field_job_employment_type

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

field_job_salary_range

Industry: Manufacturing &amp; Production Job Category: Manufacturing - Production The Company is currently seeking a CNC &amp; NC Machine Setup &amp; Operator. The core hours are 6:00am to 2:30pm.&nbsp;What you’ll do:<ul><li>Setup and operate NC and CNC machines and any conventional machines in the Casting Cells to perform a variety of turning, drilling, tapping, boring, reaming, threading, forming, facing, milling, slotting, grooving, chamfering, serrating and deburring operations to produce a variety of explosion-proof parts of various materials</li><li>Operate machines include, but are not limited to, single spindle and multi-spindle drill presses and tappers; milling machines; parts washers; and deburring grinder</li><li>Refer to assembly drawings, wiring diagrams and machining blueprints to maintain tolerances.</li><li>Set controls and perform other manual data input functions as required, review operation data sheets, parts program, tape readouts and prints, and change collets and/or chucks; load and unload parts; load, unload and adjust tools as necessary</li><li>Check first piece using fixed or adjustable gauges; gauge periodically and visually inspect all parts for appearance and compliance to specifications; correct for any discrepancies.</li><li>Maintain a supply of materials to machines and remove finished work as necessary to establish a flow through the cells</li><li>Operate fork truck to facilitate own work or to move material around department as required</li><li>Maintain work area, machines and control units in a clean, neat and orderly condition and follow 5-S's principles</li></ul>Qualifications: Basic Qualifications:<ul><li>Minimum two (2) years’ previous work experience in machine setup and operation</li><li>Ability to read and understand blueprints, charts, and tables</li><li>Authorized to work in the United States without Company sponsorship.</li><li>No relocation benefit is offered for this position. Only candidates residing within the immediate area of Syracuse facility (50 miles) will be considered for this position. &nbsp;</li></ul>Preferred Qualifications:<ul><li>3+ years of work experience with NC &amp; CNC machine setup and operation</li><li>Fork Truck experience</li></ul>

CNC & NC Machine Setup & Operator

JOB SUMMARY: Responsible for the production of machined parts by programming, setting up, and operating a computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records; maintaining equipment and supplies. ESSENTIAL JOB DUTIES: <ul><li>Plans machining by studying work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&amp;T).</li><li>Programs mills and lathes by entering instructions, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs.</li><li>Sets up CNCs, mills, and lathes by installing and adjusting the appropriate tools.</li><li>Verifies settings by measuring positions, first-run part, and sample workpieces; adhering to international standards.</li><li>Maintains specifications by observing drilling, grooving, and cutting, including turning, facing, knurling, and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes</li><li>Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs</li><li>Demonstrates cooperative communication with other departments and functions including production, machining, welding, purchasing, engineering, and other corporate leaders.</li><li>Accomplishes organization goals by accepting ownership for contributions and leading by example; and exploring opportunities to add value to accomplishments of new and existing jobs.</li><li>Follow quality control standards to ensure meeting quality and quantity requirements</li><li>Maintains safe operations by adhering to safety protocols and regulations.</li><li>Monitor wear of consumable tools and notify purchasing as required</li><li>Accurately report work performed</li><li>Keep work area neat and orderly and follow all safe work practice requirements</li><li>Maintain identification of all parts and materials and record location of the same</li><li>Report abnormal machine operating conditions immediately</li><li>Performs other duties as assigned.</li></ul>Requirements Qualifications: <ul><li>A high school diploma or general education degree (GED) is required and 3 years of CNC experience is strongly desired.</li><li>Must be able to successfully operate an overhead crane</li><li>Possess and practice good oral and written communication skills.</li><li>Treat fellow co-workers with dignity and respect.</li><li>Possess and utilize basic math skills and exercise superior organizational skills</li><li>Prior CNC, production machine, and/or welding experience is highly desired.</li><li>Maintain and exhibit a positive attitude toward our work and our work environment.</li><li>Demonstrated experience with hand and power tools, banders, hoists, and other production equipment, as well as an overall mechanical aptitude</li><li>Forklift certification is required.</li><li>Participate in training events (ie; Lockout/Tagout; HazCom; and overhead crane training)</li></ul> Knowledge: GD&amp;T conceptual skills, process improvement, verbal communication, functional and technical skills, controls and instrumentation, supply management, tooling, coordination, inventory control, attention to detail, and sound judgment. EQUIPMENT LISTING (MACHINES, TOOLS &amp; SOFTWARE): Basic personal computer skills that include the ability to send/receive e-mail messages. May be required to operate Computer, Email, Microsoft Excel, Printer, Copier, Fax Machine, Telephone, Scanner, calculator, micrometers and gauges, power tools, hand tools, forklifts, and pallet jacks. PHYSICAL ACTIVITIES AND DEMANDS: Moderate Lifting: Exerting up to 20 pounds of force frequently and/or up to 50 pounds of force occasionally and/or a negligible amount of force frequently to move objects. MENTAL AND VISUAL DEMAND: Close mental and visual attention to prepare and analyze data and figures, work on a computer, read, or control machines or processes at a rapid pace that requires close coordination and fine adjustment. Moderate mental and visual attention to perform manual work, machine operations, set-ups, inspections, and adjustments that require frequent decisions to detect and adjust for variance from proper operation. ENVIRONMENTAL CONDITIONS: Work Environment: Work in a production area exposed to seasonal temperatures, both high and low. Occupational Hazards: Proximity to moving mechanical parts, moving vehicles, electrical current, welding flash, and exposure to potential injury without safe work practices and appropriate personal protective equipment (PPE). Safety Equipment: May wear a variety of PPE, including safety glasses with side shields, safety shoes, and other required PPE in accordance with working tasks. PPE may include gloves and hearing protection when performing certain functions. Salary Description $23.00 to $ 28.00/ HR

