field_remote_option

field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

field_job_salary_range

POSITION SUMMARYSenior CNC Machinist role. Responsible for setting up and operating CNC machine tools to cut and shape metallic workpieces. Manual machining also required for some projects.BENEFITS<ul><li>Pay based on skill and experience ($20-30/ hour)</li><li>Health Insurance plus Dental &amp; Vision coverage</li><li>401K</li></ul>ESSENTIAL DUTIES AND RESPONSIBILITIES (may vary depending on machine assignment)<ul><li>Operate Haas and Toshiba CNC Mills or Mori Seiki lathes used to cut and shape precision workpieces&nbsp;</li><li>Program CNC mills or lathes in Mastercam</li><li>Read and interpret blueprints and/or job orders to determine product specifications, tooling instructions, and sequence of operations.</li><li>Mount, install, align, and secure tools, attachments, fixtures, and workpieces on CNC machines.</li><li>Control position of tool and workpiece in relation to each other and set specified feeds, speeds, and depth of cut. Make adjustments as necessary.</li><li>Set-up fixture or feeding device, start machine, feed tool to workpiece, and engages feed.</li><li>Direct flow of coolant or cutting oil against tool and workpiece.</li><li>Visually and audibly observe operation of CNC machine to verify conformance of machined workpiece to blueprint and/or job order specifications and to detect sounds, such as those made by dull cutting tools or excessive vibration. Correct identified production problems as necessary.</li><li>Operate various small equipment to complete workpieces.</li><li>Assist and train CNC Machinists in machine set up procedures.</li><li>Use all safety devices/tools to ensure safe operation of CNC machines.</li><li>Inspect all finished product to confirm meets blueprint and/or job order specifications.</li><li>Complete all required paperwork.</li><li>Perform minor machine maintenance as required or directed.</li><li>Ensure work area is kept clean and organized at all times.</li><li>Knowledge, understanding, and compliance with Company policies and procedures.</li><li>Make recommendations to implement improved processes.</li><li>Provide feedback to management concerning possible problem or areas of improvement.</li><li>All other duties as assigned</li></ul>Qualifications:<ul><li>High school or General Equivalency Diploma (GED) or technical school diploma or equivalent in relevant work experience preferred.</li><li>5 years related experience and training preferred.</li><li>Proficient in accurate use of micrometers, calipers, and other measuring tools.</li><li>Ability to read and work to set tolerances and work from blueprints.</li><li>Ability to set-up and operate CNC Mills. Programming skills required.</li><li>Mechanically inclined and possess strong degree of attention to detail.</li><li>Ability to define problems, collect data, establish facts, and draw and apply valid conclusions.</li><li>Ability to read, write, and comprehend simple instructions and/or correspondence.</li><li>Basic mathematical skills required.</li><li>Ability to work in a team fostered environment.Our vision is to consistently provide a level of service and customer relationship that makes it feel like you have your own in-house CNC shop with the expertise and manufacturing horsepower of a larger supplier. We are committed to an exceptional level of communication and transparency throughout the manufacturing process. At the same time, we are developing the Next Generation of Manufacturing Professionals</li></ul>

Senior CNC Machinist

Job Title: CNC Swiss-Lathe Setup Machinist - Afternoon ShiftDepartment: OperationsReports to: CNC Turning ManagerSchedule: 3:30pm – 11:30pm, Monday - FridayCompany: Mount Mfg is an orthopedic contract manufacturing company located in Marquette, MI. The company operates with a quality system that is ISO 13485:2016 certified and FDA registered.Job Responsibilities:<ul><li>Setup, trouble-shoot and operate CNC Swiss Lathes (sliding headstock) including tooling installation, offsets, work-holding, coolant lines (high and low pressure), and understand and perform all conventional methods of swiss machining</li><li>Perform minor program adjustments as needed when approved by manager (i.e. deburring passes, order of operation, speed &amp; feed adjustments, etc)</li><li>Perform and document in-process inspection utilizing good documentation practices</li><li>Assist co-workers in the troubleshooting of CNC machining issues</li><li>Ability to read and interpret prints and GD&amp;T per ASME Y14.5</li><li>Attend Pre-production Meetings as needed</li><li>Must have social skills to adequately operate in a team environment and maintain a positive company culture</li><li>Act as a leader and mentor to new operators learning CNC machining</li><li>Other duties as assigned</li></ul>Experience/Education: High School Diploma, and 5+ years experience in a relevant manufacturing environment with minimum 2 years of swiss-lathe setup experienceExperience with 21 CFR Part 820 and ISO 13485:2016 preferred but not requiredKnowledge of common manufacturing processes such as CNC milling, CNC turning, blast finishing, laser marking, cleaning, passivation, anodization, heat treatment, forming, etc. preferred but not required.Travel Requirements: Minimal. Occasional technical training workshopsJob Type: Full-timePay: $26.00 - $35.00 per hourBenefits:<ul><li>401(k)</li><li>401(k) matching</li><li>Dental insurance</li><li>Flexible schedule</li><li>Health insurance</li><li>Health savings account</li><li>Life insurance</li><li>Paid time off</li><li>Vision insurance</li></ul>Schedule:<ul><li>8 hour shift</li><li>Day shift</li><li>Monday to Friday</li></ul>Education:<ul><li>High school or equivalent (Required)</li></ul>Experience:<ul><li>Swiss-lathe setup: 2 years (Required)</li><li>CNC Machining: 3 years (Required)</li></ul>Work Location: In person

