field_remote_option

field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

field_job_salary_range

Summary: Responsible for setting up and operating computer numerically controlled lathes to perform machining operations such as turning, boring, contouring, facing, and threading parts such as castings, forgings, and bar stock by performing the following duties. Responsible for setting up and operating CNC machines and inspecting work to print. Duties and responsibilities include, but are not limited to, the following: <ul><li>Reads process sheets, blueprints, and sketches of parts to determine machining to be done, dimensional specifications, set-up, and operating requirements;</li><li>Edits pre-written programs with supervision when necessary;</li><li>Edits program for process improvements and troubleshooting;</li><li>Mount work pieces in chuck, to face plate, or to fixtures;</li><li>Selects and installs preset tooling in tool posts, turrets or cutters, and automatic tool change magazine, in sequence specified on process sheet;</li><li>Initiate machining operation;</li><li>Observes numerical control displays on control panel and compares with data on process sheet to verify dimensional adjustments, feed rates, and speeds of machining cuts;</li><li>Turns dials and switches to override program and correct machine performance;</li><li>Inspects first run piece and spot checks succeeding pieces for conformance to specifications using operation certification knowledge;</li><li>Studies job packets and organizes materials for next order during cycles to reduce cycle and setup time;</li><li>Pre-sets tools before positioning them in lathe;</li><li>Sets up and operates another machine tool during machining cycles;</li><li>Machines metallic and nonmetallic materials;</li><li>Sets up and operates CNC machines using set-up sheets and written instructions with minimal supervision;</li><li>Utilizes all types of inspection instruments to check work per print without supervision; </li><li>Possesses knowledge of various cutting tools and has ability to determine various machine speeds and feeds;</li><li>Performs basic equipment maintenance; </li><li>Owns basic checking skills and hand tools at minimum; </li><li>Through training, understands shop routers and SPC charts and product acceptance through operator verification; </li><li>Other duties as assigned.</li></ul>Supervisory Responsibilities: Not applicable. Skills and Experience: High School diploma or GED. Minimum of three (3) year machine shop experience with five (5) years CNC experience; or equivalent combination of experiences. Ability to interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence and speak effectively before groups of customers or fellow associates. Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry as well as trigonometry and general math concepts (fractions, percentages, ratios, and proportions) to practical situations. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Preferred Skills and Experience: Lean Training, 5S Training, familiar in working within a network environment. Experience with Mazak machines and controls. (Conversational and "G" Code) Experience in using and selecting cutting tools, insert tools, speeds &amp; feeds and use of a variety of measuring equipment. Physical Demands/Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of the job, the employee is regularly required to talk or hear. The employee is frequently required to sit and occasionally required to stand, walk, and use hands to finger, handle, feel or lift objects, tools, or controls; and talk or hear. The employee is occasionally required to climb, balance, stoop, kneel, and/or crouch. Job responsibilities demand exposure to the production floor. The employee will regularly work near moving mechanical parts. The employee will occasionally be exposed to fumes or airborne particles and will have the risk of electrical shock. Company lifting limitations will be enforced. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. The specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.

CNC Machinist - Lathe

Description The primary responsibility for this position is to run equipment to produce machined parts to the drawings and specifications provided by the customer and internal staff in accordance with Wauseon Machine's quality management system and production schedule. Core Responsibilities: <ul><li> Operate lathes, Swiss, and/or mills (may include operating multiple pieces of equipment simultaneously to achieve rate goals).</li><li> Perform in-process inspection (using micrometers, calipers, comparators, various gauges, and CMM equipment) according to process documentation to produce high quality parts.</li><li> Change cutting tools and offset machines as needed.</li><li> Read basic blueprints.</li></ul> Qualifications: <ul><li> Strong math abilities (decimals, fractions, etc.).</li><li> Ability to stand for long periods of time.</li><li> Ability to lift up to 30 pounds.</li></ul> Preferred Experience: <ul><li> 2+ years of experience running CNC mills, lathes, and/or Swiss machines.</li><li> Knowledge of milling and turning operations, including G-code.</li><li> Experience in setup and programming of CNC lathes, mills, and/or Swiss machines.</li><li> CAD/CAM experience.</li><li> GD&amp;T experience.</li></ul>

