field_remote_option

field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

field_job_salary_range

R. C. TWAY COMPANY, LLC Come join a team where People make the difference! As a part of Marmon Holdings, Inc., a highly decentralized organization, we rely heavily on people with the aptitude, attitude, and entrepreneurial spirit to drive our success, and we're committed to attracting and retaining top talent. Description: The Manufacturing Specialist is responsible for operating and programming the MultiCam CNC Router. This position will cut an array of materials in our cabinet manufacturing process, including but not limited to, melamine, laminate, plywood, polycarbonate, ceiling tiles, e-panel, butcher block, and tough board. Instruction will be taken from the supervisor on following print requirements and using various manufacturing equipment and hand tools to build and attach various parts, materials and equipment to custom trailers according to Customer Specifications. The Manufacturing Specialist will report to the Shop Team Leader and will perform any and all duties as requested. Responsibilities: <ul><li>Operating MultiCam router. Receive and retrieve cut nest files and assembly prints with material instructions from our design engineers and preform from time to time, manual programming at the machine as needed</li><li>Assemble cabinets when required to support production depending on the customer needs.</li><li>Perform daily maintenance to tools and daily clean up</li><li>Observe all operation of the machine from start up to end of shift shut down and assure that machined pieces are within the specifications set out from the design engineers prints.</li></ul><ul><li>Communicate and collaborate with build and team leads to determine timelines and priorities of work being processed within the cabinet department.</li><li>The employee will work in a safe manner while wearing the appropriate safety equipment and reporting any unsafe condition or act.</li><li>The employee will be responsible for their area of the Shop for housekeeping and organization and will utilize clean up time assigned at the end of each day to do so.</li><li>The employee will be on the job as scheduled for start, stop and break times and accurately fill out the proper information on a Job Slip at the end of each day.</li><li>The employee will conduct themselves according to the Policies of the Company as provided in the Handbook including but not limited to attendance, smoking, breaks, clean up, PTO, cell phones, etc.</li></ul>Requirements: <ul><li>Seasoned MultiCam CNC operator with 2-7 years of experience</li><li>Able to read blue prints, specifications including dimension and tolerances and tooling instructions</li><li>Able to set top and bottom limits for tooling</li><li>Carpentry, woodworking and cabinet assembly skill a plus</li><li>Able to work with hand tools to position and secure work pieces within the cabinet department standards</li><li>Detail oriented; strong attention to details</li><li>Experienced with electric and pneumatic tooling and basic hand tools</li><li>Diploma/GED</li><li>Math Skills: ability to add, subtract, multiply, divide</li><li>Able to read a tape measure</li><li>Able to stand 10hrs/day</li><li>Able to lift up to 50lbs occasionally</li><li>Able to perform repetitive tasks; high physical activity</li><li>Able to bend, kneel, stoop, stand, reach, twist, climb and/or crawl</li><li>Not afraid of heights (able to climb a 12 ft ladder)</li><li>Able to communicate (read, write, speak, listen and understand work instructions).</li><li>Pre-employment Screening</li><li>PPE: Steel-toes, and safety glasses required at all times</li></ul>Fundamental Irreplaceable Behavior Values: Interpersonal Skills: Easy to get along with; Treats all people with dignity and respect ; displays kindness; shows interest in others; gives others appreciation and encouragement; common courtesy; Always approachable; never rude; Aware of and sensitive to what other people are feeling; Is at ease with people at all levels; Does not belittle the opinions or work of other people, regardless of their status or position; Deals effectively with a diverse workforce; Demonstrates a high degree of "emotional intelligence"; Truly values and genuinely likes people; Treats others with respect and as important person; Is unselfish and meets the legitimate needs of others; Serves others. Ethics and Integrity: Admits mistakes in spite of the potential for negative consequences; Presents unpleasant or disagreeable facts in an appropriate manner; Keeps promises; meets goals and deadlines; Avoids situations and associations that could be considered inappropriate; Honest in all dealings; Upholds and models organization's values; Does what you say you will do; Is forgiving when wronged. Business Demeanor / Temperament: Displays a positive attitude and optimism about the work to be done, the people he or she works with, customers, management, and company policies; Has a constructive sense of humor; Maintains a calm temperament and pleasant demeanor; Shows self-control; Doesn't spread gossip or rumors; Acts as a positive influence on others; Is courteous, patient, cooperative, and helpful; Is humble, never boastful or arrogant. Accountability: Accepts personal responsibility for the quality and timeliness of his/her work; Acknowledges and corrects mistakes; Doesn't make excuses or blame others for errors or problems; Carries his/her fair share of the workload; Does what he/she commits to doing. Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to <a href="mailto:careers@marmon.com" target="_blank">careers@marmon.com</a>, and please be sure to include the title and the location of the position for which you are applying.

