field_job_employment_type

field_job_occupational_field_parents_all

job_organization_name

Offering Sign on Bonus, $500 payable at 6-month anniversary, $750 payable at 12-month anniversary. DESCRIPTION: The CNC Machinist will perform accurate and timely set-ups utilizing CNC mill or lathe machining centers. Proficient in accurate change-over of machine set-ups. Ensure conformance to customer requirements using calibrated measuring equipment and visual inspection. Record and comprehend company work instructions and set-up books. ESSENTIAL DUTIES: <ul><li>Setup and operate CNC lathe or mill for production operation.</li><li>Observe machine operation to detect malfunctions or out-of-tolerance machining and adjust machine controls as needed.</li><li>Responsible for DNC communications, downloading tool programs.</li><li>Inspect and measure parts according to set-up book inspection callouts.</li><li>Monitor and replace tools in accordance with tool life management system, document all tool changes.</li><li>Ensure company procedures and "best machining practices" are being followed.</li><li>Perform additional related duties as assigned.</li><li>Comply with applicable environmental, health and safety laws and regulations, Company policy and accepted safe work practices.</li></ul>EDEUCATION AND/OR EXPERIENCE: <ul><li>Minimum 5 years CNC experience in a manufacturing environment; OR,</li><li>2 years CNC experience in a manufacturing environment with certificates of completion for machining levels 1 &amp; 2 and an Associates of Applied Science in Manufacturing and Production Technology.</li><li>Demonstrated ability at operating CNC Machines and interpreting G &amp; M codes.</li><li>Changing cutting tools and accurately adjusting offsets.</li><li>Ability to set-up jobs independently.</li><li>Ability to read part drawings, apply GD&amp;T concepts and rules to understand geometric requirements.</li><li>Ability to correctly use and interpret measuring tools including micrometers, calipers, thread gages, chamfer gages, pin gage, test indicators, drop indicators, height gages, optical comparators.</li><li>Implement 6S concepts.</li><li>Basic computer skills: Excel, Word, Outlook.</li><li>Knowledgeable in Lean Manufacturing preferred.</li><li>Visual inspection experience preferred.</li><li>Detail oriented and strong organizational skills.</li><li>Excellent written and verbal communication skills.</li></ul>PHYSICAL DEMANDS WHILE PERFORMING THE JOB: <ul><li>Standing for long periods of time, walking, pushing, pulling, stooping, kneeling, or crouching, use hands to finger, handle, or feel parts; reaching with hands and arms and overhead; talking and/or hearing instructions and sounds.</li><li>Occasionally lift and/or move up to 40 pounds.</li><li>Close vision, color vision, depth perception, and ability to adjust focus.</li><li>Ability to differentiate shades and color to identify coating defects.</li><li>Near acuity and accommodation are required for reading dial and digital gauges, blueprints, and precision measuring instruments used in the inspection of coating operations.</li></ul>WORKING ENVIRONMENT OF THE JOB: <ul><li>Regularly exposed to moving mechanical parts.</li></ul><ul><li>Occasionally exposed to toxic or caustic chemicals and risk of electrical shock.</li><li>High noise levels from operating machines.</li><li>Physical hazards from moving equipment and machine parts.</li><li>The employee will be required to use personal protective equipment (PPE) to prevent exposure to hazardous materials commonly used in a manufacturing environment.</li></ul>Hours-1st shift, 6am-3:30pm.