CNC Machinist

Seemann Composites, LLC was founded on its research and development innovation with composite fabrication processes and revolutionized the composites industry with the invention of SCRIMP, Seemann Composites Resin Infusion Molding Process. Patented thirty-two (32) years ago, SCRIMP continues to be the manufacturing approach for a large assortment of customer-focused products developed by our team. Seemann Composites is recognized as a world leader in composites manufacturing, providing state of the art composite and polymer solutions and technologies. As a Critical Supplier to the United States Navy's Industrial Base, Seemann Composites develops and manufactures specialized products in support of the submarine fleets and amphibious programs, in new construction and fleet maintenance. Customer commitments provide a strong backlog of work across many platforms and programs. SCI seeks motivated individuals who desire to have a direct impact and participate in all aspects of product design, development, and manufacturing to support our War Fighters and National Defense. Seemann Composites 5 Axis CNC Machine Operators are proficient in Computer Numerically Controlled machinery, machine safety and accuracy to perform a variety of functions. The goal is to produce high quality parts and materials by understanding 5 Axis Machine setup and operations as well as positioning of tooling for safe and efficient operations. Seemann Composites CNC Machine Operators must also be proficient in 3 Axis CNC Machines as well as CNC Lathe, Waterjet and small mechanical lathe and milling machines. Job Requirements: <ul> <li>Determine the fixtures, attachments and tools necessary to complete jobs according to specifications, and mount them to machine prior to beginning cutting</li> <li>Discuss project specifications with engineers and supervisors to guarantee consistency between plans and products, and collaborate to modify designs when existing ones are not feasible</li> <li>Conduct all programming as required (in 3 Axis).</li> <li>Understand specifications of the task at hand and the desired result by reading mechanical drawings.</li> <li> Monitor the run time throughout the cycle of operations of each event. </li> <li>Modify machine speed, tooling and cutting style to ensure precision and accuracy of manufactured parts</li> <li>Oversee cutting process, make adjustments throughout each job, catch mistakes as they happen and take necessary measures to eliminate errors</li> <li>Supervise machine temperatures, ensure that machine has adequate warm-up and cool-down time between jobs and replace coolant periodically</li> <li>Review and interpret cutting plans, enter them into control outlets before jobs and alter them to correct mistakes when necessary </li> <li>Inspect all finished products for accuracy and uniformity to ensure product quality and uphold company reputation</li> <li>Perform daily, weekly and monthly maintenance tasks to ensure machine longevity, including lubrication, cleaning and tool replacement</li></ul>Qualifications <ul> <li> High school diploma or equivalent</li> <li> Must be able to obtain and maintain a security clearance At least two years of experience operating CNC machines</li> <li>Technical certificate preferred</li> <li>5 axis preferred</li> <li>Comfortable using tools and maintaining machinery</li> <li>Familiarity with programming and interpreting CNC software</li> <li>Strong troubleshooting and problem-solving abilities</li> <li>Values precision and enforces quality standards</li> <li>Must be able to follow written and oral instructions</li> <li>Ability to read a tape measure, calculate volume and use precise measurements</li> <li>Be detail oriented when performing tasks</li> <li>Possess good hand-eye coordination</li> <li>Resume detailing education and work history required for consideration</li> <li>Steady work history</li></ul>Essential Physical Requirements: Working in a manufacturing or warehouse environment, you will be walking, standing and engaging in movement throughout the day, and occasionally to frequently be required to lift items weighing up to 50 lbs. Due to a large variety of job duties (both routine and non-routine), certain duties also may involve, a variety of physical activities including bending, stretching, lifting, stooping, turning, twisting, pushing, pulling, raising arms above shoulders and head, standing working in enclosed areas, climbing stairs or ladders, and operating heavy equipment. The noise level in the work environment can vary but noise is usually low to moderate. You may be required to wear personal protective equipment such as safety glasses, safety gloves, hearing protection, a respirator or dust mask, protective footwear and protective clothing or uniforms. Work may be performed in cold and/or hot temperatures and the environment can be dusty. Physical requirements further include the ability to engage in productive collaborative communication with co-workers and work may need to be performed during non-standard hours, including nights and weekends. At times, the ability to work overtime also may be required. Prior to employment, applicants will have to successfully complete a criminal background check and a pre-employment drug test. Seemann Composites LLC. offers a competitive wage and comprehensive benefits plan including Health, Life, Disability, Retirement, paid vacation and sick leave. Equal Opportunity Employer To apply, go to <a href="http://www.seemanncomposites.com" target="_blank">www.seemanncomposites.com</a>

RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components, and essential systems for the industrial, defense, and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing, and manufacturing capabilities for the diversified industrial, aerospace, and defense markets. We currently have 56 facilities, of which 37 are manufacturing facilities in ten countries and our market capitalization is approximately $6.2 billion. Roles &amp; Responsibilities: <ul><li>Set up and operate Speed Lathes, Hone, and occasionally CNC lathes in order to meet daily production and quality requirements.</li><li>Must be able to interpret blueprints, setup machines, edit offsets within programs, and perform tool offset adjustments as required to machine specialty bearings.</li><li>Must be able to perform inspections of dimensions machined, including threads, inner diameters, outer diameters, lengths, widths and undercuts/grooves.</li><li>Must model safe behaviors.</li><li>Must follow company quality control standards to include in-process inspection and documentation.</li><li>Must be able to read and interpret engineering prints.</li><li>Must be able to give and receive written and oral instructions in English.</li><li>Must be able to make decisions, communicate effectively and work well with others in a team environment.</li></ul> Education: <ul><li>High School Diploma or GED.</li><li>Must be able to read and interpret engineering prints.</li><li>Must be able to give and receive written and oral instructions in English.</li></ul> Experience: <ul><li>Must have at least two years of current CNC lathe setup experience.</li></ul> Knowledge/ Skills/ Abilities: <ul><li>Formal CNC training desired.</li><li>Must be a quick learner.</li></ul> Physical &amp; Environmental Factors: <ul><li>Must be able to lift 25 pounds unaided. </li><li>Must wear protective toe with metatarsal guard footwear and safety glasses while working in the facility.</li></ul> **Please note that the salary range information is only applicable for California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee's pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Pay Range: $20 to $27/hour RBC Bearings is an Equal Opportunity Employer to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Reference #27.2 -1

