field_remote_option

field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

field_job_salary_range

Manufacturing Engineer II CNC in GAC Savannah Unique Skills: About the Group: The supply Chain Engineering team works with our suppliers to provide recommendations on processes and answers technical questions. The team acts as a liaison engineering and our suppliers. About the Role: The Manufacturing Engineer II for this position should be an individual with extense experience on Machininig. Included but not limited to conventional machining, CNC Programing and CNC Equipment Operation for 3, 4 &amp; 5 axis. The ideal candidate should have experience working on the shop floor previously directly with Operations and experience with suppliers as a plus. Also tooling design, development and analysis related to tooling and CMM inspection are desirable, same as Project Management. Position can have peak times where can be traveling up to 40%. Typical is up to 25%, Education and Experience Requirements Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience. Position Purpose: Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment. Job Description Principle Duties and Responsibilities: Essential Functions: <ol><li> Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).</li><li> Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.</li><li> Author DRDI/DMT rework instructions to support effective corrective actions.</li><li> Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.</li><li> Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.</li><li> Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.</li><li> Investigate and assist in preparing justification for equipment and facility requests.</li><li> Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.</li><li> Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.</li><li> Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.</li><li> Incorporate Lean Manufacturing Methodology into existing and future processes.</li><li> With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.</li><li> Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.</li><li> Support all Safety, Sustainability and Ergonomic Initiatives. .</li><li> Aid in development and maintenance of Business Continuity Plan. .</li></ol> Additional Functions: <ol><li> Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. .</li><li> Initiate and maintain accurate daily/weekly activity status based on work output, as required. .</li></ol> Perform other duties as assigned. Other Requirements: <ol><li> Proven knowledge of Lean and/or Six Sigma principles. </li><li> Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. </li><li> Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. </li><li> Lean Six Sigma Greenbelt Certification or higher preferred. </li></ol> Additional Information Requisition Number: 222367 Category: Operations Engineering Percentage of Travel: Up to 25% Shift: First Employment Type: Full-time Posting End Date: 09/30/2024 Equal Opportunity Employer/Veterans/Disabled. Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Manufacturing Engineer II CNC

Job Type Full-time Description We are looking for a dedicated CNC Machinist with strong programming skills to operate and maintain CNC machines, create and modify CNC programs, and ensure high-quality output. The ideal candidate will have a deep understanding of machining processes, blueprints, and CAD/CAM software, and be able to troubleshoot and optimize machine performance. Key Responsibilities: <ul><li>Set up, operate, and monitor CNC machines including mills and lathes to produce precision parts according to specifications.</li><li>Write, edit, and optimize CNC programs using [specific software, e.g., G-code, M-code, CAD/CAM software]. Modify existing programs to improve efficiency and accuracy.</li><li>Read and interpret technical drawings, schematics, and blueprints to determine machining requirements.</li><li>Inspect parts using precision measuring tools (calipers, micrometers, gauges) to ensure they meet quality standards and specifications. </li><li>Perform routine maintenance and adjustments as necessary.</li><li>Diagnose and resolve issues related to machine performance, tooling, and programming. Implement corrective actions to minimize downtime.</li><li>Continuously seek ways to enhance machining processes, reduce waste, and increase productivity. Collaborate with engineering and production teams to refine techniques and methodologies.</li><li>Maintain accurate records of machine settings, production runs, and maintenance activities. Update and document changes in CNC programs and procedures.</li></ul>Requirements <ul><li>Minimum of 5 years of experience as a CNC Machinist with hands-on programming skills. Experience with HASS CNC machines is a plus.</li><li>High school diploma or equivalent; technical degree or certification in CNC machining or related field preferred.</li><li>Proficiency in CNC programming languages (G-code, M-code), CAD/CAM software (specific software, e.g., BobCAD, SolidWorks), and machining techniques. Strong mechanical aptitude and problem-solving skills.</li><li>Ability to maintain high precision and accuracy in a fast-paced environment. Strong focus on safety and quality.</li><li>Effective communication skills to collaborate with team members and supervisors. Ability to follow detailed instructions and provide feedback.</li><li>Ability to lift and maneuver heavy materials, stand for extended periods, and work in a manufacturing environment.</li></ul>Company Benefits: <ul><li>FunEx Discounts </li><li>Medical (Blue Cross/Blue Shield), Dental &amp; Vision </li><li>Short/Long Term Disability, </li><li>Life Insurance with buy-up option, </li><li>401K (after one year of employment), </li><li>Sick Pay, PTO, Paid Holidays, </li><li>Health Savings Account, </li><li>Uniforms provided after 90 days of employment </li></ul>Kooks Custom Headers and Exhaust is proud to be an Equal Employment Opportunity and Affirmative Action employer committed to an inclusive and diverse workplace. All qualified candidates will receive consideration for employment and will not be discriminated against based on race, color, religion, sex, sexual orientation, gender identity, transgender status, national origin, protected veteran status, disability, age, pregnancy, genetic information, or any other consideration prohibited by law. All qualified individuals are encouraged to apply, including individuals with disabilities and Protected Veterans. If you need assistance applying, please reach out to our HR Department.