1st Shift-AZ CNC Machinist III

Offering Sign on Bonus, $500 payable at 6-month anniversary, $750 payable at 12-month anniversary. DESCRIPTION: The CNC lathe machinist will perform accurate and timely set-ups utilizing Haas horizontal lathes. Proficient in accurate change-over of machine set-ups. Ensure conformance to customer requirements using calibrated measuring equipment and visual inspection. Record and comprehend company work instructions and set-up books. ESSENTIAL DUTIES: <ul><li>Setup and operate CNC lathe for production operation</li><li>Observe machine operation to detect malfunctions or out-of-tolerance machining and adjust machine controls as needed</li><li>Responsible for DNC communications, downloading tool programs</li><li>Inspect and measure parts according to set-up book inspection callouts</li><li>Monitor and replace tools in accordance with tool life management system, document all tool changes</li><li>Ensure company procedures and "best machining practices" are being followed</li><li>Perform additional related duties as assigned</li><li>Comply with applicable environmental, health and safety laws and regulations, Company policy and accepted safe work practices</li></ul>EDEUCATION AND/OR EXPERIENCE: <ul><li>Minimum 5 years CNC lathe experience in a manufacturing environment</li><li>Demonstrated ability at operating CNC Machines and interpreting G &amp; M codes</li><li>Changing cutting tools and accurately adjusting offsets</li><li>Ability to set-up jobs independently</li><li>Ability to read part drawings, apply GD&amp;T concepts and rules to understand geometric requirements</li><li>Ability to correctly use and interpret measuring tools including micrometers, calipers, thread gages, chamfer gages, pin gage, test indicators, drop indicators, height gages, optical comparators.</li><li>Implement 6S concepts</li><li>Basic computer skills: Excel, Word, Outlook</li><li>Detail oriented and strong organizational skills</li><li>Excellent written and verbal communication skills</li></ul>PHYSICAL DEMANDS WHILE PERFORMING THE JOB: <ul><li>Standing for long periods of time, walking, pushing, pulling, stooping, kneeling, or crouching, use hands to finger, handle, or feel parts; reaching with hands and arms and overhead; talking and/or hearing instructions and sounds</li><li>Occasionally lift and/or move up to 40 pounds</li><li>Close vision, color vision, depth perception, and ability to adjust focus</li><li>Ability to differentiate shades and color to identify coating defects</li><li>Near acuity and accommodation are required for reading dial and digital gauges, blueprints, and precision measuring instruments used in the inspection of coating operations</li></ul>WORKING ENVIRONMENT OF THE JOB: <ul><li>Regularly exposed to moving mechanical parts</li></ul><ul><li>Occasionally exposed to toxic or caustic chemicals and risk of electrical shock</li><li>High noise levels from operating machines</li><li>Physical hazards from moving equipment and machine parts</li><li>The employee will be required to use personal protective equipment (PPE) to prevent exposure to hazardous materials commonly used in a manufacturing environment</li></ul>

2nd Shift-AZ CNC Lathe Machinist II

Offering Sign on Bonus, $500 payable at 6-month anniversary, $750 payable at 12-month anniversary DESCRIPTION: The CNC Machinist will perform accurate and timely set-ups utilizing CNC mill or lathe machining centers. Proficient in accurate change-over of machine set-ups. Ensure conformance to customer requirements using calibrated measuring equipment and visual inspection. Record and comprehend company work instructions and set-up books. ESSENTIAL DUTIES: <ul><li>Setup and operate CNC lathe or mill for production operation</li><li>Observe machine operation to detect malfunctions or out-of-tolerance machining and adjust machine controls as needed</li><li>Responsible for DNC communications, downloading tool programs</li><li>Inspect and measure parts according to set-up book inspection callouts</li><li>Monitor and replace tools in accordance with tool life management system, document all tool changes</li><li>Ensure company procedures and "best machining practices" are being followed</li><li>Perform additional related duties as assigned</li><li>Comply with applicable environmental, health and safety laws and regulations, Company policy and accepted safe work practices</li></ul>EDEUCATION AND/OR EXPERIENCE: <ul><li>Minimum 5 years CNC experience in a manufacturing environment; OR, 2 years CNC experience in a manufacturing environment with certificates of completion for machining levels 1 &amp; 2 and an Associates of Applied Science in Manufacturing and Production Technology</li><li>Demonstrated ability at operating CNC Machines and interpreting G &amp; M codes</li><li>Changing cutting tools and accurately adjusting offsets</li><li>Ability to set-up jobs independently</li><li>Ability to read part drawings, apply GD&amp;T concepts and rules to understand geometric requirements</li><li>Ability to correctly use and interpret measuring tools including micrometers, calipers, thread gages, chamfer gages, pin gage, test indicators, drop indicators, height gages, optical comparators</li><li>Implement 6S concepts</li><li>Basic computer skills: Excel, Word, Outlook</li><li>Knowledgeable in Lean Manufacturing preferred</li><li>Visual inspection experience preferred</li><li>Detail oriented and strong organizational skills</li><li>Excellent written and verbal communication skills</li></ul>PHYSICAL DEMANDS WHILE PERFORMING THE JOB: <ul><li>Standing for long periods of time, walking, pushing, pulling, stooping, kneeling, or crouching, use hands to finger, handle, or feel parts; reaching with hands and arms and overhead; talking and/or hearing instructions and sounds</li><li>Occasionally lift and/or move up to 40 pounds</li><li>Close vision, color vision, depth perception, and ability to adjust focus</li><li>Ability to differentiate shades and color to identify coating defects</li><li>Near acuity and accommodation are required for reading dial and digital gauges, blueprints, and precision measuring instruments used in the inspection of coating operations.</li></ul>WORKING ENVIRONMENT OF THE JOB: <ul><li>Regularly exposed to moving mechanical parts</li></ul><ul><li>Occasionally exposed to toxic or caustic chemicals and risk of electrical shock</li><li>High noise levels from operating machines</li><li>Physical hazards from moving equipment and machine parts</li><li>The employee will be required to use personal protective equipment (PPE) to prevent exposure to hazardous materials commonly used in a manufacturing environment</li></ul>2nd Shift-Monday-Friday, Start time-3:30pm

