can be found at <a href="http://www.ttm.com" target="_blank">www.ttm.com</a> Scope: <ul><li>The Machinist is responsible for programming and operating equipment.</li></ul>Duties and Responsibilities: <ul><li>Operate 3 and 4 axis CNC milling machines</li><li>Work with engineers and technicians to troubleshoot minor mechanical malfunctions.</li><li>Perform operator maintenance by complying with individual machine procedures, facilitating access to equipment by maintenance personnel, and practicing good housekeeping.</li><li>Mentor less experienced operators.</li><li>Meet production requirements by following the dispatch list, working to meet daily production goals, participating in shift crossovers, assisting the technician and supervisor with work flow, and working to increase level of personal/module productivity.</li><li>Meet Quality Requirements by completing necessary training and certifications, conforming to ISO procedures, maintaining continued operation of machines, utilizing proper handling methods, following material review board process, recognizing quality issues, following applicable processes, recognizing specific registration or scaling issues, and increasing level of personal/module quality.</li><li>Meeting safety requirements by wearing required personal protective equipment, following general housekeeping guidelines, and adhering to cardinal rules of safety.</li><li>Operate miscellaneous equipment such as the laser drill, scope, bevel, and oven.</li><li>Begin to run cross functions within department such as operating routing machines.</li></ul>Note: The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer. Essential Knowledge and Skills: <ul><li>Ability to complete sheet metal fabrication preferred.</li><li>Ability to program using FANUC machine language and HAAS controller experience.</li><li>Ability to generate simple programs for a conversational control system on a 3 axis vertical milling machine.</li><li>Knowledgeable with calipers and micrometers; blue print reading.</li><li>Ability to cross train and become certified in most (or all) operations in the department.</li><li>Participates in departmental or company-wide improvement initiatives.</li><li>Serves as resource for less experienced personnel and accepts additional responsibilities.</li><li>Consistent record or high Productivity and Quality.</li><li>Must have the following traits and attitudes: accountable, adaptable, confident, coordinated, cross-trainable, handles stress effectively, positive attitude, helpful, goal oriented, organized, patient, and responsible.</li><li>Ability to work overtime and weekends if necessary.</li></ul> Education and Experience: Required Experience: <ul><li>Prior CNC training required</li></ul> Preferred Experience: <ul><li>Two to four years of PCB experience is desirable.</li></ul> #LI-PG1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401K, Flexible Spending Account, Health Savings Account, accident benefits, life insurance, disability benefits, paid vacation &amp; holidays. Benefits are available 1st of the month following date of hire. Compensation for roles at TTM Technologies varies depending on a wide array of factors including but not limited to the specific office location, role, skill set and level of experience. As required by local law, TTM provides a reasonable range of compensation for roles that my be hired in New York, California and Colorado. For California-based roles, compensation ranges are based upon specific physical locations. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

CNC Machinist - 1st Shift - $2000 Sign N Stay Bonus

Job Type Full-time Description This position will be Friday, Saturday and Sunday 12 hour days, this will be 36 hours worked but will be paid for 40 hours. Works independently to set up and ensure the operation of machines and related equipment to produce quality products. • Effectively and safely mounts, installs, aligns and secures fixtures in machines. • Effectively set-up and tear-down tools and fixtures in accordance to established procedures; maintains accurate setup and production records per company standards. • Troubleshoot fixture, tooling, and production part problems as they are encountered. • Works with Engineering/Quality Control to be sure all dimensions and processes are in conformance by using precision inspection equipment to verify work and fixtures. • Perform start of shift and daily maintenance procedures on production equipment. • Reset production equipment and robots if malfunctions occur; works with key personnel to develop intermediate skills to work with automation including robot points and frames. • Monitor machine coolant/oil quality/ levels / predictive maintenance programs as required. • Analyze Problem Reports and make appropriate machine adjustments. • Confer with key personnel to resolve machine malfunctions and production issues. • Replaces dull or broken cutters, and pre-stages tools while machines are operating. • Demonstrates intermediate skills with Bridgeport, EZ Trak, and Surface Grinder as required. • Keeps accurate and timely records on the Computer Maintenance Software (CMS). • Maintains an organized, clean and safe work environment by following 6S standards. • Properly follows all H&amp;M procedures and policies. • Use correct P.P.E. per JHA's and Job Description; required to wear safety shoes with the standard F2412 and F2413 rating. Individuals trained in NFPA 70E Arc Flash are required to wear electrical hazard safety shoes with the F2412EH and F2413EH rating. • Participate in Continuous Improvement activities, including Idea System. Performs all other duties as assigned. Requirements • High School or Technical School Diploma, or General Education Degree (GED) preferred; Three to five years of related experience and/or training; or combination of education and experience. • Ability to read and interpret documents such as blueprints, part drawings, safety rules, operating and maintenance instructions, and procedure manuals; • Ability to write work instructions. • Ability to calculate basic math, use fractions, decimals and percent and apply basic concepts of geometry and trigonometry. • Ability to identify problems, collect data, establish facts and draw valid conclusions • Able to work Saturday and/or Sunday on a rotating basis to meet business needs.

