field_job_employment_type

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

field_job_salary_range

SUMMARY:&nbsp; This CNC Machinist – Class A position is responsible for setting up and operating multi-axis CNC lathes.&nbsp; 1st and 2nd shift positions available (with 2nd shift differential)ESSENTIAL DUTIES:<ul><li>Set-up and run multi-axis CNC lathes.</li><li>Inspect own work and make any off-set changes as required to ensure an acceptable first piece.</li><li>Use standard inspection equipment such as micrometers, calipers, and gages.</li><li>Read and interpret blueprints and follow detailed work instructions.</li><li>Change any tools required and hold tight tolerances.</li><li>Meet production schedules and quality standards.</li><li>Troubleshoot own work and assist others with set-up and/or production difficulties.</li></ul>EDUCATION and/or EXPERIENCE:<ul><li>High school diploma or equivalent required</li><li>3-5 years’ experience setting up and operating multi-axis CNC lathes</li><li>Swiss Turn experience a +</li><li>Must have good shop math skills</li></ul>QUALIFICATIONS:<ul><li>Must be very detail oriented, organized, have good communication skills and be a team player.</li><li>Must be able to work quickly and accurately with little supervision.</li></ul>Hourly rate starting at: $34.00

CNC Machinist – Class A/Leadman - Lathe

Industry: Manufacturing &amp; Production Job Category: Manufacturing - Production The Company is currently seeking a CNC &amp; NC Machine Setup &amp; Operator. The core hours are 6:00am to 2:30pm.&nbsp;What you’ll do:<ul><li>Setup and operate NC and CNC machines and any conventional machines in the Casting Cells to perform a variety of turning, drilling, tapping, boring, reaming, threading, forming, facing, milling, slotting, grooving, chamfering, serrating and deburring operations to produce a variety of explosion-proof parts of various materials</li><li>Operate machines include, but are not limited to, single spindle and multi-spindle drill presses and tappers; milling machines; parts washers; and deburring grinder</li><li>Refer to assembly drawings, wiring diagrams and machining blueprints to maintain tolerances.</li><li>Set controls and perform other manual data input functions as required, review operation data sheets, parts program, tape readouts and prints, and change collets and/or chucks; load and unload parts; load, unload and adjust tools as necessary</li><li>Check first piece using fixed or adjustable gauges; gauge periodically and visually inspect all parts for appearance and compliance to specifications; correct for any discrepancies.</li><li>Maintain a supply of materials to machines and remove finished work as necessary to establish a flow through the cells</li><li>Operate fork truck to facilitate own work or to move material around department as required</li><li>Maintain work area, machines and control units in a clean, neat and orderly condition and follow 5-S's principles</li></ul>Qualifications: Basic Qualifications:<ul><li>Minimum two (2) years’ previous work experience in machine setup and operation</li><li>Ability to read and understand blueprints, charts, and tables</li><li>Authorized to work in the United States without Company sponsorship.</li><li>No relocation benefit is offered for this position. Only candidates residing within the immediate area of Syracuse facility (50 miles) will be considered for this position. &nbsp;</li></ul>Preferred Qualifications:<ul><li>3+ years of work experience with NC &amp; CNC machine setup and operation</li><li>Fork Truck experience</li></ul>