2nd Shift-AZ CNC Machinist II

Offering Sign on Bonus, $500 payable at 6-month anniversary, $750 payable at 12-month anniversary. FM Industries is recognized as a premier manufacturing solutions provider of manufacturing services for the semiconductor capital equipment market. We specialize in build to print, precision machined components, anodization and engineered thermal spray coatings. We have locations in Northern California and Phoenix, Arizona. Since 2002, the business has been part of NGK Insulators, based in Nagoya, Japan. Our partnership with NGK is highly collaborative and complimentary. This job description is not intended to be all inclusive and is subject to change or include other duties as assigned by management. To ensure that FM Industries creates a safe and secure workplace, Employment offers are contingent upon successful completion of a drug and background check CNC Machinist BENEFITS: We offer a full complement of benefits including medical, dental, vision, life insurance, short and long-term disability, generous time off plan, observe nine holidays, and a 401k saving plan with a 30% match! CNC Machinist DESCRIPTION: The CNC Grinding Machinist will perform accurate and timely set-ups utilizing OD, ID, Profile, and Surface Grinders. Proficient in accurate change-over of machine set-ups. Ensure conformance to customer requirements using calibrated measuring equipment and visual inspection. Record and comprehend company work instructions and set-up books. CNC Machinist ESSENTIAL DUTIES: <ul><li>Setup and operate CNC grinders for production operations.</li><li>Observe machine operation to detect malfunctions or out-of-tolerance machining and adjust machine controls as needed.</li><li>Responsible for DNC communications, downloading tool programs.</li><li>Inspect and measure parts according to set-up book inspection callouts.</li><li>Monitor and recondition/dress grinding wheels in accordance with tool life management system, document all changes.</li><li>Ensure company procedures and "best machining practices" are being followed.</li><li>Perform additional related duties as assigned.</li><li>Comply with applicable environmental, health and safety laws and regulations, Company policy and accepted safe work practices.</li></ul> CNC Machinist EDEUCATION AND/OR EXPERIENCE: <ul><li>Minimum 5 years CNC Grinding experience in a manufacturing environment. </li><li>Experience utilizing Superabrasives and rotary dressing diamonds.</li><li>Demonstrated ability at operating CNC Machines.</li><li>Accurately adjusting machine work offsets.</li><li>Ability to set-up jobs independently.</li><li>Ability to read part drawings, apply GD&amp;T concepts and rules to understand geometric requirements.</li><li>Ability to correctly use and interpret measuring tools including micrometers, calipers, thread gages, chamfer gages, pin gage, test indicators, drop indicators, height gages, optical comparators.</li><li>Implement 6S concepts.</li><li>Basic computer skills: Excel, Word, Outlook.</li><li>Knowledgeable in Lean Manufacturing preferred.</li><li>Visual inspection experience preferred.</li><li>Detail oriented and strong organizational skills.</li><li>Excellent written and verbal communication skills.</li></ul>CNC Machinist PHYSICAL DEMANDS WHILE PERFORMING THE JOB: <ul><li>Standing for long periods of time, walking, pushing, pulling, stooping, kneeling, or crouching, use hands to finger, handle, or feel parts; reaching with hands and arms and overhead; talking and/or hearing instructions and sounds.</li><li>Occasionally lift and/or move up to 40 pounds.</li><li>Close vision, color vision, depth perception, and ability to adjust focus.</li><li>Ability to differentiate shades and color to identify coating defects.</li><li>Near acuity and accommodation are required for reading dial and digital gauges, blueprints, and precision measuring instruments used in the inspection of coating operations.</li></ul>CNC Machinist WORKING ENVIRONMENT OF THE JOB: <ul><li>Regularly exposed to moving mechanical parts.</li></ul><ul><li>Occasionally exposed to toxic or caustic chemicals and risk of electrical shock.</li><li>High noise levels from operating machines.</li><li>Physical hazards from moving equipment and machine parts.</li><li>The employee will be required to use personal protective equipment (PPE) to prevent exposure to hazardous materials commonly used in a manufacturing environment.</li></ul>

