field_remote_option

field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

field_job_salary_range

CNC Machinist (Mills) Regular, Full-Time; Non-Exempt Camarillo, CA. About AllClear Aerospace &amp; Defense AllClear Aerospace &amp; Defense is the military aviation aftermarket industry's leading provider of mission-ready solutions. We provide excellence in sustainment for the U.S. militaries and its allies. Headquartered in Miramar, Florida, AllClear's sustainment solutions cover over 25 of the most utilized military aircraft platforms, supported with distribution agreements from leading OEMs, in-house and managed repair services, engineered products, manufacturing, and logistics solutions. AllClear represents more than 30 years of defense aerospace sustainment experience and expertise, focused on the bigger mission mindset of keeping militaries mission ready. AllClear locations include Abu Dhabi, UAE; Camarillo, CA; Cambridge, UK; Chatsworth, CA; Greenville, SC; Macon, GA; Miramar, FL; Seoul, S. Korea; Singapore; South San Francisco, CA; and Tokyo, Japan. To learn more visit GoAllClear.com. Summary The CNC Machinist has the primary responsibility of operating computer numeric controlled production equipment to produce quality parts. Must be able to set up and operate 4-axis and 5-axis mills and lathes. Most machining and set ups are performed on HAAS CNC equipment. Essential Duties and Responsibilities Under general supervision, must be able to perform a variety of job duties including, but not limited to: <ul><li>Sets up and runs various types of NC machines including mills and lathes, to complete parts to dimensional requirements.</li><li>Loads machine control tape, checks and makes required control settings. Places machine in operation and observes proper traverse to starting point before beginning operation.</li><li>Operates machine in manual mode to make unprogrammed changes where location can be determined by direct measurement.</li><li>Manually enters dimensional data into numerical control console for short run jobs or during the machining cycle as necessary.</li><li>Performs rework wherein the operations are essentially the same as described above.</li><li>Grinds, sharpens and touches up own cutting tools as required.</li><li>Develop shop aid tools to support machining and assembly processes. </li><li>Must have working knowledge of all codes and functions of numerical control machines. </li><li>Make adjustments and troubleshoot machine as needed.</li><li>Performs first article, in-process and final dimensional inspections per blueprint for quality approval. </li><li>Perform regular PMs on equipment to ensure equipment is safe and operating effectively. </li><li>Take the initiative to identify problems, develop alternative and proactive solutions and gather/present information in a timely manner. </li><li>Perform other duties as assigned.</li></ul> In addition to the above, Machinists are to maintain an organized, clean, and safe work area using safety standards and expectations while adhering to all quality practices. AllClear is an Equal Opportunity Employer. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Education and Experience <ul><li>High School Degree or General Education Degree; or 3-5 years of related experience and/or training; or equivalent combination of education and experience</li><li>Previous experience in the aerospace industry highly desired. </li><li>Certification in machine shop technology, blueprint reading and programing, highly desired.</li><li>Experience with programming software, specifically MasterCam, highly desired. </li></ul>Required Skills: <ul><li>Language: Ability to read and comprehend simple instructions, short correspondence, and memos.</li><li>Reasoning Ability: Ability to apply a general understanding to carry out detailed, written and oral instructions. Ability to deal with and solve problems involving a few concrete variables in standardized situations.</li><li>Mathematical Ability: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.</li><li>Other Abilities: Must be able to use shop tools, handbooks, tables, and charts. Must know proper rakes and clearances of tool bits and drills. Must have proficiency in using precision measuring instruments, such as calipers, micrometers, depth gauges, tape measure, indicators, etc. Must be able to read and interrupt detailed blueprints and work orders. Must be proficient with the operations of manual mills, lathe, drill presses, routers, band saws, belt sanders, table saws. Must be able to setup and operate one or more manufacturing machines, including a CNC lathe, mill drill, grinding machine, CNC mill machine and deburring. </li></ul> Physical Demands/ Work Environment: <ul><li>While performing the duties of this job, the employee must be able to stand and sit 6 to 8 hours a day. Must be able to work with their hands, arms and be extremely accurate. Must be able to walk, sit, stoop, or kneel on a regular basis. The employee must frequently lift and/or move up to 25 pounds. Must be able to lift and/or move up to 40 pounds on an occasional basis. </li><li>While performing the duties of this job, the employee is regularly exposed to moving high-speed machinery and mechanical parts. The employee is occasionally exposed to wet and/or humid conditions. outside weather conditions, machine oils, metal fillings, acetone, paints, solvents, grease, cutting fluids, fumes, or airborne particles, toxic or caustic chemicals, and risk of electrical shock or vibration. The noise level in the work environment is usually moderate to loud. </li></ul>Salary Description $24 - 30 DOE