CNC Machinist

Johnson Screens - A brand of Aqseptence Johnson Screens is the leading global provider of innovative screening and separation solutions. We support a wide range of industries, which means that almost every product around us has touched one of our screens during its manufacturing process. Since our inception over a century ago, our products have helped protect lives by reducing harmful waste, providing clean water, and making the best use of our precious natural resources. We strive to be a great place to work and do what is right for our customers and our people. We thrive on innovation and continuous improvement and we believe that our people are the key for our success. Overview As a CNC Machinist with a strong emphasis on programming, you will play a key role in our manufacturing process, contributing to the creation of precision components. Your primary responsibility will be programming and setting up CNC machines to produce parts according to engineering specifications. This position requires a high level of technical expertise in CNC programming, the ability to troubleshoot and optimize programs, and a strong understanding of machining processes. Responsibilities <ul><li>CNC Programing:<ol><li>Develop and optimize CNC programs using industry-standard software, such as Mastercam, SolidWorks, Mazak or similar.</li><li>Interpret engineering drawings and specifications to create efficient and accurate CNC programs.</li><li>Collaborate with engineers and designers to ensure program accuracy and feasibility.</li></ol></li><li>Machine Setup and Operation:<ol><li>Set up CNC machines, including tool selection, fixture preparation, and workpiece loading.</li><li>Verify program correctness through trial runs and adjust as necessary to ensure quality and efficiency.</li><li>Monitor machine performance and make adjustments as needed during production.</li></ol></li><li>Quality Assurance:<ol><li>Conduct in process inspections to ensure parts meet quality standards.</li><li>Collaborate with quality control teams to address and rectify any deviations from specifications.</li><li>Implement continuous improvement initiatives to enhance machining processes and quality.</li></ol></li><li>Troubleshooting:<ol><li>Identify and resolve programming and machining issues promptly.</li><li>Collaborate with maintenance and engineering teams to troubleshoot machine malfunctions.</li></ol></li><li>Documentation and Record Keeping:<ol><li>Maintain accurate records of CNC programs, tooling configurations, and machine set up details.</li><li>Document changes and updates to programs for future reference.</li></ol></li><li>Safety and Compliance:<ol><li>Adhere to safety guidelines and protocols to ensure a secure working environment.</li><li>Stay informed about industry trends, advancements, and compliance standards related to CNC machining.</li></ol></li></ul> Qualifications <ul><li>Proven experience as a CNC Machinist with a focus on programing.</li><li>Two year technical degree in CNC Machining or equivalent experience.</li><li>Proficiency in CNC programming languages and software.</li><li>Strong understanding of machining processes, materials, and tooling.</li><li>Ability to read and interpret engineering drawings and specifications.</li><li>Excellent problem solving and troubleshooting skills.</li><li>Detail oriented with a commitment to producing high quality work.</li><li>Strong communication and collaboration skills.</li><li>Familiarity with lean manufacturing principles is a plus.</li></ul> Benefits: <ul><li>Medical/Dental/Vision - Family Coverage Available</li><li>Safe Harbor 401(k) - 5% Employer Match</li><li>Group Term Life Insurance - Additional Coverage Available</li><li>10 Paid Holidays per Year</li><li>Sick Time &amp; Vacation Time</li><li>Short &amp; Long Term Disability Insurance</li><li>Critical Illness Insurance</li><li>Employee Assistance Program (EAP)</li><li>Optional Legal Plan</li></ul> Join our team today! Careers start here. Johnson Screens is an equal opportunity employer: Veterans, Disabled, Minorities and Women.