Weekend CNC Technician Level 2

Are you ready to give your career a boost by bringing your talents and expertise to some of the nation's top companies? Let Medix partner with you to give you the edge you need! We currently have excellent assignments within Life Science, Engineering, and Healthcare, all in fast-paced environments. See details below and apply now if interested as we are hiring immediately! CNC Machinist Details CNC Machinist Monroe, CT M-F, 3rd Shift and Weekend Shift Available $20/hr to $30/HR, based on experience QUALIFICATIONS: <ul><li> Previous experience working in a manufacturing setting is preferred but willing to train </li><li> the right candidate </li><li> Must have strong attention to detail </li><li> Familiarity and skill with interpreting technical drawings and blueprints </li><li> Ability to work independently and closely follow directions is essential </li></ul> RESPONSIBILITIES: <ul><li> Follows documented procedures for generating assigned production work daily. </li><li> Loads fixtures and makes adjustments to processes as needed </li><li> Utilizes a microscope to inspect parts and identify quality issues </li><li> Refers to blueprints to ensure jobs are processed in accordance with specifications </li><li> Monitors equipment to ensure that it is in proper working order. Recommends maintenance and repair </li><li> Sets up jobs as appropriate </li><li> Maintains a safe and healthy work environment by following standards and procedures; complying with legal regulations. </li><li> Updates job knowledge by participating in educational opportunities; reading technical publications. </li></ul> Benefits Supplemental medical, Dental, Vision coverage Term life Insurance plan PTO accrual 401K CNC Machinist Apply Now! #MedixSouth

