field_remote_option

field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

field_job_salary_range

Responsibilities PURPOSE OF POSITION: Fabricate, position and form structural metal/fiberglass products. MAJOR RESPONSIBILITIES: • Use and conduct proper care of PPE. • Sets up and operates fabricating machines, such as brakes, rolls, shears, saws, and presses, to cut, bend, straighten, and form metal/fiberglass plates, sheets and structural shapes according to blueprints and specifications. • Reads and interprets blueprints, engineering specifications, and shop orders to determine machine setup, production methods, and sequence of operation. • Selects, positions, and secures dies, blades, cutters, and fixtures onto machine, using rule, square, shims, templates, hand tools, and built-in gauges. • Starts machine and observes machine operation to reposition work piece, change dies, or adjust machine settings for multiple or successive passes. • Inspects or measures work, using rule, gauges, and templates. • Lifts work piece manually or with hoist, and positions and secures it on machine table in drilling jig or holding fixture. • Moves machine controls to feed tools into work piece, and engages automatic feed or manually holds. • Observes machine operation, and verifies conformance of work piece to specifications, using fixed gauges, calipers, and micrometers. • Changes worn cutting tools, using wrenches. • Moves controls to adjust cutting speeds, feed rates, and depth of cut. • Support the Altec Production System (APS). • Follow established safety, environmental and quality policies, procedures and practices. • Maintain work area and shop tools/equipment. • Maintain daily time records. • Other job duties as assigned. • Job duties may vary by location. EDUCATION, EXPERIENCE, AND SKILLS REQUIRED: • High School Diploma/GED required. • Vocational training in lieu of experience would be considered • Ability to read, write, and comprehend required. • Basic computer usage knowledge required. • Ability to use measuring equipment and read blue prints and schematics required. • General knowledge of at least one of the following desired o Mechanical o Manufacturing / Production processes OTHER POSITION SPECIFICATIONS: • Ability to obtain forklift certification if required. • Keep a clean work area (5S). • Assist co-workers as needed. • May participate in RCI events. • May be required to learn Altec programs and/or systems. • Shift work may be required. Responsibility for Safety: • Safety In everything we do Responsibility to Prevent Errors: • Ensures appropriate reviews have been performed as needed for high quality Mental Alertness: • Continuous attention to all job functions ensuring quality products Communication with Others: • Requires outside and inside contacts to carry out company policy and programs; Improper handling will have considerable effect on operational results; Must often deal with matters requiring explanation, persuasion and obtaining of approvals 2 years of manufacturing experience preferred This job level is able to be adjusted at time of hire, if the candidate meets the qualifications for jobs of a more experienced level in the career path. Benefits Altec offers a competitive salary that rewards performance and dedication, along with a comprehensive benefits package that includes: <ul> <li>Medical, Dental, Vision and Prescription Drug Program</li> <li>Retirement 401(k) Traditional or Roth Program Options with Company Match</li> <li>Vacation and Holidays</li> <li>Parental Leave</li> <li>Short Term and Long Term Disability Leave</li> <li>Flexible Spending Accounts</li> <li>Tuition Assistance Program</li> <li>Employee Assistance and Mental Health/Substance Abuse Program</li> <li>Life Insurance, Accidental Death and Dismemberment Insurance</li> <li>Supplemental Insurance including Hospital Indemnity, Critical Illness and Accident Insurance</li> <li>Additional Wellness Programs and Rewards Available</li></ul> Why Join Altec? If you're considering a career with Altec, there's never been a better time to join us! Our company was founded on values that place the customer first and prioritize our people as our greatest strength. Over the years, those values and our talented associates have helped us to earn the trust and confidence of customers worldwide. Today, Altec is an innovative, financially sound company that sets the standard of excellence in design, manufacturing and service - and that's why we're the ideal place for you to grow your career. Founded in 1929, Altec is a privately held company headquartered in Birmingham, Alabama. Altec specializes in the manufacture, sale and service of aerial devices, digger derricks, cranes and specialty equipment for the electric utility, telecommunications, tree care, construction, and light and signs markets. We help our customers dig deeper and reach higher in more than 100 countries around the world. Please join us for open interviews every Friday from 11 a.m. to 3 p.m. at the Burnsville Body Plant (150 Altec Drive, Burnsville NC, 28714). EEO Statement Altec Industries, Inc. and its affiliates are equal opportunity employers and maintain affirmative action plans to recruit, retain, develop, and promote qualified individuals without unlawful consideration of race, gender, color, religion, sexual orientation, gender identity, national origin, age, disability, citizenship status, veteran status, or any other characteristic protected by federal, state or local law. Altec strives to maintain a work environment free from unlawful discrimination and harassment, where associates are treated with respect and dignity.