CNC Programmer

Responsible for CNC Set Up with the ability for full change over and set up on different manufactures of CNC machines including HAAS and Doosan, maintaining quality and safety standards; keeping records; maintaining equipment and supplies, and working closely with other departments within the organization to ensure optimal use of equipment and personnel. As a valued member of the production team the CNC Set Up Technician will also have the ability to train other operators as required. Requirements ESSENTIAL JOB DUTIES: <ul><li>Plans machining by studying work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&amp;T).</li><li>Successfully setup proven / existing programs and processes with minimum supervision / guidance.</li><li>Proficiency in setting up either vertical or horizontal CNC multi axis machining centers or multi turret lathes with multi-part holding fixtures including defining work and tool offsets.</li><li>Setup and measurement of tooling in a variety of holders.</li><li>Schedules production through the machining depart using travelers and with the available equipment and manpower to meet customer due dates. </li><li>Sets-up mills and lathes by installing and adjusting three- and four-jaw chucks, tools, attachments, collets, bushings, cams, gears, stops, and stock pushers; indicating vices; tramming heads.</li><li>Train operators to properly operate and to perform preventive maintenance on both CNC equipment and computer components.</li><li>Verifies settings by measuring positions, first-run part, and sample workpieces; adhering to international standards.</li><li>Uses CAD modeling to fabricate and design tools an fixtures.</li><li>Analyzed tool usage including selection, design, and integration in order to reduce cycle time while maintaining quality output.</li><li>Maintains specifications by observing drilling, grooving, and cutting, including turning, facing, knurling and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes</li><li>Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs.</li><li>Demonstrates cooperative communication with other departments and functions of including production, machining, welding, purchasing, engineering, and other corporate leaders.</li><li>Accomplishes organization goals by accepting ownership for contributions and leading by example; and exploring opportunities to add value to accomplishments new and existing jobs.</li><li>Follow quality control standards to ensure meeting quality and quantity requirements.</li><li>Maintains safe operations by adhering the safety protocols and regulations.</li><li>Monitor wear of consumable tools and notify purchasing as required.</li><li>Accurately report work performed.</li><li>Keep work area neat and orderly and follow all safe work practice requirements.</li><li>Maintain identification of all parts and materials and record location of same.</li><li>Report abnormal machine operating conditions immediately.</li><li>Performs all other duties as assigned.</li></ul>Qualifications: <ul><li>High school diploma or general education degree (GED) required and 3 years CNC experience strongly desired.</li><li>Must be able to successfully operate an overhead crane</li><li>Must be familiar wih CAD equipment</li><li>Possess and practice good oral and written communication skills.</li><li>Treat fellow co-workers with dignity and respect.</li><li>Possess and utilize basic math skills and exercise superior organizational skills</li><li>Prior CNC, production machine and/or welding experience highly desired.</li><li>Maintain and exhibit a positive attitude toward our work and our work environment.</li><li>Demonstrated experience with hand and power tools, banders, hoists, and other production equipment, as well as an overall mechanical aptitude</li><li>Forklift certification required.</li><li>Participate in training events (ie; Lockout/Tagout; HazCom; and overhead crane training)</li></ul>Knowledge: GD&amp;T conceptual skills, process improvement, verbal communication, functional and technical skills, controls and instrumentation, supply management, tooling, coordination, inventory control, attention to detail, and sound judgment. EQUIPMENT LISTING (MACHINES, TOOLS &amp; SOFTWARE): Basic personal computer skills that include the ability to send/receive e-mail messages. May be required to operate Computer, Email, Microsoft Excel, Printer, Copier, Fax Machine, Telephone, Scanner, and calculator, micrometers and gages, power tools, hand tools, forklifts and pallet jacks. PHYSICAL ACTIVITIES AND DEMANDS: Moderate Lifting: Exerting up to 20 pounds of force frequently and/or up to 50 pounds of force occasionally and/or a negligible amount of force frequently to move objects. MENTAL AND VISUAL DEMAND: Close mental and visual attention to prepare and analyze data and figures, work on a computer, read, or control machines or processes at a rapid pace that requires close coordination and fine adjustment. Moderate mental and visual attention to perform manual work, machine operations, set-ups, inspections, and adjustments that require frequent decisions to detect and adjust for variance from proper operation. ENVIRONMENTAL CONDITIONS: Work Environment: Work in production area exposed to seasonal temperatures, both high and low. Occupational Hazards: Proximity to moving mechanical parts, moving vehicles, electrical current, welding flash and exposure to potential injury without safe work practices and appropriate personal protective Equipment (PPE). Safety Equipment: May wear a variety of PPE, including safety glasses with side shields, safety shoes and other required PPE in accordance with working tasks. PPE may include gloves and hearing protection when performing certain functions Salary Description $23.00 to $ 28.00/ HR

