field_job_employment_type

field_job_occupational_field_parents_all

job_organization_name

field_job_salary_range

Job description Functions and Responsibilities: <ul> <li> Understand complex fabrications and datum sequencing on blue prints </li> <li> Be able to machine large and complex weldments </li> <li> Review set up sheet and problem solve any concerns </li> <li> Review and run right angle head program </li> <li> Run all vertical and horizontal and boring bar machines </li> <li> Understand basic vacuum set ups </li> <li> Mentor new Team Members on machine center procedures </li> <li> Use appropriate machining tools: go/no go gauges, calipers, inside micrometers, probes </li> <li> Set up, operate, and tend to preventative maintenance for CNC equipment </li> <li> Assist in programming customer's drawing into the machine using Virtual Gibbs/ G Code </li> <li> Interpret and work from complex drawing and blue prints </li> <li> Identify non-conformances during inspection of component parts and properly document such non-conformances </li> <li> Notify supervisor when work received does not meet the specifications required by previous operators </li> <li> Responsible to record an accurate log of job times and specifications for audit reports </li> <li> Maintain clean equipment/tools and work area </li> <li> Follow established safety procedures </li> </ul> Education: <ul> <li> High School/GED - required </li> <li> 1 year machining certification - preferred </li> </ul> Experience: <ul> <li> 6+ years of machining experience </li> <li> 1+ years of Haas Control - preferred </li> <li> 1+ years of Fanuc Bridge Mill Controls - preferred </li> <li> 1+ years of Tosnuc - preferred </li> </ul> Physical Demands: The physical demands described below are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to: <ul> <li> Frequently: sit, grasp/hold, fine manipulation of both hands </li> <li> Occasionally: reach at shoulder, lift/carry, and walk </li> <li> Seldom: stand, reach below shoulder, reach above shoulder </li> </ul> Percent of job performed per Hours Worked: 0% - 15% Seldom 16% - 33% Occasionally 34% - 65% Moderate 66% - up Frequently Shift: <ul> <li> 2nd Shift </li> </ul> Reasonable Accommodation Statement: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Fox Valley Metal Teach is an affirmative action/Equal Opportunity Employer of Minorities, Women, Protects Veterans and other Persons with Disabilities. Other duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the Team Member for this job. Duties, responsibilities and activities may change at any time with or without notice.

CNC MACHINIST III BORING BAR

<ul> <li>Confirm vise is true to machine and review small basic weldment</li> <li>Review set up sheet and problem solve any concerns</li> <li>Understand basic programming and work with team if concerns</li> <li>Run right angle head program</li> <li>Run all vertical machines</li> <li>Understand basic vacuum tool training</li> <li>Set up basic and advanced operations of machine centers</li> <li>Use appropriate machining tools: go/no go gauges, calipers, inside micrometers</li> <li>Set up, operate, and tend to preventative maintenance for CNC equipment</li> <li>Interpret and work from complex drawings and blue prints</li> <li>Identify non-conformances during inspection of component parts and properly document such non-conformances</li> <li>Notify supervisor when work received does not meet the specifications required by previous operators</li> <li>Responsible to record an accurate log of job times and specifications for audit reports</li> <li>Maintain clean equipment/tools and work area</li> <li>Follow established safety procedures</li> </ul> Education: <ul> <li>High School/GED - required</li> <li>1 year machining certification - preferred</li> </ul> Experience: <ul> <li>2-6 years of machining experience</li> <li>1+ years of Haas Control - preferred</li> <li>1+ years of Fanuc Bridge Mill Controls - preferred</li> </ul> Physical Demands: The physical demands described below are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to: <ul> <li>Frequently: sit, grasp/hold, fine manipulation of both hands</li> <li>Occasionally: reach at shoulder, lift/carry, and walk</li> <li>Seldom: stand, reach below shoulder, reach above shoulder</li> </ul> Percent of job performed per Hours Worked: 0% - 15% Seldom 16% - 33% Occasionally 34% - 65% Moderate 66% - up Frequently