CNC Machinist - 2nd Shift

Job Title CNC Programmer/Machinist Fabrication Technician About Canoo Canoo's mission is to bring EVs to Everyone and build a world-class team to deploy this sustainable mobility revolution. We have developed breakthrough electric vehicles that are reinventing the automotive landscape with pioneering technologies, award-winning designs, and a unique business model that spans all owners in the full lifecycle of the vehicle. Canoo is starting production and is distinguished by its pioneering and experienced team of technologists, engineers, and designers. With offices around the country, the company is scaling quickly and seeking candidates who love to challenge themselves, are motivated by purpose, and possess a strong desire to get things done. The "Canoo Way" Canoo's success is the direct result of our disciplined application of our core operating principles and drills, which are based on three main principles: Think 80/20 ("Important versus less important"), Act 30/30 ("Reduce waste and increase output"), and Live 90/10 ("We have each other's back"). We hire based on "MET" - Mindset, Equipment and willingness to Train - and seek individuals that take accountability and deliver results being Humble, Hungry to succeed, and Hunting for opportunities to win. We train our team to engage with each other by modulating between their intellect (iQ) and emotional intelligence (eQ) applying Facts, Finesse, and Force when they communicate. The principles and drills of the CANOO Way have been fundamental to our success, our ability to grow, continuously improve, innovate and are at the core of our day-to-day operations. Job Purpose Canoo is searching for a qualified CNC Programmer/Machinist Fabrication Technician to support Maintenance, Facilities, and Production teams. As a Fabrication Technician, you will weld, machine, turn parts on a lathe, CNC programming, assemble and fabricate assemblies/equipment, and repair/fabricate production equipment. Welding and experience working with machining equipment are needed. Able to create or work off of blueprint diagrams. All work is performed in accordance with established safety procedures and ensures compliance with engineering specifications and/or codes. Responsibilities (80s of the Position) <ul><li>Utilize skills in: welding (MIG), lathe turning, Mill (CNC), drill press, press brake, assembly and fabrication skills to support various projects within Canoo Maintenance Team and Manufacturing.</li><li>CNC Programming Mastercam and AutoCAD procedures/processes</li><li>Follow established safety procedures according to OSHA standards and company procedures.</li><li>Assess, analyze and estimate (time, effort and materials required) fabrication projects as needed.</li><li>Support Canoo Maintenance and Facilities team members and Production Team members in the execution of their job requirements.</li><li>Perform repair work including necessary disassembly and re-assembly of production equipment.</li><li>Coordinate efforts with Maintenance, Facilities, Production and Other Departments as needed.</li><li>Support equipment PM tasks per manufacturer recommended specifications.</li><li>Support troubleshooting intermittent/inconsistent mechanical failures on production equipment.</li><li>Identify best practices and create standards combining available information &amp; knowledge.</li><li>Follow plant safety and environmental policies and keep work areas clean and orderly.</li><li>Participates in regularly scheduled team meetings.</li><li>All other duties as required to support business needs.</li></ul> Required Experience <ul><li>Strong background in some or all the following: (required) <ul><li>Welding (MIG), machining (lathe, mills, drills, etc.), brakes and mechanical assembly experience.</li></ul></li><li>CNC Programming and AutoCAD Experience</li><li>High School Diploma or GED equivalent and at least 18 years or older</li><li>Must be able to communicate effectively with supervision and other personnel with the ability to create clear technical instructions.</li><li>Basic computer skills required (i.e., Microsoft Office Suite)</li><li>Able to function and work in a fast-paced manufacturing environment.</li><li>Demonstrate self-initiative and mechanical proficiency, leadership ability, and teamwork.</li><li>A willingness to work on alternate shifts and must demonstrate the ability to adapt to changes.</li><li>Be flexible to training, coaching, projects, and travel as needed.</li><li>Satisfactorily complete the Canoo hiring process requirements which include comprehensive assessments and background check.</li></ul>Preferred Experience <ul><li>Strong knowledge of pneumatics, hydraulics, print-reading, and mechanics.</li><li>Previous experience in Body, Paint, or Assembly in automotive or manufacturing environment</li><li>Background with Industrial Maintenance</li></ul>Travel Requirements <ul><li>Travel and/or overtime may be required.</li></ul>Physical Requirements for Physical Positions While performing the duties of this job, employees may be required to lift up to 25 or more pounds, stand, sit, bend/stoop, or operate office equipment or machinery. Reasonable Accommodations Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the position. What's Cool About Working Here... <ul><li>Meaningful, challenging work that will redefine automotive landscape and make EVs available to everyone </li><li>Comprehensive Health Insurance </li><li>Equity Compensation </li><li>Flexible Paid Time Off </li><li>Casual workplace with an unbelievable feeling of energy </li></ul>Canoo is an equal opportunity-affirmative action employer and considers all qualified applicants for employment based on business needs, job requirements and individual qualifications, without regard to race, color, religion, sex, age, disability, sexual orientation, gender identity or expression, marital status, past or present military service or any other status protected by the laws or regulations in the locations where we operate. We also consider qualified applicants with criminal histories consistent with applicable federal, state and local law. Any unsolicited resumes or candidate profiles submitted in response to our job posting shall be considered the property of Canoo Inc. and its subsidiaries and are not subject to payment of referral or placement fees if any such candidate is later hired by Canoo unless you have a signed written agreement in place with us which covers the applicable job posting. Canoo maintains compliance with the OFCCP. As such, please feel free to review the following information: <a href="https://www.dol.gov/agencies/ofccp/posters" target="_blank">https://www.dol.gov/agencies/ofccp/posters</a> <a href="https://www.dol.gov/agencies/olms/poster/labor-rights-federal-contractors" target="_blank">https://www.dol.gov/agencies/olms/poster/labor-rights-federal-contracto…</a> If you are a person with a disability needing assistance with the application process, please call (214) 529-8055 or email us at <a href="mailto:TalentAcquisition@canoo.com" target="_blank">TalentAcquisition@canoo.com</a> Equal Employment Opportunity Posters Equal Employment Opportunity Posters | U.S. Department of Labor (dol.gov) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

