field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

field_job_salary_range

Would you consider moving to a beautiful part of the country? Excellent cost of living. Great hunting, fishing, boating, skiing, snowmobiling etc... Mount Mfg is located in beautiful Marquette, MI. They are looking for a “CNC Swiss-Lathe Setup Machinist” for the afternoon shift. -----Job Title: CNC Swiss-Lathe Setup Machinist - Afternoon ShiftDepartment: OperationsReports to: CNC Turning ManagerSchedule: 3:30pm – 11:30pm, Monday - FridayCompany: Mount Mfg is an orthopedic contract manufacturing company located in Marquette, MI. The company operates with a quality system that is ISO 13485:2016 certified and FDA registered.Job Responsibilities:<ul><li>Setup, trouble-shoot and operate CNC Swiss Lathes (sliding headstock) including tooling installation, offsets, work-holding, coolant lines (high and low pressure), and understand and perform all conventional methods of swiss machining</li><li>Perform minor program adjustments as needed when approved by manager (i.e. deburring passes, order of operation, speed &amp; feed adjustments, etc)</li><li>Perform and document in-process inspection utilizing good documentation practices</li><li>Assist co-workers in the troubleshooting of CNC machining issues</li><li>Ability to read and interpret prints and GD&amp;T per ASME Y14.5</li><li>Attend Pre-production Meetings as needed</li><li>Must have social skills to adequately operate in a team environment and maintain a positive company culture</li><li>Act as a leader and mentor to new operators learning CNC machining</li><li>Other duties as assigned</li></ul>Experience/Education: High School Diploma, and 5+ years experience in a relevant manufacturing environment with minimum 2 years of swiss-lathe setup experienceExperience with 21 CFR Part 820 and ISO 13485:2016 preferred but not requiredKnowledge of common manufacturing processes such as CNC milling, CNC turning, blast finishing, laser marking, cleaning, passivation, anodization, heat treatment, forming, etc. preferred but not required.Travel Requirements: Minimal. Occasional technical training workshopsJob Type: Full-timePay: $26.00 - $35.00 per hourBenefits:<ul><li>401(k)</li><li>401(k) matching</li><li>Dental insurance</li><li>Flexible schedule</li><li>Health insurance</li><li>Health savings account</li><li>Life insurance</li><li>Paid time off</li><li>Vision insurance</li></ul>Schedule:<ul><li>8 hour shift</li><li>Day shift</li><li>Monday to Friday</li></ul>Education:<ul><li>High school or equivalent (Required)</li></ul>Experience:<ul><li>Swiss-lathe setup: 2 years (Required)</li><li>CNC Machining: 3 years (Required)</li></ul>Work Location: In person

CNC Swiss Setup Machinist in Marquette, MI - Relocation $ Provided

Want to join a Modern Machine Shop Top Shop and help us disrupt the manufacturing industry by advancing the future of flight? If so, apply today to join our team!&nbsp;What You’ll Do<ul><li>Use Mastercam to develop CNC programs for aircraft and space engine hardware, continuously improving upon existing processes and updating programs accordingly</li><li>Define and maintain manufacturing processes by studying customer blueprints and testing manufacturing methods, tooling, and equipment</li><li>Utilize Solidworks to lead the design of work-holding and tooling to support production schedules.&nbsp;</li><li>Responsible for the design and development of work holding, custom tooling, and gauging to meet customer inspection specifications</li><li>Support the production floor by troubleshooting problems and implementing solutions to keep machines running conforming parts</li><li>Drive continuous improvement and cost reduction opportunities in machining processes by leveraging new cutting and automation tools with external vendors</li><li>Manage tooling being returned from completed jobs (evaluate condition, sharpen as needed, and put away in vending solution, etc.)</li><li>Maintain tool set up sheets, record programming changes, and sustain appropriate engineering paperwork</li></ul>What We Are Looking For &nbsp;<ul><li>Bachelor's or Associates Degree in Mechanical or Industrial Engineering or equivalent preferred</li><li>Minimum of 4 years of CNC programming in a machine shop required</li><li>Strong proficiency in GD&amp;T per ASME Y14.5M</li><li>Experience with Mastercam 2023/2024, certification a plus</li><li>Proficiency with Siemens and/or Fanuc controllers, DMG Mori machine tool experience is preferred</li></ul>Why Northeast Tool? &nbsp;<ul><li>Competitive pay&nbsp;</li><li>Medical, dental, vision, and life insurance&nbsp;</li><li>Company Matched 401K (Roth and Traditional)&nbsp;</li><li>Challenging and rewarding career</li><li>Family, team-focused working environment&nbsp;</li></ul>We believe the only way our company can grow is when we nurture the growth of our employees. We are committed to working hard, having fun, and making an impact in our community. Sound too good to be true? Apply today to join our team.&nbsp;