Mfg Specialist /CNC Operator KTSV Wixom, MI

Responsibilities PURPOSE OF POSITION: Fabricate, position and form structural metal/fiberglass products. MAJOR RESPONSIBILITIES: • Use and conduct proper care of PPE. • Sets up and operates fabricating machines, such as brakes, rolls, shears, saws, and presses, to cut, bend, straighten, and form metal/fiberglass plates, sheets and structural shapes according to blueprints and specifications. • Reads and interprets blueprints, engineering specifications, and shop orders to determine machine setup, production methods, and sequence of operation. • Selects, positions, and secures dies, blades, cutters, and fixtures onto machine, using rule, square, shims, templates, hand tools, and built-in gauges. • Starts machine and observes machine operation to reposition work piece, change dies, or adjust machine settings for multiple or successive passes. • Inspects or measures work, using rule, gauges, and templates. • Lifts work piece manually or with hoist, and positions and secures it on machine table in drilling jig or holding fixture. • Moves machine controls to feed tools into work piece, and engages automatic feed or manually holds. • Observes machine operation, and verifies conformance of work piece to specifications, using fixed gauges, calipers, and micrometers. • Changes worn cutting tools, using wrenches. • Moves controls to adjust cutting speeds, feed rates, and depth of cut. • Support the Altec Production System (APS). • Follow established safety, environmental and quality policies, procedures and practices. • Maintain work area and shop tools/equipment. • Maintain daily time records. • Other job duties as assigned. • Job duties may vary by location. EDUCATION, EXPERIENCE, AND SKILLS REQUIRED: • High School Diploma/GED required. • Vocational training in lieu of experience would be considered • Ability to read, write, and comprehend required. • Basic computer usage knowledge required. • Ability to use measuring equipment and read blue prints and schematics required. • General knowledge of at least one of the following desired o Mechanical o Manufacturing / Production processes OTHER POSITION SPECIFICATIONS: • Ability to obtain forklift certification if required. • Keep a clean work area (5S). • Assist co-workers as needed. • May participate in RCI events. • May be required to learn Altec programs and/or systems. • Shift work may be required. Responsibility for Safety: • Safety In everything we do Responsibility to Prevent Errors: • Ensures appropriate reviews have been performed as needed for high quality Mental Alertness: • Continuous attention to all job functions ensuring quality products Communication with Others: • Requires outside and inside contacts to carry out company policy and programs; Improper handling will have considerable effect on operational results; Must often deal with matters requiring explanation, persuasion and obtaining of approvals 2 years of manufacturing experience preferred This job level is able to be adjusted at time of hire, if the candidate meets the qualifications for jobs of a more experienced level in the career path. Benefits Altec offers a competitive salary that rewards performance and dedication, along with a comprehensive benefits package that includes: <ul> <li>Medical, Dental, Vision and Prescription Drug Program</li> <li>Retirement 401(k) Traditional or Roth Program Options with Company Match</li> <li>Vacation and Holidays</li> <li>Parental Leave</li> <li>Short Term and Long Term Disability Leave</li> <li>Flexible Spending Accounts</li> <li>Tuition Assistance Program</li> <li>Employee Assistance and Mental Health/Substance Abuse Program</li> <li>Life Insurance, Accidental Death and Dismemberment Insurance</li> <li>Supplemental Insurance including Hospital Indemnity, Critical Illness and Accident Insurance</li> <li>Additional Wellness Programs and Rewards Available</li></ul> Why Join Altec? If you're considering a career with Altec, there's never been a better time to join us! Our company was founded on values that place the customer first and prioritize our people as our greatest strength. Over the years, those values and our talented associates have helped us to earn the trust and confidence of customers worldwide. Today, Altec is an innovative, financially sound company that sets the standard of excellence in design, manufacturing and service - and that's why we're the ideal place for you to grow your career. Founded in 1929, Altec is a privately held company headquartered in Birmingham, Alabama. Altec specializes in the manufacture, sale and service of aerial devices, digger derricks, cranes and specialty equipment for the electric utility, telecommunications, tree care, construction, and light and signs markets. We help our customers dig deeper and reach higher in more than 100 countries around the world. Please join us for open interviews every Friday from 11 a.m. to 3 p.m. at the Burnsville Body Plant (150 Altec Drive, Burnsville NC, 28714). EEO Statement Altec Industries, Inc. and its affiliates are equal opportunity employers and maintain affirmative action plans to recruit, retain, develop, and promote qualified individuals without unlawful consideration of race, gender, color, religion, sexual orientation, gender identity, national origin, age, disability, citizenship status, veteran status, or any other characteristic protected by federal, state or local law. Altec strives to maintain a work environment free from unlawful discrimination and harassment, where associates are treated with respect and dignity.