CNC Machinist

Pay scale: 34.00-40.00 per hour About Prototek Prototek is a leading national provider of digital based manufacturing services including CNC machining, precision sheet metal fabrication, EDM, and additive manufacturing services. Prototek serves a variety of customer end markets, including aerospace, defense, medical, robotics, electronics, consumer, and general industrial. Prototek has manufacturing locations across the United States including facilities in New Hampshire, Wisconsin, California, Colorado, and Pennsylvania. Prototek is ISO 9001:2015 and AS9100D:2016 certified as well as ITAR Registered. For more information, visit <a href="http://www.prototek.com" target="_blank">www.prototek.com</a>. The role of the CNC Machinist III is to use advanced machining techniques and processes to produce accurate and quality parts. This position has attained full proficiency as a CNC Machinist II and can successfully execute machining and programming strategies for multifaceted jobs with minimal technical assistance. This position acts as a mentor to less experienced CNC department personnel, sharing guidance and knowledge of machining procedures. The ability to organize multiple projects and apply high level critical thinking skills is crucial for success. ESSENTIAL FUNCTIONS:<ul><li>Independently perform the highest level of complex machining and programming activities in line with company capabilities</li><li>Be sought out to provide training and/or solutions to less experienced machinists</li><li>Design custom fixtures for production use</li><li>Apply lathe concepts to machine parts more efficiently</li><li>Apply basic true 5th axis machining concepts</li><li>Assist in researching and evaluating new equipment and techniques for departmental enhancements</li><li>Collaborate with Project Managers on project scope, time, and costs for quoting purposes</li><li>Perform essential functions of Machinist II</li><li>Other duties as assigned</li></ul> TECHNICAL COMPETENCIES: <ul><li>Proficient knowledge of 2D and 3D programming and multi axis (3+1 and/or 3+2 indexing) machining</li><li>Advanced knowledge of Lathe concepts including live tooling and dual spindle operations</li><li>Proficient knowledge of complex fixturing techniques</li><li>Proficient knowledge of print reading, high tolerance machining and geometric dimensioning</li><li>Proficient knowledge of shop mechanics, mathematics, and measurement</li><li>Proficient knowledge of material properties</li><li>Proficient knowledge of commonly used hand and power tools</li><li>Basic computer literacy, including Fusion 360 or related CAM software</li></ul> BEHAVIORAL COMPETENCIES: <ul><li>Excellent written and verbal communication skills to collaborate with team members</li><li>Demonstrates motivation and accountability to achieve individual and department goals</li><li>Possesses initiative and personal accountability to meet work demands and work effectively under pressure with limited supervision</li><li>Exercises sound judgement in ambiguous situations when time is critical </li><li>Grasps basic concepts, anticipate possible problems and generate solutions with basic problem-solving skills </li><li>Ability to respond and adapt quickly to changing circumstances and facility needs</li><li>Possess an attention to detail and commitment to effectively produce quality work</li><li>Demonstrates teamwork by sharing knowledge and helping where needed</li></ul> EDUCATION &amp; PROFESSIONAL EXPERIENCE:<ul><li>High School Diploma required</li><li>2-year Machining Degree preferred</li><li>5 years' experience with Sac EDM or 7+ years of relevant machining experience (programming, setup, and running equipment) in a related industry</li></ul> PHYSICAL REQUIREMENTS:<ul><li>Ability to walk and stand for extended periods of time </li><li>Ability to use hands and fingers to operate computers, equipment, hand/power tools, etc. and handle and feel parts of various size</li><li>Ability to bend, kneel and crouch occasionally throughout a shift</li><li>Ability to push, pull or lift 50 lbs. moderately throughout a workday, occasionally 50+lbs with a team lift</li><li>Ability to focus vision for: close vision, color vision, depth perception and adjusting to sharp focus</li></ul> WORK ENVIRONMENT:<ul><li>Fast-paced environment </li><li>Noise conditions can be moderate to extreme. Hearing protection will be provided if needed and/or by request</li><li>Exposure to fumes and/or airborne particles </li><li>Moving mechanical parts and vibrations</li><li>Exposure to hot metal and machining components</li><li>Exposure to various types of coolants and oils</li></ul> WORK HOURS:<ul><li>1st Shift Work Schedule: 5 - 8-hour shifts</li><li>Overtime as necessary</li><li>Flexible scheduling in agreement with supervisor</li></ul> What Prototek Offers:<ul><li>Career advancement opportunities</li><li>Flexible Schedule </li><li>Competitive pay scale</li><li>Paid time off (PTO) starting at 80 hours with annual increase for each year of service</li><li>9 paid Holidays annually</li><li>Education reimbursement program</li><li>Health, dental, vision, life and short-term disability insurance </li><li>Company paid life and long-term disability insurance </li><li>Employee Assistance Program (EAP) </li><li>401(k) match: 100% of 3% and 50% for 4% and 5%</li></ul>Work Authorization This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. We are an Equal Opportunity Employer, making decisions without regard to race, color, religion, sex, national origin, sexual orientation, gender, gender identity, veteran status, disability, or any other protected class. EEO is The Law - click here for more information: <a href="https://www.eeoc.gov/sites/default/files/migrated_files/employers/poster_screen_reader_optimized.pdf" target="_blank">https://www.eeoc.gov/sites/default/files/migrated_files/employers/poste…</a> We endeavor to make this site accessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process, please contact 603-746-2001 or email us: <a href="mailto:HR@PROTOTEK.COM" target="_blank">HR@PROTOTEK.COM</a>. You may also write to us and we will be happy to assist you with the application: Prototek, 205 Pine St., Hopkinton, NH 03229