CNC Machinist

Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufactures of precision machined parts in the United States. Our mission is to help manufactures maintain a competitive advantage in the world economy by improving productivity. Trident Machine Tools, a division of the Morris Group, Inc., is one of the nation's largest distributors of Haas F1 CNC machine tools, work holding, automation systems and robotics. Summary of Responsibility: The team is looking for an upbeat and passionate CNC Manufacturing Engineer to support our customers and internal sales team. Working alongside the sales team, this role will take an innovative, hands-on approach to CNC manufacturing, while designing, owning, and implementing custom manufacturing solutions for our customers. This role will have direct responsibility for developing solutions, training, and supporting our team and our customers technical needs in the CNC arena. With a strong emphasis on automated solutions, robotics, and training, you will define and build the organizational support needed to grow new and existing revenue streams. What You Will Contribute: <ul><li>Part programming of CNC Machine Tools, process development, and customer training.</li><li>Conducting pre-sale activities and reviews including customer visits, evaluation of opportunities, machine assessment and recommendations, and part processing recommendations</li><li>Drafting accurate cost estimates, writing engineering reports, and interpreting plans and specifications </li><li>Programming and setting up CNC lathes, CNC vertical or horizontal mills with automation and robotics.</li><li>Developing/implementing customer demonstrations and training users in the safe set up and operation of CNC machining centers, lathes and robots.</li><li>Possessing and maintaining an in-depth technical knowledge of product lines represented by the company. </li></ul>Other Functions: <ul><li>Perform related duties as required</li></ul> The duties listed above are intended only as illustration of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar or a logical assignment to the position. Qualifications &amp; Competencies: <ul><li>Strong hands-on machining background with at least 5 years of demonstrated ability in process development and programming of CNC machines.</li><li>Haas experience is preferred, but not required.</li><li>Confirmed working knowledge of MasterCam and/or AutoDesk software is preferred.</li><li>Excellent customer service and effective interpersonal skills required.</li><li>Tooling and ancillary machining equipment knowledge is a must.</li><li>Frequent travel throughout our regional territory; some overnight travel required.</li></ul>What's in it for You: We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work: <ul><li>Competitive starting salary</li><li>Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance</li><li>Paid Time Off, starting with 23 paid days off in your first year.</li><li>10 Company Paid Holidays</li><li>401(k) retirement plan with company contribution</li><li>Tuition reimbursement</li><li>Employee appreciation events and perks</li><li>Employee Assistance Program</li></ul>Mental and physical requirements: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to optimally perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. <ul><li>Highly mobile, able to access all areas of the premises.</li><li>Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities and projects.</li><li>Able to perform bending, twisting, stooping, reaching and lifting of moderate to heavyweight material up to 50 lbs.</li><li>Is frequently required to use hands to finger and reach with hands and arms.</li><li>Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus.</li><li>Ability to keep their composure with the public and co-workers in everyday, stressful situations.</li></ul>Morris Group, Inc., including all operating subsidiaries, is an Equal Opportunity Employer-M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity, or any other protected class. Job Requisition: 869A Locations Windsor, CT

CNC Applications Engineer

Job Description Summary The candidate must set up and run 3 axis CNC equipment along with other toolroom equipment as needed. They will also be responsible for prepping tooling and raw materials for the CNC, as well as machine maintenance, coolant changes and deburring parts, etc. The candidate must be willing to perform other tasks as requested by the Supervisor and Lead. They must also be focused as a team member working in a team environment to achieve business needs. Job Description We are the makers of possible BD is one of the largest global medical technology companies in the world. Advancing the world of health™ is our Purpose, and it's no small feat. It takes the imagination and passion of all of us-from design and engineering to the manufacturing and marketing of our billions of MedTech products per year-to look at the impossible and find transformative solutions that turn dreams into possibilities. We believe that the human element, across our global teams, is what allows us to continually evolve. Join us and discover an environment in which you'll be supported to learn, grow and become your best self. Become a maker of possible with us. Responsible for manufacturing components by programming, assembling, and operating automated machines (i.e., CNC Lathe, Milling Machine). Will also be responsible for inspecting parts per blueprints and making minor adjustments to equipment to ensure quality standards are achieved. Additionally, this role will support production activities in other areas as needed. ESSENTIAL FUNCTIONS <ul><li>Programming of CNC machines using Mastercam software.</li><li>Operating CNC machines to perform complex functions such as boring, milling, drilling, etc.</li><li>Inspecting work produced to ensure it meets specifications.</li><li>Monitoring machine performance and making adjustments to improve efficiency and minimize downtime.</li><li>Maintaining records of production runs, including time, materials used, and product specifications.</li><li>Assisting other departments with their operations when necessary.</li></ul>JOB QUALIFICATIONS / KNOWLEDGE REQUIREMENTS <ul><li>Knowledge of GD&amp;T principles.</li><li>Ability to read and interpret drawings.</li><li>Experience in machining processes and techniques.</li><li>Proficiency in using measuring tools such as calipers and micrometers.</li><li>Familiarity with CAD/CAM software such as SolidWorks or Inventor.</li><li>Good problem-solving skills and attention to detail.</li><li>Basic understanding of shop safety practices.</li><li>Ability to lift up to 50 lbs.</li><li>Available to work overtime as needed.</li></ul>EDUCATION AND EXPERIENCE REQUIREMENTS <ul><li>High school diploma/GED preferred</li><li>Minimum of 2 years experience in machining and working with CNC machines, required.</li></ul>For certain roles at BD, employment is contingent upon the Company's receipt of sufficient proof that you are fully vaccinated against COVID-19. In some locations, testing for COVID-19 may be available and/or required. Consistent with BD's Workplace Accommodations Policy, requests for accommodation will be considered pursuant to applicable law. Why Join Us? A career at BD means being part of a team that values your opinions and contributions and that encourages you to bring your authentic self to work. It's also a place where we help each other be great, we do what's right, we hold each other accountable, and learn and improve every day. To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you'll discover a culture in which you can learn, grow, and thrive. And find satisfaction in doing your part to make the world a better place. To learn more about BD visit <a href="https://bd.com/careers" target="_blank">https://bd.com/careers</a> Becton, Dickinson and Company is an Equal Opportunity/Affirmative Action Employer. We do not unlawfully discriminate on the basis of race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, or any other protected status. #earlycareer Primary Work Location USA CT - Canaan Additional Locations Work Shift US BD 1st Shift 7am-330pm (United States of America)