CNC Programmer/Machinist Fabrication Technician

Job Description WE ARE A PRODUCT COMPANY. WE ARE A PROCESS COMPANY. ABOVE ALL, WE ARE A PEOPLE COMPANY. The history of the Acushnet Company is tightly woven into the fabric of golf. From the start, we've been committed to enriching the experience of dedicated golfers through superior product performance, technological innovation, unmatched quality, and exceptional service. We are more than a collection of leading golf brands and products. We are a team united in our passion for the game. We are bridge builders who embrace our responsibility to leave our brands, businesses, communities, and the game of golf in a better position than when we started. Together we live by the credo, "Autograph your work with excellence." We earn our position as unrivaled leaders in every category in which we compete, striving for excellence in all that we do - from the performance and consistency of our products to our engagement with golfers and trade partners, to our commitment to creating a workplace built on diversity, inclusion, belonging and respect. Job Title: CNC Programmer/Machinist Summary: The CNC Programmer/Machinist is responsible for developing CNC programs using Solidworks, Mastercam and CIMCO Edit to support Operations and Research &amp; Development. This position is responsible for performing fabrication set-ups of all specialized tooling/equipment and process improvements including cycle time reductions and fixturing improvements to reduce set-up time. Responsibilities: Create all machining and inspection programs for R&amp;D and production dimpled hobs for CNC equipment including wire and sinker EDM. Create and enhance existing CNC programs for production parts, as well as ball mold cavities for CNC equipment such as milling machines and lathes. Optimize CNC programs, machining processes, and fixtures to support precision manufacturing of parts with extremely tight tolerances Troubleshoot broken or malfunctioning machines and equipment. Set up and operate CNC machines including CNC lathes, Twin Spindle lathes, and wire EDM. Select appropriate tooling and fixtures to support precision manufacturing. Complete tasks including dimensional and visual inspections to part specifications and make necessary program and process adjustments. Complete QA tasks including dimensional and visual inspections to part specifications and make necessary program and process adjustments. Work with QA technicians and R&amp;D engineers to development new inspection programs for CMM machines. Train machine operations to new associates. Support training development of associates on the operation of CNC equipment as required. Maintain operation of equipment and perform PMs as required. Additional Responsibilities: Additional duties as assigned. Education: Vocational school graduate of Machine Shop or Machine and Tool Technology or equivalent secondary school curriculum required. CNC Machinist training or successful completion of a CNC Machinist program at a Technical school required. Entry level Mastercam training required. Experience: Minimum 5 years experience in programming required. Minimum of 3 years experience in machining to include at least 2 years setting up CNC machines such as CNC lathes, 5 axis milling machines, CNC wire machines, and 5 axis ram EDM machines required. Requirements: Must be willing to work overtime to meet production schedules. Must maintain a positive work atmosphere by acting and communicating in a manner so that you get along with co-workers and management. Required to have own trade related tools to perform required tasks. Special Credentials/Skills: Preferred experience with HAAS, MATSUURA, MAZAK, NAKAMURA-TOME, FANUC, SODICK,HEXAGON, TRAK Must possess basic math skills to include but not limited to adding, subtracting, multiplication, division and geometry. Knowledge in use of precision measuring instruments and the application of such instruments to perform first article inspection. Instruments should include but not limited to calipers, ID and OD micrometers, depth gages, indicators, scales and CMM.Demonstrate strong understanding of blue print reading and geometric tolerancing. Must be adept at developing and modifying <ul> <li>Demonstrated mechanical skills techniques</li> <li>Knowledge of hydraulic and/or electrical schematics</li> <li>Knowledge of plumbing and piping</li></ul>

CNC Programmer/Machinist - Engineering & Technology Center - 1st Shift

We are seeking a skilled CNC Machinist to join our team. The ideal candidate will have in multi-Axis lathes preferably in Doosan and Okuma turning centers and possess strong mechanical knowledge. - Set up and operate CNC machines to perform tasks such as drilling, milling, etc. - Read and interpret technical drawings to ensure accurate production - Conduct quality checks using calipers and other measuring instruments -Setup and operate multi-axis lathe. Qualifications: - Proficiency in CNC machining processes - Basic math skills for measurements and calculations -Ability to use calipers and other measuring tools accurately - Mechanical aptitude for troubleshooting machine issues This position offers the opportunity to work in a dynamic manufacturing environment where your skills will be valued and developed. If you meet the qualifications and are ready to contribute to our team, we look forward to reviewing your application.