CNC Swiss-Lathe Setup Machinist

ESSENTIAL DUTIES:<ul><li>Review work order specifications and tool sheet for each job order with machinists.</li><li>Assure that the tool sheet and provided tools correspond to each other and to the work order being produced and understand how tools for a specific job are to be used.</li><li>Review with machinists to ensure that the correct raw material and quantity of materials are provided and corresponds to the work order.</li><li>Provide CNC program required to create part and download into controller of the correct machine being used.</li><li>Assist in performing machine set up by correctly positioning tools and raw materials into machine, review CNC program and check all for accuracy. You must be able to set the machine up and troubleshoot if necessary.&nbsp;</li><li>Oversee the production of one piece to create a first article and submit for inspection.</li><li>Be familiar with the machining of parts to specifications using machine tools such as lathes, milling machines, grinders and performs inspection using gauges, micrometers, and calibers.</li><li>Ensure parts are machined to customer specifications. Align and secure holding fixtures, cutting tools, attachments, accessories, and materials onto machines and monitor the feed and speed of machines during the machining process.</li><li>Ensure that your area of the shop is kept clean and tidy.</li><li>Review labor and ensure that the employees who report to you are following the company guidelines.</li><li>Enforce company policies and procedures.</li><li>Other duties may be assigned as needed.</li></ul>EDUCATION and/or EXPERIENCE:A bachelor’s degree in manufacturing or related technologies with 1-3 years of experience, or an associate degree with 3-5 years of experience, or a certification from a technical training course and 5-10 years of experience is required.&nbsp;As a candidate, you must have hands on experience with CNC Mills, lathes, mill-turns or Swiss Lathes. You must know and understand G code machine programming with the ability to troubleshoot CNC programs if issues arise. You will need knowledge of machines and tools, including their designs, uses, repair, and maintenance, raw materials, production processes, quality control, and other techniques for the manufacturing process.This position would be well suited for a CNC machinist, a machine shop leadman or a CNC class instructor who would be looking to take the next step in their career. Training will be provided to ensure that you will succeed with overseeing several CNC machinists.QUALIFICATION REQUIREMENTS:<ul><li>You must be very detailed oriented, organized, have good communication skills and be a team player.</li><li>You must be able to carefully perform each job task, have acute hand eye coordination.</li><li>You must be able to work quickly and repeatedly adjust the controls of a machine to exact positions.</li></ul>We offer a competitive compensation package along with an excellent benefits plan, including health and dental insurance, vision, life insurance, short term disability, long term disability, 401(k) savings program with a company match, holiday/vacation and more.Salary - $100K - $115K

