Mfg Specialist /CNC Operator KTSV Wixom, MI

R. C. TWAY COMPANY, LLC

Come join a team where People make the difference! As a part of Marmon Holdings, Inc., a highly decentralized organization, we rely heavily on people with the aptitude, attitude, and entrepreneurial spirit to drive our success, and we're committed to attracting and retaining top talent.

Description:

The Manufacturing Specialist is responsible for operating and programming the MultiCam CNC Router. This position will cut an array of materials in our cabinet manufacturing process, including but not limited to, melamine, laminate, plywood, polycarbonate, ceiling tiles, e-panel, butcher block, and tough board. Instruction will be taken from the supervisor on following print requirements and using various manufacturing equipment and hand tools to build and attach various parts, materials and equipment to custom trailers according to Customer Specifications. The Manufacturing Specialist will report to the Shop Team Leader and will perform any and all duties as requested.

Responsibilities:

• Operating MultiCam router. Receive and retrieve cut nest files and assembly prints with material instructions from our design engineers and preform from time to time, manual programming at the machine as needed
• Assemble cabinets when required to support production depending on the customer needs.
• Perform daily maintenance to tools and daily clean up
• Observe all operation of the machine from start up to end of shift shut down and assure that machined pieces are within the specifications set out from the design engineers prints.

• Communicate and collaborate with build and team leads to determine timelines and priorities of work being processed within the cabinet department.
• The employee will work in a safe manner while wearing the appropriate safety equipment and reporting any unsafe condition or act.
• The employee will be responsible for their area of the Shop for housekeeping and organization and will utilize clean up time assigned at the end of each day to do so.
• The employee will be on the job as scheduled for start, stop and break times and accurately fill out the proper information on a Job Slip at the end of each day.
• The employee will conduct themselves according to the Policies of the Company as provided in the Handbook including but not limited to attendance, smoking, breaks, clean up, PTO, cell phones, etc.

Requirements:

• Seasoned MultiCam CNC operator with 2-7 years of experience
• Able to read blue prints, specifications including dimension and tolerances and tooling instructions
• Able to set top and bottom limits for tooling
• Carpentry, woodworking and cabinet assembly skill a plus
• Able to work with hand tools to position and secure work pieces within the cabinet department standards
• Detail oriented; strong attention to details
• Experienced with electric and pneumatic tooling and basic hand tools
• Diploma/GED
• Math Skills: ability to add, subtract, multiply, divide
• Able to read a tape measure
• Able to stand 10hrs/day
• Able to lift up to 50lbs occasionally
• Able to perform repetitive tasks; high physical activity
• Able to bend, kneel, stoop, stand, reach, twist, climb and/or crawl
• Not afraid of heights (able to climb a 12 ft ladder)
• Able to communicate (read, write, speak, listen and understand work instructions).
• Pre-employment Screening
• PPE: Steel-toes, and safety glasses required at all times

Fundamental Irreplaceable Behavior Values:

Interpersonal Skills: Easy to get along with; Treats all people with dignity and respect ; displays kindness; shows interest in others; gives others appreciation and encouragement; common courtesy; Always approachable; never rude; Aware of and sensitive to what other people are feeling; Is at ease with people at all levels; Does not belittle the opinions or work of other people, regardless of their status or position; Deals effectively with a diverse workforce; Demonstrates a high degree of "emotional intelligence"; Truly values and genuinely likes people; Treats others with respect and as important person; Is unselfish and meets the legitimate needs of others; Serves others.

Ethics and Integrity: Admits mistakes in spite of the potential for negative consequences; Presents unpleasant or disagreeable facts in an appropriate manner; Keeps promises; meets goals and deadlines; Avoids situations and associations that could be considered inappropriate; Honest in all dealings; Upholds and models organization's values; Does what you say you will do; Is forgiving when wronged.

Business Demeanor / Temperament: Displays a positive attitude and optimism about the work to be done, the people he or she works with, customers, management, and company policies; Has a constructive sense of humor; Maintains a calm temperament and pleasant demeanor; Shows self-control; Doesn't spread gossip or rumors; Acts as a positive influence on others; Is courteous, patient, cooperative, and helpful; Is humble, never boastful or arrogant.

Accountability: Accepts personal responsibility for the quality and timeliness of his/her work; Acknowledges and corrects mistakes; Doesn't make excuses or blame others for errors or problems; Carries his/her fair share of the workload; Does what he/she commits to doing.

Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law.

We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to careers@marmon.com, and please be sure to include the title and the location of the position for which you are applying.