CNC Machinist III

About the Organization PCX Aerosystems is a premier supplier of flight-critical mechanical systems and structures to leading aerospace OEMs and the US Government. With roots going back to the dawn of the helicopter age, PCX today is a private equity owned acquisition platform tasked with building a defense-focused, balanced portfolio of companies that manufacture, assemble and perform overhaul and repair services for a variety of fixed-wing and rotorcraft programs. Several of our businesses provide metal and composite components for space applications including satellites, spacecraft and rockets. Headquartered in Newington, Connecticut, we offer a competitive compensation &amp; benefits package and a business culture which rewards performance. For additional information on PCX Aerosystems, please visit our website at <a href="http://www.pcxaero.com" target="_blank">www.pcxaero.com</a>. Company Overview PCX Aerosystems currently has operations in Long Beach and Santa Ana, CA; Boylston, MA; and Newington, Enfield and Manchester CT. Each of these locations has a unique history, and we strive to maintain local entrepreneurial freedom, supported by the strength that comes from being part of a larger organization. Our workforce includes Associates in a wide variety of disciplines, including Engineering, Manufacturing, Program Management, Sourcing, Sales, Quality, Finance and Human Resources. The PCX Aerosystems teams seek to safely deliver on our customers' toughest requirements, while living our values, every day. We are a company that embraces diversity. EOE Statement PCX Aerosystems is an equal opportunity employer. Description General Summary: To machine precision aerospace components according to customer specifications while adhering to specific quality, production, and scheduling requirements. This position is available in first and second shift. This position qualifies for a $3K sign-on bonus. Essential Duties &amp; Responsibilities: <ul> <li>Able to read and understand work instructions such as, fixture alignment, tooling info and part loading instructions.</li> <li>Set-up and operate CNC lathe or multi-axis milling machining centers according to engineering specifications, instructions,</li> <li>GD&amp;T, and operation sheets. Knowledge of manual machines is a plus.</li> <li>Be able to pick up work offsets and tram tools to run true.</li> <li>Understand cutter compensation and can make the correct offset adjustment to ensure a quality part.</li> <li>Select appropriate cutting tools, fixtures and tool holders for a given job.</li> <li>Perform basic edits to G code to ensure product conformity.</li> <li>Read and interpret engineering instructions, travelers, and blueprints and be familiar with geometric tolerances and principles.</li> <li>Must perform routine maintenance on assigned production equipment, i.e., maintain cleanliness of work area and machinery, check machinery fluids and alert maintenance personnel and/or supervisor of malfunctions.</li> <li>Operate lifting and handling equipment such as hand truck, pallet jack, or overhead hoist to maneuver in-process or finished components to desired location.</li></ul> Compensation depends on experience - $30 - 40 Position Requirements Required Knowledge, Skills &amp; Abilities: <ul> <li>Knowledgeable of in-process inspection techniques, standards, and requirements. Able to use and interpret precision</li> <li>measuring devices such as micrometers, verniers, and various hand tools, i.e., gauges to verify the accuracy of dimensional characteristics of components.</li> <li>Knowledge of metal characteristics in a production setting is desirable.</li> <li>Knowledge of programming codes is helpful.</li> <li>Machinists must have good verbal and written communication skills; good math skills and good interpersonal skills.</li> <li>Must work well with colleagues, supervision and management.</li> <li>Ability to work and problem solve independently.</li></ul> Education &amp; Experience Required: <ul> <li>3-5 years CNC machining experience in a manufacturing environment, preferably aerospace.</li> <li>Fully capable of reading, understanding, and following written and oral work instructions in English.</li> <li>Ability to lift or transfer components or objects of no more than 50 pounds.</li> <li>Basic math skills.</li></ul> PCX is an equal employment opportunity employer. Shift Various Shifts Full-Time/Part-Time Full-Time Location PCX Aerosystems, Santa Ana Category Manufacturing Req Number MAN-24-00024 Position CNC Machinist Close Date Post Internal Days 0 Number of Openings 2 Exempt/Non-Exempt Non-Exempt Hiring Manager(s) Linda Nollau This position is currently accepting applications.