Manufacturing Floor Supervisor

Job DescriptionLocated in Buellton, CA USARequirements:• 15+ years of CNC machine experience, majority in aerospace is required• 5+ years multi axis machining• 5+ years swiss or B axis machining• Must be an Expert in Lathe CNC Setup and Machining, little to no help needed• Experience working in a job shop manufacturing environment• Knowledge of blueprint reading, GD&amp;T, SPC, mechanical inspection methods• Strong mechanical aptitude and problem-solving skills• Leads by example• Macros and probing not necessary but a big plusResponsibilities:• We are seeking a Master CNC Machinist, who can lead, coach, and develop department operations, while working on the floor closely with co-workers within their department• Lead/Coach/Train/Develop/Mentor machinist/operators and cross trains current employees on operations, set-ups, and procedures; assures proper and complete knowledge of such training is signed off• Highly advanced and skilled machinist. Go-to machinist for tight tolerance, high risk aerospace machining• Manage set-up, operation, and trouble shooting of a cell of cnc machines.We are seeking a Master CNC Machinist, who can lead, coach, and develop department operations, while working on the floor closely with co-workers within their department.Qualifications:• 15+ years of CNC machine experience, majority in aerospace is required• 5+ years multi axis machining• 5+ years swiss or B axis machining• Must be an Expert in Lathe CNC Setup and Machining no help needed• Experience working in a job shop manufacturing environment• Knowledge of blueprint reading, GD&amp;T, SPC, mechanical inspection methods• Strong mechanical aptitude and problem-solving skills• Leads by example.• Thorough knowledge of machining methods and procedures as they apply to work assignments• Demonstrated ability to perform and inspect assigned machining functions, including complex and complicated processes• Excellent communication skills• Pay range from 100-200kResponsibilities:• Lead/Coach/Train/Develop/Mentor machinist/operators and cross trains current employees on operations, set-ups, and procedures; assures proper and complete knowledge of such training is signed off.• Highly advanced and skilled machinist. Go-to machinist for tight tolerance, high risk aerospace machining.• Support team with 1st Article runs, Inspection with Aerospace grade materials and Aerospace standards.• Manage set-up, operation, and trouble shooting of a cell of CNC machines.• Coordinates daily production needs that address safety, quality and productivity.• Programming support in Esprit• Experience with Multi Spindle, Multi Turret CNC machines.• Experience using live tooling.• Low volume and high product mix production.• Create corrective action plans for quality spills, knowledge gaps, or any mishaps in assigned cells. Make recommendations for improvements.• Communicates with the team, engineering, and management.• Performs other duties as assigned.Company DescriptionThe company continues to expand its expertise and capability within specialized markets including the vast and exciting aerospace arena, defense and weaponry, along with fluids and hydraulics. True Precision Machining operates under strict quality guidelines adhering to our AS9100, ISO9001 and ITAR Certifications. We are focused on quality in all areas of performance. This modern, clean and well-planned facility is 17,000 square feet is climate controlled. Our equipment is high-end, current, well-maintained and is operated by the best professional manufacturing personnel. This facility also features a dedicated and well-staffed inspection department with the latest in inspection/testing metrology.

Multi Axis Lead Machinist

SUMMARY:&nbsp; This CNC Machinist – Class A position is responsible for setting up and operating multi-axis CNC lathes.&nbsp; 1st and 2nd shift positions available (with 2nd shift differential)ESSENTIAL DUTIES:<ul><li>Set-up and run multi-axis CNC lathes.</li><li>Inspect own work and make any off-set changes as required to ensure an acceptable first piece.</li><li>Use standard inspection equipment such as micrometers, calipers, and gages.</li><li>Read and interpret blueprints and follow detailed work instructions.</li><li>Change any tools required and hold tight tolerances.</li><li>Meet production schedules and quality standards.</li><li>Troubleshoot own work and assist others with set-up and/or production difficulties.</li></ul>EDUCATION and/or EXPERIENCE:<ul><li>High school diploma or equivalent required</li><li>3-5 years’ experience setting up and operating multi-axis CNC lathes</li><li>Swiss Turn experience a +</li><li>Must have good shop math skills</li></ul>QUALIFICATIONS:<ul><li>Must be very detail oriented, organized, have good communication skills and be a team player.</li><li>Must be able to work quickly and accurately with little supervision.</li></ul>Hourly rate starting at: $34.00

