field_job_employment_type

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

field_job_salary_range

Great opportunity at a growing defense contractor with a state-of-the-art manufacturing facility.&nbsp;✔️ Paying $25 - $35 per hour depending on experience 💲 💰 &nbsp;✔️ Star swiss machines✔️ Complimentary breakfast and lunch everyday for all employees✔️ Fantastic benefits!✔️ There is plenty of growth opportunity at this shop 🚀 📈Apply now to explore further!---Gwynedd Manufacturing, a growing defense contractor located in North Wales, PA, is a state-of-the-art manufacturing facility dedicated to producing quality products for the U.S. Department of Defense and various U.S. Federal Law Enforcement Agencies. As an innovative company offering a wide array of products, we strive to continuously develop new technology and drive process improvement. The CNC Swiss Lathe Operator will fabricate metallic and nonmetallic parts using fit-for-purpose fixtures, tools and machines, including Computer Numeric Controlled (CNC) machines. Requires understanding of fundamental mathematics including basic geometry, making precise measurements with appropriate gauges, ability to perform simple deburr or polishing of metal components, and basic understanding of part handling and movement.Responsibilities<ul><li>Operate machines as programmed or perform manual processes with limited direct supervision, communicating any malfunctions or quality problems immediately to the supervisor.</li><li>Deburr/polish parts as they come off the machine in accordance with established work practices specific to the parts being made.</li><li>Check parts for visual defects and anomalies.</li><li>Use supplied gages and measuring equipment to ensure parts conform to all stated requirements from the process or operation just completed.</li><li>Apply knowledge of standard Mil-spec dimensions that are commonly used on our parts.</li><li>Meet production and quality goals.</li><li>Maintain machines as required and keep a clean and clear work area.</li></ul>Requirements<ul><li>Must be able to lift 50 pounds.</li><li>High school diploma or equivalent.</li><li>Basic math skills.</li><li>1-3 years as a Swiss Lathe Set Up Operator</li></ul>Gwynedd Manufacturing is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties and responsibilities. Management reserves the right to assign or reassign duties to this job at any time.Benefits<ul><li>Medical – IBC</li><li>Dental – The Standard Insurance Company</li><li>Vision – IBC – included in medical premium</li><li>Company Paid Life Insurance – The Standard Insurance Company</li><li>Group Additional Life and AD&amp;D Insurance-The Standard</li><li>Group Short and Long Term Disability Insurance- The Standard</li><li>401 (k) w/ match – Aon (VOYA) (90 Days after full-time hire)</li><li>Paid Time Off (PTO)</li><li>10 Company Paid Holidays</li><li>Complimentary breakfast and lunch everyday for all employees</li></ul>

Gwynedd Manufacturing

CNC Swiss Lathe Set Up Operator

Great opportunity at a growing defense contractor with a state-of-the-art manufacturing facility.&nbsp;✔️ Paying $33 - $45 per hour depending on experience 💲 💰 &nbsp;✔️ Star swiss machines✔️ "PartMaker / NX CAD/CAM software✔️ Complimentary breakfast and lunch everyday for all employees✔️ Fantastic benefits!✔️ There is plenty of growth opportunity at this shop 🚀 📈Apply now to explore further!---Position Description:Gwynedd Manufacturing, a growing defense contractor located in North Wales, PA, is a state-of-the-art manufacturing facility dedicated to producing quality products for the U.S. Department of Defense and various U.S. Federal Law Enforcement Agencies. As an innovative company offering a wide array of products, we strive to continuously develop new technology and drive process improvement.As a CNC Swiss Lathe programmer, you will be responsible for reading and interpreting technical blueprints, inputting the design specifications, adjusting the machine cutting paths, and performing quality checks on the final product. You will also be required to setup the machines and troubleshoot any issues that arise during the manufacturing process. To ensure success as a CNC Swiss Lathe Programmer, you should have extensive experience working in manufacturing, a keen eye for detail, and the ability to work independently.Responsibilities :<ul><li>Analyzes drawings, models, and design data of part to determine best practices for selection of tool path, cutting tools and associated speed and feed data, according to knowledge of machine shop processes, part specifications, and machine capabilities</li><li>Computes angular and linear dimensions, radii, and curvatures, and outlines sequence of operations required to machine part using Partmaker/NX software</li><li>Determine zero offset positions at machine for programs</li><li>Set all tooling in machine</li><li>Writes instruction sheets and tool lists to guide setup and continued operation of machine</li><li>Compares computer printout with original program sheet to assure accuracy of machine instructions</li><li>Changes program to eliminate instruction errors or omissions</li><li>Observes operation of machine on trial run to prove programmed instructions</li><li>Ensures first article and first piece submissions are correct by working with quality team</li><li>Assist with development of senior operators and setup technicians</li></ul>Requirements<ul><li>Minimum of three years of CNC programming experience</li><li>Must be able to lift 50 pounds.</li><li>High school diploma or equivalent.</li><li>Basic math skills.</li></ul>Benefits<ul><li>Medical – IBC</li><li>Dental – The Standard Insurance Company</li><li>Vision – IBC – included in medical premium</li><li>Company Paid Life Insurance – The Standard Insurance Company</li><li>Group Additional Life and AD&amp;D Insurance-The Standard</li><li>Group Short and Long Term Disability Insurance- The Standard</li><li>401 (k) w/ match – Aon (VOYA) (90 Days after full-time hire)</li><li>Paid Time Off (PTO)</li><li>10 Company Paid Holidays</li><li>Complimentary breakfast and lunch everyday for all employees</li></ul>Gwynedd Manufacturing is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties and responsibilities. Management reserves the right to assign or reassign duties to this job at any time.Job Type: Full-time &nbsp;Pay: $33.00 - $45.00 per hour