SR. CNC Machinist

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE TYPE: Secret TRAVEL: Yes, 10% of the Time Description At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. We are looking for you to join our team as a Machining Manufacturing Engineer based out of Sunnyvale, CA. You will support the manufacturing and testing of marine propulsion and power generations systems working on various manufacturing processes for high value gearing and steam turbine assemblies, machined components, and welded fabrications. What You'll get to Do: <ul><li>Develop new processes, improve existing manufacturing processes, and develop the required tooling and fixtures with an excellent team of experienced assembly mechanics, machinists, welders and engineers.</li><li>Adapts machine or equipment design to factory and production conditions.</li><li>Evaluate existing manufacturing processes and systems to reduce cost, improve sustainability and develop best practices within the manufacturing environment.</li><li>Develop efficient process flows and sequences of operations, optimized production area layouts, manage bills of materials, and create detailed work instructions, process procedures and tooling requirements with emphasis on safety, foreign object elimination and equipment/system maintenance.</li><li>Support continuous improvement initiatives and implementation of new capital equipment for establishing expanded production processes.</li><li>Select roles will also support final acceptance testing of product and provide technical support to test facility operation as necessary.</li><li>The ability to support multiple production shifts is required (first, second, third shifts, and weekends) based on the assignment and current and future production schedules.</li></ul>Basic Qualifications Principal Manufacturing Engineer: <ul><li>Bachelors in a STEM discipline (Science, Technology Engineering or Math) with 5 years of relevant work experience; master's degree in a STEM discipline with 3 years of relevant work experience. PhD with 1 Year with of relevant work experience.</li><li>Experience reading and interpreting engineering drawings.</li><li>Strong experience with machining and machine shops</li><li>Experience or specialization in mechanical assembly processes, welding and machining.</li><li>Experience in technical writing.</li><li>Ability to obtain Secret Clearance</li><li>U.S. Citizenship required.</li></ul>PREFERRED <ul><li>Hands on experience machining and troubleshooting of machines.</li><li>Experience measuring and analyzing precision parts. </li><li>Capable of programming CNC lathes, mills and/or grinders. </li><li>Experience with selecting and managing Capital Equipment (CapEX) projects for machinery.</li></ul>MANUMS SNYVLC DIVSE Salary Range: $97,500.00 - $146,300.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Employees may be eligible for a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO/AA and Pay Transparency statement, please visit <a href="http://www.northropgrumman.com/EEO" target="_blank">http://www.northropgrumman.com/EEO</a>. U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Machining Engineer Manufacturing

Job Type Full-time Description Job Title: CNC Machine Operator Company: Biomerics Location: Santa Clara, CA Position Type: Full-time Employee Hourly Rate: Starting $20, depending on experience. Swiss Machinist (Citizen models) 1st shift available. First shift hours- 6:00 AM - 2:30 PM Competitive Salary &amp; Benefits Biomerics provides contract manufacturing, laser processing, and finishing services to a wide range of industries with a strong commitment to customer service. Biomerics specializes in the most challenging machined and micromachined components, including those used in interventional and medical robotics applications. We pride ourselves on providing a supportive, positive work environment with opportunities for challenge and growth. Biomerics offers Swiss machining with integrated laser cutting on precision medical tubing. Laser/Swiss machining enables features to be machined and laser cut in the same process. Our core competency lies in smaller medical components, produced with high accuracy and repeatability. Traditional Swiss screw machining capability is also available for rapid prototyping and production. In addition, Biomerics utilizes five axis milling machines capable of producing complex finished components, while holding extremely tight tolerances. Job Description: Biomerics has immediate openings for talented CNC Machine Operator at our facility in Santa Clara, CA. Working in a team environment, this individual will ensure that automated manufacturing processes are producing optimal results. Representative Responsibilities: <ul><li>Prepare and operate machines to perform tasks such as drilling, grinding and milling, etc.</li><li>Understand specifications of the task at hand and the desired result by reading blueprints, mechanical drawings etc.</li><li>Translate instructions into computer commands so the machines can perform the correct function.</li><li>Prepare and load raw materials onto the machines.</li><li>Set up and run first pieces to verify that the machines produce outputs according to specifications.</li><li>Supervise the machines while they execute the tasks and make any necessary adjustments to produce a better result.</li><li>Inspect and measure finished products and compare them with requirements to determine if the process has been completed properly.</li></ul>Requirements Desired Skills, Talent, and Qualifications: • Previous experience working in a manufacturing setting. • Must have strong attention to detail. • Familiarity and skill with interpreting technical drawings and blueprints. • Ability to work independently and closely follow directions is essential. Benefits: Medical/Dental/Vision Insurance, Short-Term Disability, Long-Term Disability, Life Insurance, Paid Time Off, Paid Holidays, 401k Please, No Recruitment Agency calls or emails (we are not using recruitment services for this, or any other role posted). Biomerics does not accept non-solicited resumes or candidate submittals from search/recruiting agencies not already on Biomerics approved agency list. Unsolicited resumes or candidate information submitted to Biomerics by search/recruiting agencies not already on Biomerics approved agency list shall become the property of Biomerics and if Biomerics subsequently hire the candidate, Biomerics shall not owe any fee to the submitting agency. "Equal Opportunity Employer: Minority, Female, Protected Veteran, Individual with Disabilities are encouraged to apply." Salary Description Starting $20, DOE