CNC Set-Up Operator

THE ROLE: A CNC programmer writes code to automate power driven machines that cut and finish metal, as lathes, grinders and mills. This position is a 40 plus (+) hour position. Machinery Supervisor or Lead experience a plus. This position is based in our facility in Canastota, NY. RESPONSIBILITIES &amp; ESSENTIAL FUNCTIONS: <ul><li>Creates instructions for machinists.</li><li>Reviews 3D/2d CAD design blueprints.</li><li>Provides support to machinists during CNC machine set-up.</li><li>Makes calculations for programming including where materials should be cut.</li><li>Translates instructions into a computer automated manufacturing (CAM) program. </li><li>Checks completed programs by running simulations or tests.</li><li>Prepares geometric layout of designs using proper software.</li><li>Determines sequence of operations in a program.</li><li>Choose cutting tools that will be needed.</li><li>Analyzes job order and performs necessary calculations.</li><li>Writes programs and modifies existing ones for increased efficiency.</li><li>Analyzes and selects speeds and cutting tools for programs.</li><li>Makes improvements to set up times for a task and contouring of complex shapes.</li><li>Simplifies tooling time for workers and increases productivity for the client.</li><li>Evaluates all completed designs to validate their functions and ensure they successfully reduce time and money for the client.</li><li>Monitors all programs to make sure they follow blueprint instructions and safely and successfully complete the task.</li><li>Provides training for employees on automated systems.</li><li>Complies with all safety rules and regulations.</li></ul> JOB REQUIREMENTS &amp; QUALIFICATIONS: <ul><li>Must have experience with Mastercam and SolidWorks.</li><li>Must have excellent reading comprehension skills.</li><li>Experience programming of 3, 4 and 5-axis, mills and lathes</li><li>Good math skills, especially algebra, trigonometry, and physics.</li><li>Must have good problem-solving skills.</li><li>Must have excellent time management skills, organizational and planning skills</li><li>Must have excellent written and verbal communication skills.</li><li>Must be mechanically inclined.</li><li>Knowledge of metal shop work.</li><li>Must be highly detail oriented.</li><li>Must be able to work effectively with little or no supervision.</li></ul>EDUCATION: <ul><li>High School diploma.</li><li>Knowledge of electronics and machine tools.</li><li>At least 4 years of experience with programming.</li><li>Complete an apprenticeship.</li><li>Continuing education to learn new techniques as they emerge.</li><li>Certification from accredited technical school or work experience.</li></ul> PHYSICAL REQUIREMENTS: <ul><li>This position can be required to participate in the company random or customer specific drug and alcohol screening and background check.</li><li>Ability to lift 30 lbs.</li><li>Ability to professionally handle stressful situations.</li><li>Outgoing personality to interact with entire company and customers.</li><li>Organization skills to manage multiple deadlines and priorities.</li><li>Ability to sit or stand for long periods of times, able to reach above head, bend and stand.</li><li>Able to pass a pre-employment drug, alcohol test and background check.</li><li>Must not have allergies or issues related to handling oils or metals including aluminum, copper, bronze and steel.</li></ul>ADDITIONAL RESPONSIBLITIES: Special Information (Travel required, physical requirements, background checks, valid license, on-call schedules, weekend rotations, lifting up to 30 lbs.) <ul><li>The position will be based full time in our Canastota, NY facility.