field_job_employment_type

field_job_occupational_field_parents_all

job_organization_name

field_job_salary_range

PRIMARY FUNCTIONS The primary functions include operating multi-axes computer numerical control (CNC) milling machines or lathes to machine surfaces of metallic and nonmetallic work pieces. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each of the Major Responsibilities, including the following: • Loads material in machine. Starts machine and observes cutting operation • Ability to finish set up of a machine with minimal assistance and within a reasonable time frame • Makes offsets independently to finish the set-up process • Sets up and replaces tools without supervision • Recognizes tool wear before dimensions are affected • Ability to make basic changes to programs on machines • Compares numerical data display with specifications on operations sheet • Adjusts tool lengths and fixture offsets if required • Monitors tooling usage for maximum cost effectiveness • Responsible for the accuracy and quality of the part • Ability to understand and document requirements of Inspecting Plans • Authorized to stop processes to ensure quality • Responsible for machine turnovers to adjacent shift operators • Works overtime as required • Other duties as assigned EDUCATION and/or EXPERIENCE: Associate degree or equivalent from two-year college or technical school; or at least one-year related experience and/or training LANGUAGE SKILLS: • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, routers and inspections procedures • Ability to read and interpret blueprints • Ability to read and understand G and M code programming MATHEMATICAL SKILLS • Ability to work with mathematical concepts such as fundamentals of plane and solid geometry and trigonometry or ability to use a trig book. • Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations preferred. REASONING ABILITY: • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. • Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. OTHER QUALIFICATIONS: • Demonstrates mechanical aptitude • Operates basic measuring equipment such as micrometers, calipers, surface plate checks and optical comparators. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to sit and talk or hear. The employee is occasionally required to stand; walk; use hands to handle or feel; reach with hands and arms; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, depth perception and ability to adjust focus. Lincotek Medical provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Employment is contingent upon successfully passing both Background and Drug Pre-Employment Screenings

CNC Machinist

Experienced CNC Machinist/Programmer Reports to: Machining Manager PRIMARY FUNCTION To set up and operate Computer Numerical Controlled (CNC) VMC, HMC, Lathe and/or Vertical Turning Lathe (VTL) machining centers to machine metallic and nonmetallic parts. We are especially seeking a Machinist with significant programming experience. TRAINING AND EXPERIENCE REQUIRED <ul><li>Seeking a highly motivated, skilled, experienced CNC VMC, HMC and or lathe / VTL machinists</li><li>Vocational education and/or 5-10 years of experience in a Job Shop, non-production environment preferred</li></ul> ESSENTIAL FUNCTIONS <ul><li>Plans machining by studying work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&amp;T).</li><li>Plans stock inventory by checking stock to determine amount available; anticipating needed stock.</li><li>Generates CNC programs by entering instructions, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs.</li><li>Set-up of CNC machines by installing and adjusting, tools, attachments, collets, vices, stops, and stock pushers; tramming heads.</li><li>Loads feed mechanism by lifting stock into position.</li><li>Knowledge and use of lifting devices, overhead cranes, and fork-lift trucks.</li><li>Verifies settings and produces quality parts by measuring positions, first-run part, and sample workpieces; adhering to international standards and Ahaus standards.</li><li>Maintains specifications by performing drilling, milling, grooving, cutting and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes.</li><li>Maintains safe operations by adhering to safety procedures and regulations.</li><li>Maintains equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs.</li><li>Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs.</li><li>Documents actions by completing production and quality logs.</li><li>Updates job knowledge by participating in educational opportunities; reading technical publications.</li><li>Accomplishes organization goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments.</li><li>Conceptual Skills, Process Improvement, Verbal Communication, Functional and Technical Skills, Controls and Instrumentation, Tooling, Coordination, Attention to Detail, Judgment</li><li>Other duties may be assigned.</li></ul> WORKING CONDITIONS Machinists may be subject to the following: <ul><li>High noise levels from machinery</li><li>Fumes, dust, vapors, mist</li><li>Coolants, oils, cutting fluids, and other chemicals</li></ul> You should be proficient in: <ul><li>G-Code </li><li>Manual Machining Skills</li><li>CAD/CAM Software</li></ul> Machines &amp; technologies you'll use: <ul><li>CNC Mill (3-4 axis VMC) (Fanuc, Mazak, Haas, Okuma, Makino)</li><li>CNC Lathe (2-4 axis) (Haas)</li><li>CNC Mill (5+ axis VMC) (Mazak)</li><li>Horizontal Machining Center (3-4 axis) (Okuma, Makino)</li><li>Vertical Lathe (Toshiba)</li></ul> Salary info: $25 - $30 / hr