CNC Operator -- Swiss screw machines

Job Details Job Location Arrowhead Products - Los Alamitos, CA Salary Range $36.63 - $36.63 Hourly Job Shift 2nd Shift Job Summary: This position will assist in the assembly, fabrication and weld preparation of Arrowhead Products metal ducting systems. It is a combination of the following jobs: CNC Lathe or CNC Mill Setup Specialist, Journeyman Machinist, or Tool Maker Specialist. Essential Duties and Responsibilities: <ul><li>Will perform close tolerance set-ups of CNC Lathes/Mills, Conventional Lathes/Mills and other Machine Shop Equipment to obtain maximum work output from machines while holding dimensional tolerances. </li></ul><ul><li>Will validate and optimize new CNC programs.</li><li>Will suggest improvements to old CNC programs (i.e. continuous improvement). </li><li>Will be capable of starting a tool and completing it to final approval.</li><li>Will perform grinding of own form tools. </li><li>Will perform close-tolerance set-up and operation of all necessary equipment such as; tool grinders, surface grinders, drill presses, pedestal grinders, power saws, arbor pressses, mills, lathes, rotary table, optical comparator and any other necessary machine shop equipment.</li><li>Will be reponsible for obtaining maximum work output from all machinery &amp; equipment used. </li><li>Will perform receiving, issuing, checking, recording, storing &amp; performing related functions necessary for control of inventory</li><li>Will perform typical layout operations with other work described herin, such as : Layout detail of tools or dies as related to machine or other tool fabrication; layout parts such as raw castings, forging and sheet metal parts to use as a guide in making tool or die.</li><li>Will perform all fabrication, to exacting tolerances, tools &amp; dies such as: Class "A" jigs and fixtures, drill jigs, check fixtrues, dies for sheet metal parts, progressive or compound dies, form and draw dies.</li><li>Proves dies and tooling and performs rework on the same level of difficulty as other work described herein.</li><li>Will perform all necessary sequences of operations and complete layout involving rotary tables, compound angles, exacting tolerances, etc.</li><li>Will maintain and verify records of all tooling location within the area.</li><li>Will maintain work area and equipment in a clean, orderly, FOD-free fashion and adhere to all Safety standards</li><li>This job description is not all inclusive of all duties. Other job duties may be assigned consistent with the Machining Fabricator Job Family within the new Job Family Structure may be assigned.</li></ul> Specialist level will require the following: <ul><li>Responsible for assisting the department in the development of techniques to increase productivity, quality, and throughput of products and to share job knowledge in the department. </li></ul>Education and Experience: <ul><li>HS Diploma or its equivalent; previous experience may be substituted for education requirement.</li><li>Previous sheet metal fabrication and/or manufacturing work experience preferred.</li><li>*Employees must bid into these classifications before progression is allowed to higher levels.</li><li>**Progression/Bid into Specialist positions requires 3 year minimum in the preceding classification, in the same family, prior to progression/bid</li></ul>Knowledge, Skill and Abilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. <ul><li>Must be familiar with basic hand tools such as screwdrivers, pliers, hammers, mallets, etc.</li><li>Must be able to use standard manufacturing measuring instruments such as calipers, micrometers, scales, etc.</li><li>Strong written and verbal communication skills.</li><li>Ability to follow written and verbal instructions; including production control and other production/engineering documentation. </li><li>Ability to interpret blueprints, work orders and production planing documents.</li><li>Ability to use standard manufacturing measuring instruments such as calipers, pin calipers, micrometers, tape measures, scales, height gauges, depth gauges, etc.</li><li>Must be capable of working with tight tolerances such as + or - .001".</li><li>Excellent communication skills both written and verbal. </li><li>Ability to perform quality work in a safe and efficient manner.</li></ul>Supervisory Responsibilities: <ul><li>N/A</li></ul>Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. <ul><li>Frequent lifting of up to 35 lbs.</li><li>Frequent pushing and pulling.</li><li>Bend, stoop, squat occasionally.</li><li>Sit, stand and walk frequently.</li><li>Talk and listen frequently.</li><li>Occasional use of computer.(Journeyman Machinist &amp; Tool Makers)</li><li>Frequent use of computer. (CNC's)</li><li>Constant use and motion of hands and arms.</li><li>Constant exposure to manufacturing shop noise</li></ul>Special Requirements: List any additional special requirements. Limitations and Disclaimer: The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel so classified. Furthermore, this job description does not establish a contract for employment. In compliance with the Americans with Disability Act (ADA) of 1990, the Company will make reasonable accommodations with those individuals with a disability as defined by the ADA.

Machining Fabricator 2 - Progression 1

Job Type Full-time Description Join Our Innovative Team as a CNC Lathe Machinist, lvl 1! Drive Precision, Efficiency, and Excellence in Manufacturing Discflo Pumps, a leader in advanced pumping technology, is seeking a skilled and motivated CNC Lathe Machinist to join our innovative team. If you're passionate about precision machining and want to contribute to the production of high-quality, industry-leading products, we want to hear from you! Why Work at Discflo Pumps? Innovation-Driven Environment: Work with cutting-edge machinery and processes. Career Growth: Continuous learning opportunities and career advancement. Collaborative Team: Join a team that values craftsmanship, innovation, and teamwork. Competitive Compensation and Benefits: We offer a comprehensive package that rewards your skills and dedication. Position: CNC Lathe Machinist Mission: The CNC Machinist's mission is to produce high-quality, precision-machined parts on time while ensuring efficient machine operation and minimizing downtime, contributing to the success of Discflo Pumps' production goals. Expected Results: <ol><li>Deliver precise, high-quality machined parts that meet stringent specifications and quality standards.</li><li>Consistently meet production deadlines to ensure smooth and timely delivery of products.</li><li>Maintain and optimize machine efficiency through proactive maintenance and troubleshooting.</li></ol> Primary Responsibilities: <ol><li>Operate and program CNC machines to produce parts with high precision.</li><li>Ensure all parts meet quality standards.</li><li>Maintain production schedules by completing tasks on time.</li><li>Perform routine maintenance and troubleshooting on machines.</li><li>Minimize downtime and optimize machine performance.</li><li>Adhere to all safety protocols and maintain a safe work environment.</li></ol> Ready to Accept the Challenge? If you're ready to take your skills to the next level and be part of an innovative team that values precision, quality, and efficiency, we encourage you to apply now. Apply today and help Discflo Pumps continue to lead the way in advanced pump manufacturing! Requirements Key Skills: <ul><li>Proficiency in CNC machine operation (Lathe, Mill, or both) </li><li>Strong understanding of blueprints and technical drawings</li><li>Expertise in using precision measurement tools (calipers, micrometers, etc.)</li><li>Excellent troubleshooting and problem-solving abilities</li><li>Knowledge of tooling and machining processes</li><li>Time management and ability to meet deadlines</li></ul> Important Attributes: <ul><li>Attention to detail and precision in all work</li><li>Strong work ethic and reliability</li><li>Problem-solving mindset with adaptability to changes</li><li>Mechanical aptitude and safety awareness</li><li>Focus and patience in handling complex tasks</li><li>Commitment to continuous learning and improvement</li></ul>Salary Description $24-$28 DOE