</li><li>Able to understand, read, write, and speak English proficiently.</li><li>Legal to work in the United States and provide proper documentation</li></ul> WORK ENVIRONMENT: <ul><li>While performing the duties of this position, the employee will routinely enter a shop environment and will be exposed to moving mechanical parts. While the work area may be described as generally clean, safe, and "not loud", there will be machine operations that generate moderate noise and metal particles.</li></ul>

We are seeking a CNC Machinist at our Canastota, NY facility. JOB SUMMARY CNC Machinist position performs a variety of basic machining practices involved in turning, milling, drilling, and threading operations on turbomachinery components and assemblies to ensure compliance with specifications and quality requirements, ESSENTIAL FUNCTIONS: <ul><li>Operate and monitor CNC machine to ensure proper functionality.</li><li>Perform routine in-process inspections and document results in accordance with established quality control procedures.</li><li>Perform daily housekeeping and machine maintenance tasks to ensure safe/effective machine operation.</li><li>Adjust machine as needed for changeovers, different functions, or other varying needs of production.</li><li>Perform all other duties/tasks as assigned by CNC Shift Lead and/or Supervisor</li></ul> JOB REQUIREMENTS: Education: High School Diploma, GED from an accredited school or institution or equivilant years experience. Knowledge requirements: The requirements below are the minimum requirements an employee needs to fulfill this position. They are representative of the knowledge, skills and ability required for the position. <ul><li>CNC operator, minimum 3 years of experience</li><li>Manual machines and band saws</li><li>Calculate dimensions and tolerances using knowledge of mathematics and instruments such as micrometers and calipers.</li><li>Utilize hand tools and have basic mechanical abilities.</li><li>Ability to read blueprints and drawings.</li><li>Problem solving skills.</li><li>Strong hand-eye coordination</li><li>Must have positive attitude and ability to multi-task, working in a fast-paced, ever-changing environment. </li><li>Understand safe machine practice</li></ul> Other Information: Special Information (Travel required, physical requirements, background checks, valid license, on-call schedules, weekend rotations, lifting to 75 lbs.) <ul><li>The position will be based full time in our Canastota, NY facility.</li><li>Evening and weekends depending on company needs.</li><li>Able to understand, read, write, and speak English proficiently.</li><li>Legal to work in the United States</li><li>Able to pass a pre-employment drug and alcohol test, physical and background check. </li></ul> Physical Requirements <ul><li>While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift.</li><li>Ability and willingness to lift objects weighing up to 75 lbs., walk, climb, reach, kneel, crawl, and balance.</li><li>Must be able to use hands for assembly and tool usage.</li><li>This position requires repetitive motion ability.</li><li>Must not have allergies or issues related to handling metals including aluminum, copper, bronze, and steel.</li></ul> Work Environment While performing the duties of this position, the employee will be regularly exposed to moving mechanical parts. While the work area may be described as generally clean, safe, and "not loud", there will be machining operations that generate moderate noise and metal particles.