CNC & NC Machine Setup & Operator

POSITION SUMMARYResponsible for setting up and operating CNC machine tools to cut and shape metallic workpieces. Manual machining also required for some projects.BENEFITS<ul><li>Pay based on skill and experience ($25-$29 / hour)</li><li>Health Insurance plus Dental &amp; Vision coverage</li><li>401K</li><li>Tuition Reimbursement Program</li></ul>ESSENTIAL DUTIES AND RESPONSIBILITIES (may vary depending on machine assignment)<ul><li>Operate CNC machines (Okuma and Haas machines—“G” code) used to cut and shape precision workpieces used in the manufacture of heat transfer products from solid blocks of metal.</li><li>Read and interpret blueprints and/or job orders to determine product specifications, tooling instructions, and sequence of operations.</li><li>Mount, install, align, and secure tools, attachments, fixtures, and workpieces on CNC machines.</li><li>Control position of tool and workpiece in relation to each other and set specified feeds, speeds, and depth of cut. Make adjustments as necessary.</li><li>Set-up fixture or feeding device, start machine, feed tool to workpiece, and engages feed.</li><li>Direct flow of coolant or cutting oil against tool and workpiece.</li><li>Visually and audibly observe operation of CNC machine to verify conformance of machined workpiece to blueprint and/or job order specifications and to detect sounds, such as those made by dull cutting tools or excessive vibration. Correct identified production problems as necessary.</li><li>Operate various small equipment to complete workpieces.</li><li>Assist and train CNC Machinists in machine set up procedures.</li><li>Use all safety devices/tools to ensure safe operation of CNC machines.</li><li>Inspect all finished product to confirm meets blueprint and/or job order specifications.</li><li>Complete all required paperwork.</li><li>Perform minor machine maintenance as required or directed.</li><li>Ensure work area is kept clean and organized at all times.</li><li>Knowledge, understanding, and compliance with Company policies and procedures.</li><li>Make recommendations to implement improved processes.</li><li>Provide feedback to management concerning possible problem or areas of improvement.</li><li>Participate in cross training throughout manufacturing facility. Dependent upon company need, may be posted in alternate work assignment.</li><li>All other duties as assigned</li></ul>Qualifications:<ul><li>High school or General Equivalency Diploma (GED) or technical school diploma or equivalent in relevant work experience preferred.</li><li>2 years related experience and training required. 5 years of related experience preferred.</li><li>Proficient in accurate use of micrometers, calipers, and other measuring tools.</li><li>Ability to read and work to set tolerances and work from blueprints.</li><li>Ability to set-up and operate CNC Mills. Programming skills preferred.</li><li>Mechanically inclined and possess strong degree of attention to detail.</li><li>Manual machining experience preferred</li><li>Ability to define problems, collect data, establish facts, and draw and apply valid conclusions.</li><li>Ability to read, write, and comprehend simple instructions and/or correspondence.</li><li>Basic mathematical skills required.</li><li>Ability to be cross trained throughout manufacturing facility.</li><li>Ability to work in a team fostered environment.</li></ul>COMPANY OVERVIEWBoyd is the world's leading innovator in sustainable engineered material and thermal solutions that make our customers’ products better, safer, faster, and more reliable. We develop and combine technologies to solve ambitious performance targets in our customers’ most critical applications. By implementing technologies and material science in novel ways to seal, protect, cool, and interface, Boyd has continually redefined the possible and championed customer success for over 90 years.As a unique provider of innovative solutions, Boyd Corporations is in a multitude of industries such as aerospace, medical, consumer electronics and recreational vehicles to name only a few. We partner and serve some of the top organizations around the world. Our diversification and our global reach in the US, Asia and Europe, mean we offer many ways for you to grow and develop your career. We push the limits of your potential and provide you with the tools you need for a successful career.