CNC Lathe Machinist Level 1

OUR COMPANY Applied Medical is dedicated to providing innovative products that improve patient outcomes and enable the advancement of minimally invasive surgery. As a new generation medical device company, Applied Medical is equally committed to improving the affordability and accessibility of high-quality healthcare. In order to fulfill this commitment, we invest heavily in vertical integration, R&amp;D, advanced manufacturing technologies, and most importantly-the growth of our team members. Applied Medical is proud to have a SIGNIFICANT AND SUSTAINABLE IMPACT on healthcare by delivering technologies that ENHANCE CLINICAL CARE and satisfy the pressing economic NEEDS OF OUR CUSTOMERS. OUR TEAM As a member of our Pilot Metals Development team, you will use creative problem solving to manufacture our metal product parts, such as progressive stamping, computer numeric control (CNC) machining, electrical discharge machining (EDM), vacuum molds or metal injection molding (MIM). Your expertise will play a pivotal role in shaping critical components and contributing to the next generation of medical technology. These roles include the following: Career Opportunities <ul><li>Machinist Trainee</li><li>EDM Wire/Sinker Machinist </li><li>Grinding Machinist</li><li>CNC Lathe Machinist</li><li>CNC Milling Machinist</li><li>CNC Programmer </li><li>Tool &amp; Die Maker</li><li>Mold Maker</li><li>Project Leader</li></ul>OUR UNIQUE BUSINESS MODEL Vertical Integration One of the main facets of Applied Medical's business model is our strong commitment to vertical integration. Instead of outsourcing our operations, Applied Medical team members design, develop, manufacture, and clinically implement all our products. Our high level of vertical integration allows us to quickly implement innovative ideas and maintain the control and flexibility necessary to ensure the highest product quality, availability, and compliance. Moreover, vertical integration yields operational efficiencies that enable us to provide our customers with clinically advanced technologies and cost savings. As a result of Applied Medical's COMMITMENT TO INNOVATION, the company has an expansive portfolio of CLINICALLY ADVANCED PRODUCTS and a pipeline filled with the next generation of breakthrough technologies for MINIMALLY INVASIVE SURGERY. Company Culture: Join a company that values making a meaningful and positive difference and highlights diversity, inclusion, and a positive work environment. Benefits The base compensation range for these roles can range from $18 - $40/hr for the position in California. Actual compensation packages are based on several factors that are unique to each candidate, including but not limited to skill set, depth of experience, certifications, and specific work location. The range displayed reflects the minimum and maximum target for new hire salaries in California based on the date of this job posting. Your recruiter can share more about the specific salary range compensation package during your hiring process. Please understand that the compensation range may be modified in the future. Each amount of pay is considered to be wages or compensation once such amount is earned and determinable. The amount and availability of any bonus, commission, benefit or any other form of compensation may be modified at the Company's sole discretion, consistent with the law. Equal Opportunity Employer Applied Medical is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, disability (mental and physical), exercising the right to family care and medical leave, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (including pregnancy, childbirth, breastfeeding and related medical conditions), or sexual orientation, or any other status protected by federal, state or local laws in the locations where Applied Medical operates.