CNC Swiss Lathe Programmer

Great opportunity at a growing defense contractor with a state-of-the-art manufacturing facility.&nbsp;✔️ Paying $50+ per hour depending on experience 💲 💰 &nbsp;✔️ "Develop, implement, and sustain machining and inspection processes that support our manufacturing operations."✔️ Complimentary breakfast and lunch everyday for all employees✔️ Fantastic benefits!✔️ There is plenty of growth opportunity at this shop 🚀 📈Apply now to explore further!---Gwynedd Manufacturing, a growing defense contractor located in North Wales, PA, is a state-of-the-art manufacturing facility dedicated to producing quality products for the U.S. Department of Defense and various U.S. Federal Law Enforcement Agencies. As an innovative company offering a wide array of products, we strive to continuously develop new technology and drive process improvement.The Manufacturing Engineer helps to develop, implement, and sustain machining and inspection processes that support our manufacturing operations. They will be engaged in all phases of the manufacturing effort from process design to the execution of the parts on the shop floor.<ul><li>Accountable for the manufacturing processes that deliver to the Business Plan. Machining, measurement, tooling, fixtures and CNC programs should be robust and designed to deliver Right First Time results and Product Flow to support best-in-industry manufacturing</li><li>Support capability acquisition and technology insertion necessary for product development and improvement in a very dynamic and competitive industry</li><li>Work closely with Design Engineering to evaluate and improve the manufacturability of products in the research and development stage as well as in mature production</li><li>Use engineering and manufacturing experience with independent judgment to evaluate, troubleshoot the machining process to improve tooling life, programming, and cycle time</li><li>Lead cross-functional teams to continuously improve processes and products</li><li>Communicate simply and effectively across all levels of the organization</li><li>Train machine operators on standard operating procedures and work instructions</li><li>Frequent work on the shop floor to execute new program and setups</li><li>Conventional machine shop experience along with 3 to 5 years of 4-5 axis CNC programming, insert tooling and machine tool operation experience</li><li>Knowledge of a wide range of manufacturing process types and applications</li><li>Ability to read and interpret blueprints. Knowledge of GD&amp;T use</li><li>Work holding selection and fixture design</li><li>Prepare work instructions and shop routers</li><li>Excellent interpersonal and teamwork skills</li><li>Ability to work independently in a fast-paced environment</li></ul>Requirements<ul><li>Experience using FeatureCAM, OptiCAM, PartMaker, PowerMill or NX</li><li>Ability to use all common inspection tools and gages</li><li>Basic ISO 9001 knowledge and understanding</li><li>Editing of CNC programs at the G and M Code level</li><li>BS in Engineering preferred</li><li>Local candidates only</li></ul>Gwynedd Manufacturing is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties and responsibilities. Management reserves the right to assign or reassign duties to this job at any time.Benefits<ul><li>Medical – IBC</li><li>Dental – The Standard Insurance Company</li><li>Vision – IBC – included in medical premium</li><li>Company Paid Life Insurance – The Standard Insurance Company</li><li>Group Additional Life and AD&amp;D Insurance-The Standard</li><li>Group Short and Long Term Disability Insurance- The Standard</li><li>401 (k) w/ match – Aon (VOYA) (90 Days after full-time hire)</li><li>Paid Time Off (PTO)</li><li>10 Company Paid Holidays</li><li>Complimentary breakfast and lunch everyday for all employees</li></ul>

3 Gwynedd Manufacturing Jobs