CNC Machinist – Class A/Leadman - Lathe

Industry: Manufacturing &amp; Production Job Category: Manufacturing - Production The Company is currently seeking a CNC &amp; NC Machine Setup &amp; Operator. The core hours are 6:00am to 2:30pm.&nbsp;What you’ll do:<ul><li>Setup and operate NC and CNC machines and any conventional machines in the Casting Cells to perform a variety of turning, drilling, tapping, boring, reaming, threading, forming, facing, milling, slotting, grooving, chamfering, serrating and deburring operations to produce a variety of explosion-proof parts of various materials</li><li>Operate machines include, but are not limited to, single spindle and multi-spindle drill presses and tappers; milling machines; parts washers; and deburring grinder</li><li>Refer to assembly drawings, wiring diagrams and machining blueprints to maintain tolerances.</li><li>Set controls and perform other manual data input functions as required, review operation data sheets, parts program, tape readouts and prints, and change collets and/or chucks; load and unload parts; load, unload and adjust tools as necessary</li><li>Check first piece using fixed or adjustable gauges; gauge periodically and visually inspect all parts for appearance and compliance to specifications; correct for any discrepancies.</li><li>Maintain a supply of materials to machines and remove finished work as necessary to establish a flow through the cells</li><li>Operate fork truck to facilitate own work or to move material around department as required</li><li>Maintain work area, machines and control units in a clean, neat and orderly condition and follow 5-S's principles</li></ul>Qualifications: Basic Qualifications:<ul><li>Minimum two (2) years’ previous work experience in machine setup and operation</li><li>Ability to read and understand blueprints, charts, and tables</li><li>Authorized to work in the United States without Company sponsorship.</li><li>No relocation benefit is offered for this position. Only candidates residing within the immediate area of Syracuse facility (50 miles) will be considered for this position. &nbsp;</li></ul>Preferred Qualifications:<ul><li>3+ years of work experience with NC &amp; CNC machine setup and operation</li><li>Fork Truck experience</li></ul>

CNC & NC Machine Setup & Operator

A tool and die maker machinist plays a critical role in manufacturing by producing tools, dies, and fixtures used in the production of various products. This position requires a combination of technical skills, precision machining expertise, and the ability to interpret engineering drawings. Below is a detailed job description for a tool and die maker machinist:Job Summary:As a tool and die maker machinist, you will be responsible for setting up, operating, and maintaining machine tools to produce precision parts, tools and fixtures. Your work will involve interpreting blueprints, sketches, and engineering specifications to determine the sequence of operations needed to fabricate parts. You will work with a variety of metals and materials to create components used in manufacturing processes.Responsibilities:<ol><li>Reading Blueprints and Specifications:<ol><li>Interpret technical drawings and blueprints to understand the design requirements.</li><li>Determine the sequence of operations and the required tooling.</li></ol></li><li>Setting Up and Operating Machines:<ol><li>Set up and operate machine tools such as VTLs, horizontal boring mills, milling machines, lathes and grinders.</li><li>Use precision measuring instruments to ensure accurate machining.</li></ol></li><li>Tool and Die Making:<ol><li>Build and repair cutting tools, jigs, fixtures, gauges, and dies.</li><li>Perform precision grinding, fitting, and assembly of components.</li></ol></li><li>Quality Control:<ol><li>Inspect finished parts, tools and fixtures for accuracy and quality.</li><li>Make necessary adjustments to meet specifications.</li></ol></li><li>Troubleshooting and Maintenance:<ol><li>Identify and resolve issues with machine tools and equipment.</li><li>Perform routine maintenance on machines to ensure optimal performance.</li></ol></li><li>Collaboration:<ol><li>Coordinate with engineers, designers, and other machinists to discuss projects and resolve design issues.</li><li>Work closely with production teams to ensure tools and fixtures meet manufacturing requirements.</li></ol></li></ol>Skills and Qualifications:<ul><li>Proven experience as a tool and die maker or a manual machinist in a manufacturing environment.</li><li>Proficiency in reading and interpreting technical drawings and blueprints.</li><li>Extensive knowledge of machine tools and equipment including lathes, horizontal and vertical mills, vertical turret lathes and horizontal boring mills.</li><li>Strong understanding of metal properties and machining techniques.</li><li>Excellent problem-solving skills and attention to detail.</li><li>Ability to work independently and as part of a team.</li><li>Good communication and interpersonal skills.</li></ul>Education and Training:<ul><li>High school diploma or equivalent; vocational or technical training in machining or tool and die making is preferred.</li><li>Apprenticeship or journeyman certification in tool and die making or a related field is advantageous.</li></ul>

