field_job_employment_type

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

field_job_salary_range

Full Time&nbsp;HourlySalary Range:$20.00 To $30.00 HourlyJob purposeTo setup and run the Sodick Wire EDMs all the while maintaining part quality and production efficiencies. &nbsp;&nbsp;Duties and responsibilities<ul><li>Setup, operate and debug Sodick Wire EDMs.</li><li>Make machine tool offsets as needed to maintain part quality.</li><li>Make minor program changes to M &amp; G code as needed.</li><li>Identifies signs of tool wear and then makes the appropriate process or tool change(s).</li><li>Reads process sheets and mechanical drawings with the understanding of GD&amp;T.</li><li>Works on multiple machines and performs multiple tasks throughout the day.</li><li>Uses general measuring instruments such as; indicators, micrometers, calipers, optical comparators, gage blocks, rules, protractor and height gages.</li><li>Enters inspection data into a computer software program.</li><li>Performs basic machine maintenance such as changing fluids and filters.</li><li>Maintains a clean work environment and machine work area.</li><li>Follows company written policy and documented procedures.</li><li>Performs other duties as assigned.</li></ul>Qualifications<ul><li>Minimum 3-5 years of experience setting up and running EDMs or minimum 3-5 years of experience setting up and running CNC Lathes and Mills or Technical Training College with the focus of study being CNC setups and operation.</li><li>Ability to read blue prints and knowledge of GD&amp;T a must.</li><li>Knowledge of&nbsp;Esprit programs with understanding of cutting parameters.</li><li>An understanding of both the Metric and English measuring systems a must.</li><li>Ability to use a variety of measuring equipment.</li><li>High School Diploma or Technical Training Certificate.</li></ul>Working conditions<ul><li>Working in production environment.</li><li>Required exposure to industrial oils, coolants, solvents, lubricants, adhesive and other chemicals. &nbsp; NOTE: &nbsp;All safety precautions will be used.</li><li>Requirement for some independent actions and/or decisions is expected.</li><li>Required to work in a non-air-conditioned setting.</li><li>Some repetitive motion required on occasion.</li></ul>Physical requirements• Required daily: periodic lifting of materials and parts weighing up to 70 lbs.• Required intermittent long periods sitting and standing.Arnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. &nbsp;Minority/Female/Sexual Orientation/General Identity/Disability/Veteran#ROC

Arnold Magnetic Technologies

Machine Operator (A shift and B shift available)