CNC Machinist/Programmer

CNC Machinist - Night Shift

Summary: Responsible for setting up and operating computer numerically controlled mills to perform machining operations such as boring, milling, contouring, facing, and threading parts such as castings, forgings, and bar stock by performing the following duties. Responsible for setting up and operating CNC machines and inspecting work to print. Duties and responsibilities include, but are not limited to, the following: <ul><li>Reads process sheets, blueprints, and sketches of parts to determine machining to be done, dimensional specifications, set up, and operating requirements;</li><li>Edits pre-written programs with supervision when necessary;</li><li>Edits program for process improvements and trouble shooting;</li><li>Mounts work pieces in chuck, or to faceplate or fixtures;</li><li>Selects and installs preset tooling in tool posts, turrets or cutters, and automatic tool change magazine, in sequence specified on process sheet;</li><li>Initiates and performs machining operation;</li><li>Observes numerical control displays on control panel and compares with data on process sheet to verify dimensional adjustments, feed rates, and speeds of machining cuts;</li><li>Turns dials and switches to override program and correct machine performance;</li><li>Inspects first run piece and spot checks succeeding pieces for conformance to specifications using operation certification knowledge;</li><li>Studies job packets and organizes materials for next order during cycles to reduce cycle and setup time;</li><li>Pre-sets tools before positioning them in mill;</li><li>Sets up and operates another machine tool during machining cycles;</li><li>Machines metallic and nonmetallic materials;</li><li>Sets up and operates CNC machines using set-up sheets and written instructions with minimal supervision;</li><li>Ability to use all types of inspection instruments to check work per print without supervision; </li><li>Possess knowledge of various cutting tool and has ability to determine various machine speeds and feeds;</li><li>Performs basic equipment maintenance; </li><li>Through training, understands shop routers and SPC charts and product acceptance through operator verification; </li><li>Other duties as assigned.</li></ul>Supervisory Responsibilities: Not applicable. Skills and Experience: High School diploma or GED. Minimum of three (3) year machine shop experience with five (5) years CNC experience; or equivalent combination of education and experience. Ability to interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence and speak effectively before groups of customers or fellow associates. Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry as well as trigonometry and general math concepts (fractions, percentages, ratios, and proportions) to practical situations. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Preferred Skills and Experience: Lean Training, 5S Training, familiar in working within a network environment. Experience with Hurco machines and controls. (Conversational and "G" Code) Experience in using and selecting cutting tools, insert tools, speeds &amp; feeds and use of a variety of measuring equipment. Physical Demands/Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of the job, the employee is regularly required to talk or hear. The employee is frequently required to sit and occasionally required to stand, walk, and use hands to finger, handle or feel objects, tools, or controls; and talk or hear. The employee is occasionally required to climb, balance, stoop, kneel, and/or crouch. Job responsibilities demand exposure to the production floor. The employee will regularly work near moving mechanical parts. The employee will occasionally be exposed to fumes or airborne particles and will have the risk of electrical shock. Company lifting limitations will be enforced. The employee must regularly life and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. The specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.

CNC Machinist - Mill

Summary: Responsible for setting up and operating computer numerically controlled lathes to perform machining operations such as turning, boring, contouring, facing, and threading parts such as castings, forgings, and bar stock by performing the following duties. Responsible for setting up and operating CNC machines and inspecting work to print. Duties and responsibilities include, but are not limited to, the following: <ul><li>Reads process sheets, blueprints, and sketches of parts to determine machining to be done, dimensional specifications, set-up, and operating requirements;</li><li>Edits pre-written programs with supervision when necessary;</li><li>Edits program for process improvements and troubleshooting;</li><li>Mount work pieces in chuck, to face plate, or to fixtures;</li><li>Selects and installs preset tooling in tool posts, turrets or cutters, and automatic tool change magazine, in sequence specified on process sheet;</li><li>Initiate machining operation;</li><li>Observes numerical control displays on control panel and compares with data on process sheet to verify dimensional adjustments, feed rates, and speeds of machining cuts;</li><li>Turns dials and switches to override program and correct machine performance;</li><li>Inspects first run piece and spot checks succeeding pieces for conformance to specifications using operation certification knowledge;</li><li>Studies job packets and organizes materials for next order during cycles to reduce cycle and setup time;</li><li>Pre-sets tools before positioning them in lathe;</li><li>Sets up and operates another machine tool during machining cycles;</li><li>Machines metallic and nonmetallic materials;</li><li>Sets up and operates CNC machines using set-up sheets and written instructions with minimal supervision;</li><li>Utilizes all types of inspection instruments to check work per print without supervision; </li><li>Possesses knowledge of various cutting tools and has ability to determine various machine speeds and feeds;</li><li>Performs basic equipment maintenance; </li><li>Owns basic checking skills and hand tools at minimum; </li><li>Through training, understands shop routers and SPC charts and product acceptance through operator verification; </li><li>Other duties as assigned.</li></ul>Supervisory Responsibilities: Not applicable. Skills and Experience: High School diploma or GED. Minimum of three (3) year machine shop experience with five (5) years CNC experience; or equivalent combination of experiences. Ability to interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence and speak effectively before groups of customers or fellow associates. Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry as well as trigonometry and general math concepts (fractions, percentages, ratios, and proportions) to practical situations. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Preferred Skills and Experience: Lean Training, 5S Training, familiar in working within a network environment. Experience with Mazak machines and controls. (Conversational and "G" Code) Experience in using and selecting cutting tools, insert tools, speeds &amp; feeds and use of a variety of measuring equipment. Physical Demands/Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of the job, the employee is regularly required to talk or hear. The employee is frequently required to sit and occasionally required to stand, walk, and use hands to finger, handle, feel or lift objects, tools, or controls; and talk or hear. The employee is occasionally required to climb, balance, stoop, kneel, and/or crouch. Job responsibilities demand exposure to the production floor. The employee will regularly work near moving mechanical parts. The employee will occasionally be exposed to fumes or airborne particles and will have the risk of electrical shock. Company lifting limitations will be enforced. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. The specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.

5 CNC Machinist Jobs in Eaton, OH 45320, USA