CNC Laser & Press Brake Operator

CNC OPERATOR (Program &amp; SETUP - RUN 4)- 2ND SHIFT ABOUT OUR COMPANY SUHNER USA, Inc. is a Swiss-owned corporation founded in the US in 1976. We are part of the SUHNER group of companies, a 100-year-old family-owned company based in Switzerland. SUHNER's strengths and expertise extends across three key areas: (1.) Tools/abrasives (2) Machining and (3) Material expertise for metal. SUHNER is the worldwide leader in the realm of manufacturing designed to help our customers unlock maximum value, improve product performance, optimize manufacturing processes, and stay one step ahead of the competition. In doing so, SUHNER focus' on the flawless manufacturing of flexible shafts for the Automotive, Industrial, Medical, and Lawn and Garden Industries. Today, we are operating a 60,000 sq. ft. manufacturing plant in Rome, GA. To learn more about SUHNER, please visit our website @ <a href="http://www.suhner.com" target="_blank">www.suhner.com</a> WHAT WE HAVE TO OFFER <ul><li>Compensation package (based upon experience)<ul><li>$21.00 - $24.00</li></ul></li><li>Full time/Hourly/Paid Weekly</li><li>Health, dental, life, vision insurance</li><li>Company paid life insurance</li><li>HSA (Health Savings Account)</li><li>401k plan with up to 7% Employer contribution (after one year of full-time employment)</li><li>Vacation/Benefit Time (personal days, sick time)</li><li>Nine (9) Paid Holidays</li><li>Employee referral program</li></ul> WHAT ARE WE LOOKING FOR? SUHNER USA, Inc. is seeking to fill the full-time CNC Operator on 2nd shift, located at our facility in Rome, GA. BASIC FUNCTION The function of the 2nd shift CNC Operator is to ensure all available machines can continue to run throughout 2nd shift and into third shift. PRIMARY DUTIES Novice <ul><li>Follow production orders as assigned by the supervisor.</li><li>Perform other functions related to the machine shop.</li><li>Maintain a safe and neat work environment and clean at the end of the shift.</li><li>Maintain an acceptable quality output per production order.</li><li>Able to understand basic drawings and measuring tools to confirm compliance.</li><li>Weigh count the completed parts production ran to verify quantity.</li><li>Deliver the finished machined parts to the Quality Control Shelf for final inspection</li></ul> Setup and Run Two <ul><li>Setup and run per work instructions to achieve the required specification, quality and quantity expectations as directed by the Supervisor.</li><li>Acquire all necessary tooling such as collets, drill chucks, end mills, drill bits, reamers, etc., and setup machine per instructions.</li><li>Prepare material for the appropriate machine in accordance with engineering specifications, procedures and work instructions including documentation of lot numbers for materials.</li><li>Ability to understand complicated drawings and measuring tools to confirm compliance.</li></ul>Program &amp; Setup and Run Four <ul><li>Setup and run per work instructions to achieve the required specifications, quality and quantity expectations as dictated by the department supervisor.</li><li>Pull up program for machine and refer to set-up instructions to be the first part run.</li><li>Prepare material for the appropriate machine in accordance with engineering specifications, procedures and work instructions including documentation of lot numbers for materials.</li><li>Acquire all necessary tooling such as collets, drill chucks, end mills, drill bits, and reamers, etc., and setup machine per instructions.</li><li>Measure all dimensions per drawing specifications.</li></ul>Setup and Run All Machines: <ul><li>Setup and run per work instructions to achieve the required specifications, quality and quantity expectations as directed by the department supervisor.</li><li>Prepare material for the appropriate machine in accordance with engineering specifications, procedures and work instructions including documentation of lot number for materials.</li><li>Acquire all necessary tooling such as collets, drill chucks, end mills, drill bits and reamers, etc., and setup machine per instructions</li></ul>Expert: <ul><li>Program and setup and run any machine per work instructions to achieve the required specifications, quality and quantity expectations as directed by the department supervisor.</li><li>Prepare material for the appropriate machine in accordance with engineering specifications, procedures and work instructions including documentation of lot number for materials.</li><li>Pull up program for machine and refer to setup instruction to begin the first part run.</li><li>Acquire all necessary tooling such as collets, drill chucks, end mills, drill bits and reamers, etc., and setup machine per instructions.</li><li>Measure all dimensions per drawing specifications.</li></ul>KNOWLEDGE/EXPERIENCE <ul><li>High school diploma or GED preferred and/or Machine Tool Technology Certificate.</li><li>Ability to read and understand drawings, work instructions and other documents related to the job</li><li>Write legibly</li><li>Perform basic math operations (add, subtract, multiply, and divide) with and without use of calculator</li><li>Ability top measure product using micrometers, calipers, scales, thread pitch gauges, thread micrometers, blade micrometers, depth micrometers, height gauge, core micrometers, etc.</li><li>Ability to operate digital scales for weighing of product.</li><li>Able to operate relatively complex production CNC machinery in addition to, the ability to operate manual lathes, milling machines and surface grinders, performing multiple interrelated operations and adjustments per drawing.</li><li>Willingness to be flexible and adjust to a changing work environment.</li><li>Demonstrated ability to work independently, organize and accurately prioritize work. Understand when urgency is required and use good judgment in varied situations.</li></ul>PHYSICAL DEMAND OF JOB <ul><li>Stand for at least two (2) hours without resting</li><li>Lift at least 50 lbs. unassisted; greater than 50 lbs. assisted</li><li>Ability to push and/or pull carts and pallet jacks</li><li>Ability to ben and stoop to the floor</li></ul>

