field_remote_option

field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

field_job_salary_range

TOMI ENGINEERING, Inc is an Aerospace Manufacturing Company in Santa Ana (92707) has an immediate opening for an experienced CNC Manufacturing Engineer.<h2>Job Duties:</h2><ul><li dir="ltr">Develop manufacturing processes by studying product requirements.</li><li dir="ltr">Evaluate manufacturing processes and recommend changes to improve efficiency/quality</li><li dir="ltr">Research, design, and implement manufacturing methods and equipment that meet production cost targets and maintain quality.</li><li dir="ltr">Recommend and select new equipment and tools, providing manufacturing decision-making information by calculating production, labor, and material cost estimates for ROI analysis.</li><li dir="ltr">Improve production processes by editing machining order, optimizing fixtures, and correcting CNC programming at the machine..</li><li dir="ltr">Direct and oversee cost reduction and process improvement projects.</li><li dir="ltr">Evaluate, set up, and train the team on new equipment</li></ul><h2>Qualifications Guidelines:</h2><ul><li dir="ltr">A minimum of 5 years previous experience.</li><li dir="ltr">Analytical and problem-solving skills.</li><li dir="ltr">Excellent oral and written communication skills in English.</li></ul><h2>Physical Requirements:</h2><ul><li dir="ltr">Ability to sit, stand, or walk for extended periods of time.</li><li dir="ltr">Capability to stretch, bend, and reach work areas.</li><li dir="ltr">Occasional ability to reach, bend, stoop, lift, and move parts, tooling, or inspection equipment weighing 50 lbs or less.</li><li dir="ltr">Reasonable accommodation will be provided upon request to perform essential job functions.</li></ul><h2>Work Environment:</h2><ul><li dir="ltr">The majority of work is performed in an office environment, subject to moderate changes in temperature.</li></ul><h2>ITAR Requirement:</h2><ul><li dir="ltr">This position requires the use of information or access to hardware subject to the international Traffic in Arms Regulations (ITAR). Therefore, all applicants must be U.S. persons within the meaning of ITAR, which includes U.S. Citizens and U.S. Permanent Residents (Green Card Holders).</li></ul><h2>Benefits</h2><ul><li dir="ltr">Health insurance paid at 75%, including dependents.</li><li dir="ltr">Dental insurance.</li><li dir="ltr">Vision insurance.</li><li dir="ltr">Paid time off.</li></ul>&nbsp;

TOMI Engineering, Inc.

Manufacturing Engineer

Now Hiring: Manufacturing Project ManagerLocation: Indianapolis, INDepartment: Manufacturing&nbsp;Employment Type: Full-TimePay Range: $75K - $100KLead Complex Projects from Concept to CompletionAerodyn Engineering is seeking a dynamic and results-driven Manufacturing Project Manager to lead high-precision, complex manufacturing projects from planning through delivery. This role requires a strong blend of technical insight, project leadership, and customer engagement. You will be the key driver in ensuring projects meet or exceed quality, budget, and schedule targets while serving as the liaison between engineering, manufacturing teams, and customers.<h3>Key Responsibilities</h3><ul><li>Lead project planning and execution for the manufacturing of complex R&amp;D hardware</li><li>Interpret project requirements and define solutions to open-ended technical challenges</li><li>Oversee the development and management of engineering drawings, BOMs, and contract reviews</li><li>Coordinate all manufacturing, assembly, and testing workflows, including tooling and resource planning</li><li>Generate accurate quotes and requisition essential parts and equipment</li><li>Track project progress, maintain detailed schedules and cost reporting through systems like Epicor</li><li>Serve as the primary customer contact for updates, issues, scope changes, and performance reviews</li><li>Identify project risks and implement proactive mitigation strategies</li><li>Manage internal and external resources including engineers, technicians, and third-party vendors</li><li>Continuously evaluate and improve manufacturing processes to reduce lead time and improve efficiency</li><li>Maintain a clear record of project lessons learned for continuous improvement</li></ul><h3>Required Qualifications</h3><ul><li>High school diploma required; Bachelor’s degree required (engineering or related field preferred)</li><li>5+ years of experience in manufacturing or engineering project management</li><li>Strong mechanical aptitude with a history of solving technical challenges</li><li>Proficient in Microsoft Office (Excel, Word, Outlook, PowerPoint, Project)</li><li>Familiarity with Epicor ERP or similar systems preferred</li><li>Strong written and verbal communication skills</li><li>Customer-focused, highly organized, and able to lead cross-functional teams</li><li>Capable of managing multiple priorities under pressure with a professional demeanor</li><li>Willingness to work overtime as needed and support a fast-paced R&amp;D-driven environment</li></ul>Why Join Aerodyn? At Aerodyn, you’ll be part of a team delivering world-class engineering and manufacturing solutions for aerospace and high-performance industries. Our collaborative environment fosters innovation, technical growth, and continuous improvement. Join us in shaping the future of precision manufacturing.Apply now to lead challenging projects with real-world impact and drive results in a cutting-edge manufacturing environment.