CNC Machinist

POSITION SUMMARYSenior CNC Machinist role. Responsible for setting up and operating CNC machine tools to cut and shape metallic workpieces. Manual machining also required for some projects.BENEFITS<ul><li>Pay based on skill and experience ($30-$45 / hour)</li><li>Health Insurance plus Dental &amp; Vision coverage</li><li>401K</li><li>Tuition Reimbursement Program</li></ul>ESSENTIAL DUTIES AND RESPONSIBILITIES (may vary depending on machine assignment)<ul><li>Operate CNC machines (Okuma and Haas machines—“G” code) used to cut and shape precision workpieces used in the manufacture of heat transfer products from solid blocks of metal.</li><li>Read and interpret blueprints and/or job orders to determine product specifications, tooling instructions, and sequence of operations.</li><li>Mount, install, align, and secure tools, attachments, fixtures, and workpieces on CNC machines.</li><li>Control position of tool and workpiece in relation to each other and set specified feeds, speeds, and depth of cut. Make adjustments as necessary.</li><li>Set-up fixture or feeding device, start machine, feed tool to workpiece, and engages feed.</li><li>Direct flow of coolant or cutting oil against tool and workpiece.</li><li>Visually and audibly observe operation of CNC machine to verify conformance of machined workpiece to blueprint and/or job order specifications and to detect sounds, such as those made by dull cutting tools or excessive vibration. Correct identified production problems as necessary.</li><li>Operate various small equipment to complete workpieces.</li><li>Assist and train CNC Machinists in machine set up procedures.</li><li>Use all safety devices/tools to ensure safe operation of CNC machines.</li><li>Inspect all finished product to confirm meets blueprint and/or job order specifications.</li><li>Complete all required paperwork.</li><li>Perform minor machine maintenance as required or directed.</li><li>Ensure work area is kept clean and organized at all times.</li><li>Knowledge, understanding, and compliance with Company policies and procedures.</li><li>Make recommendations to implement improved processes.</li><li>Provide feedback to management concerning possible problem or areas of improvement.</li><li>Participate in cross training throughout manufacturing facility. Dependent upon company need, may be posted in alternate work assignment.</li><li>All other duties as assigned</li></ul>Qualifications:<ul><li>High school or General Equivalency Diploma (GED) or technical school diploma or equivalent in relevant work experience preferred.</li><li>5 years related experience and training preferred.</li><li>Proficient in accurate use of micrometers, calipers, and other measuring tools.</li><li>Ability to read and work to set tolerances and work from blueprints.</li><li>Ability to set-up and operate CNC Mills. Programming skills preferred.</li><li>Mechanically inclined and possess strong degree of attention to detail.</li><li>Manual machining experience preferred</li><li>Ability to define problems, collect data, establish facts, and draw and apply valid conclusions.</li><li>Ability to read, write, and comprehend simple instructions and/or correspondence.</li><li>Basic mathematical skills required.</li><li>Ability to be cross trained throughout manufacturing facility.</li><li>Ability to work in a team fostered environment.</li></ul>COMPANY OVERVIEWBoyd is the world's leading innovator in sustainable engineered material and thermal solutions that make our customers’ products better, safer, faster, and more reliable. We develop and combine technologies to solve ambitious performance targets in our customers’ most critical applications. By implementing technologies and material science in novel ways to seal, protect, cool, and interface, Boyd has continually redefined the possible and championed customer success for over 90 years.As a unique provider of innovative solutions, Boyd Corporations is in a multitude of industries such as aerospace, medical, consumer electronics and recreational vehicles to name only a few. We partner and serve some of the top organizations around the world. Our diversification and our global reach in the US, Asia and Europe, mean we offer many ways for you to grow and develop your career. We push the limits of your potential and provide you with the tools you need for a successful career.

Senior CNC Machinist

Broda Machine Company has recently expanded and is searching for a lead Swiss CNC for a cell of 5 machines. Broda Machine Company is a modern, well equipped, air conditioned/heated facility. The individual operates and manages Swiss computer numerical controlled (CNC) machines to produce machined parts. They are responsible for programming, setting up, and operating these machines with minimal assistance. Additionally, they must maintain quality and safety standards, and ensure the availability of necessary tooling, equipment, and supplies for daily production.This role reports to the management and requires certain key skills and competencies:1) At least 1 year of experience in set-up, programming and operation of Swiss CNC lathes. We currently have Star, SR20J, SR32J and Tsugami, B0385, B0385L machines.2) Advanced knowledge of precision measuring instruments.3) Strong understanding of blueprint reading, geometric tolerance interpretation, and shop math.4) Extensive knowledge of manufacturing processes, including speeds and feeds, tool holders, cutting tools, boring bars, fixtures, inserts, and other machine accessories.5) Ability to troubleshoot, edit, and program CNC programs based on prints in a timely manner.6) Demonstration of leadership skills by setting precedence through leading by example.7) Leadership skills are required for this role.Responsibilities and accountabilities include:1) Assisting in the training and mentorship of other employees in all aspects of the job.2) Determining the optimal order of operations for product manufacturing.3) Conducting advanced level setups of machines, including program writing, when necessary, program editing, and program proving. Additionally, selecting appropriate tooling is part of this responsibility.4) Detecting and troubleshooting equipment malfunctions and out-of-tolerance part features, making necessary adjustments within machine capabilities to ensure production quality.5) Managing multiple jobs and personnel during daily operations, including running, inspecting, and optimizing established jobs.General Shop &amp; Maintenance: Job requires material handling, warehouse organization, machine cleaning and oil separation from chips. Position also requires the use of a crane and forklift.Benefits:Health Insurance Options.FSA.PTO.Excellent Dental and Vision coverage.Employee Assistance Program.Financial and Wellness programs to help improve all aspects of your life journey.401(k) retirement savings plan with significant company match.Paid holidays.Life Insurance.Broda Machine Company is operational between the hours of 5am - 4pm. Regular Shift is 7am - 3pm.All Applicants Resumes and Inquiries are Private and Confidential with Regard to Current Employment.Job Type: Full-timePay: $30.00 - $40.00 per hourExpected hours: No less than 40 per weekBenefits:<ul><li>401(k)</li><li>401(k) matching</li><li>Dental insurance</li><li>Employee assistance program</li><li>Flexible spending account</li><li>Health insurance</li><li>Life insurance</li><li>Paid time off</li><li>Retirement plan</li><li>Vision insurance</li></ul>Schedule:<ul><li>10 hour shift</li><li>12 hour shift</li><li>8 hour shift</li><li>Day shift</li></ul>Supplemental Pay:<ul><li>Overtime pay</li><li>Yearly bonus</li></ul>Ability to Relocate:<ul><li>Niagara Falls, NY 14304: Relocate before starting work (Required)</li></ul>Work Location: In person