CNC Laser & Press Brake Operator

Job Summary: The Sr. CNC Tool Maker is a vital role within our manufacturing operations, combining the precision and craftsmanship of tool making with the technical expertise of CNC programming and process development. Reporting to the Plant Manager, this role involves designing, fabricating, assembling, and repairing a diverse range of tools, dies, gages, and fixtures, with a particular focus on CNC machining processes. The Sr. CNC Tool Maker will lead efforts in creating new CNC programs, optimizing machining processes, and driving continuous improvement initiatives across a fast-paced manufacturing environment. This role is crucial in supporting both production and experimental engineering initiatives, ensuring the highest standards of quality, efficiency, and safety. Key Responsibilities: Tool and Die Fabrication: <ul><li>Design, fabricate, and repair tools, fixtures, molds, gages, and dies across a variety of projects, including production, development, and specialized engineering tasks.</li><li>Interpret engineering blueprints, sketches, and directives accurately to ensure precise tool creation.</li><li>Perform in-process inspections to ensure work conforms to blueprint specifications.</li></ul>CNC Programming and Machining: <ul><li>Develop and implement new machining processes to produce or improve parts on CNC equipment.</li><li>Write, set up, and troubleshoot new CNC programs, ensuring efficient operation across multiple machine platforms, including Horizontal Mills, Vertical Mills, and Sub-Spindle Lathes.</li><li>Review part prints to identify tooling and fixture needs, developing new fixtures or altering existing ones as necessary.</li></ul>Leadership and Continuous Improvement: <ul><li>Lead and mentor machinists and supervisors, providing training on CNC programming, setup, and operation.</li><li>Identify and implement continuous improvement opportunities in machining processes, driving these changes from concept to realization.</li><li>Work with Design Engineering to resolve manufacturing issues and enhance the manufacturability of product designs.</li><li>Assist in implementing and managing an effective machine data collection system.</li></ul>Safety and Compliance: <ul><li>Ensure strict adherence to company safety, health, and environmental standards, as outlined in the Collective Bargaining Agreement.</li><li>Maintain general housekeeping standards within the immediate area of responsibility.</li></ul>Miscellaneous: <ul><li>Be flexible to work across various shifts (1st, 2nd, and 3rd) as required.</li><li>Perform related tasks as necessary to complete work assignments within the Tool Maker classification.</li><li>May check and top off lubricants as necessary.</li><li>May perform other duties as required.</li></ul>Requirements Qualifications: <ul><li>High School Diploma or GED.</li><li>Possession of a Tool and Die Certificate with at least two years of experience in CNC mills, lathes, and related machining equipment operation, programming, and setup; OR five years' experience in similar capacities without a certificate.</li><li>Extensive experience in machine programming, setup, and operation of both manual and CNC equipment.</li><li>Proficiency in reading and interpreting engineering drawings, 2D and 3D models, and CAD files, with experience in MasterCAM or equivalent for CNC programming and setup.</li><li>Skilled in the use of precision measurement tools (e.g., micrometers, calipers).</li></ul> We Value: <ul><li>Extensive experience (eight years or more) in assembling and inspecting complex parts within a production setting.</li><li>Experience in fabricating prototype parts, fixtures, and gages to extremely close tolerances using all available manufacturing techniques and technologies.</li><li>A continuous improvement mindset and the ability to present and implement positive change.</li><li>Exceptional teamwork skills and proven leadership experience in a fast-paced manufacturing environment.</li><li>Competence in Microsoft Office software and/or equivalent applications.</li></ul> Physical/Mental Essential Functions: <ul><li>Ability to stand for prolonged periods.</li><li>Ability to lift/carry up to 70 pounds.</li><li>Ability to control operation with hand or foot, and perform repetitive motions.</li></ul> Working Conditions: <ul><li>Work is primarily conducted on the shop floor in a very fast-paced environment.</li><li>Other duties, responsibilities, and activities may change or be assigned at any time, with or without notice, as assigned by the Manager</li></ul>