Aerodyn

Manufacturing Project Manager

<h2>🔧 Shop Floor Supervisor – CNC Machining &amp; Fabrication</h2>📍 Indianapolis, IN | 🕒 1st Shift | 💼 Full-Time 💵 $100,000 – $115,000 per yearAbout Aerodyn Engineering: Aerodyn Engineering is a leader in advanced engineering and precision manufacturing solutions, specializing in CNC machining, welding, and fabrication for the aerospace and high-precision industries. Join a team that values innovation, continuous improvement, and collaboration.<h3>✈️ Position Overview:</h3>We’re looking for a skilled and experienced Shop Floor Supervisor to lead CNC machining, welding, and fabrication operations. This role is your opportunity to oversee production, ensure quality, and drive operational excellence on the shop floor.<h3>🛠️ Key Responsibilities:</h3>✅ Supervise daily shop floor operations across CNC machining, welding, and fabrication ✅ Manage labor, equipment, and machine scheduling to meet production targets ✅ Troubleshoot issues with tooling, fixturing, and active jobs ✅ Collaborate with planning, programming, and maintenance teams ✅ Support CNC programming efforts and coordinate part movement ✅ Mentor and train machinists, welders, and fabrication team members ✅ Uphold quality control standards and resolve non-conformances ✅ Communicate with leadership and support customer RFQs<h3>📌 Qualifications:</h3>🎓 High school diploma required; technical education preferred 🛠️ 5+ years of manufacturing experience (aerospace a plus) 👥 2+ years of leadership/supervisory experience 🔧 Strong knowledge of CNC machinery, tooling, and welding equipment 📐 Ability to read and interpret engineering blueprints; CAD experience preferred 💬 Excellent communication and problem-solving skills ⚙️ Mechanical aptitude with a focus on continuous improvement 💪 Physical requirements: standing, walking, climbing, occasional lifting (up to 75 lbs)<h3>🚀 Why Join Aerodyn Engineering?</h3>✔️ Competitive pay: $100,000 – $115,000 per year ✔️ Leadership role in a growth-focused aerospace company ✔️ Collaborative, team-oriented environment ✔️ Commitment to continuous improvement and professional growth🔗 Ready to take the lead? Join a team where precision, teamwork, and innovation thrive.👉 Apply today and drive precision manufacturing forward!

Shop Floor Supervisor

Wilson Machine &amp; Welding Inc.&nbsp;3 Locations - Hillsboro, Decatur and Cordova, ALWhy Wilson Machine &amp; Welding?✅ Strong Pay + Overtime (Alabama has no tax on OT!)&nbsp;✅ No Bureaucracy – Work Independently&nbsp;✅ Top-Tier Benefits – Blue Cross Blue Shield insurance (family coverage as low as $20–$30/week, drops 50% after five years!)&nbsp;✅ Relocation Assistance Available – We’ve given $15K+ to the right people!&nbsp;✅ Comfortable Shop Environment&nbsp;✅ New Fabrication Shop Coming SoonWe Want Skilled Machinists!If you can program, set up, and operate CNC machines and want to earn top wages, Wilson Machine &amp; Welding is the place for you. We are actively hiring skilled CNC machinists who can work independently, program in GibbsCAM or at the machine, and thrive in a no-nonsense, high-paying environment.Immediate 2nd Shift Openings!Hours: Monday – Thursday or Tuesday - Friday 3:30 PM – 1:30 AM (OT available + half-day Saturday!)&nbsp;Needs: 5 - 10 Machinists to join a lean but strong team of 7Machines:● Horizontal Boring Mills (HBMs) – Big demand here!● CNC Vertical Mills (3–4 axis)● Lathes (Y-axis &amp; 5-axis – high demand on nights!)● VTLs💡 Most of Our Machinists Program – You’ll get a job traveler and blueprint, then program in GibbsCAM or at the machine (Fanuc/Haas controls).Top applicants could qualify for 1st Shift AvailabilityWhat We Make:🛠️ Job Shop Environment focusing on Precision and Large part machining for high-demand industries.Ready to Earn What You're Worth?We’re growing fast and need top-tier CNC talent to build the future of Wilson Machine &amp; Welding. If you're a skilled machinist who can program, set up, and operate, we want to talk to you!📩 Apply today or call us to learn more!