CNC Machinist Setup/Operator

Description This position will be within the Innovative Machine and Manufacturing group (IMM). The nature of the work can consist of R&amp;D, job shop, repair, or production styles of machining with both CNC and manual methods being used. Reliable individual and good mechanical aptitude who is willing to learn, work safely, follow instructions, but is also self-motivated to work independently when required. Must be flexible to work on multiple jobs or single long projects. Our company believes in the Ideal Team Player. We follow the model behaviors of Humble (quick to point out the contributions of others), Hungry (self-motivated and diligent), Smart (socially appropriate and aware), Safety-Minded (works to lower safety risks, Quality-Minded (take pride in their work) and Attendance (recognizes their presence is important). Requirements ESSENTIAL JOB DUTIES &amp; RESPONSIBILITIES: <ul><li> Machine parts within specifications from drawings or verbal instruction using both Manual and CNC Machines and tools</li><li> Operating CNC / Manual machines both Mill &amp; Lathe</li><li> Program CNC machines utilizing MasterCam tool pathing, optimizing current programs and make program changes via machine's user interface</li><li> Taking a project from a print or idea and turning it into a finished good from start to finish</li><li> Develop methods for manufacturing requested products in an efficient and cost-effective manner</li><li> Aid in improving overall lead times by increasing run rates, decreasing scrap, and implementing other systems to reduce waste</li><li> Assist in researching and developing process improvements and future methods</li><li> Collaborating with other machinists, operators, engineers, or customers daily</li><li> Develop and maintain preventative maintenance procedures for equipment</li><li> Create part and assembly designs / prints from scratch or modify designs using MasterCam software</li><li> Setup of CNC machines using multiple work holding styles like clamps, vices, or custom fixtures</li><li> Setup of program, tooling, and work holding for self-run project or for an operator</li><li> Reverse engineer products currently being sold while developing methods to manufacture</li><li> Accurately log time, materials and tooling used on jobs either by provided time log sheet or tablet</li><li> Deburring, quality control and checking of parts. Logging results</li><li>Willing to work overtime, occasionally on short notice</li><li> Punctuality and regular attendance</li></ul>NON-ESSENTIAL JOB DUTIES &amp; RESPONSIBILITIES: <ul><li> Delivering finished goods to local customers </li><li> Driving of company vehicle</li><li> Operate company forklift.</li><li> All other duties assigned.</li></ul>PHYSICAL DEMANDS &amp; WORK ENVIRONMENT: <ul><li> Physical ability to do work requires but not limited to bending, sitting and standing for 8+ hours</li><li> Physical ability to do work requires lifting 1 to 60 pounds</li><li> Must be able to drive a forklift and company vehicles</li></ul>COMPENTENCY, KNOWLEDGE, SKILLS &amp; ABILITIES: <ul><li> Able to problem solve, troubleshoot, and teach</li><li> Able to communicate effectively with management, outside vendors, and inner department personnel</li><li> Able to multitask while being detail oriented and well organized</li><li> Knowledge of R&amp;D </li><li> Being able to multitask while minimizing down time between multiple machine cycle runs</li><li> Able to work in a high pressure, demanding environment</li><li> Able to complete safety training and adhere to job specific safety protocols and procedures needed to work safely within the department</li><li> Able and willing to learn new skills and adapt to challenges</li><li> Good mechanical aptitude, safe use of hand and power tools</li></ul>EDUCATION &amp; EXPERIENCE: REQUIRED: <ul><li> High school degree or equivalent. </li><li> Field specific training with documentation. </li><li> Experience: 7+ years in related field.</li><li> Experience in Manual machining both mill and lathe.</li><li> Experience working with CNC mills.</li><li> Experience working with CNC lathes with live tooling and multi axis.</li><li> Able to use diverse types of measuring and inspection equipment. (Micrometers, calipers, depth gauges, etc.)</li><li> Advanced knowledge of: Milling, Turning, CNC control, tooling, feeds and speeds, tolerances, materials, dimensioning, cutting, grinding, drilling, tapping, and broaching.</li><li> Ability read and create schematics, drawings, and technical references.</li><li> Experience collaborating with CAD/CAM software. </li></ul>PREFERRED: <ul><li> Machinist, Tool &amp; Die or Toolmaker Journeyman's card. (NTMA, community college schooling or other)</li><li> Programing / Design with MasterCam software.</li><li> Knowledge of G&amp;M Codes for quick program edits and troubleshooting at CNC controller. </li><li> Experience with Haas Mill and Lathe CNC machines and controllers</li><li> Experience with 4 Axis + CNC Mills operations and programming</li><li> Knowledge of bar feeding and "lights out" style machining preferred.</li><li> Knowledge of welding. (Certifications or training a plus.)</li><li> Proficient with Microsoft Office Word and Excel</li></ul>ADDITIONAL INFORMATION: <ul><li> Must have a clean driver record to be able to drive company vehicle</li></ul>