CNC Machinist/Toolmaker

Job Type Full-time Description Carolina Precision Technologies (CPT) is a premier, full-service precision manufacturer for the medical and aerospace industries. We are a market leading manufacturer of implants, specialty surgical instruments, cutting tools, and delivery systems for the orthopedic, sports medicine, trauma, extremities and other MedSurg applications. We are currently seeking a full time CNC Lathe Setup/Programmer at our facility in Putnam, CT. The ideal candidate will have experience in a production environment with good communication and an ability to learn quickly. • First Shift Openings • Second Shift Openings Responsibilities and Duties • Setup / Program CNC Lathes and/or turn/mills • Efficiently operate machines when not programming or in setup • Inspect parts per print and in process documentation • Clear chips and maintain safe work environment Qualifications and Skills Preferred Experience: • 1 to 5 years in machine shop environment • CAM software (part maker/ Mastercam) experience is a plus • Proficient use of micrometers, gauging, and comparator • Familiarity with Eurotech machines and Fanuc controls a plus • Skilled blue print reading Minimum Requirements • High School Graduate or Equivalent • Proficiency in general math • Ability to stand for 8 hours and lift up to 50 lbs. Benefits Competitive salary including a full range of health benefits, paid time off, eligible for 401k after 3 months of service. Pay will be based on experience. For more information on Carolina Precision Technologies please visit our website <a href="https://carolinaprecision.com/" target="_blank">https://carolinaprecision.com/</a>

CNC Lathe Setup/Programmer

Job Type Full-time Description Carolina Precision Technologies (CPT) is a premier, full-service precision manufacturer for the medical and aerospace industries. We are a market leading manufacturer of implants, specialty surgical instruments, cutting tools, and delivery systems for the orthopedic, sports medicine, trauma, extremities and other MedSurg applications. We are currently seeking a full time CNC Mill Setup/Operator at our facility in Putnam, CT. The ideal candidate will have experience in a production environment with good communication and an ability to learn quickly. <ul><li>First Shift Openings</li><li>Second Shift Openings</li></ul> Responsibilities and Duties <ul><li>Setup/Operator CNC Milling Machines</li><li>Inspect parts per print and in process documentation</li><li>Clear chips and maintain a safe work environment</li></ul> Required Experience and Skills <ul><li>1 to 5 years in a machine shop environment</li><li>Ability to understand G/M code and create/edit programs</li><li>CAD/CAM programming experience (mastercam experience a plus)</li><li>Proficient use of micrometers, gauging, and comparator</li><li>Familiarity with Vertical and Horizontal machines using 3, 4, and 5 axis</li><li>Skilled blueprint reading</li></ul> Other Qualifications <ul><li>High School Graduate or Equivalent</li><li>Proficiency in general math</li><li>Ability to stand for 8 hours and lift up to 50 lbs</li></ul> Benefits Competitive salary including a full range of health benefits, paid time off, 401k after 3 months of service. Pay will be based on experience.

30 Full Time Jobs in Connecticut