CNC OPERATOR 2ND SHIFT

Job Type Full-time Description About Generant: Initially founded in the early 1930's, Generant designs and manufactures valves and pressure regulators for a wide variety of industries with a strong position in the Industrial Gases and Cryogenics, Medical Gases and Equipment, Energy, and Chemicals markets. Generant is 100% employee-owned and is headquartered in Butler, NJ. For more information, please visit our site: generant.com THIS IS FOR A 2ND SHIFT SCHEDULE - Monday - Friday: 03:00PM - 11:30PM Job Summary: The primary function of the 2nd Shift Lead CNC Machine Operator is to operate and load bars into the CNC machines in a productive, high quality, and safe manner, troubleshoot and assist Machine Operators on shift. They are also responsible for maintaining safe, clean machines and work environment. The Lead CNC Machine Operator is a driven, experienced CNC Machine Operator with goals to grow into a shift supervisor. Essential Functions • Functional understanding on how to read engineering drawings • Understand and confirm proper paperwork, tools, gages, and bar stock material are present for the job • Inspect parts using the visual comparator, caliper, eye loop, appropriate gages, and instruments ensuring machine is producing accurate, quality parts • Perform visual inspection of parts for burrs, chatters, chamfer irregularities, tits, hexes, surface finish, etc. always confirming with engineering print and first part inspection sample • Assign machines to operators based on their skill level and capabilities to optimize spindle uptime. • Assist operators with offset adjustments • Troubleshoot machines and bar feeders to maintain production efficiency • Support the team with inspections when necessary to ensure a high level of quality • Assist with operator training • Work with minimal supervision • Ensure smooth transition of job requirements from CNC Setup personnel to CNC Operators and from shift to shift • Monitor and enforce Operator performance by working alongside Operators • Be known and available for Operator questions in order to ensure machines are kept running and producing quality parts • Verify Operator production reporting is accurate • Identify and report machine repair and maintenance issues and prioritize those within the CNC department for the maintenance department • Monitor and enforce Company quality, job requirement and safety policies and procedures ensuring a productive, safe working environment • Ensure Operators are equipped with eye loops and calipers to do their job • Maintain clean and safe working environment including segregation and proper disposal of scrap material • Suggest process improvements and equipment purchases • Interact with other areas in the company to accomplish timely workflow • Comply with and promote Company Quality and Safety Policies and Strategic Business Objectives • Perform other assignments as required Requirements Qualifications: Experience/Education/Skills • High School Diploma or equivalent • A minimum of 3 years of experience working with CNC machines and metal part production is required • Able to read and interpret engineering drawings • Must have a complete knowledge of metrology equipment and their uses including micrometers, calipers, indicators, depth micrometers, gauge pins, thread gauges and optical comparators • Basic computer skills including Microsoft Office applications Language Skills: • Fluent in English and have the ability to communicate to convey information clearly to a multi-lingual production staff Mathematical Skills: • Advanced Math Skills (statistics, basic accounting) Reasoning Ability: • Ability to carry out detailed, involved written and verbal instructions Physical Demands: Must frequently lift up to 25 pounds and occasionally lift up to 50 pounds When performing the duties of this job, the employee is regularly required to walk, use hands to finger or handle or feel objects and tools or controls and talk or hear Employee is frequently required to reach with hands and arms Employee is required to monitor workflow of all personnel in the CNC Area Specific vision abilities require close vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Must be able to handle several tasks at the same time under time constraints Work Environment: CNC Operator Supervisor will work throughout the Company and will be exposed to high pressure gas, heated and moving mechanical parts and is occasionally exposed to vibration Noise level is moderate for a manufacturing plant Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Generant strives to hire folks that have a pleasant, professional demeanor, are eager to learn, and have a passion for manufacturing Benefits: Medical, Dental, Vision, Employee Stock Ownership Plan (ESOP), 401k, Life and AD&amp;D Insurance Please note that this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