CNC Machinist I - NBR (2nd shift)

Date Posted: 2024-09-05 Country: United States of America Location: PW103: Columbus GA 8801 Macon Road, PO Box 9903, Columbus, GA, 31908 USA Position Role Type: Onsite Pratt &amp; Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. Innovation through diversity of thought. At Pratt &amp; Whitney, we believe diversity of thought enables creativity, innovation, and a foundation for inclusion. By fostering an inclusive culture, we accept a shared accountability and responsibility to recognize, sponsor, coach, hire and promote talent equally. We welcome our employees to be their whole - best - selves at work because trust, respect and integrity, are a part of our DNA. At Pratt &amp; Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? What You Will Do <ul><li>Set up and operate equipment, lend expertise to resolving process problems, perform the less complicated work on tools and dies, perform periodic preventive maintenance checks and less complicated repairs. Requires the know how to deburr parts, clean parts, read process sheets, use and read gauges, make minor machine moves, as well as being familiar with the characteristics of the product.</li><li>This position requires a mechanical and technical aptitude and an ability to follow work instructions. Comply with all environmental, health, and safety requirement.</li><li>You will set up and operate process equipment in an assigned area.</li><li>You will set up and operate basic machine tools to repair, make minor alterations and make the less complicated tooling.</li><li>You will need to read and understand blueprints and work from written and verbal instructions.</li><li>You will perform basic shop mathematics and use basic measurement instruments.</li><li>We service and repair equipment associated with the area where problems are identified.</li><li>You will assist in the development of other team members.</li><li>We perform administrative tasks such as complete MRP and status of work in process, conduct safety meetings, order tools and supplies, etc.</li><li>We perform unrelated duties as may be necessary to support the needs of the facility.</li><li>1st shift or 2nd shift (M-Thu) OR AWW1 or AWW2 (Fri-Sun) availability</li></ul>Qualifications You Must Have <ul><li>High School Diploma or equivalent</li><li>U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.</li></ul>Qualifications We Prefer <ul><li>CNC Machine operating experience</li><li>2yr technical certificate</li><li>Proficient in MS Office Suite</li></ul>What We Offer <ul><li>Medical, dental, vision and life insurance </li><li>Short-term disability, long-term disability and parental leave </li><li>401(k) match </li><li>Flexible spending accounts </li><li>Employee assistance program </li><li>Employee Scholar Program (No waiting period!) </li><li>Paid time off including: 3 weeks of vacation, 5 personal sick days, 3 unpaid days for unique situations at supervisor discretion, and 12 paid government holidays throughout the year inclusive of holiday shutdown for the week between Christmas and New Year.</li></ul>Additional Information: <ul><li>Must be a U.S. Citizen. This position may require access to systems/tools that are restricted to individuals who possess US citizenship.</li></ul>What is my role type? In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee's personal responsibility. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Machining Team Member 2nd Shift onsite

Get the benefits of being in a union!! <ul><li>Full benefits covered </li><li>Retirement for life </li><li>Time and half is paid for anything over 8 hours per day </li><li>Saturdays are time and a half pay </li><li>Sundays and holidays are double pay </li><li>Schooling of your trade is also covered and free </li></ul>Qualifications <ul><li> <ul><li>High school or equivalent (Preferred) </li><li>Manual Machining: 2+ years (Required) </li><li>CNC Operating: 2+ years (Preferred) </li><li>CNC programing : 2+ years (highly Preferred) </li></ul> </li></ul> GENERAL PURPOSE: Acquires experience for basic set-up and operation of machines in more than one assigned area, or to work on products of more complex machining. POSITION SUMMARY: <ul><li>Performs basic set-up and operation of automatic or semi-automatic machines used in the production of machined parts. </li><li>Preform safe operation of basic tools and complex equipment and the appropriate handling of materials. </li><li>Write and edit programs for CNC Lathe or CNC Mill.(G-Code / M-Code) (Fanuc &amp; Haas Controls) </li><li>Acquires the ability to check and inspect parts to meet tolerances and product operating requirements. </li><li>Keeps logs or other necessary documents. </li><li>Fits, aligns, and adjusts machines or assemblies to meet tolerances and product operating requirements. </li><li>Works from scheduled, shop orders, established procedures, blueprints, specifications written and/or verbal instructions from supervisor and identifies deviations that can potentially interrupt productivity. </li><li>Uses computer system to submit data for reports. </li><li>AutoCAD and Inventor cam software experience is a plus </li><li>Machine Preventive Maintenance </li></ul> ESSENTIAL SKILLS AND EXPERIENCE: <ul><li>Strong mechanical knowledge </li><li>Normally receives general instructions on routine work, detailed instructions on new assignments. </li><li>Assignments are semi-routine in nature where ability to recognize deviation from accepted practices required. </li><li>Understanding of Feeds and speeds of different materials and there machinability. </li></ul> TRAINING AND EXPERIENCE: Requires production experience, basic reading, writing and shop math skills. Skilled at operation of a variety of machines. Basic understanding of related mechanics, and preventive maintenance. Minimum of 2 years related experience. (5+ highly recommended) Completion of high school, vocational training, or equivalent is preferred. Job Type: Full-time Schedule: <ul><li>Day Shift </li><li>8 hour shifts plus overtime (10 hour shift common) </li><li>Saturdays as needed </li></ul>#M1