CNC Swiss Lathe Lead Machinist

Functional aspect of the position&nbsp;Machinist focused on programming, setting up, and operating CNC Milling machines. Further they produce production parts to required tolerances and due dates.&nbsp;Essential Duties of the Position*&nbsp;Description of duty % of time spent on this task&nbsp;Programming, machine set up, and machine operation 80%<ul><li>Writes complex programs on the machine and offline on CAD/CAM software.</li><li>Designs and builds complex fixtures related to various machining operations.</li><li>Read blueprints, job travelers, work instructions, program and tooling sheets, quality documents and GD&amp;T; Ensures processes and operations are correct.</li><li>Sets up production machines following prints and specifications.</li><li>Chooses, aligns, and securely attaches holding fixtures, cutting tools, attachments, accessories, and other materials on machines according to work instructions.</li><li>Applies knowledge of mathematics and instruments to calculate dimensions and tolerances.</li><li>Identifies malfunctions or out-of-tolerance machining; adjusts controls of machine to correct errors.</li><li>Inspects and measures completed production units to identify defects caused by machine setup.&nbsp;</li></ul>Workplace Safety and maintenance 10%<ul><li>Is responsible for taking care of routine machine maintenance and keeping work area in neat condition.</li><li>Proper and safe use of material handling equipment such as cranes, carts, etc.</li><li>Follows all company safety rules, including machine operation and guarding. Reports/other related 5%</li><li>Maintains simple reports on work orders handled, quantities produced and quality reports.</li><li>Ability to follow work order instructions, blueprint reading and geometric tolerances.</li><li>Performs miscellaneous duties and participates in training as assigned by a supervisor.&nbsp;</li></ul>Other duties as requested by supervisor 5%&nbsp;Education &amp; Experience<ul><li>High school diploma or equivalent required.</li><li>Associate degree in Manufacturing/Technical Programming; OR completion of a full apprenticeship program; OR successful completion of suitable company training required.</li><li>At least five (5) years of experience as a fully qualified machinist required. Required knowledge, skills and abilities</li><li>Understands blueprints, job travelers, work instructions, program and tooling sheets, tooling specifications, quality documents and familiar with GD&amp;T.</li><li>Familiarity with Mastercam and SolidWorks or similar CAD/CAM software.</li><li>Use of inspection hand tools.</li><li>Strong math skills including algebra, geometry, basic trigonometry preferred.</li><li>Strong working knowledge with work holding, cutting tools, grinding wheels and shop supplies.</li><li>Ability to plan, program, setup and run production based on engineering drawings and related documentation.</li><li>Ability to follow quality plans and the proper use, care and calibration of inspection tooling and equipment.</li><li>Good communication skills; Ability to establish and maintain effective working relationships with co-workers and other stakeholders.</li><li>Ability to work independently or in a team.</li><li>Good time management Preferred knowledge, skills and abilities</li><li>Good working knowledge of material identification and processing characteristics and processes such as heat treatment etc.</li><li>Experience with hard milling.</li><li>Experience with Renishaw Inspection Plus software.&nbsp;</li></ul>Physical Requirements&nbsp;Sitting, standing, stooping, bending, standard lifting up to 50 pounds, carrying, repetitive movements due primarily to computer work. Ability to operate and repair machines; prolonged periods of standing, walking, bending and stretching. All of the ergonomic requirements must be performed without significant risk of injury to oneself or others, or otherwise demonstrated or explain how one can perform essential functions of the position listed above.