Machinist / CNC Programmer

Job Type Full-time Description Primus Aerospace is looking for an Team Lead and CNC Setup Machinist to work at our Lakewood facility on 2nd shift. 2nd shift works the hours of 4:00 pm - 2:30 am Monday through Thursday. Primus Aerospace is a leading manufacturing partner to aerospace, defense &amp; space OEMs / Primes &amp; Tier I suppliers. The company specializes in producing high-tolerance, complex geometry parts; machined out of standard and exotic metals. Primus works directly with all major aerospace manufacturers (e.g., Boeing, Lockheed, Northrop) to provide components to mission critical civilian and defense programs. Job Purpose: The Team Lead is responsible for the performance and production of Primus Aerospace's manufacturing operations within their department. This includes the management and direction of production personnel and processes including production control, quality control, safety, ISO documentation and shipping and receiving. The Team Lead will work with internal teammates across departments to maintain customer satisfaction of assigned work orders. This position requires a hands-on team player with superior communication skills, providing a channel of communication between the shop floor, shift changes and office and building relationships with corresponding vendor staff while contributing to a positive teamwork environment. This person will also be responsible for testing and validating programs. They will set up the machines to run the program and then acclimate the CNC Operator(s) to operate the machines. The Setup Machinist is also responsible for program troubleshooting. Salary Range: $26 - $32/hour, plus 10% shift differential Team Lead CNC Setup Machinist Key Responsibilities and Accountabilities: • Manages department area production orders • Creates an inspiring team environment with an open communication culture • Listen to team members feedback and resolve any issues or conflicts • Ensures tooling support of machines for production transition and sustained efforts • Establishes, maintains, and improves processes/procedures to support the promotion of consistent current and common tool sets &amp; processes across the organization • Monitors and manages risk items to ensure mitigating actions are effective and timely and promotes Lean, Knowledge Management, and other process improvement initiatives as well as sharing of lessons learned and best practices throughout the organization • Continuous improvement by identifying process problems and developing solutions • Supervises employees involved in the daily operations of Machinists and the production of parts • Sets team goals and deadlines while delegating tasks to ensure achievement of established objectives • Trains, develops and coaches all employees of the department. Provides management leadership in hiring, firing and disciplinary recommendations. Monitors and reviews the performance of employees. Initiates corrective disciplinary action as necessary on a timely basis and in accordance with company policy • Directs activities so that products are manufactured on schedule and within quality standards and cost objectives. Monitor production schedule. Report and update management team on status of production schedule. Manage human and material resources to meet production targets • Manage standardized work practices • Motivate team members • Maintain safety throughout the plant. Manage schedule for safety training • Promote shop floor organization and plant cleanliness among all employees • Take responsibility for the care and use of all company-owned equipment which is part of the day-to-day work function • Identify training needs and participate in company training programs as required. • Multi-task to manage several projects • Will be responsible for running a machines during shift • Focus on continuous improvement • Setting up CNC Mills and/or Lathes • Confirms proper router and drawing to correct revision • Reviews the program specifications to determine the sequence of set-up operations and dimensions of finished product • Establishes a strong and reliable set-up for operators to follow, as well as fills out the proper instructions for the operator to follow • Recognize high performance • Verify/meet expected cycle times and production expectations daily • Keep scrap to 2% minimum • Validate part quality through IPIC chart completion and verification • Ensure tooling / back-up tooling is adequate • Organization/cleanliness of work areas including support of a 5S program • Work in close collaboration with our programming and operations teams • Suggest and organize team building activities • Other duties as assigned Requirements Must-haves: • Strong ability to prioritize and multi-task • Superior MS Office knowledge, especially in Excel • Excellent communication skills, both verbal and written • Ability to delegate tasks • Thorough attention to detail • Knowledge of 5S principles and root cause analysis • Proven ability to lead and drive employee engagement and accountability • Solutions oriented • Capacity to analyze and problem solve • High self-initiative with the ability to work well under pressure • High School Diploma/GED with 3+ years of machining experience • Ability to set up CNC Mills and/or Lathes. Capability to set up both types is preferred • Knowledge of Geometric Dimensioning &amp; Tolerancing, print reading, and mathematics and manufacturing processes • Being a team player is essential to achieve success in this position • In-depth knowledge of performance metrics • Strong aptitude for organization and time management • Experience and confidence in making decisions Preferred: • Technical knowledge of the industry to effectively answer questions and guide employees in all facets of the production process. • Positive and professional attitude • Reliable • Experience decreasing turnaround times • Ability to streamline work processes • Understanding of ISO standards is desired. • Minimum of three (3) years' experience as a CNC set-up machinist • 3-axis Mastercam programming experience a plus • Have tools, indicators, micrometers, calipers, deburring tools, etc. IMPORTANT NOTICE: To adhere to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce. Our work environment is fast-paced and professional while providing continued growth fostered by our commitment to teamwork. Salary Description $26-32/ hour