CNC Operator & Programmer

Job Description Group IV - Gear Set Processor Our culture believes in POWERING YOUR POTENTIAL. We provide global opportunities to develop your career, make your community a better place and work with today's most innovative thinkers to solve the world's toughest problems. We believe in flexibility for you to explore your passions while making an impact through meaningful work within our inclusive workforce. That's what #LifeAtCummins is all about. We are looking for a talented Machinist to join our team specializing in CNC for our Cummins Meritor Location in Fletcher, North Carolina. In this role, you will make an impact in the following ways: • Analyzes and manufactures complex components using machine tool equipment. • Fully proficient setting up and operating machine tools such as lathes, milling machines, shapers, grinders, and Computer Numerical Control (CNC) equipment to machine parts to specifications. • Ability to use precision measuring devices, layout work and set up tool room machines to build or fabricate details and assemble as needed. • Performs and documents preventive, emergency, corrective and predictive maintenance activities. • Schedule maintenance activities around production requirements • Participates actively with local Total Productive Maintenance (TPM) teams in ways to improve quality, safety, process, material flow, and employee development. Responsibilities To be successful in this role you will need the following: • Controls Safety - Recognizes controls related hazards in a manufacturing environment (Electrical, Hydraulic, Pneumatic) to incorporate safe practices and procedures as part of the daily work plan to reduce injuries and create a safe machine environment. • Tool and Fixture Design - Selects work-piece-holding devices capable of effectively holding parts and products during a manufacturing process to secure their position to meet functional requirements. • Health and Safety Fundamentals - Champions and models proactive health and safety behaviors by identifying, reporting, and participating in actions to improve health and safety to build an interdependent culture and contribute to an injury-free workplace. • Manufacturing Knowledge - Demonstrates the knowledge of manufacturing by correctly implementing changes in current processes, equipment, and applications to meet the function's needs and contribute towards continuous improvement. Qualifications Education, Licenses, Certifications • High school diploma or certificate of completion of secondary education or equivalent experience to the extent such experience meets applicable regulations. • This position may require licensing for compliance with export controls or sanctions regulations. Experience • Requires significant relevant work experience or specialized skills obtained through education, training, or on-the-job experience. • Maintains specifications by observing drilling, grooving, and cutting, including turning, facing and thread chasing operations; taking measurements; detecting malfunctions. • Troubleshooting processes. • Adjusting and reprogramming controls. • Sharpening and replacing worn tools. • Adhering to quality assurance procedures and processes. Compensation and Benefits Base salary rate commensurate with experience. Additional benefits vary between locations and include options such as our 401(k) Retirement Savings Plan, Cash Balance Pension Plan, Medical/Dental/Life Insurance, Health Savings Account, Domestic Partners Coverage and a full complement of personal and professional benefits. Cummins and E-verify At Cummins, we are an equal opportunity and affirmative action employer dedicated to diversity in the workplace. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, color, disability, national origin, age, religion, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law. Cummins validates right to work using E-Verify. Cummins will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each new employee's Form I-9 to confirm work authorization.