CNC Operator - Lead

CNC Machine Operator Customer Driven, Employee Inspired. We are seeking a skilled CNC Machine Operator to join our team. The ideal candidate will want to inspire continued company growth by striving for quality and the 'whatever it takes' attitude to ensure our customer's parts are right the first time and every time. Responsibilities: <ul><li>- Manage CNC machines to produce quality parts according to specifications</li><li>- Monitor machine operation to ensure proper functioning and make adjustments as necessary</li><li>- Inspect finished products for accuracy and quality</li><li>- Troubleshoot issues with the machines and perform regular maintenance</li><li>- Maintain a clean and safe work environment</li><li>- Follow all safety procedures and guidelines</li></ul> Requirements: - Proven experience as a CNC Machine Operator or similar role - Strong attention to detail and ability to read technical drawings - Excellent problem-solving skills - Ability to work independently and as part of a team This position offers competitive pay and benefits, as well as opportunities for growth and advancement in the manufacturing industry. If you have the skills and experience required for this role, we encourage you to apply. JOB CODE: CNC Operator

CNC Machine Operator

With this position at Prolec-GE Waukesha you will enjoy a highly competitive pay as well as: <ul><li>A leading edge benefit package that includes major medical, dental and vision options</li><li>401-K retirement plan participation w/company match</li><li>Company paid Accident &amp; Sickness plan, Company paid Life &amp; ADD insurance options</li><li>Quarterly local bonus plan participation</li><li>Educational reimbursement opportunities as well as other benefit offerings</li><li>Ask about the limited time $1500.00 sign-on bonus opportunity!!!</li></ul> JOB SUMMARY To setup, operate, load and unload CNC machines to produce parts that will achieve optimum quality and efficiency levels while meeting the requirements of the engineering design. This is a third shift position PRINCIPLE DUTIES AND RESPONSIBILITIES <ul><li>Interprets and understand simple and complex part drawings.</li><li>Uses precision measuring tools such as micrometers, Vernier's, scales, protractors, compass, height gage, dial indicators, etc. </li><li>Uses machine control codes, computers, and part nesting, DNC links, and file transfers to produce parts.</li><li>Utilizes machine control capabilities to make simple part programs, prove out programs and edit programs as a normal part of the setup and operation of CNC machines and related equipment.</li><li>Performs normal operator maintenance as prescribed by equipment builder to include the replacement of consumable materials and parts. </li><li>Performs multiple activities simultaneously, organizes work, and takes corrective action in response to error messages and/or process interruptions. </li><li>Assists with supervision in the training of other machine operators and helpers. </li><li>Diagnoses machine problems and repair of the machines. </li><li>Assumes leadership role and takes responsibility for overall performance of equipment.</li><li>Meets production standards by monitoring machine performance to include managing up time and quality standards. Use of punch dies and pressures used in the hydraulic forming of steel and alloys. </li><li>Very proficient at performing oxy/fuel flame and plasma cutting, part layout, inspection, hole drilling, tapping and milling to include an understanding of speed and feed rates. </li></ul><ul><li>Reads, understands, and follows guidelines set forth by E.I.s, M.P.s, S.P.s, O.I.C.s, and blueprints when performing assigned work.</li><li>Comply with all safety policies and procedures and actively participate in defined zero harm safety culture driven initiatives.</li></ul> KNOWLEDGE, SKILLS &amp; ABILITIES TOOLS AND MACHINERY CNC machines such as saws, press brake, manual mills, plasma cutter and CNC Flex machine. Tools include micrometers, Vernier's, scales, protractors, compass, height gage, dial indicator, tape measure, go-no-go gauges and squares. MATERIALS Personal protective equipment to include safety glasses, steel toed shoes, hearing protection, welding apron, face shield, and appropriate gloves. GENERAL Works under minimal supervision. Must be a self-starter with excellent problem solving and decision making skills. Acts decisively with a sense of urgency to maximize machine production and minimize down time. Strong knowledge of mathematics, to include geometry, to determine unknown part dimensions and/or relationships. Knowledge of metal types and characteristics. Understanding of the part use, fit and function as well as the manufacturing processes utilized is essential. Experience working with computers and machine controls. EDUCATION AND EXPERIENCE High school diploma or G.E.D. equivalent ADDITIONAL INFORMATION The above description covers the principle functions of the job. It is not intended to be a complete listing of all the miscellaneous, incidental, or substantially similar duties, which may be assigned during normal or emergency operations. Prolec-GE Waukesha, Inc. is an equal opportunity employer and makes employment decisions without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, genetic information, disability, protected veteran status, or any other reason prohibited by applicable law