2nd Shift-CNC Machinist II - Grinder (AZ)

2nd Shift-CNC Machinist II - Grinder -(AZ)

As a CNC Machinist at NMG Aerospace, you are responsible for set up of machines and machining of complex parts, which includes the set-up of tooling and fixtures on machines using engineering set up drawings. You will also establish origins of machine to fixture and inspect and verifying parts for tolerance. Come join our NMG family and be part of a team of individuals who enjoy excellent health and retirement benefits, competitive pay, a comfortable work environment, and co-workers who enjoy working and learning together as a team. Apply Today! Shift Time for this position are 6:00 am - 3:30 pm Monday - Thursday and 6:00 am - 10:00 am on Friday Minimum Requirements: <ul><li>4+ years of CNC Machining experience in a regulated industry, Aerospace preferred.</li><li>Demonstrated ability to read blueprints.</li></ul>Job Summary Set up machines and machining of complex parts with close tolerances. Requires the ability to machine parts using CNC Lathe and/or CNC Mill with little or no supervision. Essential Job Functions <ul><li>Set up tooling and fixtures on machines using engineering set up drawings</li><li>Establish origins of machine to fixture and machining of first part to blueprint requirements</li><li>Inspect and verify part</li><li>Run production parts after set up</li><li>Establish production standards and optimize production for maximum output while maintaining quality and blueprint requirements</li><li>Perform in process inspection and benching of part during machine cycle</li><li>Complete all inspection data, SPC charts and certified operator documentation</li><li>Compliance with safety standards and guidelines</li><li>Maintain good housekeeping during all phases of production</li><li>Make accurate and detailed transactions of work done in ERP software.</li></ul>Additional Duties <ul><li>Provide support for Lean manufacturing and continuous improvement initiatives, companywide.</li><li>Other duties, reporting, special assignments or projects as needed and assigned.</li></ul>Qualifications <ul><li>4-7 years CNC Machining experience in a regulated industry, aerospace preferred</li><li>Knowledge of set-up and operation of CNC machines with excellent attention to detail</li><li>Demonstrated ability to read blueprints</li><li>Physical Requirement include standing for long periods of time, and lifting up to 50 lbs.</li><li>Must be willing to submit to and satisfactorily pass any pre-employment screening required for employment with NMG Aerospace (i.e. drug screen, background check, eye exam, hearing exam, etc.) and any subsequent testing required for the position during employment.</li><li>Must be able to remain in a stationary position 50 percent of the time.</li><li>The person in this position needs to occasionally move about inside the office or shop floor to access work supplies, tools, machinery, etc.</li><li>This position may require physical activity to include handling of objects up to 40 pounds. Anything above this weight limit will require the use of the proper equipment outlined during OTJ and workplace safety training. Physical activity may also include long periods of standing, sitting, and walking.</li></ul>Education <ul><li>High school diploma or equivalent</li><li>Completed apprenticeship program; journeymen certification preferred</li></ul>In addition to competitive wages, NMG is proud to offer a retirement saving plan with company matching opportunity, excellent health and wellness benefits including a $350 annual wellness allowance for assistance with personal health and fitness goals, can earn up to 4 weeks paid time off, on the job training, education assistance and a variety of other supportive programs to meet our team's member's needs. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