CNC Machinist - 3rd Shift

OVERVIEW Cadrex is seeking a CNC Programmer II to utilize CAD/CAM software to program and/or operate conventional, special purpose and numerical control (NC) turret presses and laser machines and machining centers to fabricate metallic and nonmetallic parts. KEY RESPONSIBILITIES <ul><li>Interpret engineering drawings, blueprints, and specifications to determine machining requirements and parameters</li><li>Program CNC machines using CAD/CAM software (e.g., Mastercam, GibbsCAM) to generate toolpaths for milling, turning, and other machining operations</li><li>Optimize CNC programs for efficiency, accuracy, and quality, including tool selection, speeds, feeds, and cutting strategies</li><li>Conduct test runs and simulations to verify program accuracy and identify potential issues or optimizations</li><li>Collaborate with engineering, production, and quality control teams to ensure machining processes meet design requirements and quality standards</li><li>Troubleshoot and debug CNC programs, machine tooling, and equipment to resolve machining problems and optimize performance</li><li>Develop and maintain documentation, including CNC programs, setup sheets, tooling lists, and process instructions</li><li>Train and mentor junior CNC programmers and machinists on programming techniques, best practices, and safety protocols</li><li>Stay informed of industry trends, emerging technologies, and best practices in CNC machining and programming</li><li>Adhere to safety protocols and procedures at all times, including proper handling and operation of CNC machines and equipment</li></ul>Requirements PREFERRED QUALIFICATIONS <ul><li>5+ years of experience programming CNC machines in a manufacturing environment preferred</li><li>Proficiency in CNC programming languages, such as G-code and M-code, and CAD/CAM software</li><li>Strong knowledge of machining processes, tooling, and materials, including experience with milling, turning, drilling, and grinding operations</li><li>Ability to interpret engineering drawings, blueprints, and technical specifications</li><li>Excellent problem-solving skills and ability to troubleshoot machining issues and optimize CNC programs</li><li>Strong attention to detail and ability to work with precision and accuracy</li><li>Effective communication and interpersonal skills, with the ability to collaborate with cross-functional teams</li><li>Knowledge of safety regulations and practices related to CNC machining and programming</li><li>Experience with multi-axis machining and complex geometries is a plus</li></ul>EDUCATION <ul><li>High School Diploma</li><li>One year college program certificate; or two to four years related experience and/or training; or equivalent combination of education and experience</li></ul>LOCATION <ul><li>Onsite</li></ul>SCHEDULE <ul><li>M-F</li><li> Up to 10% travel to support other sites </li></ul>WORK ENVIRONMENT <ul><li>While performing the duties of this job, the employee is frequently exposed to work near moving mechanical parts and vibration. The employee is occasionally exposed to the risk of electrical shock. The noise level in the work environment is usually moderate and occasionally loud</li></ul>PHYSICAL DEMANDS <ul><li>While performing the duties of this job, the employee is regularly required to stand, sit, use hands and fingers, handle or feel, and talk or hear. The employee is occasionally required to sit; climb or balance; stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, color vision, depth perception and ability to adjust focus</li></ul>CADREX'S CORE VALUES <ul><li>Safety first, rising to the challenge, collaboration, accountability, and doing the right thing</li></ul>ABOUT US CADREX Manufacturing Solutions is a leading provider of complex sheet metal and machined production parts, assemblies, and weldments for a variety of end markets, including electrical transmission and distribution, warehouse automation, technology, aerospace &amp; defense, medical, food, and industrials. With locations in Colorado, Pennsylvania, Illinois, Washington, Wisconsin, Minnesota, Michigan, Indiana, Massachusetts, Oklahoma, and Monterrey Mexico, CADREX offers numerous in-house manufacturing capabilities, including laser cutting, sheet metal fabrication, complex assembly, CNC punching, CNC machining, forming, robotic welding, stamping, fastener insertion, and tool and die manufacturing, to effectively serve customers with lights-out manufacturing capabilities for mid- to high-volume production. For more information, visit <a href="http://www.cadrex.com" target="_blank">www.cadrex.com</a>. Cadrex provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