CNC Setup Machinist - Team Lead (Nights)

StackTeck, with over five decades of mold building innovation, is a leading source of high productivity tooling solutions for the injection molding industry. StackTeck supplies a wide range of injection molds and IML automation used to produce plastic parts in applications such as caps, closures, medical, PET preforms, and thinwall packaging; as well as complete system integrations including IML. SUMMARY: The position of CNC High Speed Milling Machinist will accurately set up and operate a high precision, multi-axis mill machining center to fabricate metallic components based on drawing specifications, and tight finishing tolerances. This position reports to the Manufacturing Manager, Finishing Department. Shift times: Friday to Sunday 3:30 pm to 4:00 am WHAT WE OFFER: <ul><li>We are hiring for weekend shift. Competitive shift Premiums.</li><li>Convenient location with quick 407 and 427 highway access and public transit to our door</li><li>Uniform service provided including safety shoes/boots and eye protection</li><li>Overtime opportunities available after 40 hours</li><li>Bright, clean, air conditioned office and production environment.</li><li>Competitive compensation based on experience</li><li>Educational Assistance Program including training, development and post-secondary education with reimbursement.</li><li>Company matching contributions to RRSP group plan</li><li>Comprehensive group benefit plan including medical, dental, life insurance coverage and a generous HCSA</li><li>Employee Assistance Program</li></ul> MAJOR RESPONSIBILITIES: <ul><li>Setting up and operate a CNC Precision Mill</li><li>Interprets drawings, and specifications to determine dimensions, tolerances, and sequence of specific machining operations</li><li>Load and edit control media to optimize and/or correct machine performance</li><li>Calculates and set controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control elements.</li><li>Starts and observes machine operation to detect malfunction and adjusts machine controls or control media as required.</li><li>Through the use of precision measurement tools to verify conformance of finished work piece to specifications with tolerances as low as +/- .001 to +/- .0002.</li><li>Conduct routine maintenance on equipment</li><li>The proper maintenance of the machine and housekeeping of their work area.</li></ul> MINIMUM QUALIFICATIONS: TECHNICAL SKILLS/EXPERIENCE <ul><li>College Diploma or Certified Apprenticeship program in General Machining, Tool &amp; Die or Mould Maker preferred or Mechanical Technician Diploma</li><li>Minimum 5+ years of recent experience operating a High Speed Finishing Mill to extremely tight tolerances</li><li>Experience operating Roder milling machines a strong asset.</li><li>Proven knowledge interpreting engineering drawings and use of hand measuring tools (calipers, micrometers, etc)</li><li>Ability to work in a high precision, fast paced environment.</li></ul> In accordance with the Accessibility for Ontarians with Disabilities Act, (AODA), StackTeck will provide accommodation, accessible formats, and communication supports for the recruitment process upon request.

451 CNC Machinist Full Time Jobs