Tool and Die Maker Machinist

JOB SUMMARYThe primary purpose of this position is to oversee machining operations and guide staff to appropriate workflow, quality and on time completion. This position constantly seeks to ensure all machining activities are conducted in a manner to achieve company quality and productivity goals, while maintaining safety as an overriding priority.ESSENTIAL DUTIESSupervisory duties 60%<ul><li>Oversees and organizes the schedules and work of department.</li><li>Ensures department has appropriate staff to meet objectives.</li><li>Assists with preparation of budgets for department.</li><li>Keeps and maintains appropriate production and employee records.</li><li>Ensures that assigned staff comply with company policies and safety standards.</li><li>Coordinates with senior management to respond to employee concerns or complaints.</li><li>Work with Leads to coordinate builds on a daily basis.</li><li>Assist in problem solving, making suggestions, and guiding staff accordingly.</li><li>Ensure the weekly product line status reports are accurate; Present at weekly meeting.</li><li>Performance management – conduct annual reviews for each employee; monitoring performance on a daily basis; correct performance where necessary through disciplinary action, training, guiding etc., depending on the issue at hand.</li><li>Ensure safety of employees by ensuring they use tools and equipment properly and safety;</li><li>Collaborate effectively with manufacturing and employees in other departments, ensuring positive relationship building</li><li>Coordinates handling of manufacturing personnel issues with HR when necessary.</li></ul>General 35%<ul><li>Perform machining tasks to assist machining staff as needed.</li><li>Organize and perform machining operations on assigned projects, delegate tasks as necessary.</li><li>Perform leadman duties for assigned projects.</li><li>Participate in special projects as assigned.</li><li>Ensure strong coordination with Sales, Engineering, and Assembly.</li><li>Promote/Role model a positive attitude and strong team engagement.</li><li>Understands and reacts positively to constraints related to available resources, making judgement in the best interest of the company on the most efficient use of resources by balancing between cost and delivery.</li><li>Promotes a culture of continuous improvement across all manufacturing functions by encouraging employees to develop recommendations related to their primary functions and/or expertise.</li><li>Continuously assess performance of all machining functions to ensure all functions have adequate resources, materials, and information to be as productive and efficient as possible.</li><li>Identifies shortcomings in staffing and advises supervisor in recruitment, employee performance improvement up to termination, training, and development of staff to meet company performance needs.</li><li>Maintains knowledge of manufacturing technologies and processes current to advanced industry standards.</li><li>Advises management on purchase of new machinery, equipment, tooling, and software to ensure the company maintains maximum competitiveness in industry.</li></ul>Other Duties 5%<ul><li>Participate in special projects as requested by executive management.</li></ul>REQUIRED KNOWLEDGE, SKILLS, AND ABILITIES<ul><li>Strong listening skills to fully understand the inquiries, direction and communications among all employees</li><li>Strong written, oral communication and organization skills</li><li>Demonstrated leadership capabilities</li><li>Well versed in Microsoft Office and the ability to easily learn how to use other computer programs.</li><li>Familiar with Epicor or similar ERP software.</li><li>Understands blueprints, job travelers, work instructions, program and tooling sheets, tooling specifications, quality documents and familiar with GD&amp;T.</li><li>Familiarity with Mastercam and SolidWorks or similar CAD/CAM software.</li><li>Expert at using handheld inspection tools such as vernier calipers, OD/ID micrometers, bore gauges, etc. and understanding the correct application for each type.</li><li>Expert at reading and interpreting engineering technical drawings, tolerancing, and GD&amp;T.</li><li>Strong understanding of manufacturability of various types materials such as Aluminums, Steels, Stainless Steels, Tool Steels, and Plastics.</li><li>Strong understanding of various machining and fabricating processes, and electro-mechanical assembly.</li><li>Comprehensive knowledge of types of tooling and machinery, their correct applications, and proper use.</li><li>Proven ability related to problem solving</li><li>Proven collaboration skills</li><li>Strong organization skills</li><li>Strong ethical conduct</li><li>Team player; with flexibility to handle a variety of responsibilities as needed</li><li>Positive, diplomatic attitude</li></ul>Experience required:<ul><li>Ten plus years or related experience, with at least five years of supervisory experience or related skills developed otherwise</li></ul>QUALIFICATION STANDARDS<ul><li>High school diploma or equivalent required</li><li>Associates or bachelor degree in a technical discipline a plus</li></ul>ERGONOMIC REQUIREMENTSSitting, standing, stooping, bending, standard lifting up to 15 pounds, carrying, repetitive movements due primarily to computer work. Must be able to traverse the entire facility. Prolonged periods of sitting at a desk and working on a computer. All of the ergonomic requirements must be performed without significant risk of injury to oneself or others, or otherwise demonstrated or explain how one can perform essential functions of the position listed above.The employee signature below constitutes employee’s understanding of the requirements, essential functions and duties of the position.Management reserves the right to change duties or combine duties at any time.