CNC Programmer II

OVERVIEW Cadrex is seeking a CNC Programmer II to utilize CAD/CAM software to program and/or operate conventional, special purpose and numerical control (NC) turret presses and laser machines and machining centers to fabricate metallic and nonmetallic parts. KEY RESPONSIBILITIES <ul><li>Interpret engineering drawings, blueprints, and specifications to determine machining requirements and parameters</li><li>Program CNC machines using CAD/CAM software (e.g., Mastercam, GibbsCAM) to generate toolpaths for milling, turning, and other machining operations</li><li>Optimize CNC programs for efficiency, accuracy, and quality, including tool selection, speeds, feeds, and cutting strategies</li><li>Conduct test runs and simulations to verify program accuracy and identify potential issues or optimizations</li><li>Collaborate with engineering, production, and quality control teams to ensure machining processes meet design requirements and quality standards</li><li>Troubleshoot and debug CNC programs, machine tooling, and equipment to resolve machining problems and optimize performance</li><li>Develop and maintain documentation, including CNC programs, setup sheets, tooling lists, and process instructions</li><li>Train and mentor junior CNC programmers and machinists on programming techniques, best practices, and safety protocols</li><li>Stay informed of industry trends, emerging technologies, and best practices in CNC machining and programming</li><li>Adhere to safety protocols and procedures at all times, including proper handling and operation of CNC machines and equipment</li></ul>Requirements PREFERRED QUALIFICATIONS <ul><li>5+ years of experience programming CNC machines in a manufacturing environment preferred</li><li>Proficiency in CNC programming languages, such as G-code and M-code, and CAD/CAM software</li><li>Strong knowledge of machining processes, tooling, and materials, including experience with milling, turning, drilling, and grinding operations</li><li>Ability to interpret engineering drawings, blueprints, and technical specifications</li><li>Excellent problem-solving skills and ability to troubleshoot machining issues and optimize CNC programs</li><li>Strong attention to detail and ability to work with precision and accuracy</li><li>Effective communication and interpersonal skills, with the ability to collaborate with cross-functional teams</li><li>Knowledge of safety regulations and practices related to CNC machining and programming</li><li>Experience with multi-axis machining and complex geometries is a plus</li></ul> EDUCATION <ul><li>High School Diploma</li><li>One year college program certificate; or two to four years related experience and/or training; or equivalent combination of education and experience</li></ul> LOCATION <ul><li>Onsite</li><li>Up to 10% travel to support other sites </li></ul> SCHEDULE <ul><li>M-F</li></ul> WORK ENVIRONMENT <ul><li>While performing the duties of this job, the employee is frequently exposed to work near moving mechanical parts and vibration. The employee is occasionally exposed to the risk of electrical shock. The noise level in the work environment is usually moderate and occasionally loud</li></ul> PHYSICAL DEMANDS <ul><li>While performing the duties of this job, the employee is regularly required to stand, sit, use hands and fingers, handle or feel, and talk or hear. The employee is occasionally required to sit; climb or balance; stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, color vision, depth perception and ability to adjust focus</li></ul> CADREX'S CORE VALUES <ul><li>Safety first, rising to the challenge, collaboration, accountability, and doing the right thing</li></ul> ABOUT US CADREX Manufacturing Solutions is a leading provider of complex sheet metal and machined production parts, assemblies, and weldments for a variety of end markets, including electrical transmission and distribution, warehouse automation, technology, aerospace &amp; defense, medical, food, and industrials. With locations in Colorado, Pennsylvania, Illinois, Washington, Wisconsin, Minnesota, Michigan, Indiana, Massachusetts, Oklahoma, and Monterrey Mexico, CADREX offers numerous in-house manufacturing capabilities, including laser cutting, sheet metal fabrication, complex assembly, CNC punching, CNC machining, forming, robotic welding, stamping, fastener insertion, and tool and die manufacturing, to effectively serve customers with lights-out manufacturing capabilities for mid- to high-volume production. For more information, visit <a href="http://www.cadrex.com" target="_blank">www.cadrex.com</a>. Cadrex provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Pay scale: 28.00-34.00 per hour About Prototek Prototek is a leading national provider of digital based manufacturing services including CNC machining, precision sheet metal fabrication, EDM, and additive manufacturing services. Prototek serves a variety of customer end markets, including aerospace, defense, medical, robotics, electronics, consumer, and general industrial. Prototek has manufacturing locations across the United States including facilities in New Hampshire, Wisconsin, California, Colorado, and Pennsylvania. Prototek is ISO 9001:2015 and AS9100D:2016 certified as well as ITAR Registered. For more information, visit <a href="http://www.prototek.com" target="_blank">www.prototek.com</a>. Job