CNC Milling Machinist

Functional aspect of the position&nbsp;Machinist focused on programming, setting up, and operating CNC Lathe machines. Further they produce production parts to required tolerances and due dates.&nbsp;Programming, machine set up, and machine operation 80%<ul><li>Writes complex programs on the machine and offline on CAD/CAM software.</li><li>Designs and builds complex fixtures related to various machining operations where applicable.</li><li>Read blueprints, job travelers, work instructions, program and tooling sheets, quality documents and GD&amp;T; Ensures processes and operations are correct.</li><li>Sets up production machines following prints and specifications.</li><li>Chooses, aligns, and securely attaches holding fixtures, jaws, cutting tools, attachments, accessories, and other materials on machines according to work instructions.</li><li>Applies knowledge of mathematics and instruments to calculate dimensions and tolerances.</li><li>Identifies malfunctions or out-of-tolerance machining; adjusts controls of machine to correct errors.</li><li>Inspects and measures completed production units to identify defects caused by machine setup.&nbsp;</li></ul>Workplace Safety and maintenance 10%<ul><li>Is responsible for taking care of routine machine maintenance and keeping work area in neat condition.</li><li>Proper and safe use of material handling equipment such as cranes, carts, etc.</li><li>Follows all company safety rules, including machine operation and guarding.</li></ul>Reports/other related 5%<ul><li>Maintains simple reports on work orders handled, quantities produced and quality reports.</li><li>Ability to follow work order instructions, blueprint reading and geometric tolerances.</li><li>Performs miscellaneous duties and participates in training as assigned by a supervisor.&nbsp;</li></ul>Other duties as requested by supervisor 5%&nbsp;Education &amp; Experience<ul><li>High school diploma or equivalent required.</li><li>Associate degree in Manufacturing/Technical Programming; OR completion of a full apprenticeship program; OR successful completion of suitable company training required.</li><li>At least three (5) years of experience as a fully qualified machinist required.&nbsp;</li></ul>Required knowledge, skills and abilities<ul><li>Understands blueprints, job travelers, work instructions, program and tooling sheets, tooling specifications, quality documents and familiar with GD&amp;T.</li><li>Familiarity with Mastercam and SolidWorks or similar CAD/CAM software.</li><li>Use of inspection hand tools.</li><li>Strong math skills including algebra, geometry, basic trigonometry preferred.</li><li>Strong working knowledge with work holding, cutting tools, grinding wheels and shop supplies.</li><li>Ability to plan, program, setup and run production based on engineering drawings and related documentation.</li><li>Ability to follow quality plans and the proper use, care and calibration of inspection tooling and equipment.</li><li>Good communication skills; Ability to establish and maintain effective working relationships with co-workers and other stakeholders.</li><li>Ability to work independently or in a team.</li><li>Good time management</li></ul>Preferred knowledge, skills and abilities<ul><li>Good working knowledge of material identification and processing characteristics and processes such as heat treatment etc.</li><li>Experience with hard milling.</li><li>Experience with Renishaw Inspection Plus software.</li></ul>Physical Requirements<ul><li>Sitting, standing, stooping, bending, standard lifting up to 50 pounds, carrying, repetitive movements due primarily to computer work.&nbsp;</li><li>Ability to operate and repair machines; prolonged periods of standing, walking, bending and stretching.&nbsp;</li><li>All of the ergonomic requirements must be performed without significant risk of injury to oneself or others, or otherwise demonstrated or explain how one can perform essential functions of the position listed above.</li></ul>