Senior CNC Toolmaker

Company Description Precision Aerospace Corp, a division of Tribus Aerospace, is US owned and operated. We service high tech leaders in commercial and defense aerospace. We utilize leading edge technology and processes to make and deliver complex, short run close tolerance machined parts and value-added assemblies. Our customers value our track record of quality and delivery success and they are fueling our growth with new and interesting part opportunities. We desire to build a work culture that reflects our PAC Values. This needs to be a culture Accountability, Adaptability and Achievement. For us to thrive and grow, we need to measure ourselves and constantly seek ways to improve. We also need to stay focused on the needs of the customer. This means we all are accountable to the customer and we strive to make them completely satisfied in our quality and delivery. This also means that we want to hire and develop top quality talent who are smart, motivated and focused. Some people may not be comfortable in this dynamic and demanding culture and environment. Our long term associates have found that they like the status of working in the aerospace industry. They enjoy working with a higher level of technology and executing a higher level of workmanship. Multiple shifts available: Weekday Shift (Monday-Fri- 6a-2:30p) Training will be on day shift for a minimum of 90 days (M-Fri- 6a-2:30p) Job Description The purpose of this position is to support the department's ability to achieve its goals and objectives. This includes performing scheduled and unscheduled maintenance on CNC controlled machining equipment and supporting facility maintenance needs. Other duties may be assigned as needed. Essential Duties: The following is a list of the general duties performed in this position. It is not meant to be an exhaustive list. 1. Perform preventive maintenance tasks on CNC mills, lathes and other equipment as assigned. 2. Perform unscheduled maintenance on CNC mills, lathes and other equipment to minimize machine down time, including assisting in diagnosis of equipment issues. 3. Perform facility maintenance. 4. Assist in maintaining an accurate inventory of maintenance supplies and equipment 5. Perform data collection and communication tasks in Unipoint and other applications. 6. Safely operate a forklift to move equipment and material within the facility. 7. Perform all tasks and maintain work stations to 5S organization and housekeeping standards. 8. Comply with PAC policy and procedures. Qualifications 1. High school diploma or equivalent. Prefer skilled trades courses or curriculum. 2. 2 to 5 years minimum successful prior essential duty related experience, preferably in a CNC machining environment, including work such as mechanical, hydraulic, pneumatic and electrical diagnosis and repair. 3. Specific knowledge of CNC machine tool repair, including 4th/5th axis and electronics with brands common to PAC (Fanuc &amp; Haas controllers). 4. Basic facility maintenance knowledge. Ability to read schematics. 5. Ability to read/write English . 6. Ability to perform basic math functions such as addition, subtraction, multiplication and division. 7. Michigan Driver License and Insurable Driving Record. Additional Information Work Authorization/Security Clearance <ul><li>The company requires access to information, or technology that is subject to the International Traffic in Arms Regulations (ITAR) and other US government security regulations. These laws do not permit access rights to non-US citizens, or to other unauthorized individuals.</li><li>Must be a United States Citizen, or US Permanent Resident.</li></ul> AAP/EEO Statement <ul><li>Precision Aerospace Corp provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law.</li></ul> Other Duties <ul><li>Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.</li></ul>Videos To Watch <a href="https://www.youtube.com/watch?v=xEb0vcdILhI" target="_blank">https://www.youtube.com/watch?v=xEb0vcdILhI</a>

Maintenance Technician (CNC Machines)- Weekday Shift

Position Title: Manual/CNC Machinist - Model Shop Department: Model Shop Location: Fenton, MO Reports To: Manufacturing Engineering Manager Classification: Hourly - Non-Exempt Hours: Monday - Thursday 5:00am - 3:00pm Position Summary: The primary function of this Machinist position is to work with the Manufacturing Engineering Group to make components for a wide range of unique equipment used in our manufacturing and assembly process. Essential Job Duties: <ul><li>Set-up and operate manual mills and lathes</li><li>Operate CNC mills and lathes as needed</li><li>Ability to make offsets, change and reset tools</li><li>Inspect and ensure that all dimensions are within print specification</li><li>Complete required documentation with accurate information</li><li>Perform daily preventative machine maintenance </li><li>Maintain a clean, safe, and orderly work area</li></ul> Required Education: <ul><li>High School Diploma or Equivalent</li><li>Formal Machinist training with certificate and/or previous experience</li></ul> Required Experience/Skills: <ul><li>1-3 years previous experience with manual and CNC mills and lathes</li><li>Excellent blue print reading skills</li><li>Understanding of cutting tools, speeds and feeds, and machining techniques</li><li>Ability to use precision measuring devices</li><li>Understanding of G and M code</li><li>Aptitude to learn pertinent software</li><li>Ability to work individually and as part of a team </li></ul>About Control Devices, LLC Control Devices, LLC ("Control Devices" or "CD") is a leading designer &amp; manufacturer of high-quality flow control valves, condensate removal traps, related components &amp; accessories serving the compressed air, pressure washer, vehicle systems, fire protection, specialty gas, &amp; the industrial, agricultural &amp; food service float valve markets. CD prides itself in the ability to design, innovate &amp; manufacture flow control valves for custom applications &amp; offers a line of standard products that has grown over the years. CD is based in Saint Louis, MO &amp; its products are sold on a global basis to O.E.M.'s, Distributors &amp; End Users. CD offers competitive compensation, a comprehensive benefits package, paid time-off, steeled-toed shoes reimbursement, casual dress work environment, and a solid 401(k) retirement plan to promote financial security. Control Devices, LLC is an Equal Opportunity Employer. We provide equal employment opportunities to all employees and applicants and prohibit discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. All offers of employment with Control Devices are contingent upon successful completion of a Background Check and Drug Screen.