Summary: The role of a CNC Machinist II is to use high level machining techniques and processes to produce accurate and quality parts. This position has attained full proficiency as a CNC Machinist I and can successfully apply CNC principals, procedures, and setups to execute machining strategies. Enthusiasm to further develop machining skills and the ability to demonstrate problem solving skills is crucial for success. ESSENTIAL FUNCTIONS:<ul><li>Read and perform intermediate to complex machining activities in line with company capabilities</li><li>Provide advice or solutions in technical areas for less experienced machinists</li><li>Modify existing programs to enhance efficiency</li><li>Design custom fixtures for work holding as needed</li><li>Determine acceptable surface finishes</li><li>Program and setup multiple machines to perform multi axis (3+1 and/or 3+2 indexing) machining</li><li>Apply lathe concepts to machine parts more efficiently</li><li>Identify opportunities for process improvement and increased efficiencies for machining and tooling selection through research and development</li><li>Perform essential functions of Machinist I</li><li>Other duties as assigned</li></ul>TECHNICAL COMPETENCIES: <ul><li>Proficient knowledge of multi axis (3+1 and/or 3+2 indexing) setup and machining</li><li>Basic knowledge of Lathe concepts</li><li>Proficient knowledge of complex fixturing techniques</li><li>Proficient knowledge of print reading, high tolerance machining and geometric dimensioning</li><li>Proficient knowledge of shop mechanics, mathematics, and measurement</li><li>Proficient knowledge of material properties</li><li>Proficient knowledge of commonly used hand and power tools</li><li>Basic computer literacy</li></ul> BEHAVIORAL COMPETENCIES:<ul><li>Demonstrates motivation and accountability to achieve individual and department goals </li><li>Excellent written and verbal communication skills to collaborate with team members</li><li>Possesses initiative and personal accountability to meet work demands and work effectively under pressure with limited supervision</li><li>Grasps basic concepts, anticipate possible problems and generate solutions with basic problem-solving skills </li><li>Exercises sound judgment in ambiguous situations when time is critical</li><li>Ability to respond and adapt quickly to changing circumstances and facility needs </li><li>Possesses an attention to detail and commitment to effectively produce quality work</li><li>Demonstrates teamwork by sharing knowledge and helping where needed</li></ul>EDUCATION &amp; PROFESSIONAL EXPERIENCE:<ul><li>High School Diploma required</li><li>2-year Machining Degree preferred</li><li>2 years' experience with Sac EDM or 5+ years of relevant setup and machining experience in a related industry</li></ul> PHYSICAL REQUIREMENTS:<ul><li>Ability to walk and stand for extended periods of time </li><li>Ability to use hands and fingers to operate computers, equipment, hand/power tools, etc. and handle and feel parts of various size</li><li>Ability to bend, kneel and crouch occasionally throughout a shift</li><li>Ability to push, pull or lift 50 lbs. moderately throughout a workday, occasionally 50+lbs with a team lift</li><li>Ability to focus vision for: close vision, color vision, depth perception and adjusting to sharp focus</li></ul>WORK ENVIRONMENT:<ul><li>Fast-paced environment </li><li>Noise conditions can be moderate to extreme. Hearing protection will be provided if needed and/or by request</li><li>Exposure to fumes and/or airborne particles </li><li>Moving mechanical parts and vibrations</li><li>Exposure to hot metal and machining components</li><li>Exposure to various types of coolants and oils</li></ul>WORK HOURS:<ul><li>1st Shift Work Schedule: 5 - 8-hour shifts</li><li>2nd Shift Work Schedule: 5 - 8-hour shifts</li><li>Overtime as necessary</li><li>Flexible scheduling in agreement with supervisor</li></ul> What Prototek Offers:<ul><li>Career advancement opportunities</li><li>Flexible Schedule </li><li>Competitive pay scale</li><li>Paid time off (PTO) starting at 80 hours with annual increase for each year of service</li><li>9 paid Holidays annually</li><li>Education reimbursement program</li><li>Health, dental, vision, life and short-term disability insurance </li><li>Company paid life and long-term disability insurance </li><li>Employee Assistance Program (EAP) </li><li>401(k) match: 100% of 3% and 50% for 4% and 5%</li></ul>Work Authorization This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. We are an Equal Opportunity Employer, making decisions without regard to race, color, religion, sex, national origin, sexual orientation, gender, gender identity, veteran status, disability, or any other protected class. EEO is The Law - click here for more information: <a href="https://www.eeoc.gov/sites/default/files/migrated_files/employers/poster_screen_reader_optimized.pdf" target="_blank">https://www.eeoc.gov/sites/default/files/migrated_files/employers/poste…</a> We endeavor to make this site accessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process, please contact 603-746-2001 or email us: <a href="mailto:HR@PROTOTEK.COM" target="_blank">HR@PROTOTEK.COM</a>. You may also write to us and we will be happy to assist you with the application: Prototek, 205 Pine St., Hopkinton, NH 03229