Northeast Tool & Manufacturing

Rethinking Precision Manufacturing

Manufacturing Excellence 

Multi-Axis Turning Applications

$100k - $140K CNC Programmer in Charlotte NC - Relocation $ Provided

Exciting opportunity to work for a reputable company in the racing industry, located in beautiful Mooresville, NC. This is a true machinist role - prove out program, operate, and QC parts.Top of the line Mazak equipment.&nbsp;-----The CNC Multi-Axis Machinist will produce machined parts by setting up and operating 4 and 5-axis CNC machine tools. &nbsp;Responsibilities:&nbsp;<ul><li>Manufacture parts with 4 and 5-axis CNC machines by using industry standard machining techniques and practices while adhering to quality assurance procedures and processes.</li><li>Plan machining from work schedules and engineering drawings and CAD. &nbsp;</li><li>Work independently or with other Machine Shop staff to determine work holding, tool holding, and tools required for jobs.</li><li>Anticipate tooling and material needs, check inventory, and place orders with supervisor as needed.</li><li>Directly program using Mazatrol or load CAM program to CNC machines.</li><li>Manufacture parts using conventional machining equipment (manual machines, saws, etc.) and other CNC equipment as required.</li><li>Maintain and update manufacturing information as per company directive.</li><li>Maintain safe operations in compliance with safety procedures and regulations.</li><li>Maintain equipment by completing preventative maintenance requirements following manufacturer’s instructions and standards set forth by management. &nbsp;When necessary, repair machines and equipment and test operation of unit to ensure functionality and performance. &nbsp;</li><li>Use effective oral and written communication to include proper programming, set-up sheets and suggestions for improvement.</li><li>Accomplish organizational goals by accepting ownership and personal accountability for job done.</li><li>Responsible for keeping equipment and work area clean and orderly according to company standards.</li><li>Arrive on time for scheduled work, work overtime and weekends as necessary.</li><li>Be dependable and professional, act with integrity, work effectively with others, take initiative, and be willing to apply new knowledge and skills.</li><li>Other duties as assigned.&nbsp;</li></ul>Qualifications: &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;<ul><li>High school machining program and / or post-secondary technical school with earned diploma, certificate, or degree in machining trade training preferred.</li><li>5 years minimum experience operating 4 and 5-axis CNC machining centers and mill-turn machines. &nbsp;Mazak Mazatrol experience is a plus.</li><li>Must be able to work independently and possess strong CNC setup, operating, and machine G-coding abilities.</li><li>Experienced with precision measuring instruments, both digital and analog.</li><li>Can read and understand drawings and specifications with above average understanding of geometric tolerancing and dimensioning (GD&amp;T).</li><li>Knowledge of work holding, tool holding, and tooling equipment used in CNC working environment.</li><li>Must possess above average math skills.</li><li>Must possess basic computer skills.</li><li>Must be able to lift 50 lbs.</li><li>Must be able to adapt to frequent change, delays or unexpected events with a positive and constructive attitude.</li><li>Must be willing and able to work flexible hours due to changing work schedules and demands.</li><li>Must possess strong English communication skills (oral and written) as it relates to the job.</li><li>Must be able to produce parts to deadlines, accurate to the print and with a quality finish.</li></ul>