Manual/CNC Machinist - Model Shop - 1st Shift

CNC OPERATOR (Program &amp; SETUP - RUN 4)- 2ND SHIFT ABOUT OUR COMPANY SUHNER USA, Inc. is a Swiss-owned corporation founded in the US in 1976. We are part of the SUHNER group of companies, a 100-year-old family-owned company based in Switzerland. SUHNER's strengths and expertise extends across three key areas: (1.) Tools/abrasives (2) Machining and (3) Material expertise for metal. SUHNER is the worldwide leader in the realm of manufacturing designed to help our customers unlock maximum value, improve product performance, optimize manufacturing processes, and stay one step ahead of the competition. In doing so, SUHNER focus' on the flawless manufacturing of flexible shafts for the Automotive, Industrial, Medical, and Lawn and Garden Industries. Today, we are operating a 60,000 sq. ft. manufacturing plant in Rome, GA. To learn more about SUHNER, please visit our website @ <a href="http://www.suhner.com" target="_blank">www.suhner.com</a> WHAT WE HAVE TO OFFER <ul><li>Compensation package (based upon experience)<ul><li>$21.00 - $24.00</li></ul></li><li>Full time/Hourly/Paid Weekly</li><li>Health, dental, life, vision insurance</li><li>Company paid life insurance</li><li>HSA (Health Savings Account)</li><li>401k plan with up to 7% Employer contribution (after one year of full-time employment)</li><li>Vacation/Benefit Time (personal days, sick time)</li><li>Nine (9) Paid Holidays</li><li>Employee referral program</li></ul> WHAT ARE WE LOOKING FOR? SUHNER USA, Inc. is seeking to fill the full-time CNC Operator on 2nd shift, located at our facility in Rome, GA. BASIC FUNCTION The function of the 2nd shift CNC Operator is to ensure all available machines can continue to run throughout 2nd shift and into third shift. PRIMARY DUTIES Novice <ul><li>Follow production orders as assigned by the supervisor.</li><li>Perform other functions related to the machine shop.</li><li>Maintain a safe and neat work environment and clean at the end of the shift.</li><li>Maintain an acceptable quality output per production order.</li><li>Able to understand basic drawings and measuring tools to confirm compliance.</li><li>Weigh count the completed parts production ran to verify quantity.</li><li>Deliver the finished machined parts to the Quality Control Shelf for final inspection</li></ul> Setup and Run Two <ul><li>Setup and run per work instructions to achieve the required specification, quality and quantity expectations as directed by the Supervisor.</li><li>Acquire all necessary tooling such as collets, drill chucks, end mills, drill bits, reamers, etc., and setup machine per instructions.</li><li>Prepare material for the appropriate machine in accordance with engineering specifications, procedures and work instructions including documentation of lot numbers for materials.</li><li>Ability to understand complicated drawings and measuring tools to confirm compliance.</li></ul>Program &amp; Setup and Run Four <ul><li>Setup and run per work instructions to achieve the required specifications, quality and quantity expectations as dictated by the department supervisor.</li><li>Pull up program for machine and refer to set-up instructions to be the first part run.</li><li>Prepare material for the appropriate machine in accordance with engineering specifications, procedures and work instructions including documentation of lot numbers for materials.</li><li>Acquire all necessary tooling such as collets, drill chucks, end mills, drill bits, and reamers, etc., and setup machine per instructions.</li><li>Measure all dimensions per drawing specifications.</li></ul>Setup and Run All Machines: <ul><li>Setup and run per work instructions to achieve the required specifications, quality and quantity expectations as directed by the department supervisor.</li><li>Prepare material for the appropriate machine in accordance with engineering specifications, procedures and work instructions including documentation of lot number for materials.</li><li>Acquire all necessary tooling such as collets, drill chucks, end mills, drill bits and reamers, etc., and setup machine per instructions</li></ul>Expert: <ul><li>Program and setup and run any machine per work instructions to achieve the required specifications, quality and quantity expectations as directed by the department supervisor.</li><li>Prepare material for the appropriate machine in accordance with engineering specifications, procedures and work instructions including documentation of lot number for materials.</li><li>Pull up program for machine and refer to setup instruction to begin the first part run.</li><li>Acquire all necessary tooling such as collets, drill chucks, end mills, drill bits and reamers, etc., and setup machine per instructions.</li><li>Measure all dimensions per drawing specifications.</li></ul>KNOWLEDGE/EXPERIENCE <ul><li>High school diploma or GED preferred and/or Machine Tool Technology Certificate.</li><li>Ability to read and understand drawings, work instructions and other documents related to the job</li><li>Write legibly</li><li>Perform basic math operations (add, subtract, multiply, and divide) with and without use of calculator</li><li>Ability top measure product using micrometers, calipers, scales, thread pitch gauges, thread micrometers, blade micrometers, depth micrometers, height gauge, core micrometers, etc.</li><li>Ability to operate digital scales for weighing of product.</li><li>Able to operate relatively complex production CNC machinery in addition to, the ability to operate manual lathes, milling machines and surface grinders, performing multiple interrelated operations and adjustments per drawing.</li><li>Willingness to be flexible and adjust to a changing work environment.</li><li>Demonstrated ability to work independently, organize and accurately prioritize work. Understand when urgency is required and use good judgment in varied situations.</li></ul>PHYSICAL DEMAND OF JOB <ul><li>Stand for at least two (2) hours without resting</li><li>Lift at least 50 lbs. unassisted; greater than 50 lbs. assisted</li><li>Ability to push and/or pull carts and pallet jacks</li><li>Ability to ben and stoop to the floor</li></ul>