Machining Opportunities in R&D

Position Summary ABOUT PARKER HANNIFIN: At Parker Aerospace, we develop technologies and innovative solutions that enable reliable, efficient, and increasingly sustainable flight throughout the aircraft's lifecycle, including aftermarket support. Our passionate people with deep engineering expertise and our breadth of differentiated technologies ensure that we make the extraordinary happen and continue to shape the future of aviation in partnership with our customers. As a member of our team, you are instrumental in fulfilling our mission: 'Enabling Engineering Breakthroughs that Lead to a Better Tomorrow.' Pursuing a career at Parker presents unlimited professional and personal development opportunities. Working with some of the industry's most brilliant minds, your contributions will be pivotal in developing innovative technologies and products, significantly contributing to Parker's goal of addressing the world's most pressing engineering challenges. At Parker, our team members belong, matter, and make a difference. We believe the key to bringing talented new team members into our organization is to focus on everyone's talents and potential rather than the job specification. If you have innovative ideas and a commitment to excellence, we are happy to consider you for other roles at Parker that may be a good fit. Parker Meggitt is a worldwide leader in multiple Commercial and Military Aerospace product lines, including Fire and Smoke Detection and Extinguishing systems, Bleed Air Overheat detection systems, Actuators, Rudder Pedal Assemblies, Pumps, Fuel Gauging Systems, High-Temperature cables, and more. The Parker Meggitt Simi Valley Fire, Safety, and Power Division site is a fully integrated location with product responsibility from Marketing and Engineering through Supplier Management, Program Management, and Manufacturing, ending with delivery to customers. Parker Meggitt - Simi Valley, CA, is also a key supplier in selecting energy markets, including nuclear gas analyzers and nuclear containment vessel penetration cables. We work directly with the largest global aerospace companies, including Airbus, Boeing, Embraer, Lockheed Martin, and many others. JOB DESIGNATION: The Prototype CNC Programmer Sr, under limited supervision performs and provides specialized machining capabilities to engineering and manufacturing engineering. Provides technical assistance and leadership to tool shop associates. Adheres to and supports safety policy and procedures. Ideal Candidate Profile: The ideal candidate will be a highly skilled CNC Programmer, Sr with extensive experience in CNC programming, machining processes, and quality standards. They should possess a strong technical aptitude, attention to detail, and a proactive approach to problem solving. Excellent communication skills and a commitment to safety and quality are essential for success in this role. JOB CORE RESPONSIBILITIES: <ul><li>Interface with engineers for prototype parts to support in-house R and D development and Qual programs. Support tooling for test rigs/fixtures to support testing.</li><li>Interface with Manufacturing Engineers and tool designers to fabricate and support production requirements.</li><li>Provides constructive feedback to customers to improve and simplify designs.</li><li>Prioritize and coordinate jobs within tool shop</li><li>Direct tool shop machinists for set-up and execution for CNC operations.</li><li>Ensure quality of finish and tolerances in machined components.</li><li>Program CNC Lathes and Mills using Mastercam Software</li><li>Set-up and execute complex CNC equipment in accordance with company policy and safety procedures</li><li>Installs, maintains and operates a variety of machining tools including lathes, milling machines, drill presses, etc. </li><li>Diagnoses problems, disassembles, determines extent of repair necessary and/or feasibility of repairs, refits or replaces worn or defective parts and reassembles</li><li>Makes ordinary replacements of new parts and/or complete new assemblies and selects materials, plans and performs machining operations on new or replacement parts</li><li>Works to specifications, from both oral and written instructions, sketches, blueprints, engineering drawings and manuals with little supervision</li><li>Regular, consistent and punctual attendance is required. May need to work overtime and weekends, variable schedule(s) and additional hours as necessary</li></ul>JOB SPECIFICATIONS: Education: A Secondary Certificate/High School Diploma and work experience that will allow successful performance of job expectations. Preferred: Post-secondary degree in related field Certifications: Vocational training, apprenticeships or the equivalent experience in related field Years Experience: 7+ years of relevant experience Skills: <ul><li>Experience in semi-repetitive specialized machine operations</li><li>Strong experience in Lathe and 3-1/2 axis Milling machining tools</li><li>Computer skills in Mastercam and Microsoft programs such as Word and Excel required </li><li>Solid understanding of geometric dimensioning and tolerances required </li><li>Ability to use hand tools and machinery </li><li>Able to follow instructions, sketches, blueprints, engineering drawings and manuals</li><li>Capable of problem-solving: Exercises judgment, based on previous experience, practices and precedents, to identify and solve problems that arise with little or no precedent</li><li>Effective oral and written communication</li></ul>CONDITI0N OF EMPLOYMENT: This position is subject to meeting U.S. export compliance and/or U.S. Government contracting citizenship eligibility requirements. Please note that the salary range information is only applicable for California. Compensation is based on a variety of factors, candidate experience, qualifications, and location as well as market and business considerations. Pay Range: \$33/hr - \$44/hr Come join the Parker Aerospace Team! We are proud to offer competitive benefits designed with health, wealth, and well-being in mind. Our competitive package includes: Health and Wellbeing: <ul><li>Comprehensive medical, dental, and vision coverage from day one, including Health Savings and Reimbursement Accounts. </li><li>Wellness incentive credits leading to reduced healthcare premiums. </li><li>Access to Employee Assistance Program (EAP) for health and well-being support. </li><li>On-site facilities: cafeteria with a wide array of food options, mini-mart, and vending machines. </li><li>Participation in health and emotional well-being challenges with rewards.</li></ul>Financial Security and Growth: <ul><li>Competitive salary with an annual bonus incentive plan. </li><li>Retirement benefits: 401(k) with company match opportunity. </li><li>Income Protection, Life Insurance, Accidental Life and dismemberment Insurance, Short and Long-Term Disability insurance.</li></ul>Work-Life Balance and Flexibility: <ul><li>Generous Paid Time Off: 120 hours, plus up to 13 paid holidays, including a company-wide shutdown between Christmas and New Year's. </li><li>Parental Leave: 4 weeks at 100% pay for new family additions. </li><li>Extras like Adoption Assistance, financial guidance resources, paid jury duty, bereavement time, and time off for citizenship testing, marriage, and birth.</li></ul>Career Advancement and Education: <ul><li>Support for ongoing education through our Educational Reimbursement program.</li><li>Parker Purpose Opportunities: </li><li>Business Resource Groups promote diversity, equity, and inclusion. </li><li>Volunteering day off and social committee activities throughout the year.</li></ul>Additional Benefits: <ul><li>Employee Perkz on various services (car purchases, computer purchases, life adventures, etc.) </li><li>Employee Referral program - Refer a family member or friend and receive a generous award for referrals that are hired (up to \$4,000) </li><li>Dress for Your Day policy, offering flexible work attire options.</li></ul>EMPLOYMENT OPPORTUNITY (EN-USA): Parker is an Equal Opportunity and Affirmative Action Employer. Parker is committed to ensuring equal employment opportunities for all applicants and employees. Employment decisions are based upon job-related reasons regardless of race, ethnicity, color, religion, sex, sexual orientation, age, national origin, disability, gender identity, genetic information, veteran status, or any other status protected by law. However, U.S. Citizenship, Permanent Residency, or other appropriate status is required for certain positions in accordance with U.S. import &amp; and export regulations. ("Minority / Female / Disability / Veteran / VEVRAA Federal Contractor") If you would like more information about Equal Employment Opportunity as an applicant under the law, please go to Know Your Rights: Workplace Discrimination is Illegal (eeoc.gov) and Genetic Information Discrimination DRUG-FREE WORKPLACE: Parker provides a drug-free workplace in accordance with its policies and applicable state laws. Therefore, all applicants seeking employment with Parker will be subject to drug testing as a condition of employment.