CNC Multi-Axis Machinist in North Carolina - Relocation $ Provided

Job Title CNC Programmer/Machinist Fabrication Technician About Canoo Canoo's mission is to bring EVs to Everyone and build a world-class team to deploy this sustainable mobility revolution. We have developed breakthrough electric vehicles that are reinventing the automotive landscape with pioneering technologies, award-winning designs, and a unique business model that spans all owners in the full lifecycle of the vehicle. Canoo is starting production and is distinguished by its pioneering and experienced team of technologists, engineers, and designers. With offices around the country, the company is scaling quickly and seeking candidates who love to challenge themselves, are motivated by purpose, and possess a strong desire to get things done. The "Canoo Way" Canoo's success is the direct result of our disciplined application of our core operating principles and drills, which are based on three main principles: Think 80/20 ("Important versus less important"), Act 30/30 ("Reduce waste and increase output"), and Live 90/10 ("We have each other's back"). We hire based on "MET" - Mindset, Equipment and willingness to Train - and seek individuals that take accountability and deliver results being Humble, Hungry to succeed, and Hunting for opportunities to win. We train our team to engage with each other by modulating between their intellect (iQ) and emotional intelligence (eQ) applying Facts, Finesse, and Force when they communicate. The principles and drills of the CANOO Way have been fundamental to our success, our ability to grow, continuously improve, innovate and are at the core of our day-to-day operations. Job Purpose Canoo is searching for a qualified CNC Programmer/Machinist Fabrication Technician to support Maintenance, Facilities, and Production teams. As a Fabrication Technician, you will weld, machine, turn parts on a lathe, CNC programming, assemble and fabricate assemblies/equipment, and repair/fabricate production equipment. Welding and experience working with machining equipment are needed. Able to create or work off of blueprint diagrams. All work is performed in accordance with established safety procedures and ensures compliance with engineering specifications and/or codes. Responsibilities (80s of the Position) <ul><li>Utilize skills in: welding (MIG), lathe turning, Mill (CNC), drill press, press brake, assembly and fabrication skills to support various projects within Canoo Maintenance Team and Manufacturing.</li><li>CNC Programming Mastercam and AutoCAD procedures/processes</li><li>Follow established safety procedures according to OSHA standards and company procedures.</li><li>Assess, analyze and estimate (time, effort and materials required) fabrication projects as needed.</li><li>Support Canoo Maintenance and Facilities team members and Production Team members in the execution of their job requirements.</li><li>Perform repair work including necessary disassembly and re-assembly of production equipment.</li><li>Coordinate efforts with Maintenance, Facilities, Production and Other Departments as needed.</li><li>Support equipment PM tasks per manufacturer recommended specifications.</li><li>Support troubleshooting intermittent/inconsistent mechanical failures on production equipment.</li><li>Identify best practices and create standards combining available information &amp; knowledge.</li><li>Follow plant safety and environmental policies and keep work areas clean and orderly.</li><li>Participates in regularly scheduled team meetings.</li><li>All other duties as required to support business needs.</li></ul> Required Experience <ul><li>Strong background in some or all the following: (required) <ul><li>Welding (MIG), machining (lathe, mills, drills, etc.), brakes and mechanical assembly experience.</li></ul></li><li>CNC Programming and AutoCAD Experience</li><li>High School Diploma or GED equivalent and at least 18 years or older</li><li>Must be able to communicate effectively with supervision and other personnel with the ability to create clear technical instructions.</li><li>Basic computer skills required (i.e., Microsoft Office Suite)</li><li>Able to function and work in a fast-paced manufacturing environment.</li><li>Demonstrate self-initiative and mechanical proficiency, leadership ability, and teamwork.</li><li>A willingness to work on alternate shifts and must demonstrate the ability to adapt to changes.</li><li>Be flexible to training, coaching, projects, and travel as needed.</li><li>Satisfactorily complete the Canoo hiring process requirements which include comprehensive assessments and background check.</li></ul>Preferred Experience <ul><li>Strong knowledge of pneumatics, hydraulics, print-reading, and mechanics.</li><li>Previous experience in Body, Paint, or Assembly in automotive or manufacturing environment</li><li>Background with Industrial Maintenance</li></ul>Travel Requirements <ul><li>Travel and/or overtime may be required.</li></ul>Physical Requirements for Physical Positions While performing the duties of this job, employees may be required to lift up to 25 or more pounds, stand, sit, bend/stoop, or operate office equipment or machinery. Reasonable Accommodations Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the position. What's Cool About Working Here... <ul><li>Meaningful, challenging work that will redefine automotive landscape and make EVs available to everyone </li><li>Comprehensive Health Insurance </li><li>Equity Compensation </li><li>Flexible Paid Time Off </li><li>Casual workplace with an unbelievable feeling of energy </li></ul>Canoo is an equal opportunity-affirmative action employer and considers all qualified applicants for employment based on business needs, job requirements and individual qualifications, without regard to race, color, religion, sex, age, disability, sexual orientation, gender identity or expression, marital status, past or present military service or any other status protected by the laws or regulations in the locations where we operate. We also consider qualified applicants with criminal histories consistent with applicable federal, state and local law. Any unsolicited resumes or candidate profiles submitted in response to our job posting shall be considered the property of Canoo Inc. and its subsidiaries and are not subject to payment of referral or placement fees if any such candidate is later hired by Canoo unless you have a signed written agreement in place with us which covers the applicable job posting. Canoo maintains compliance with the OFCCP. As such, please feel free to review the following information: <a href="https://www.dol.gov/agencies/ofccp/posters" target="_blank">https://www.dol.gov/agencies/ofccp/posters</a> <a href="https://www.dol.gov/agencies/olms/poster/labor-rights-federal-contractors" target="_blank">https://www.dol.gov/agencies/olms/poster/labor-rights-federal-contracto…</a> If you are a person with a disability needing assistance with the application process, please call (214) 529-8055 or email us at <a href="mailto:TalentAcquisition@canoo.com" target="_blank">TalentAcquisition@canoo.com</a> Equal Employment Opportunity Posters Equal Employment Opportunity Posters | U.S. Department of Labor (dol.gov) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