CNC OPERATOR 2ND SHIFT

Job Type Full-time Description About Generant: Initially founded in the early 1930's, Generant designs and manufactures valves and pressure regulators for a wide variety of industries with a strong position in the Industrial Gases and Cryogenics, Medical Gases and Equipment, Energy, and Chemicals markets. Generant is 100% employee-owned and is headquartered in Butler, NJ. For more information, please visit our site: generant.com THIS IS FOR A 2ND SHIFT SCHEDULE - Monday - Friday: 03:00PM - 11:30PM Job Summary: The primary function of the 2nd Shift Lead CNC Machine Operator is to operate and load bars into the CNC machines in a productive, high quality, and safe manner, troubleshoot and assist Machine Operators on shift. They are also responsible for maintaining safe, clean machines and work environment. The Lead CNC Machine Operator is a driven, experienced CNC Machine Operator with goals to grow into a shift supervisor. Essential Functions • Functional understanding on how to read engineering drawings • Understand and confirm proper paperwork, tools, gages, and bar stock material are present for the job • Inspect parts using the visual comparator, caliper, eye loop, appropriate gages, and instruments ensuring machine is producing accurate, quality parts • Perform visual inspection of parts for burrs, chatters, chamfer irregularities, tits, hexes, surface finish, etc. always confirming with engineering print and first part inspection sample • Assign machines to operators based on their skill level and capabilities to optimize spindle uptime. • Assist operators with offset adjustments • Troubleshoot machines and bar feeders to maintain production efficiency • Support the team with inspections when necessary to ensure a high level of quality • Assist with operator training • Work with minimal supervision • Ensure smooth transition of job requirements from CNC Setup personnel to CNC Operators and from shift to shift • Monitor and enforce Operator performance by working alongside Operators • Be known and available for Operator questions in order to ensure machines are kept running and producing quality parts • Verify Operator production reporting is accurate • Identify and report machine repair and maintenance issues and prioritize those within the CNC department for the maintenance department • Monitor and enforce Company quality, job requirement and safety policies and procedures ensuring a productive, safe working environment • Ensure Operators are equipped with eye loops and calipers to do their job • Maintain clean and safe working environment including segregation and proper disposal of scrap material • Suggest process improvements and equipment purchases • Interact with other areas in the company to accomplish timely workflow • Comply with and promote Company Quality and Safety Policies and Strategic Business Objectives • Perform other assignments as required Requirements Qualifications: Experience/Education/Skills • High School Diploma or equivalent • A minimum of 3 years of experience working with CNC machines and metal part production is required • Able to read and interpret engineering drawings • Must have a complete knowledge of metrology equipment and their uses including micrometers, calipers, indicators, depth micrometers, gauge pins, thread gauges and optical comparators • Basic computer skills including Microsoft Office applications Language Skills: • Fluent in English and have the ability to communicate to convey information clearly to a multi-lingual production staff Mathematical Skills: • Advanced Math Skills (statistics, basic accounting) Reasoning Ability: • Ability to carry out detailed, involved written and verbal instructions Physical Demands: Must frequently lift up to 25 pounds and occasionally lift up to 50 pounds When performing the duties of this job, the employee is regularly required to walk, use hands to finger or handle or feel objects and tools or controls and talk or hear Employee is frequently required to reach with hands and arms Employee is required to monitor workflow of all personnel in the CNC Area Specific vision abilities require close vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Must be able to handle several tasks at the same time under time constraints Work Environment: CNC Operator Supervisor will work throughout the Company and will be exposed to high pressure gas, heated and moving mechanical parts and is occasionally exposed to vibration Noise level is moderate for a manufacturing plant Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Generant strives to hire folks that have a pleasant, professional demeanor, are eager to learn, and have a passion for manufacturing Benefits: Medical, Dental, Vision, Employee Stock Ownership Plan (ESOP), 401k, Life and AD&amp;D Insurance Please note that this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

