field_remote_option

field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

field_job_salary_range

Ellwood Crankshaft Group (ECG) is the world's leading manufacturer of large, one-of-a-kind, multiple-throw crankshafts. ECG's products and services include crankshafts and eccentrics used in mechanical stamping presses, reciprocating air and gas compressors, reciprocating pumps, engines, mechanical shears, rock crushers, homogenizers and other miscellaneous applications. ECG services the locomotive, shipping, mechanical press, oil and gas and compression markets. Today, ECG has four facilities in PA. We are currently seeking a full-time CNC Machinist I position in Hermitage, PA. This non-exempt position will operate large, CNC-controlled lathes, mills and rough crankshaft milling machines. Duties and responsibilities of this position are dynamic and may change over time due to business needs and the candidate may be required to work rotating shifts, 12-hour schedules and overtime as needed. QUALIFICATIONS: <ul><li>High School diploma or GED</li><li>Valid Driver's License</li><li>Three or more years horizontal boring mill machining experience required</li><li>3 axis CNC horizontal mill experience with Fanuc Control experience preferred</li></ul><ul><li>Strong analytical skills and demonstrated problem-solving abilities</li><li>Familiar with general computer applications</li><li>Excellent organizational skills</li><li>Must be results oriented with a strong desire to succeed</li><li>Solid verbal and written communication skills</li><li>Proficient at operating forklifts, overhead cranes, and other heavy equipment</li><li>Previous experience in a heavy manufacturing environment</li><li>Ability to work a variety of work schedules and overtime as needed</li></ul>RESPONSIBILITIES WILL INCLUDE: <ul><li>Flexibly perform all tasks responsible for the complete or partial manufacture of components and/or assemblies as directed by drawings, sketches or other form of instruction in support of the manufacturing process as it exists and may change from time to time.</li><li>Operate CNC controlled 5-axis milling equipment with the ability to meet and hold close tolerances as determined by specifications:</li></ul><ul><li>Knowledge of digital readouts required;</li><li>Machine and equipment including, but not limited to; CNC controlled mills, CNC lathes, and including polishing and inspecting;</li><li>Plans and performs setups, layouts and execution of work according to product specifications, blueprints, drawings and work instructions;</li><li>Determines proper operation sequence, selects speeds, feeds and cutting tools according to type of materials and finish requirements;</li><li>Capable of using conventional and precision measuring instruments.</li></ul><ul><li>Performs in process inspections, certifications and documentation as needed.</li><li>Understands and can effectively execute the principles of metalworking, including tool and material selection, tool geometry, feeds and speeds.</li><li>Performs all work in accordance with plant safety rules.</li><li>Maintains highest quality standards in the execution of all assigned work.</li><li>Maintains all reports and recordkeeping as required.</li><li>Performs routine preventative maintenance on machines as required.</li><li>Maintains housekeeping in all work areas and performs other routine labor work as assigned and as required in accordance with production flow and/or plant needs.</li></ul>SKILLS NEEDED: <ul><li>Ability to read and interpret CNC program manuscripts</li><li>Ability to perform basic trouble-shooting of CNC programs</li><li>Ability to use precision measuring instruments</li><li>Ability to determine manufacturing sequencing</li><li>Ability to perform final inspection to assure compliance with all customer specifications</li></ul>Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Activity, Condition or Physical Requirement Rarely (0-10%) Sometimes (10+ - 25%) Frequently (25+ - 50%) Regularly (50+ - 80%) Always (80+ - 100%) Travel (by car and/or air) X Standing X Sitting X Walking X Talking X Hearing X Climbing X Balancing X Stooping X Kneeling X Crouching X Crawling X Reaching X Pushing X Pulling X Lifting X Grasping X Finger manipulation X Feeling/touching X Hand/arm repetitive motion X Foot repetitive motion X Physical requirement: x Very Heavy This position will require occasional material handling up to 120 pounds which could include floor lifts, shoulder lifts, overhead lifts, etc. The position will require frequent material handling up to 70 pounds. The position will require frequent bending and squatting and constant standing, walking and reaching. Visual acuity requirement - Includes color, depth perception and field of vision: x Close visual acuity Visual inspection involving small defects of parts such as rust, burrs, debris using visual inspection devices close to the eye or at a distance. Ability to see lifting equipment placement when loading, unloading, moving parts. Working Conditions: x Manufacturing environment with some exposure to loud noises, changing temperatures, machinery with moving parts Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