CNC Machinist (Lathes) - 1st Shift- Aerospace Manufacturing

Role As a CNC Machinist (also known as CNC Lathe Operator, CNC Mill Operator), you'll be responsible for setting up machines and machining complex parts with close tolerances. You'll ensure the setup of tooling and fixtures on machines using engineering set up drawings, inspect and verify parts, and optimize production for maximum output while maintaining quality and blueprint requirements. Benefits<ul><li>Opportunity to work in a regulated industry.</li><li>Support for Lean manufacturing and continuous improvement initiatives.</li><li>Comprehensive training and development opportunities.</li></ul>Qualifications<ul><li>4-7 years CNC Machining experience in a regulated industry, aerospace preferred.</li><li>Knowledge of set-up and operation of CNC machines with excellent attention to detail.</li><li>Demonstrated ability to read blueprints.</li><li>Physical Requirement include: standing for long periods of time, and lifting up to 40 lbs.</li><li>Proficiency in GD&amp;T, CNC Tooling, G-Code, M-Code, and Machine Setups for Production Runs.</li><li>High school diploma or equivalent. Completed apprenticeship program; journeymen certification preferred.</li></ul>

CNC Machinist - Lathes - 1st Shift (CNCMA002248)

Offering Sign on Bonus, $500 payable at 6-month anniversary, $750 payable at 12-month anniversary DESCRIPTION: The CNC Machinist will perform accurate and timely set-ups utilizing CNC mill or lathe machining centers. Proficient in accurate change-over of machine set-ups. Ensure conformance to customer requirements using calibrated measuring equipment and visual inspection. Record and comprehend company work instructions and set-up books. ESSENTIAL DUTIES: <ul><li>Setup and operate CNC lathe or mill for production operation.</li><li>Observe machine operation to detect malfunctions or out-of-tolerance machining and adjust machine controls as needed.</li><li>Responsible for DNC communications, downloading tool programs.</li><li>Inspect and measure parts according to set-up book inspection callouts.</li><li>Monitor and replace tools in accordance with tool life management system, document all tool changes.</li><li>Ensure company procedures and "best machining practices" are being followed.</li><li>Perform additional related duties as assigned.</li><li>Comply with applicable environmental, health and safety laws and regulations, Company policy and accepted safe work practices.</li></ul>EDEUCATION AND/OR EXPERIENCE: <ul><li>Minimum 5 years CNC experience in a manufacturing environment; OR 2 years CNC experience in a manufacturing environment with certificates of completion for machining levels 1 &amp; 2 and an Associates of Applied Science in Manufacturing and Production Technology.</li><li>Demonstrated ability at operating CNC Machines and interpreting G &amp; M codes.</li><li>Changing cutting tools and accurately adjusting offsets.</li><li>Ability to set-up jobs independently.</li><li>Ability to read part drawings, apply GD&amp;T concepts and rules to understand geometric requirements.</li><li>Ability to correctly use and interpret measuring tools including micrometers, calipers, thread gages, chamfer gages, pin gage, test indicators, drop indicators, height gages, optical comparators.</li><li>Implement 6S concepts.</li><li>Basic computer skills: Excel, Word, Outlook.</li><li>Knowledgeable in Lean Manufacturing preferred.</li><li>Visual inspection experience preferred.</li><li>Detail oriented and strong organizational skills.</li><li>Excellent written and verbal communication skills.</li></ul>PHYSICAL DEMANDS WHILE PERFORMING THE JOB: <ul><li>Standing for long periods of time, walking, pushing, pulling, stooping, kneeling, or crouching, use hands to finger, handle, or feel parts; reaching with hands and arms and overhead; talking and/or hearing instructions and sounds.</li><li>Occasionally lift and/or move up to 40 pounds.</li><li>Close vision, color vision, depth perception, and ability to adjust focus.</li><li>Ability to differentiate shades and color to identify coating defects.</li><li>Near acuity and accommodation are required for reading dial and digital gauges, blueprints, and precision measuring instruments used in the inspection of coating operations.</li></ul>WORKING ENVIRONMENT OF THE JOB: <ul><li>Regularly exposed to moving mechanical parts.</li></ul><ul><li>Occasionally exposed to toxic or caustic chemicals and risk of electrical shock.</li><li>High noise levels from operating machines.</li><li>Physical hazards from moving equipment and machine parts.</li><li>The employee will be required to use personal protective equipment (PPE) to prevent exposure to hazardous materials commonly used in a manufacturing environment.</li></ul>2nd Shift-Monday-Friday. Start time of 3:30 pm. 10-hour shifts