CNC Lathe Machinist

Would you consider moving to a beautiful part of the country? Excellent cost of living. Great hunting, fishing, boating, skiing, snowmobiling etc... Mount Mfg is located in beautiful Marquette, MI. They are looking for a “CNC Swiss-Lathe Setup Machinist” for the afternoon shift. -----Job Title: CNC Swiss-Lathe Setup Machinist - Afternoon ShiftDepartment: OperationsReports to: CNC Turning ManagerSchedule: 3:30pm – 11:30pm, Monday - FridayCompany: Mount Mfg is an orthopedic contract manufacturing company located in Marquette, MI. The company operates with a quality system that is ISO 13485:2016 certified and FDA registered.Job Responsibilities:<ul><li>Setup, trouble-shoot and operate CNC Swiss Lathes (sliding headstock) including tooling installation, offsets, work-holding, coolant lines (high and low pressure), and understand and perform all conventional methods of swiss machining</li><li>Perform minor program adjustments as needed when approved by manager (i.e. deburring passes, order of operation, speed &amp; feed adjustments, etc)</li><li>Perform and document in-process inspection utilizing good documentation practices</li><li>Assist co-workers in the troubleshooting of CNC machining issues</li><li>Ability to read and interpret prints and GD&amp;T per ASME Y14.5</li><li>Attend Pre-production Meetings as needed</li><li>Must have social skills to adequately operate in a team environment and maintain a positive company culture</li><li>Act as a leader and mentor to new operators learning CNC machining</li><li>Other duties as assigned</li></ul>Experience/Education: High School Diploma, and 5+ years experience in a relevant manufacturing environment with minimum 2 years of swiss-lathe setup experienceExperience with 21 CFR Part 820 and ISO 13485:2016 preferred but not requiredKnowledge of common manufacturing processes such as CNC milling, CNC turning, blast finishing, laser marking, cleaning, passivation, anodization, heat treatment, forming, etc. preferred but not required.Travel Requirements: Minimal. Occasional technical training workshopsJob Type: Full-timePay: $26.00 - $35.00 per hourBenefits:<ul><li>401(k)</li><li>401(k) matching</li><li>Dental insurance</li><li>Flexible schedule</li><li>Health insurance</li><li>Health savings account</li><li>Life insurance</li><li>Paid time off</li><li>Vision insurance</li></ul>Schedule:<ul><li>8 hour shift</li><li>Day shift</li><li>Monday to Friday</li></ul>Education:<ul><li>High school or equivalent (Required)</li></ul>Experience:<ul><li>Swiss-lathe setup: 2 years (Required)</li><li>CNC Machining: 3 years (Required)</li></ul>Work Location: In person