CNC Programmer/Machinist Fabrication Technician

This shift will be Monday thru Thursday 9pm to 7am. Come join our team! We offer a fast paced exciting environment. We are committed to employing only motivated, quality-minded individuals focused on solutions and success. We are a dynamic &amp; growing manufacturer in the Aerospace industry. CNC Machinist • 5 axis router • Using hand tools, drills, calipers, heat guns, Drimel tool, die grinders, protractors, micrometers, height gages, bench center, dial indicators, blind rivet guns, torque wrenches, flare tool, nutsert installation tools and bore gauges/bore rings • Use work orders, drawings and/or schematics to determine specifications, such as materials to be used, dimensions and tolerances • Set up, operate and tend machines • Set controls to regulate machining, or enter commands to retrieve, input, or edit computerized machine control media for problems encountered during operation • Measure and examine completed work pieces to verify conformance to specifications using Numerex CMM, Optical Comparator, Brown &amp; Sharpe CMM and Precitech • Load work pieces into machines manually or with hoists and cranes • Start machines, monitor operations and record operational data • Test and adjust machine speeds and actions, according to product specifications • Watching gauges, dials, or other indicators to make sure a machine is working properly • Listen to machines during operation in order to detect sounds such as those made by dull cutting tools or excessive vibration and adjust machines to compensate for problems • Perform weekly checklist • Clock in and out of bar codes to begin and complete work orders. Requirements Education and/or Experience: High School Diploma or Equivalent Job Knowledge, Skills and Abilities: The ability to read, and interpret English documents such as safety rules, operating and maintenance instructions, procedure manuals and reports, drawings and schematics Ability to write and/or type routine correspondence or reports. The ability to perform simple shop math including use of decimals, addition, subtraction, multiplication and division in all units of measure. The ability to apply commonsense understanding to carry out written or oral instructions. Physical Demands: Ability to move molds and parts from 60" shelf to rack of machine. Ability to stand in place to assemble parts with hand tools and power tools. Ability to stand in place to assemble parts with hand tools and power tools. Ability to carry power tools and parts to compete assembly. Ability to move parts from 36" table to 36" tub. Ability to squat or kneel to place parts in tubs and retrieve. Ability to grasp hand tools, power tools and caulking guns and hold grip for 30 seconds.