CNC Machinist Level II Feeler

Job description Functions and Responsibilities: <ul> <li> Confirm vise is true to machine </li> <li> Review set up sheet and pulled tools </li> <li> Provide feedback after tooling is set of any concerns to team </li> <li> Run Single control and small vertical machines </li> <li> Use appropriate machining tools: go/no go gauges and calipers for inspections compare to blue print </li> <li> Set up, operate, and tend to preventative maintenance for CNC equipment </li> <li> Interpret and work from complex drawings and blue-prints </li> <li> Identify non-conformances during inspection of component parts and properly document such non-conformances </li> <li> Notify supervisor when work received does not meet the specifications required by previous operators </li> <li> Responsible to record an accurate log of job times and specifications for audit reports </li> <li> Maintain clean equipment/tools and work area </li> <li> Follow established safety procedures </li> </ul> Education: <ul> <li> High School/GED - required </li> <li> 1 year machining certification - preferred </li> </ul> Experience: <ul> <li> 1 - 3 years of machining experience </li> <li> 1+ years of Haas Control - preferred </li> </ul> Physical Demands: The physical demands described below are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to: <ul> <li> Frequently: sit, grasp/hold, fine manipulation of both hands </li> <li> Occasionally: reach at shoulder, lift/carry, and walk </li> <li> Seldom: stand, reach below shoulder, reach above shoulder </li> </ul> Percent of job performed per Hours Worked: 0% - 15% Seldom 16% - 33% Occasionally 34% - 65% Moderate 66% - up Frequently

CNC Machinist Level I

Job Summary: Operate manufacturing equipment in accordance with plant policies and procedures while ensuring smooth operations and production of parts that meet efficiency and customer requirements. Working with Makino, DMG Mori, Doosan CNC Machining. we also have 5 robotic cells. We have career path options to go from Machine Operator to Shop Lead and everything in-between. Pay Rate: $19-$30 per hour, based on experience. Accelerated pay rates and shift premiums for 2nd and weekend shifts! Essential Duties and Responsibilities: <ul><li>Load and unload castings onto fixtures in machines</li><li>Perform quality inspection checks to ensure parts are in conformance with customer specifications</li><li>Perform tooling changes as needed</li><li>Maintain accurate documentation of records</li><li>Maintain a clean and safe working environment</li><li>Follow detailed work instructions</li><li>Deburr machined parts with the use of power hand tools</li><li>Basic reading and interpreting of blue prints</li><li>Comply with all OSHA regulations, report safety issues and use proper PPE</li><li>Communicate effectively with team members, supervisors, production control, engineers, and Operations Manager</li><li>Work independently within timed deadlines</li><li>Additional duties as required</li></ul>Requirements Basic Qualifications: <ul><li>High School diploma or equivalent</li><li>0-3 years' experience in an industrial CNC machining environment operating vertical and horizontal milling machines</li><li>Basic blueprint reading</li><li>Basic math skills specifically with fractions and decimals</li><li>Mechanical aptitude with good physical dexterity</li><li>Ability to use various holders such as cutters on shell mill and shrink fit.</li><li>Ability to decipher various tooling such as cutter and engraver</li><li>Previous experience using inspection equipment to confirm part quality</li><li>Attention to detail</li><li>Basic computer skills</li></ul> Physical Demands: While performing the duties of this job, the employee is regularly required to stand, walk, stoop, crouch, bend and reach above shoulders. The employee frequently is required to use hands to manipulate objects, tools or controls; and talk and hear. The employee must frequently lift and/or move from 10 pounds to 70 pounds unassisted. Specific vision abilities required by this job include close vision, distance vision, peripheral vision and depth perception. While performing the duties of this job, the employee will be working in the typical conditions of a manufacturing environment including seasonal variation in temperatures. The employee must comply with PPE requirements including but not limited to, safety glasses, hearing protection, appropriate gloves, clothing and shields for required tasks and steel toed safety shoes. Salary Description $18-$30 per hour

4 Full Time Jobs in Ashwaubenon, WI, USA