Wilson Machine & Welding Inc

CNC Machinist / Programmer

Now Hiring: CNC Machinist – Lathe Setup &amp; Programmer (Weekend Shift) Location: Des Moines, IA Job Type: Full-Time Pay: $30 – $50 per hourInnovative Manufacturing &amp; Engineering Inc. (IME) is seeking a motivated and experienced CNC Lathe Machinist to join our growing team. This is a rare opportunity to work Friday through Sunday, 12-hour shifts, and get paid for a full 40-hour week, giving you up to four days off each week.At IME, we foster a team-focused, growth-minded environment where you are encouraged to pursue your full potential. We’re AS9100 certified, quality-driven, and committed to helping our employees build long-term, rewarding careers—not just jobs.<h3>What We're Looking For</h3>Qualified candidates will demonstrate a history of: • Self-motivation and accountability • Attention to detail and active learning • Strong teamwork and communication skills • Excellent attendance and reliability<h3>Responsibilities</h3>• Set up and program CNC lathes with live tooling and bar feeders • Read technical drawings and blueprints to prepare accurate setups • Use CAM software to model cutting paths and generate machine code • Optimize machine settings to improve efficiency without compromising quality • Perform QA checks to ensure products meet design specifications • Maintain and troubleshoot machines to ensure continuous operation • Clean, calibrate, and sharpen tooling as needed • Train and support new team members on machining best practices • Contribute to continuous improvement and 5S initiatives • Maintain production pace to meet scheduling demands<h3>Preferred Experience</h3>• 5+ years of CNC lathe or mill operation, setups, and programming • Leadership experience in a manufacturing environment preferred • Experience with AS9100 and lean manufacturing principles • Background in 5S implementation and machine shop best practices<h3>Schedule</h3>• Weekend Shift: Friday – Sunday (12-hour shifts, flexible hours) • Paid for 40 hours per week • Overtime available upon request<h3>Benefits</h3>• 401(k) with matching • Health, dental, and vision insurance • Life insurance • Health savings account (HSA) • Paid time off • Flexible schedule • Profit sharing • Career development and growth opportunitiesLocation Requirement: • Must be able to reliably commute to or relocate to Des Moines, IA 50313 prior to startingIf you're looking for a role where your experience and initiative are valued, and where your schedule gives you flexibility and time to enjoy life outside of work, this is your opportunity.Apply today and join a team that puts people, precision, and progress first.

Innovative Manufacturing and Engineering

CNC Setup Machinist (Weekend Shift)

Aries Electronics, Inc., an electronic connector manufacturer located in Bristol, PA., has an opening for a reliable, productive CNC Machinist / Programmer. In order for you to be considered for this position, you must have Vertical CNC machining experience in:<ul><li>Creating and editing CNC programs using CAM CNC software.</li><li>Manufacturing plastic and metal components.</li><li>Creating tooling and fixtures.</li></ul>These components are used in connectors, test sockets and cable assemblies. This is a full-time position, but part time or semi-retired machinists/programmers may also be considered.&nbsp; This is a first shift (7am-3:30pm) M-F position, with possible overtime when/if required by management. To be considered for an interview, you must have the following major requirements and experience levels listed below, but not limited to:<ul><li>At least 2 years of experience creating /editing CNC programs using CAM CNC software. </li><li>Experience with FeatureCAM CNC software is a major plus. Experience with other CNC programming software will be considered. </li><li>Be able to manually edit/write programs at the CNC machine when required. </li><li>At least 2 years experience safely setting up and operating Vertical CNC Machining/Milling Centers (Haas DT &amp; MiniMills and Bridgeport), and perform any necessary/required CNC preventative maintenance when needed. </li><li>Experience machining Engineering grade plastics, aluminum, copper and some stainless steel. </li><li>Experience machining/drilling tight tolerances and very small details/features. </li><li>Be capable of controlling raw material and tooling inventory and coordinate with Purchasing to replenish inventory as needed. </li><li>Measuring parts using calipers, micrometers, depth gages, gage blocks and pins, Visual Inspection equipment, etc. </li><li>Be able to read and interpret blue prints/detail drawings.</li></ul>Resumes need to be submitted in PDF format with references and include income requirements. All replies must be made by e-mail, no phone calls please. Only local applicants will be considered. Can start immediately. Pay will be based on experience and the ability to meet the requirements listed above. Medical / Dental / Disability Insurance / Life Insurance / FMLA / Paid Holidays / Vacation Aries Electronics, Inc. is a small, family owned, fast paced, custom electronic connector/adapter/cable manufacturer in business for 50 years. Standard electronic connectors, cables, test and burn-in sockets, electronic adapters and custom sockets are sold, designed and built in our headquarters located in Bristol, PA. <a href="http://www.arieselec.com" target="_blank">www.arieselec.com</a>