Full Time&nbsp;HourlySalary Range:$25.00 To $35.00 HourlyJob purposeThe primary responsibilities are to setup and run Multi-Axis CNC Lathes with live tooling, CNC Mills all the while maintaining production efficiencies and part qualityDuties and responsibilities<ul><li>&nbsp; &nbsp; &nbsp;Setup, operate and debug CNC Lathes and Mill.</li><li> &nbsp; &nbsp; Make machine tool offsets as needed to maintain part quality.</li><li> &nbsp; &nbsp; Make minor program changes to NC code as needed.</li><li> &nbsp; &nbsp; Identifies signs of tool wear and then makes the appropriate process or tool change(s).&nbsp;</li><li> &nbsp; &nbsp; Reads process sheets and mechanical drawings with the understanding of GD&amp;T.</li><li> &nbsp; &nbsp; Works on multiple machines and performs multiple tasks throughout the day.</li><li> &nbsp; &nbsp; Uses general measuring instruments such as; indicators, micrometers, calipers, optical comparators, gage blocks, rules, protractor and height gages.</li><li> &nbsp; &nbsp; Enters inspection data into a computer software program.</li><li> &nbsp; &nbsp; Performs basic machine maintenance such as changing fluids and filters.</li><li> &nbsp; &nbsp; Maintains a clean work environment and machine work area.</li><li> &nbsp; &nbsp; Follows company written policy and documented procedures.</li><li> &nbsp; &nbsp; Other duties as assigned.</li></ul>Qualifications<ul><li>High School Diploma or Technical Training Certificate</li><li>Minimum 3-5 years of experience setting up and running CNC Lathes and Mills.</li><li>Technical Training College with the focus of study being CNC setups and operation or similar Apprentice training.</li><li>Ability to read blue prints and knowledge of GD&amp;T a must.</li><li>An understanding of both the Metric and English measuring systems a must.</li><li>Ability to use a variety of measuring equipment.</li><li>Basic computer knowledge along with Microsoft Office</li><li>Knowledge of cutting tools and exotic materials/high temp. alloys.</li><li>Ability to write and edit NC programs with understanding of cutting parameters.</li><li>Proficient with computer and Microsoft Office.</li><li>Knowledge of Mori Seiki, MAPPS-4, Mazak, Mazatrol, and Mastercam a plus.</li><li>Strong communication skills.</li></ul>&nbsp;Working conditions<ul><li>Generally working in production environment.</li><li>Required exposure to industrial oils, coolants, solvents, lubricants, adhesive and other chemicals. &nbsp;NOTE: &nbsp; All safety precautions will be used.</li><li>Requirement for some independent actions and/or decisions is expected.</li><li>Some repetitive motion required on occasion.</li></ul>&nbsp;Physical requirements<ul><li>Required daily: periodic lifting of materials and parts weighing up to 70 lbs.</li><li>Required intermittent long periods sitting and standing.</li></ul>BENEFITS INCLUDE<ul><li>Medical, Dental &amp; Vision</li><li>Company Paid Life Insurance</li><li>Short- and Long-Term Disability</li><li>Company Contributions to HSA &amp; HRA</li><li>401k Company Match 100% up to 4%</li><li>Workplace Wellness Programs</li><li>Paid Time Off (including 14 Company Paid Holidays)</li><li>Work hours: Monday through Thursday, 5:30 am - 3:00 pm, Friday, 5:30 &nbsp;am - 9:30 am</li></ul>#ROCArnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. &nbsp;Minority/Female/Sexual Orientation/General Identity/Disability/Veteran&nbsp;

CNC Programmer

Full Time&nbsp;HourlySalary Range: $25.00 To $35.00 HourlyJob purpose&nbsp;Individual will be responsible for producing, modifying and repairing tools used in the manufacturing process. Must have 10+ years of experience reading prints and using mills, lathe, surface grinders and other standard tool room machines to make parts to print. Must have good attention to detail and accustom to working and measuring to close tolerance and delicate parts. Responsible for maintaining work quality and doing in process inspection.&nbsp;Essential Duties<ul><li>Assembling, fitting and repairing tools</li><li>Following engineering drawings, including interpreting GD&amp;T</li><li>Using 2D and 3D computer aided design and manufacturing software (CAD/CAM)</li><li>Assisting with tool maintenance</li><li>Teach basic machine operation to floor operators as required</li><li>Give experienced input to tooling designs for better manufacturability</li><li>Complete production operations requiring tool room machines</li><li>Other tasks not listed here that arise from an ever-growing environment</li><li>Other duties as assigned</li></ul>Key ResponsibilitiesMake tools to engineer partsAssemble and debug prototype toolsReadily assist production and engineer as requiredMinimum Qualifications<ul><li>Education: High school diploma or GED/Technical Training Certificate/Equivalent experience.</li><li>Work experience: Journeyman Tool &amp; Die Maker or equivalent with 5+ years of experience. </li><li>Ability to read engineering prints with high understanding of GD&amp; T</li><li>High competency using micrometers, indicators, calipers, etc.</li><li>Requires intermittent long periods of standing and/or walking</li><li>Periodic lifting of materials not to exceed 40 pounds</li><li>Willing to work beyond normal hours if needed</li><li>Subject to stressful situations</li><li>An understanding of both Metric and English measuring systems</li><li>Ability to write and edit programs with understanding of cutting parameters</li><li>Ability to use Manual Knee Mill, Manual Lathe, Grinder, Machine Tools, Inspection and measuring instruments such as micrometers, calipers, and indicators and power hand tools</li></ul>Physical Demands and Work Environment<ul><li>Standard work week is Monday through Friday, hours to be consistent with business unit; some off hours work expected</li><li>Generally working in Office with some activities in production environment.</li><li>Repetitive motion</li><li>Some day or overnight travel domestically could be required.</li></ul>

3 Jobs in Rochester, NY, USA