CNC/Machine Operator

Are you a master of precision? Can you turn raw material into perfectly crafted components? If so, we want YOU to be part of our cutting-edge team! At Oberg Industries we pride ourselves on creating top-quality precision products using the latest in CNC technology. As a CNC Lathe Operator you will play a key role in turning ideas into reality - from aerospace parts to customed machined components. This isn't just another job, it is a career where your skills are valued, and your work truly matters! Job Summary: As a CNC Lathe Operator, you will be responsible for operating and maintaining CNC lathes to produce high-quality metal components according to engineering specifications. The ideal candidate will have strong attention to detail, experience with CNC machinery, and the ability to work independently in a fast-paced environment. Key Duties and Responsibilities: <ul><li>Set up and operate CNC lathe equipment to produce precision parts from blueprints and specifications. </li><li>Use your expertise to inspect parts with precision measuring tools (calipers, micrometers, gauges) ensuring pieces meet our high-quality standards. </li><li>Review and modify CNC programs to maximize efficiency and accuracy.</li><li>Monitor machines performance, make adjustments, and troubleshoot any issues that arise.</li><li>Provide recommendations to enhance operational efficiency.</li><li>Track and log time spent on each job.</li><li>Understand the application of various cutters and have the ability to determine correct feeds and speeds for those cutters optimal performance.</li><li>Identify, diagnose, and resolve equipment and system issues using test equipment and relevant work experience.</li><li>Other related duties as assigned.</li></ul>Educational Qualifications and Specific Skills: <ul><li>High school diploma or equivalent preferred.</li><li>Successful completion of the apprenticeship program or equivalent experience required.</li><li>Must be able to read and understand blueprints and engineering drawings. Knowledge of GD&amp;T preferred. </li><li>Knowledge of algebra and trigonometry preferred. </li><li>Must be able to communicate through written, verbal, or other means of communication.</li><li>Must be a U.S. citizen or be able to comply with U.S. export regulations. </li><li>Must be able to wear personal protection equipment, such as earplugs, safety glasses, and safety shoes.</li></ul>Working Conditions: While performing the duties of this job, the employee is regularly required to work in a standing, sitting, or bent position for 10 hours/day and must be able to lift a maximum of 35 pounds with control and unassisted. The employee must be able to raise arms above shoulders and maintain dexterity for extended periods of time and use hands to handle or feel objects, tools, or controls; reach with hands and arms; and be able to stoop or kneel for excessive periods of time. The employee must be able to perform the physical demands of the job with or without reasonable accommodation. The employee must be able to wear personal protective equipment. The employee is frequently around large industrial machinery, and the employee constantly works near moving mechanical parts that create a moderately high noise level. This position requires on-site work. Remote work options are not available. Benefits: <ul><li>Competitive Pay </li><li>Overtime Pay (after 8 hours per day worked)</li><li>20% shift differential </li><li>Medical, Dental and Vision Insurance (no premiums paid)</li><li>Medical benefit opt-out with Reimbursement option.</li><li>Health Savings Account (HSA)</li><li>Short &amp; Long Term Disability (company paid, no contribution)</li><li>Death Benefit</li><li>401K Retirement Plan (with 4% employer match)</li><li>Employer Profit Sharing program</li><li>Quarterly Bonus Program (based on company performance)</li><li>Paid Time Off (earning up to 5 weeks)</li><li>9 Paid Holidays </li><li>Temperature-Controlled Work Environment</li></ul> We also offer a family-friendly atmosphere and a number of perks for our employees such as Employee Referral Program Incentive Pay, Food Truck days, Health Club Membership Reimbursement, Tool Purchase program, Training and Development opportunities and much, much more!! Oberg Industries is a local, family-owned, contract manufacturer and supply chain integrator providing tooling/metal stamping and precision machining services to many well-known companies around the world. Our passion is for precision manufacturing and our breadth of expertise enables us to provide cost-effective manufacturing solutions for the most demanding and complex production challenges for customers across the globe. Oberg Industries skilled employees stamp, grind, mill, turn, machine and design customized components and assemblies found in countless items that improve the quality of life for millions of people every day. Our most competitive advantage is our skilled and innovative workforce. Oberg employees are among the best trained in the industry, supported by a culture of continuous learning that includes cross-training, apprenticeships, and advancement opportunities. Each employee plays a pivotal role in our ability to produce high quality parts. For more information about the company visit: <a href="http://www.oberg.com" target="_blank">www.oberg.com</a>. It is our commitment at Oberg Industries to create a diverse environment and we are proud to be an equal opportunity employer. EOE, including disability/vets.