CNC Machinist

Role As a Field Service Technician (also known as Maintenance Technician, Service Engineer), you will utilize your understanding of electrical, pneumatic, and hydraulic schematics to effectively detect and resolve issues with electrical and mechanical components. Your duties will include daily travel to customer facilities, installation, commissioning, calibration, maintenance, diagnosis, and repair of CNC equipment. You will also provide operator training, software applications, preventive maintenance, major assembly replacements and alignments, overhauls/refurbishments, upgrades/retrofits, and un-installation services. You will be expected to maintain an in-depth knowledge of machine tool industry and product lines. Benefits<ul><li>Competitive starting salary.</li><li>Comprehensive Health Benefits including, Medical, Vision, Dental and Life Insurance.</li><li>401(k) retirement plan with company contribution.</li></ul>Qualifications<ul><li>Minimum of one year of experience with a machine tool builder or distributor, or as a factory maintenance technician.</li><li>Proficient verbal and written communication and customer relation skills.</li><li>Basic digital literacy and understanding of MS Word, Excel, and Outlook.</li><li>Ability to read and interpret drawings and schematics.</li><li>Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated or manual machinery.</li></ul>

CNC Field Service Technician

We are seeking a 2nd Shift CNC Machinist at our Canastota, NY facility. JOB SUMMARY CNC Machinist position performs a variety of basic machining practices involved in turning, milling, drilling, and threading operations on turbomachinery components and assemblies to ensure compliance with specifications and quality requirements, ESSENTIAL FUNCTIONS: <ul><li>Operate and monitor CNC machine to ensure proper functionality.</li><li>Perform routine in-process inspections and document results in accordance with established quality control procedures.</li><li>Perform daily housekeeping and machine maintenance tasks to ensure safe/effective machine operation.</li><li>Adjust machine as needed for changeovers, different functions, or other varying needs of production.</li><li>Perform all other duties/tasks as assigned by CNC Shift Lead and/or Supervisor</li></ul> JOB REQUIREMENTS: Education: High School Diploma, GED from an accredited school or institution or equivalent years experience. Knowledge requirements: The requirements below are the minimum requirements an employee needs to fulfill this position. They are representative of the knowledge, skills and ability required for the position. <ul><li>CNC operator, minimum 3 years of experience</li><li>Manual machines and band saws</li><li>Calculate dimensions and tolerances using knowledge of mathematics and instruments such as micrometers and calipers.</li><li>Utilize hand tools and have basic mechanical abilities.</li><li>Ability to read blueprints and drawings.</li><li>Problem solving skills.</li><li>Strong hand-eye coordination</li><li>Must have positive attitude and ability to multi-task, working in a fast-paced, ever-changing environment. </li><li>Understand safe machine practice</li></ul> Other Information: Special Information (Travel required, physical requirements, background checks, valid license, on-call schedules, weekend rotations, lifting to 75 lbs.) <ul><li>The position will be based full time in our Canastota, NY facility.</li><li>Evening and weekends depending on company needs.</li><li>Able to understand, read, write, and speak English proficiently.</li><li>Legal to work in the United States</li><li>Able to pass a pre-employment drug and alcohol test, physical and background check. </li></ul> Physical Requirements <ul><li>While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift.</li><li>Ability and willingness to lift objects weighing up to 75 lbs., walk, climb, reach, kneel, crawl, and balance.</li><li>Must be able to use hands for assembly and tool usage.</li><li>This position requires repetitive motion ability.</li><li>Must not have allergies or issues related to handling metals including aluminum, copper, bronze, and steel.</li></ul> Work Environment While performing the duties of this position, the employee will be regularly exposed to moving mechanical parts. While the work area may be described as generally clean, safe, and "not loud", there will be machining operations that generate moderate noise and metal particles.

7 Full Time Jobs in Canastota, NY 13032, USA