Night Shift CNC Machinist

Job Details Job Location Pryer Aerospace Tulsa - Tulsa, OK Description PRYER Aerospace is hiring for a Full Time Experienced CNC Operator for the 2nd Shift. PRYER Aerospace is a leading provider of structural components, assemblies and kits to the aerospace industry. We specialize in the fabrication of complex sheet metal and machined components for commercial, corporate and military aircraft. SIGNING BONUS AVAILABLE! POSITION SUMMARY: Utilize computerized numerical control machining skills efficiency to meet customer requirements. <ul><li>Sets up and operates 3, 4 &amp; 5 Axis CNC milling machine to mill surfaces of metallic and nonmetallic work pieces. </li><li>Compares numerical data display with specifications on operations sheet. </li><li>Reads, interprets and edits G-Code for offset change. </li><li>Periodically verifies the conformity of the parts being machined to the specification in the router packet. </li><li>Adjusts program parameters to allow for variation in tool edge, material hardness, and other factors affecting the effective performance of the milling center. </li><li>Grinds, deburrs and polishes parts to achieve smooth finished edges and surfaces, and then clear out the interior surfaces of all holes. </li><li>Performs basic day to day maintenance of machine, including checking &amp; filling coolant and cleaning machine.</li><li>Provides feedback for product improvements for quality and cost as part on ongoing learning process of operations. </li><li>Exhibits a High Quality Control Standard - First Piece Quality or Zero Scrap Mentality. </li><li>Support the company and department business goals and objectives for Quality, Cost, Delivery, Safety and Attitude (QCDSA).</li></ul>Qualifications EDUCATION: High School diploma or equivalent. EXPERIENCE: <ul><li>Minimum 5 years CNC experience in a manufacturing environment</li><li>Ability to read, interpret and edit G Code. </li><li>Must be able to set up machines with no supervision</li><li>Experience in editing programs. Ability to calculate figures and amounts such as proportions, percentages, area, circumference and volume. Ability to apply concepts of basic algebra and geometry. </li><li>Must have own tools. </li><li>High proficiency @ Blue Print Reading, GD&amp;T, Inspection Tools &amp; Methods. </li><li>Experience with Aerospace materials, tolerances and quality requirements beneficial. </li><li>Familiarity with forklift operations beneficial; ability to successfully pass a forklift operations test. </li><li>Basic Quality procedures / ISO</li></ul> COMPUTER SKILLS: Basic computer skills. Pryer Aerospace is committed to providing a benefits package that strives to meet the needs of its employees and their dependents. Employees receive excellent compensation and benefits with medical, dental and vision, 401(k), paid vacation and holidays. Pryer Aerospace is proud to be an equal opportunity employer Male/Female/Disabled/Veteran

CNC Machinist

Looking for a CNC Laser Operator to must perform typical laser cutting operations, select proper cutting programs and proper fixtures. Establish proper stop location and adjust laser beam focal point. Requirements <ul><li>CNC Operator &amp; Laser cutting experience </li><li>Ability to make proper set-ups for cutting operation and perform prescribed maintenance as required.</li><li>Perform dimensional inspections and detect along with report defective material or questionable conditions to supervisor.</li><li>May need to perform a variety of other tasks as production needs require.</li><li>Knowledge of computers and the ability to navigate windows program.</li><li>Ability to read thickness of gauge for steel as well.</li><li>Know the difference in stainless steel and galvanized metal.</li><li>Forklift experience. </li><li>Read a tape measure </li></ul>Apply at tpistaffingservice.com or 215 N 3rd St Ponca City, OK 74601.