CNC Lathe Operator

Date Posted: 2024-09-17 Country: United States of America Location: PW105: North Berwick Wells Road, Route 9, North Berwick, ME, 03906 USA Position Role Type: Onsite Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. Innovation through diversity of thought. At Pratt &amp; Whitney, we believe diversity of thought enables creativity, innovation, and a foundation for inclusion. By fostering an inclusive culture, we accept a shared accountability and responsibility to recognize, sponsor, coach, hire and promote talent equally. We welcome our employees to be their whole - best - selves at work because trust, respect and integrity, are a part of our DNA. At Pratt &amp; Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? What You Will Do Amazing Opportunity on the 3rd shift in our Machining Department. Sunday-Thursday, 11:30pm-7:00am , work 7 hours a night and get paid for 8. Set up and operate NC milling machines, vertical turret lathes or VTC's to perform routine production operations on a variety of similar weldments and assemblies. Work from operation sheets, part travelers, BOROPS, and oral instruction to set up equipment for turning, facing, boring and chamfering operations involving a limited number of surfaces to be machined. Verify conformance of finished work to specifications using precision measuring instruments. Maintain Operator Certification to be able to accept/reject parts. Maintain machines by performing required total preventive maintenance (TPM) Work with engineers, quality assurance, programmers and other production personnel or others to resolve machining problems and assist in part process development. May be assigned to carry out tasks not specifically listed, within the scope and skill level of this job description in support of department objectives. What You Will Learn <ul><li>Learn different Machining techniques.</li><li>Multiple Types of machines, CNC turning, Grinding, Assembling/Disassembling</li></ul>Qualifications You Must Have High School or GED 1 + years of related experience, or a completed degree/certificate from a post-secondary or vocational school in a related field with 0-1+years related experience U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract Qualifications We Prefer Ability to make computations involving decimals and fractions Ability to set up machines, troubleshoot, do standard walk-arounds and inspect own work Ability to manage multiple competing priorities simultaneously What We Offer Bonus Plan - eligible to participate in the Company's Aerospace Variable Plan (AVP) Comprehensive Benefits Program - medical, dental, vision and life insurance Paid time off including vacation, personal/sick time, and holidays Additional Leaves including short-term &amp; long-term disability, parental leave, bereavement leave, jury duty coverage, and military leave Savings &amp; Investment Plan with company match &amp; employer contributions Flexible savings and spending accounts Employee Assistance Program with onsite and referral resources to support a Healthy You Employee Scholar Program - one of the most comprehensive company-sponsored employee education programs in the world (No waiting period!) Employee discounts and rebates program Learn More and Apply Today Must be a U.S. Citizen. This position may require access to systems/tools that are restricted to individuals who possess US citizenship What is my role type? In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee's personal responsibility. #reempowerprogram This role is also eligible for the Re-Empower Program. The Re-Empower Program helps support talented and committed professionals as they rebuild their capabilities, enhance leadership skills, and continue their professional journey. Over the course of the 14-week program, experienced professionals will gain paid, on-the-job experience, have an opportunity to participate in sessions with leadership, develop personalized plans for success and receive coaching to guide their return-to-work experience. Upon completion of the program, based on performance and contributions participants will be eligible for a career at RTX. Minimum Program Qualifications: • Be on a career break of one or more year at time of application • Have prior experience in functional area of interest • Have interest in returning in either a full-time or part-time position Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Machining Cell Operator, 3rd Shift  (Onsite)

Date Posted: 2024-09-17 Country: United States of America Location: PW105: North Berwick Wells Road, Route 9, North Berwick, ME, 03906 USA Position Role Type: Onsite Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. Innovation through diversity of thought. At Pratt &amp; Whitney, we believe diversity of thought enables creativity, innovation, and a foundation for inclusion. By fostering an inclusive culture, we accept a shared accountability and responsibility to recognize, sponsor, coach, hire and promote talent equally. We welcome our employees to be their whole - best - selves at work because trust, respect and integrity, are a part of our DNA. At Pratt &amp; Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? What You Will Do Amazing Opportunity on the 2nd shift in our Machining Department. Monday-Thursday, 4 day work week , 3:30pm-1:30m Set up and operate NC milling machines, vertical turret lathes or VTC's to perform routine production operations on a variety of similar weldments and assemblies. Work from operation sheets, part travelers, BOROPS, and oral instruction to set up equipment for turning, facing, boring and chamfering operations involving a limited number of surfaces to be machined. Verify conformance of finished work to specifications using precision measuring instruments. Maintain Operator Certification to be able to accept/reject parts. Maintain machines by performing required total preventive maintenance (TPM) Work with engineers, quality assurance, programmers and other production personnel or others to resolve machining problems and assist in part process development. May be assigned to carry out tasks not specifically listed, within the scope and skill level of this job description in support of department objectives. What You Will Learn <ul><li>Learn different Machining techniques.</li><li>Multiple Types of machines, CNC turning, Grinding, Assembling/Disassembling</li></ul>Qualifications You Must Have High School or GED 1 + years of related experience, or a completed degree/certificate from a post-secondary or vocational school in a related field with 0-1+years related experience U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract Qualifications We Prefer Ability to make computations involving decimals and fractions Ability to set up machines, troubleshoot, do standard walk-arounds and inspect own work Ability to manage multiple competing priorities simultaneously What We Offer Bonus Plan - eligible to participate in the Company's Aerospace Variable Plan (AVP) Comprehensive Benefits Program - medical, dental, vision and life insurance Paid time off including vacation, personal/sick time, and holidays Additional Leaves including short-term &amp; long-term disability, parental leave, bereavement leave, jury duty coverage, and military leave Savings &amp; Investment Plan with company match &amp; employer contributions Flexible savings and spending accounts Employee Assistance Program with onsite and referral resources to support a Healthy You Employee Scholar Program - one of the most comprehensive company-sponsored employee education programs in the world (No waiting period!) Employee discounts and rebates program Learn More and Apply Today Must be a U.S. Citizen. This position may require access to systems/tools that are restricted to individuals who possess US citizenship What is my role type? In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee's personal responsibility. #reempowerprogram This role is also eligible for the Re-Empower Program. The Re-Empower Program helps support talented and committed professionals as they rebuild their capabilities, enhance leadership skills, and continue their professional journey. Over the course of the 14-week program, experienced professionals will gain paid, on-the-job experience, have an opportunity to participate in sessions with leadership, develop personalized plans for success and receive coaching to guide their return-to-work experience. Upon completion of the program, based on performance and contributions participants will be eligible for a career at RTX. Minimum Program Qualifications: • Be on a career break of one or more year at time of application • Have prior experience in functional area of interest • Have interest in returning in either a full-time or part-time position Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Machining Cell Operator, 2nd shift (Onsite)