CNC Programmer, Sr

5 Axis CNC/Laser Operator **$19.00 to $25.00 hourly DOE ** ***Aerospace Experience is preferred*** ***No third-party recruiting firm calls or solicitations*** Luxfer Superform operates from Riverside, California (USA). We specialize in Superforming of Aluminum, Titanium, and Magnesium alloys as a 1st Tier supplier to major OEMs. Established in 1974 Superform serves Customers in all the major markets including Aerospace. We are looking for a motivated individual interested in developing a life-long trade. THIS ROLE PREDOMINATELY INVOLVES THE OPERATION OF 5-AXIS CNC ROUTER &amp; LASER MACHINES Responsibilities:<ul><li>Operate CNC machines (5 Axis machines) Rye with Fagor control, Haas VF9 with trunnion, and Prima Laser.</li></ul><ul><li>Monitor and ensure parts meet manufacturing requirements.</li><li>Read and interpret blueprints.</li><li>Perform inspection of parts using measurement tools (calipers, height gauge, etc.)</li><li>Deburr parts as needed.</li></ul>Requirements:<ul><li>Two (2) or more years' experience preferred. </li><li>Experience operating the following machines: Rye with Fagor control, Haas VF9 with trunnion, and Prima Laser.</li><li>Knowledge of inspection tools. (Calipers, micrometers, pin gauges.)</li><li>Understanding of GD&amp;T.</li><li>Must be familiar with safety requirements in the manufacturing area.</li><li>Must have the ability to be flexible, a self-starter, and be able to work under pressure to meet deadlines.</li><li>Machine or technical training or setup experience a plus.</li><li>High school graduate or equivalent.</li><li>Ability to adhere to the company attendance policy by arriving to work on time, working as scheduled, and clocking in and out for breaks on time.</li></ul>Benefits:<ul><li>Medical, Dental, Vision, EAP and Life Insurance</li><li>401k with Company match of up to 6%</li><li>Company Paid Holidays (10 Days)</li><li>Paid Vacation (Up to 2 weeks your first year)</li><li>Paid Sick Leave (40 hours annually)</li></ul>Additional Information:<ul><li>$19.00 to $25.00 hourly DOE (depending on experience)</li><li> Monday through Thursday 5:30 AM to 4:00 PM with overtime as business requires.</li><li>(4/10 schedule)</li></ul>***No third-party recruiting firm calls or solicitations*** We are committed to a safe, drug-free work environment and pre-employment drug screening, physical and background checks are required prior to starting. Luxfer Superform is an Equal Employment Opportunity (EEO) employer and does not discriminate on the basis of race, color, national origin, religion, gender, age, veteran status, political affiliation, sexual orientation, marital status or disability (in compliance with the Americans with Disabilities Act) with respect to employment opportunities. Women, minorities, and veterans are encouraged to apply. This position requires access to our export-controlled commodities, technical data, technology, and services. These items are restricted under the International Traffic in Arms Regulations (ITAR) to U.S. Citizens, Lawful Permanent Residents of the U.S., and properly licensed foreign persons. Therefore, employment is contingent on compliance with ITAR regulations and successfully obtaining and maintaining the necessary export authorization license from the U.S. Department of Commerce's Bureau of Industry and Security, U.S. Department of State's Office of Defense Trade Controls, or other applicable government agency. We participate in E-Verify. Candidates must be authorized to work in the US.

54 Full Time Jobs in California