CNC Machinist II

Pay scale: 22.00-28.00 per hour About Prototek Prototek is a leading national provider of digital based manufacturing services including CNC machining, precision sheet metal fabrication, EDM, and additive manufacturing services. Prototek serves a variety of customer end markets, including aerospace, defense, medical, robotics, electronics, consumer, and general industrial. Prototek has manufacturing locations across the United States including facilities in New Hampshire, Wisconsin, California, Colorado, and Pennsylvania. Prototek is ISO 9001:2015 and AS9100D:2016 certified as well as ITAR Registered. For more information, visit <a href="http://www.prototek.com" target="_blank">www.prototek.com</a>. Job Summary: The role of a CNC Machinist I is to produce quality machined parts by accurately and efficiently operating CNC machines. This position will be responsible for seeing machining and programming activities from beginning to end to achieve compliance with quality standards and customer requirements. This position will have a basic understanding of how the prototype process applies to CNC machining. ESSENTIAL FUNCTIONS:<ul><li>Read and interpret prints </li><li>Select and prepare raw materials for machining</li><li>Understand how to apply basic lathe and mill concepts to machine parts more efficiently</li><li>Perform dimensional and visual inspection of parts per specifications using basic measuring equipment</li><li>Collaborate with supervisor, project managers, and other shop personnel to clarify project requirements and resolve issues</li><li>Understand intended purpose of the tumblers and operate when necessary</li><li>Assist with cleaning and preventative maintenance of machines, tools, and workstations</li><li>Maintain a safe, clean, and organized work environment</li><li>Other duties as assigned</li></ul> TECHNICAL COMPETENCIES: <ul><li>Basic knowledge of print reading</li><li>Basic understanding of shop mechanics, mathematics, and measurement</li><li>Basic knowledge of material properties</li><li>Proficient knowledge of commonly used hand and power tools</li><li>Basic computer literacy</li></ul>BEHAVIORAL COMPETENCIES:<ul><li>Demonstrates motivation and accountability to achieve individual and department goals </li><li>Excellent written and verbal communication skills to collaborate with team members</li><li>Possesses initiative and personal accountability to meet work demands and work effectively under pressure with limited supervision</li><li>Grasps basic concepts, anticipate possible problems and generate solutions with basic problem-solving skills </li><li>Exercises sound judgment in ambiguous situations when time is critical</li><li>Ability to respond and adapt quickly to changing circumstances and facility needs </li><li>Possesses an attention to detail and commitment to effectively produce quality work</li><li>Demonstrates teamwork by sharing knowledge and helping where needed</li></ul>EDUCATION &amp; PROFESSIONAL EXPERIENCE:<ul><li>High School diploma or equivalent required</li><li>2-year Machining Degree preferred, or 3+ years of equivalent machining experience in a related industry</li></ul>PHYSICAL REQUIREMENTS:<ul><li>Ability to walk and stand for extended periods of time </li><li>Ability to use hands and fingers to operate computers, equipment, hand/power tools, etc. and handle and feel parts of various size</li><li>Ability to bend, kneel and crouch occasionally throughout a shift</li><li>Ability to push, pull or lift 50 lbs. moderately throughout a workday, occasionally 50+lbs with a team lift</li><li>Ability to focus vision for: close vision, color vision, depth perception and adjusting to sharp focus</li></ul>WORK ENVIRONMENT:<ul><li>Fast-paced environment </li><li>Noise conditions can be moderate to extreme. Hearing protection will be provided if needed and/or by request</li><li>Exposure to fumes and/or airborne particles </li><li>Moving mechanical parts and vibrations</li><li>Exposure to hot metal and machining components</li><li>Exposure to various types of coolants and oils</li></ul>WORK HOURS:<ul><li>1st Shift Work Schedule: 5 - 8-hour shifts</li><li>Overtime as necessary</li><li>Flexible scheduling in agreement with supervisor</li></ul>What Prototek Offers:<ul><li>Career advancement opportunities</li><li>Flexible Schedule </li><li>Competitive pay scale</li><li>Paid time off (PTO) starting at 80 hours with annual increase for each year of service</li><li>9 paid Holidays annually</li><li>Education reimbursement program</li><li>Health, dental, vision, life and short-term disability insurance </li><li>Company paid life and long-term disability insurance </li><li>Employee Assistance Program (EAP) </li><li>401(k) match: 100% of 3% and 50% for 4% and 5%</li></ul>Work Authorization This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. We are an Equal Opportunity Employer, making decisions without regard to race, color, religion, sex, national origin, sexual orientation, gender, gender identity, veteran status, disability, or any other protected class. EEO is The Law - click here for more information: <a href="https://www.eeoc.gov/sites/default/files/migrated_files/employers/poster_screen_reader_optimized.pdf" target="_blank">https://www.eeoc.gov/sites/default/files/migrated_files/employers/poste…</a> We endeavor to make this site accessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process, please contact 603-746-2001 or email us: <a href="mailto:HR@PROTOTEK.COM" target="_blank">HR@PROTOTEK.COM</a>. You may also write to us and we will be happy to assist you with the application: Prototek, 205 Pine St., Hopkinton, NH 03229

935 Full Time Jobs