CNC Machinist III Company: Martinic Engineering Inc Primary Location: 8505 West McDowell Road, Tolleson, AZ 85353 USA Employment Type: Hourly | Full-Time Function: Manufacturing Production / Distribution Equal Opportunity Employer Minorities/Women/Veterans/Disabled Main Duties &amp; Responsibilities Summary: Sets up and operates various conventional and/or numerically controlledmachining centers on the most complex and difficult jobs. Works from blueprints, sketches, planningsheets, verbal instructions, and/or engineering, tooling, or equipment information.Contributes to lean initiatives to increase productivity and reduce costs. Works independently withminimum guidance in a team environment. This is a 2nd shift position from 2:30pm - 11:00pm. Essential Duties and Responsibilities: • Runs multiple machines efficiently, which may require simultaneous operations.Adapts or improvises tooling to accomplish results where operations require a broadknowledge of production machining technology, operating skills, and shop techniques together withdiversified experience. • Sets ups, adjusts, and operates a variety of conventionaland/or special purpose CNC Lathe machines to perform the most diversified and difficult production operations onwork having close and exact tolerances, several dimensional relationships, unusual contours,dimensional and finish requirements. • Interprets customer requirements from blueprints, complexdrawings, engineering specifications, quality directives, charts, tables, sketches, and verbalinstructions. • Interfaces with engineering to resolve drawing errors,suggest design changes, and solve product/process problems. • Implements manufacturing methods using standard productionmachines, materials, and tooling. May advise and assist with tooling design. • Makes complex setups, which may include multiple work piecestations, utilizing custom and standard holding devices. • Develops and defines processes with limited documentation,as required. • Trouble shoots and resolves machining problems. • Responsible for machining and checking parts to maintain ahigh level of quality and efficiency. • Inspects finished parts for conformance to specificationsby visual examination, and utilizes precision measuring instruments such as gages, calipers, micrometers,comparators, and surface plate techniques. May be required to use coordinate measuring machine (CMM).Ensures equipment is calibrated in accordance with schedule. • Routinely maintains equipment to ensure cleanliness,accuracy, and reliability specific to division requirements. • Accurately and regularly performs statistical process control (SPC) specific todivision requirements. • Uses advanced shop mathematics, which may includetrigonometry, and general knowledge of metal characteristics and other processing requirements. • Actively contributes to lean initiatives by identifying andproviding suggestions on areas for improvement. Effectively applies lean concepts and tools in work area. • Provides guidance or assistance in coordinating workloadpriorities to make appropriate accommodations based on business demand. • Observes all company policies and procedures, includingsafety rules, and maintains a clean and orderly work area. • Trains and mentors less experienced team members. Performsother related responsibilities, as requested Qualifications Education, Training, Skills and Experience Requirements: • Five or more years of directly related machining experience in a hightechnology manufacturing environment. Able to work with minimum supervisory guidance. • Handles multiple tasks with changing priorities to meetcustomer needs. • May require specialize certification specific to divisionrequirements (i.e. certified operator). • Reads, understands, and follows blueprints, complexdrawings, engineering specifications, and informal written or verbal instructions. • Able to make and evaluate precision machine set ups. • Has working knowledge of advanced shop mathematics, mayinclude trigonometry. • Able to implement lean initiatives. • Demonstrates effective verbal, written, and interpersonalcommunication skills, as well as the ability to work in a team environment on research and solution development. • Possesses effective mentoring and training skills, andability to service as a resource to other team members. • Interprets reports and uses job specific softwareapplications. Able to use employee self-service systems to access on-line information and use specializedautomated systems (i.e. PMR, TORS, e-mail). • Effectively demonstrates team member competencies and participates in goalsetting, performance feedback, and self-development activities. Physical Demands: While performing the duties of this job, the team member is required to walk,stand, and sit for extended periods of time. The team member is required to demonstrate manualdexterity and use hands to operate machinery. Specific vision abilities required by this job includeclose vision. Also expected of the team member is regular attendance, and the ability to workcooperatively and professionally with others. May be required to lift up to 50 lbs. (Theessential functions have been provided as examples of types of work performedby team members assigned to this job classification. The Company reserves the right to modifywork assignments and/or to make reasonable accommodations so that qualified team members canperform the essential functions of the job. The physical and mental demands described above arerepresentative of those required to successfully perform the essential functions of this job.) Thisposition requires access to information, or technology, which is subject to theInternational Traffic in Arms Regulations (ITAR). All applicants must be U.S. personswithin the meaning of ITAR. ITAR defines a U.S. person as a (i) citizen or national of theUnited States; or (ii) a lawful Holder"); or (iii) a person admitted to gee, or granted asylum, asspecified under applicable law.