CNC Operator - Lead

Join our team! What We Offer At Palm Beach State College, you will discover a place where ideas come to life and the heartbeat of a county begins. By joining us, you will be exposed to professionals from across the U.S. and abroad who are the strivers, reinventors, explorers, and influencers dedicated to developing talent that fills the most needed workforce roles. As the Panthers, we embrace a community of belonging, caring, and connection for our students and employees. We seek creative individuals to help PBSC fulfill its mission of inspiring hope, advancing skills, and transforming lives. About this role Instruct college students in accordance with educational theories and techniques. Develops discipline related curricula, assess student learning, participates in program evaluation, and college activities. Maintains college and department standards in support of the College's mission and strategic plan. Work schedule varies according to teaching assignment. Varies Instruct diagnosed high functioning with minimal support autistic college students in accordance with educational theories and techniques. Develops discipline related curricula, assess student learning, participates in program evaluation, and college activities. Maintains college and department standards in support of the College's mission and strategic plan. PLEASE NOTE: This is an open continuous applicant pool. Submitting an application does not guarantee an interview or employment. Positions will be filled by the department on an as needed basis. Applications without attached copies of official transcripts or non-web based unofficial transcripts will not be considered. Transcripts for Adjunct positions must either be an official copy or a college-stamped student copy or a non-web based unofficial transcript, scanned into an electronic format and attached to their application. Transcripts produced through web-based student systems will not be accepted. Minimum Requirements Associate degree or higher in CNC/machining technology or related discipline and related industry experience OR NIMS: Level 1 Lathe and Mill certified, Mastercam Associate level certification and minimum two years of verifiable experience working in CNC machining as an operator or set-up programmer capacity OR Two or more years of related industry experience and teaching/training experience. Preferred Experience training with diagnosed high functioning with minimal support autistic college students. READY TO APPLY? Here's your application preparation! Please review the following information to apply for a position at Palm Beach State College: <ul><li>Carefully review the minimum qualifications advertised for the available position, as only applicants meeting the minimum requirements will be considered.</li><li>Background Check/ Drug Screen may be required based on the specific requirements of the position for which the application is being submitted. Employment is contingent upon passing a drug test and completing a criminal background investigation.</li><li>An essential goal of the Office of Human Resources is to respond to all applicants once a selection is made. Please take notice of the position closing date advertised. Whenever positions are filled, the Office of Human Resources responds to all applicants who have submitted applications.</li><li>The College conducts its employment activity within the State of Florida except for occasional brief and temporary pre-approved periods related to college travel.</li></ul>Application Deadline This position is open until filled

Adjunct Instructor, CNC Production Specialist - (H)