CNC Swiss Setup Machinist in Marquette, MI - Relocation $ Provided

Exciting opportunity to work for a reputable company in the racing industry, located in beautiful Mooresville, NC. This is a true machinist role - prove out program, operate, and QC parts.Top of the line Mazak equipment.&nbsp;-----The CNC Multi-Axis Machinist will produce machined parts by setting up and operating 4 and 5-axis CNC machine tools. &nbsp;Responsibilities:&nbsp;<ul><li>Manufacture parts with 4 and 5-axis CNC machines by using industry standard machining techniques and practices while adhering to quality assurance procedures and processes.</li><li>Plan machining from work schedules and engineering drawings and CAD. &nbsp;</li><li>Work independently or with other Machine Shop staff to determine work holding, tool holding, and tools required for jobs.</li><li>Anticipate tooling and material needs, check inventory, and place orders with supervisor as needed.</li><li>Directly program using Mazatrol or load CAM program to CNC machines.</li><li>Manufacture parts using conventional machining equipment (manual machines, saws, etc.) and other CNC equipment as required.</li><li>Maintain and update manufacturing information as per company directive.</li><li>Maintain safe operations in compliance with safety procedures and regulations.</li><li>Maintain equipment by completing preventative maintenance requirements following manufacturer’s instructions and standards set forth by management. &nbsp;When necessary, repair machines and equipment and test operation of unit to ensure functionality and performance. &nbsp;</li><li>Use effective oral and written communication to include proper programming, set-up sheets and suggestions for improvement.</li><li>Accomplish organizational goals by accepting ownership and personal accountability for job done.</li><li>Responsible for keeping equipment and work area clean and orderly according to company standards.</li><li>Arrive on time for scheduled work, work overtime and weekends as necessary.</li><li>Be dependable and professional, act with integrity, work effectively with others, take initiative, and be willing to apply new knowledge and skills.</li><li>Other duties as assigned.&nbsp;</li></ul>Qualifications: &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;<ul><li>High school machining program and / or post-secondary technical school with earned diploma, certificate, or degree in machining trade training preferred.</li><li>5 years minimum experience operating 4 and 5-axis CNC machining centers and mill-turn machines. &nbsp;Mazak Mazatrol experience is a plus.</li><li>Must be able to work independently and possess strong CNC setup, operating, and machine G-coding abilities.</li><li>Experienced with precision measuring instruments, both digital and analog.</li><li>Can read and understand drawings and specifications with above average understanding of geometric tolerancing and dimensioning (GD&amp;T).</li><li>Knowledge of work holding, tool holding, and tooling equipment used in CNC working environment.</li><li>Must possess above average math skills.</li><li>Must possess basic computer skills.</li><li>Must be able to lift 50 lbs.</li><li>Must be able to adapt to frequent change, delays or unexpected events with a positive and constructive attitude.</li><li>Must be willing and able to work flexible hours due to changing work schedules and demands.</li><li>Must possess strong English communication skills (oral and written) as it relates to the job.</li><li>Must be able to produce parts to deadlines, accurate to the print and with a quality finish.</li></ul>

CNC Multi-Axis Machinist in North Carolina - Relocation $ Provided

22nd August, 2024 Our customer in Sanborn, NY is looking for a seasoned CNC Machinist to join their manufacturing team. Job Summary: The CNC Machinist will be responsible for setting up, operating, and maintaining CNC machines to produce high-precision parts and components. The ideal candidate will have a strong understanding of machining processes, the ability to read technical drawings and experience with various CNC machinery. This is an on-site/full-time/direct hire position Salary range based on experience: $25-30/hr Key Responsibilities: <ul> <li>Setup and Operation: Set up and operate CNC machines including mills, lathes, and grinders according to specified instructions, blueprints, and technical drawings.</li> <li>Programming: Create and modify CNC programs using G-code or CAM software. Make adjustments to programs as needed to ensure accuracy and efficiency.</li> <li>Quality Control: Inspect and measure finished parts using precision tools (micrometers, calipers, gauges) to ensure they meet the required specifications and tolerances.</li> <li>Maintenance: Perform routine maintenance on CNC machines to ensure they are in good working order. Troubleshoot and repair minor mechanical issues as they arise.</li> <li>Documentation: Maintain accurate records of work performed, including setup sheets, inspection results, and machine maintenance logs.</li> <li>Safety: Adhere to all safety protocols and company policies to ensure a safe working environment. Wear appropriate personal protective equipment (PPE) and follow machine handling procedures.</li> </ul> Qualifications: <ul> <li>Education: High school diploma or equivalent. Completing a vocational training program or an associate degree in machining or a related field is preferred.</li> <li>Experience: Minimum of 8 years of experience as a CNC Machinist or in a similar role.</li> <li>Skills: Proficiency in reading and interpreting technical drawings and blueprints. Strong understanding of CNC machine operation, programming, and tool selection.</li> <li>Technical Knowledge: Familiarity with G-code programming and CAM software. Ability to use precision measuring instruments accurately.</li> <li>Attention to Detail: High level of accuracy and attention to detail in all machining and quality control aspects.</li> <li>Problem-Solving: Strong troubleshooting skills and ability to resolve technical issues effectively.</li> </ul> Physical Requirements: <ul> <li>Ability to lift and move heavy materials (up to 50 pounds) as needed.</li> <li>Good manual dexterity and hand-eye coordination.</li> <li>Ability to stand for extended periods and work in a manufacturing environment.</li> </ul> Applicants must be authorized to work in the U.S. We are an equal-opportunity employer. We do not discriminate in hiring or employment against any individual based on race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

18 CNC Machinist Jobs in New York