CNC Machinist III

Offering Sign on Bonus, $500 payable at 6-month anniversary, $750 payable at 12-month anniversary. DESCRIPTION: The CNC Machinist will perform accurate and timely set-ups utilizing Mazak vertical mill. Proficient in accurate change-over of machine set-ups. Ensure conformance to customer requirements using calibrated measuring equipment and visual inspection. Record and comprehend company work instructions and set-up books. ESSENTIAL DUTIES: <ul><li>Setup and operate Mazak, Haas, and Makino vertical mills for production operation.</li><li>Observe machine operation to detect malfunctions or out-of-tolerance machining and adjust machine controls as needed.</li><li>Responsible for DNC communications, downloading tool programs.</li><li>Inspect and measure parts according to set-up book inspection callouts.</li><li>Monitor and replace tools in accordance with tool life management system, document all tool changes.</li><li>Ensure company procedures and "best machining practices" are being followed.</li><li>Perform additional related duties as assigned.</li><li>Comply with applicable environmental, health and safety laws and regulations, Company policy and accepted safe work practices.</li></ul>EDEUCATION AND/OR EXPERIENCE: <ul><li>Minimum 10 years CNC vertical milling experience in a manufacturing environment, performing setups, troubleshooting issues. </li><li>Demonstrated ability at operating CNC Machines and interpreting G &amp; M codes.</li><li>Changing cutting tools and accurately adjusting offsets.</li><li>Ability to set-up jobs independently.</li><li>Ability to read part drawings, apply GD&amp;T concepts and rules to understand geometric requirements.</li><li>Ability to correctly use and interpret measuring tools including micrometers, calipers, thread gages, chamfer gages, pin gage, test indicators, drop indicators, height gages, optical comparators.</li><li>Implement 6S concepts.</li><li>Basic computer skills: Excel, Word, Outlook.</li><li>Knowledgeable in Lean Manufacturing preferred.</li><li>Visual inspection experience preferred.</li><li>Detail oriented and strong organizational skills.</li><li>Excellent written and verbal communication skills.</li></ul>PHYSICAL DEMANDS WHILE PERFORMING THE JOB: <ul><li>Standing for long periods of time, walking, pushing, pulling, stooping, kneeling, or crouching, use hands to finger, handle, or feel parts; reaching with hands and arms and overhead; talking and/or hearing instructions and sounds.</li><li>Occasionally lift and/or move up to 40 pounds.</li><li>Close vision, color vision, depth perception, and ability to adjust focus.</li><li>Ability to differentiate shades and color to identify coating defects.</li><li>Near acuity and accommodation are required for reading dial and digital gauges, blueprints, and precision measuring instruments used in the inspection of coating operations.</li></ul>WORKING ENVIRONMENT OF THE JOB: <ul><li>Regularly exposed to moving mechanical parts.</li></ul><ul><li>Occasionally exposed to toxic or caustic chemicals and risk of electrical shock.</li><li>High noise levels from operating machines.</li><li>Physical hazards from moving equipment and machine parts.</li><li>The employee will be required to use personal protective equipment (PPE) to prevent exposure to hazardous materials commonly used in a manufacturing environment.</li></ul>Hours--Monday-Friday, 3:30pm-12am.

15 CNC Machinist Jobs in Phoenix, AZ, USA