CNC Machine Operator Job Summary We are seeking a skilled CNC Machine Operator to join our team. The ideal candidate will be responsible for operating and maintaining CNC machines, ensuring precision and quality in the production of parts and components. The CNC Machine Operator will work closely with the production team to meet production goals while adhering to safety standards and quality protocols. Key Responsibilities <ul><li>Operate CNC machines according to technical drawings and specifications.</li><li>Read and interpret blueprints and job orders to understand the specifications of the product.</li><li>Monitor machine operations to maintain product quality and efficiency.</li><li>Conduct regular inspections for accuracy, completeness, and adherence to quality standards.</li><li>Maintain a clean and organized work area and adhere to all safety and regulatory guidelines.</li><li>Document production data, production output, and quality control results.</li><li>Collaborate to improve processes and enhance productivity.</li></ul> Qualifications <ul><li>Proven experience as a CNC Machine Operator or in a similar role within a manufacturing environment.</li><li>Proficient in reading and interpreting blueprints, schematics, and technical documents.</li><li>Strong attention to detail and ability to work independently with minimal supervision.</li><li>Excellent problem-solving skills and a strong commitment to quality.</li><li>Effective communication skills and ability to work collaboratively in a team environment.</li><li>Basic math skills and knowledge of measurement tools (calipers, micrometers, etc.).</li></ul> Physical Requirements <ul><li>Ability to stand for extended periods and lift up to 50lb pounds.</li><li>Manual dexterity and eye-hand coordination for operating machines and measuring tools.</li><li>Read and write the English language with proficiency.</li><li>Capability to work in a manufacturing environment, which may involve exposure to noise, machinery, and varying temperatures.</li></ul> Benefits <ul><li>Competitive salary</li><li>Eligibility for Medical, Dental and Vision </li><li>Simple IRA account with 100% company match up to 3% of your wage </li><li>Paid time off and holidays</li><li>Opportunities for career advancement and professional development</li></ul> JOB CODE: CNC Operator

CNC Machine Operator

With this position at Prolec-GE Waukesha you will enjoy a highly competitive pay as well as: <ul><li>A leading edge benefit package that includes major medical, dental and vision options</li><li>401-K retirement plan participation w/company match</li><li>Company paid Accident &amp; Sickness plan, Company paid Life &amp; ADD insurance options</li><li>Quarterly local bonus plan participation</li><li>Educational reimbursement opportunities as well as other benefit offerings</li><li>Ask about the limited time $1500.00 sign-on bonus opportunity!!!</li></ul> JOB SUMMARY To setup, operate, load and unload CNC machines to produce parts that will achieve optimum quality and efficiency levels while meeting the requirements of the engineering design. This is a third shift position PRINCIPLE DUTIES AND RESPONSIBILITIES <ul><li>Interprets and understand simple and complex part drawings.</li><li>Uses precision measuring tools such as micrometers, Vernier's, scales, protractors, compass, height gage, dial indicators, etc. </li><li>Uses machine control codes, computers, and part nesting, DNC links, and file transfers to produce parts.</li><li>Utilizes machine control capabilities to make simple part programs, prove out programs and edit programs as a normal part of the setup and operation of CNC machines and related equipment.</li><li>Performs normal operator maintenance as prescribed by equipment builder to include the replacement of consumable materials and parts. </li><li>Performs multiple activities simultaneously, organizes work, and takes corrective action in response to error messages and/or process interruptions. </li><li>Assists with supervision in the training of other machine operators and helpers. </li><li>Diagnoses machine problems and repair of the machines. </li><li>Assumes leadership role and takes responsibility for overall performance of equipment.</li><li>Meets production standards by monitoring machine performance to include managing up time and quality standards. Use of punch dies and pressures used in the hydraulic forming of steel and alloys. </li><li>Very proficient at performing oxy/fuel flame and plasma cutting, part layout, inspection, hole drilling, tapping and milling to include an understanding of speed and feed rates. </li></ul><ul><li>Reads, understands, and follows guidelines set forth by E.I.s, M.P.s, S.P.s, O.I.C.s, and blueprints when performing assigned work.</li><li>Comply with all safety policies and procedures and actively participate in defined zero harm safety culture driven initiatives.</li></ul> KNOWLEDGE, SKILLS &amp; ABILITIES TOOLS AND MACHINERY CNC machines such as saws, press brake, manual mills, plasma cutter and CNC Flex machine. Tools include micrometers, Vernier's, scales, protractors, compass, height gage, dial indicator, tape measure, go-no-go gauges and squares. MATERIALS Personal protective equipment to include safety glasses, steel toed shoes, hearing protection, welding apron, face shield, and appropriate gloves. GENERAL Works under minimal supervision. Must be a self-starter with excellent problem solving and decision making skills. Acts decisively with a sense of urgency to maximize machine production and minimize down time. Strong knowledge of mathematics, to include geometry, to determine unknown part dimensions and/or relationships. Knowledge of metal types and characteristics. Understanding of the part use, fit and function as well as the manufacturing processes utilized is essential. Experience working with computers and machine controls. EDUCATION AND EXPERIENCE High school diploma or G.E.D. equivalent ADDITIONAL INFORMATION The above description covers the principle functions of the job. It is not intended to be a complete listing of all the miscellaneous, incidental, or substantially similar duties, which may be assigned during normal or emergency operations. Prolec-GE Waukesha, Inc. is an equal opportunity employer and makes employment decisions without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, genetic information, disability, protected veteran status, or any other reason prohibited by applicable law