CNC Laser Operator

Job Type Full-time Description GasTech has been dedicated to helping energy clients around the globe achieve their goals for more than 30 years. As an oil and gas engineered-to-order business, we are committed to understanding each client's specific goals and executing them as our own. Things are exciting for us at GasTech, as we are growing and looking for an experienced CNC Profiling Operator to join our team! Our workplace culture is both friendly and dynamic, and in this role, you will have plenty of opportunities to interact with all members of our project teams. Key Contributions: Responsibilities include, but are not limited to, the following: <ul><li>Set up and operate CNC machines to fabricate parts according to specifications </li><li>Read and interpret blueprints, engineering drawings, and job orders with a reasonable rate of proficiency and accuracy. </li><li>Keep the work area clean and orderly and report potential hazards.</li><li>Perform routine maintenance on machines to keep them in good working condition.</li><li>Assist in other areas of the facility as needed; other duties as assigned.</li></ul> WORKING ENVIRONMENT: This position is a manufacturing role with most of the work performed in our shop, which is a heavy construction and fabrication environment. Must be able to withstand prolonged periods of standing and walking. Must be physically able to climb ladders, bend, stoop, squat, and crawl into awkward spaces. Must be able to lift 50 pounds without assistance. If the following sounds like you, we suspect you will personally enjoy and professionally thrive in this role: <ul><li>Be paid for your unique and valuable contributions! We offer competitive pay and a company-wide bonus program. Each quarter, we may meet and/or exceed our company's financial goals. If we succeed as a team, we're rewarded as a team. Everyone is eligible, from our shop staff to our team leadership, because without everyone working together, we wouldn't accomplish our goals. That's how we approach our work. </li><li>This position will report to our Manufacturing Manager. You will have a seasoned leader who is eager to partner with you and who will advocate for your ideas, requests, and professional development and success.</li><li>You have well-developed communication skills that allow you to build strong rapport and trust with everyone, from all diverse backgrounds and experiences.</li><li>As a GasTech employee, you will enjoy autonomy while still being part of our team. Because you are resourceful, show initiative, take ownership of your work, and are eager to make valuable contributions to our projects, we will champion your expertise and not micro-manage you </li></ul> Company Benefits: <ul><li>Company-wide Bonus Program</li><li>401k Plan w/ 4% match</li><li>Medical, dental, and vision insurance</li><li>FSA (Flexible Spending Account)</li><li>Voluntary Life Insurance</li><li>Voluntary STD</li><li>Employer Paid Group Term Life and LTD</li><li>Company PTO Program &amp; 8 Paid Holiday</li></ul>Requirements <ul><li>A minimum of 3 years of experience in a manufacturing environment with 2 years of experience as a CNC Operator or similar role. </li><li>Experience operating CNC-controlled burning equipment such as a pipe/vessel profiler or burn tables such as HGG, Vernon, or ESAB is strongly preferred but not required. </li><li>Experience with HGG profiler equipment is strongly preferred but not required.</li><li>Experience working with Carbon and Stainless Steel cutting using Oxy-Fuel and Plasma cutting processes is strongly preferred but not required.</li><li>Previous experience with forklift and crane operation to prepare and load raw materials and parts onto the machine is preferred but not required. </li><li>Demonstrable knowledge of ASME code pressure vessel and piping dimensional tolerances is strongly preferred but not required. </li><li>Must have strong computer skills with a basic understanding of basic HMI (Human-Machine Interface).</li><li>Must possess a strong technical aptitude and require basic reading, writing, and mathematical skills. </li><li>Must possess the ability to use measuring instruments such as calipers, levels, and tape measures to ensure the accuracy of dimensions.</li><li>Must possess the ability to follow all safety protocols and guidelines while operating machinery, hand tools, and power tools, including grinders, pry bars, etc., and comply with all safety and environmental policies.</li><li>Must be able to continuously use all required PPE throughout the assigned work shift. </li><li>Must possess the ability to monitor machine operations to detect any malfunctions or issues, and to adjust machine settings as needed to maintain quality and productivity.</li><li>Must possess the ability to walk, stand, stoop, kneel, bend at the waist, and reach for extended periods daily and can lift and/or carry objects weighing up to 50 lbs. without assistance.</li><li>Must possess the ability to work in a team environment with regular and predictable attendance.</li><li>Must be able to tolerate exposure to a manufacturing environment and extreme weather conditions.</li></ul>

CNC Profiling Operator

TAT-Limco is recognized as a world leader in the Aerospace Industry. As the premier choice for Heat Transfer manufacturing and MRO, TAT-Limco provides high-value alternatives to Commercial, Regional, and Rotary Aircraft customers worldwide. TAT-Limco is also a premier in the Defense Industry. As the preferred choice for Heat Transfer new manufacturing and MRO, TAT-Limco affords the best-value solutions for our Military customers globally. TAT Limco on Tulsa, OK has an opening for a CNV+C Machinist who will be responsible for setting up and running CNC equipment to machine or fabricate a variety of precision parts and components to specifications by following drawings, work instructions and in-process inspection requirements. This position will set up and operate all types of machines: Grinders, Lathes, Mills, and related equipment in the manufacture, rework, and repair of aircraft parts and components. Requirements <ul> <li>Operate various CNC equipment such as CNC lathes, milling and drilling machines, etc. to machine or fabricate components for final assembly</li> <li>Set up, adjust, and operate machine tools and many specialized or advanced variation tools to perform precision machining operations</li> <li>Mount, align and secure work holding, cutting tools, attachments, accessories, and materials onto machines</li> <li>Load parts and cycle machine to ensure optimal efficiency and conformance</li> <li>Measure and inspect part features per drawing to ensure conformance and detect defects using precision instruments using basic gaging and inspection tools (i.e. Dial Calipers, Gage Pins, Micrometers)</li> <li>Record information or data describing work performed or defects found</li> <li>Complete assigned work within given timeframe efficiently and according to specifications and complete all documentation</li> <li>Follow all safety policies and procedures, including required PPE for the respective job being performed</li> <li>Additional duties as assigned</li></ul>Requirements <ul> <li>High School education or equivalent </li> <li>Machining / Manufacturing experience required and Aerospace experience a plus</li> <li>10 years experience programming and running multi-axis (4 point) CNC machines desired</li> <li>Displays good judgement - quality &amp; safety. Ability to learn and apply new skills. Responsible for both the success of the individual and the team</li> <li>Maintain work areas and equipment in a clean and orderly condition</li> <li>Working knowledge and ability to do industrial math calculations and work to tight tolerances</li> <li>Maintain established standards of quality, productivity &amp; attendance</li> <li>Must follow all safety rules and regulations</li> <li>Ability to lift up to 50 pounds</li> </ul> Benefits TAT Technologies Group is dedicated to providing an inclusive, fun, and unique workplace. We believe in acknowledging and appreciating the value of our team members. One way we value our team is by providing a comprehensive and expansive benefits offering to include Major Medical, Dental, Vision, Life, 401K with company matching, STD, LTD, accidental coverages, EAP, and more. Insurance carriers vary based on location. Equal Employment Opportunities - TAT TECHNOLOGIES is committed to maintaining a supportive, healthy, and productive work environment free from discrimination, harassment, or bullying, and complying with all legislative requirements. This includes equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran

CNC Machinist (Aerospace/Aviation)

Job Details Job Location Pryer Aerospace Claremore - Claremore, OK Position Type Full Time Job Category Manufacturing PRYER Aerospace is hiring for a Full Time CNC Machinist for 1st Shift Monday-Thursday (12 hour shift) and willing to work overtime as required. PRYER Aerospace is a leading provider of structural components, assemblies and kits to the aerospace industry. We specialize in the fabrication of complex sheet metal and machined components for commercial, corporate and military aircraft. Ask about our $2,500 Signing Bonus!! POSITION SUMMARY: Utilize computerized numerical control machining skills efficiently to support customer requirements. ESSENTIAL FUNCTIONS: <ul><li>Set up and operate 3, 4 &amp; 5 Axis CNC milling machine to mill surfaces of metallic and nonmetallic work pieces. Compare numerical data display with specifications on operations sheet.</li><li>Read, interpret and edit G-Code for offset change.</li><li>Periodically verify the conformity of the parts being machined to the specification in the router packet.</li><li>Adjust program parameters to allow for variation in tool edge, material hardness, and other factors affecting the effective performance of the milling center.</li><li>Grind, deburr and polish parts to achieve smooth finished edges and surfaces, and then clear out the interior surfaces of all holes.</li><li>Perform basic day- to-day maintenance of machine, including checking &amp; filling coolant and cleaning the machine.</li><li>Provide feedback for product improvements for quality and cost as part on ongoing learning process of operations.</li><li>Exhibit a High Quality Control Standard First Piece Quality or Zero Scrap Mentality.</li><li>Supports the company and department business goals and objectives for Quality, Cost, Delivery, Safety and Attitude (QCDSA).</li><li>Function as a team member and under minimal supervision.</li></ul> To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. EDUCATION: High School diploma or equivalent. EXPERIENCE: <ul><li>Minimum 2 years CNC experience in a manufacturing environment.</li><li>Ability to read, interpret and edit G-code.</li><li>Must be able to set up machines with no supervision.</li><li>Experience in editing programs. Ability to calculate figures and amounts such as proportions, percentages, area, circumference and volume. Ability to apply concepts of basic algebra and geometry.</li><li>Must have own tools.</li><li>High proficiency in Blue Print Reading, GD&amp;T, Inspection Tools &amp; Methods.</li><li>Experience with Aerospace materials, tolerances and quality requirements beneficial.</li><li>Familiarity with forklift operations beneficial; ability to successfully pass a forklift operations test.</li><li>Basic Quality procedures / ISO</li></ul> Pryer Aerospace is committed to providing a benefits package that strives to meet the needs of its employees and their dependents. Employees receive excellent compensation and benefits with medical, dental and vision, 401(k), paid vacation and holidays. Pryer Aerospace is proud to be an equal opportunity employer Male/Female/Disabled/Veteran

11 Jobs in Oklahoma