About the Role Basic Purpose Currently the position involves set-up and operation of CNC Keyway Milling machines and Vertical Rise Broaches on 3rd shift and other machines when needed. Pay: $22/hr Shift: 3rd Shift Education: Certification or Degree in Machine Tool Technology or Mechatronics preferred. Top Skills &amp; Abilities being sought for this position: <ul><li>Ability to follow instructions, written and verbal.</li><li>Ability to read blueprints.</li><li>Ability to use gauges and other measuring equipment to ensure quality work.</li><li>Have experience setting up and operating CNC equipment. (2 years preferred) Experience with robotics is a plus.</li><li>Ability to perform physical activity associated with operation of equipment including bending, twisting, lifting, pushing, pulling, and reaching in order to meet production needs.</li><li>Must be able to stand and move continuously during working hours.</li><li>Must be able to move material to and from workstation using fork truck or overhead crane.</li></ul>Top Actual Tasks for this position: <ul><li>Set-up and operate Automated Vertical Rise Broaches, and Fanuc Robodrill Machines.</li><li>Must be able to use all gauges to complete inspection of parts.</li><li>Must comply with all current ISO Quality and Work Instructions for job, all Company Safety rules, and all other Company rules, policies and procedures.</li><li>Assess each situation and do not perform any tasks which s/he feels is unsafe, on which s/he has not received training, or engage in any unsafe work practices. Report any unsafe condition to his/her manager.</li><li>Read and understand supporting documentation for the work area, and properly use and maintain the equipment.</li><li>Rotate to various jobs within Manufacturing Shop.</li><li>Perform other tasks as requested.</li></ul>Although we have described above what we are generally looking for, we are very likely missing other attributes and skills that may make you a great fit! Please tell us about your other skills and abilities by applying and listing your additional attributes. A 10% shift premium is paid for 2nd and 3rd shift positions. SEW-EURODRIVE provides a generous benefits package to all full time employee. These benefits start on DAY ONE! There is no monthly premium required for Employee's coverage: • Medical Insurance - Includes Medical, Dental, Vision, Audio, and Prescription Drug coverage + $125 annual reimbursement for purchase of eligible vitamins &amp; minerals • Life Insurance worth 2.5 times annual base pay. Includes Accidental Death &amp; Dismemberment • Disability - Includes both Short Term Disability and Long Term Disability • Flexible Spending Account (FSA) for Medical and/or Dependent Care Made available annually during open enrollment • Timely Evaluations with potential for a pay increase - New Employees are evaluated every six months for the first two years then annually thereafter • Paid Vacation - 2-weeks of vacation accrual per year to start, which increases after five years and ten years of service • Holiday Pay - Twelve (12) paid holidays per year • Retirement Benefits - Includes 401(k) with Profit Sharing Contribution and 200% Company Match on the first 3% that you defer to your 401K account • Additional Paid Time Off (PTO) for hourly positions - Unused time is paid out annually • Paid Parental Leave - To assist and support new parents with balancing work and family matters • Onsite Clinic Services - On location medical services by licensed providers at no cost to employees • Education Assistance Programs - Student Loan Repayment / Tuition Assistance options • Counseling Resources - Easy and convenient access to professional counseling services online • Wellness Resources - Utilizing a comprehensive, interactive, and personalized wellness program with potential to earn points for awards / gift cards • Uniforms and Subsidies - Uniforms (for shop employees) are provided and a subsidy for the annual purchase of safety shoes is included • Employee Assistance Programs - Five programs to help employees navigate challenging life circumstances • Insure Choice Plan Group Discounts - Auto, Home, Pet coverage, Legal insurance, and more at a group discount rate Additional job requirements and responsibilities would be discussed during the interview process.

216 CNC Operator Full Time Jobs