Aries Electronics, Inc.

CNC MACHINIST / PROGRAMMER

Company Description:&nbsp; D.P. Tool &amp; Machine, Inc. is a technologically advanced family-owned manufacturing company experienced with producing close tolerance CNC precision turned, machined, fabricated/welded components, electro-mechanical assemblies and fixtures servicing major corporations.&nbsp;Job Summary:&nbsp;This position is accountable for operating production machines to produce parts in accordance with established standards and guidelines.Reports To:&nbsp; Manufacturing SupervisorRequirements:&nbsp;High School Diploma or GEDGD&amp;T knowledge and blue- print readingVersed in Mazatrol languageAbility to sit, stand, twist, bend and walk for long periods and lifting up to 35 lbs.Job Responsibilities:Use solid models to develop CNC programsInspection of 1st piece complex partsDevelop robust manufacturing processesCreate work holding and select cutting toolsCalculate and program controls to regulate machining factors such as speed and feedFollow ISO standards and practice Lean 6S manufacturing principlesUse of proper PPE at all timesPreferred Skills:Mechanical aptitudeShop math and trigonometryIntegrex experienceMazatrol experience

D. P. Tool & Machine, Inc.

Integrex Set-up Programmer

Company Description:&nbsp; D.P. Tool &amp; Machine, Inc. is a technologically advanced family-owned manufacturing company experienced with producing close tolerance CNC precision turned, machined, fabricated/welded components, electro-mechanical assemblies and fixtures servicing major corporations.&nbsp;Job Summary:&nbsp; The Quality Inspector is responsible for inspecting parts and aiding the department with various responsibilities.Reports To:&nbsp; Quality ManagerRequirements:&nbsp;AA/AS/AAS, quality certification, apprenticeship or previous work experience that applies to Manufacturing preferred.&nbsp;High School diploma with technical certificate or two years’ experience in manufacturing or machining&nbsp;in a Quality role.Knowledge of GD&amp; T, blueprint reading, statistics, sampling, gauging methods and process control.Proficient in Microsoft Office.Manual and programmable CMM operating ability (Zeiss Calypso &amp; Pc-Dmis).Ability to sit, stand or walk for long periods and lift up to 35lbs.Job Responsibilities:Inspect first article parts, in-process and receiving inspection.&nbsp; Complete final inspection.Run approved CMM part programs and operate manual CMM(s) and other inspection instruments.Audit current processes and implement continuous improvement goals.Ensure all gauges and tools are in working order and are currently calibrated.Review job packets for required paperwork and documentation.Assist production in sorting, de-burring, reworking and cleaning parts as needed.Data entry in respect to QA items.Material handling with skid jacks, crane and tow motor.Preferred Skills:CMM set -up and programming using Zeiss Calypso and Pc-Dmis.Experience with Metrology equipment including Vici, Keyence, Fowler Height Stand, Plate inspection and Profilometers.Knowledge in gauge calibrationISO auditing a plus.Goal oriented person with planning and execution skills and a willingness to learn.