CNC/Machine Operator

Job Type Full-time Description About Generant: Initially founded in the early 1930's, Generant designs and manufactures valves and pressure regulators for a wide variety of industries with a strong position in the Industrial Gases and Cryogenics, Medical Gases and Equipment, Energy, and Chemicals markets. Generant is 100% employee-owned and is headquartered in Butler, NJ. For more information, please visit our site: generant.com Job Summary: The primary function of the CNC Machine Maintenance Mechanic is to ensure the maintenance and repair of facility equipment including process machinery and building infrastructure. The job will require requisition of repair and maintenance parts, scheduling and implementing maintenance work and repairs. The Maintenance Mechanic must be knowledgeable in operation, maintenance, and repair of CNC and general production machinery. Essential Functions: <ul><li>CNC Machine Maintenance and repair</li><li>Performs routine maintenance on machinery to ensure proper performance</li><li>Schedules machine cleaning and preventative maintenance</li><li>Updates production schedule with maintenance performed</li><li>Coordinates with outside repair vendors</li><li>Maintains and inventories repair parts</li><li>Ensures proper oil levels in machines </li><li>Repairs and corrects machine leaks</li><li>Troubleshoot production machines and facility equipment problems </li><li>Promote and maintain a safe working environment </li><li>Suggest process improvements and equipment purchases</li><li>Must be able to perform the job with minimal supervision</li><li>Perform other assignments as required </li><li>Comply with and promote Company Quality and Safety Policies and Strategic Business Objectives</li></ul>Requirements Qualifications: Experience/Education/Skills <ul><li>High School Diploma or equivalent, minimum 7 years of experience maintaining and repairing production machines and facility equipment </li><li>Knowledge of maintenance and repair of CNC turning centers with Fanuc Controllers</li><li>Able to read and interpret engineering drawings</li><li>Must have a complete knowledge of metrology equipment and their uses including micrometers, calipers, indicators, depth micrometers, gauge pins, thread gauges and optical comparators</li><li>Understanding of mechanical systems and electrical circuits</li><li>Basic computer skills including Microsoft Office applications</li></ul> Language Skills: <ul><li>Fluent in English (reading, writing, speaking)</li></ul>Mathematical Skills: <ul><li>Intermediate Math Skills (measuring, use of calculator)</li></ul>Reasoning Ability: <ul><li>Ability to carry out detailed, involved written and verbal instructions</li></ul> Physical Demands: <ul><li>Must frequently lift up to 25 pounds and occasionally lift up to 50 pounds</li><li>When performing the duties of this job, the employee is regularly required to walk, use hands to finger or handle or feel objects and tools or controls and talk or hear</li><li>Employee is frequently required to reach with hands and arms</li><li>Specific vision abilities require close vision, color vision, peripheral vision, depth perception and the ability to adjust focus</li><li>Must be able to handle several tasks at the same time under time constraints</li></ul> Work Environment: <ul><li>Machine Maintenance Mechanic will work throughout the Company and will be exposed to high pressure gas, heated and moving mechanical parts and is occasionally exposed to vibration</li><li>Noise level is moderate for a manufacturing plant</li><li>Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions </li></ul>Benefits: Medical, Dental, Vision, Employee Stock Ownership Plan (ESOP), 401k, Life and AD&amp;D Insurance Please note that this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

790 Jobs in United States