CNC Machining Supervisor

Ready to join an award-winning company and disrupt the manufacturing industry as a Lathe Setup Machinist III? Then, let’s talk!What You’ll Do<ul><li>Setup CNC equipment to produce high quality parts, according to blueprints and engineering models.</li><li>Interpret (G-Code) programming, set up, and run CNC lathes.</li><li>Understand speeds &amp; feeds with an ability to align and secure holding fixtures, cutting tools, attachments, and accessories.</li><li>Responsible for selecting and installing tooling into tool posts or indexing heads.</li><li>Observe numerical display on control panel and compare with data on print sheet to verify dimensional adjustments on machining cuts.</li><li>Run first piece and check for conformance to specifications, complying with inspection requirements outlined by the Quality Department.</li><li>Responsible for following and maintaining 5S in work area and performing total preventative maintenance activities.</li><li>Load and unload raw material or parts into machining centers.</li><li>May calculate complex and/or component angles and dimensions.</li><li>Will use digital measurement tools with an emphasis on dimensional accuracy and precision.</li><li>Other duties as assigned.</li></ul>What We Are Looking For<ul><li>High School Diploma/GED</li><li>Minimum of five (5) years of machining experience with a familiarity of G-Code</li><li>Experience with Siemens and/or Fanuc Controls</li><li>Proven experience as a lathe CNC Machinist in the manufacturing field including multi-axis lathes</li><li>Ability to maintain tight tolerances, and to read and interpret blueprints and use required digital measuring instruments</li><li>Experience with basic shop math, and familiarity with GD&amp;T</li><li>Basic computer skills</li></ul>Even Better<ul><li>Associate degree from an accredited college or university</li><li>Previous experience in an AS9100 Environment strongly preferred</li><li>Proficiency with DMG Mori, Grob, Okuma, or Makino machine tools</li><li>Experience with high temp alloys, such as Inconel and Monel</li><li>Machining credentials/certifications; i.e. CNC Turning Specialist</li><li>Foundational GD&amp;T certification per GD&amp;T ASME Y14.5 – 2018 standards</li><li>Certified in Lean Six Sigma; Yellow Belt or Higher</li><li>Experience in use of automation in manufacturing processes</li><li>Experience with Mastercam, specifically 2023 or newer</li></ul>Why Northeast Tool?<ul><li>Competitive pay</li><li>Medical, dental, vision, and life insurance</li><li>Company Matched 401K (Roth and Traditional)</li><li>Challenging and rewarding career</li><li>Family, team-focused working environment</li></ul>We believe the only way our company can grow is when we nurture the growth of our employees. We are committed to working hard, having fun, and making an impact in our community. Sound too good to be true? Apply today to join our team

Lathe Setup Machinist III

Job Summary: A CNC Machine Operator is an integral member of the Machine Shop staff that contributes their expertise and focus to the setup and creation of product on a variety of CNC mills and lathes. They work hand-in-hand with CNC Programmers and the MS Foreman to ensure accurate, precise, and efficient parts are made, exceeding the requirements of our customers.Responsibilities:<ul><li>Review CAM programs for setup and operation of various CNC mills (3,4, and 5-axis) and lathes based on proficiencies and need.</li><li>Produce precision products that conform to customer tolerancing requirements.</li><li>Manage personal workflow to ensure alignment with MS schedule.</li><li>Support activities for the Machine Shop, as requested.</li><li>Support activities for Pro-Type, as requested.</li></ul>Skills/Abilities:<ul><li>MasterCAM interpretation</li><li>CNC Mill Operation/setup</li><li>CNC Lathe Operation/setup</li><li>Manual Equipment Operation</li><li>Use of mics, gauges, calipers, etc.</li><li>Understanding of GD&amp;T</li><li>Strong attention to detail</li><li>Strong analytical and critical thinking skills</li><li>SolidWorks or 3D CAD experience</li></ul>Education/Experience Requirements:<ul><li>High school diploma / GED</li></ul>Physical Requirements:<ul><li>Able to lift 75lbs.</li></ul>Character:<ul><li>Cooperative and collaborative</li><li>Curious and enthusiastic about learning and improving</li><li>Respectful of others</li><li>Acts with integrity</li></ul>

935 Full Time Jobs