Quality Inspector

Great opportunity at a leading manufacturer for the space, defense, aerospace and automotive markets✔️ Paying $27 - $42 per hour 💲 💰 &nbsp;✔️ Relocation assistance is offered!✔️ There is plenty of growth opportunity at this shop 🚀 📈Apply now to explore further!---Advanced Structural Technologies (AST) is an industry leading manufacturer of forged, flow formed and machined products for the Space, defense, aerospace and automotive markets. As a fully integrated contract manufacturing business, all process steps are completed on site in AST’s 100,000 sq. ft. facility.AST is looking for a Production Planning person to assist the manufacturing departments. This person should be a self-starter who is able to take control and assume responsibility for achieving tasks successfully and on time.&nbsp;RESPONSIBILITIES INCLUDE:<ul><li>Create and release production and related work orders for the shop.</li><li>Ensure work order packages are distributed to proper departments.</li><li>Ensure closed work order packages and related information is collected and filed.&nbsp;</li><li>Examine documents to verify completeness and accuracy of data.</li><li>Confer with document originators and engineering liaison personnel to resolve discrepancies and compile required changes to documents.&nbsp;</li><li>Posts changes to computerized or manual control records and manufacturing documents and notify affected departments.</li><li>Prepare reports as necessary.</li><li>Keep track of set-up times, cycle times, and length of time to complete jobs – both forge and spin.</li><li>Create and keep log of problem parts; how it was noticed, how it was corrected, and how to not have issues the next time.</li><li>Update Monthly Plan with current status of job.</li></ul>PRODUCTION PLANNING REQUIREMENTS INCLUDE:<ul><li>A minimum of 3 years of relevant work-related experience, preferably in a manufacturing environment.</li><li>Ability to communicate effectively in writing and verbally as appropriate for the needs of the audience.</li><li>Knowledge of Microsoft Office products.</li><li>College Degree or Formal Education (APICS, other relevant training) a big plus.</li></ul>

Advanced Structural Technologies

Production Planner

ARCH Medical Solutions - Lehigh Valley (Whitehall, PA location) is looking for experienced CNC Machinists to join their team.ARCH Medical Solutions - Whitehall, PA machines high quality medical instrumentation and devices, robotic end effectors and aerospace/defense components.&nbsp;As a CNC Machinist you will produce very complex machined parts by setting up and operating a CNC Mill or Lathe Machines.&nbsp;We currently operate state-of-the-art:<ul><li>Multi-axis Mazak Mills</li><li>Multi-axis Mazak Turning Centers</li></ul>What you’ll do<ul><li>Read blueprint or job order for product specifications such as dimensions and tolerances, and tooling instructions such as fixtures, feed rates, cutting speeds, and depth of cut.</li><li>Select, positions, and secure work piece (chuck, collet, or vise). Change tools, adjust offsets and tool comps to maintain required part quality.</li><li>Inspect products during the machining operation to determine if parts meet print specifications.&nbsp;</li><li>Observe operation of machine and verify conformance of machined workpiece to specifications.</li><li>Maintain equipment by completing basic preventive maintenance requirements.&nbsp; Reporting need for machine repairs.</li><li>Understand and comply with company policy safety guidelines, quality systems requirements and housekeeping standards.</li></ul>What you need to thrive in this role<ul><li>High School Diploma or GED equivalent.&nbsp;</li><li>Prior experience operating CNC Mills or Lathes (experience preferred in setting up and programming/editing programs)</li><li>Ability to read and understand blueprints including GD&amp;T tolerancing with profile tolerancing preferred.</li><li>Dependability - Follows instructions, responds to management direction.</li><li>Safety and Security - Observes safety and security procedures; reports potentially unsafe conditions; uses equipment and materials properly.</li><li>Strong attention to detail, ability to multi-task, ability to anticipate, think ahead and plan.</li><li>Ability to work in a team, strong interpersonal skills, effective communication skills.</li></ul>About us and what we offer youARCH team members play an important part in making a positive impact on lives worldwide—and they do it in a positive work environment. Our people have the opportunity to advance through our organization, receive training, and learn from experienced mentors.Benefits and Perks include:<ul><li>Competitive benefits package including Medical, Dental &amp; Vision effective day one!&nbsp;</li><li>Paid time off and holidays</li><li>Competitive matching 401(k)&nbsp;</li><li>Temperature controlled work environment</li><li>Quarterly bonus program</li><li>Positions available on 6:00am-2:00pm and optional Saturday morning overtime is available</li></ul>ARCH Global Precision is an Equal Opportunity Employee and wholeheartedly supports diversity in the workplace as a basic premise for business success.&nbsp; All employees of ARCH Global Precision are employed on an at-will basis.This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments.A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbent(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities.

111 Jobs