CNC Machinist I 3 Axis Mill

COMPANY OVERVIEW: CPM Holdings, Inc. is a diversified leading global supplier of process equipment and engineered technologies that sustainably feed, fuel, and build a better world. With its growing family of 17 market-leading product brands, CPM serves a variety of industries including animal feed, consumer food, green energy, advanced materials, and sustainable packaging. Founded in 1883, CPM has 1,700 employees across 36 facilities on 4 continents with presence in 150+ countries. From the foods you eat to the fuels you require; CPM plays an important role in making the world more efficient and more sustainable. For more information, visit OneCPM.com. POSITION OVERVIEW (Job Summary): The CPM Process Solutions Segment has a unique opportunity for a CNC Press Brake Operator in our capital equipment manufacturing facility in Lexington, NC. This is an opportunity to join a highly successful business with advancement opportunities. We are looking for a highly motivated detail-oriented person with strong technical mechanical aptitude coupled with proficient organizational skills, and outstanding people skills. This position is responsible for, but not limited to, setting up CNC Press Brakes, deburring completed parts, and working closely with the Production Manufacturing and the Engineering Group. ESSENTIAL JOB DUTIES: <ul><li> Ability to read and interpret blueprints and specifications.</li><li>Ability to interpret drawings and hit multiple bend lines in the right order.</li><li>Able to perform basic math, algebra, and simple geometry.</li><li>Must be able to read/use angle ruler, digital or dial calipers, and tape measure.</li><li>Must be able to determine whether a part is possible to bend by looking at the drawings.</li><li>Knows or can learn how material stretches when bent.</li><li>Set up and operate the CNC press brake machine to bend, form, and shape sheet metal according to blueprints and specifications.</li><li>Select and install appropriate tooling and dies for each job. - Measure and inspect finished products to ensure they meet quality standards. - Adjust machine settings as needed to achieve desired results. - Monitor machine operation and troubleshoot any issues that may arise - Follow safety protocols and maintain a clean and organized work area.</li><li>Must be able to lift 50lbs at times.</li></ul> SKILLS AND ABILITIES: <ul><li>Previous experience operating press brake machines or similar equipment</li><li>Proficiency in reading blueprints</li><li>Knowledge of sheet metal fabrication techniques and processes</li><li>Familiarity with CNC (Computer Numerical Control) programming is a plus.</li><li>Ability to use measuring tools such as calipers, micrometers, and gauges.</li><li>Strong attention to detail and ability to work with precision.</li><li>Ability to lift heavy objects and operate a crane if necessary.</li><li>Good communication skills and a team player are a must.</li></ul>EDUCATION AND EXPERIENCE REQUIREMENTS: <ul><li>High School Diploma</li><li>5 years experience </li></ul>PHYSICAL REQUIREMENTS: <ul><li>Must be able to lift up to 50 lbs.</li><li>Prolonged periods of standing</li><li>Bending, lifting, pulling, pushing</li><li>Lifting/Carry</li><li>Withstand uncontrolled environment, winter, summer, spring, fall, seasons in a manufacturing atmosphere.</li></ul>ADDITIONAL INFORMATION: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. CPM Acquisition Corp. is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. CPM Acquisition Corp. offers competitive compensation and benefits, including paid holidays and vacations, 401k, medical/dental insurance, tuition assistance, and more.

CNC Press Brake Operator

About Company: What Does Prolec GE Waukesha Do? JOB SUMMARY To setup, operate, load and unload CNC machines to produce parts that will achieve optimum quality and efficiency levels while meeting the requirements of the engineering design. PRINCIPLE DUTIES AND RESPONSIBILITIES <ul><li>Interprets and understand simple and complex part drawings.</li><li>Uses precision measuring tools such as micrometers, Vernier's, scales, protractors, compass, height gage, dial indicators, etc. </li><li>Uses machine control codes, computers, and part nesting, DNC links, and file transfers to produce parts.</li><li>Utilizes machine control capabilities to make simple part programs, prove out programs and edit programs as a normal part of the setup and operation of CNC machines and related equipment.</li><li>Performs normal operator maintenance as prescribed by equipment builder to include the replacement of consumable materials and parts. </li><li>Performs multiple activities simultaneously, organizes work, and takes corrective action in response to error messages and/or process interruptions. </li><li>Assists with supervision in the training of other machine operators and helpers. </li><li>Diagnoses machine problems and repair of the machines. </li><li>Assumes leadership role and takes responsibility for overall performance of equipment.</li><li>Meets production standards by monitoring machine performance to include managing up time and quality standards. Use of punch dies and pressures used in the hydraulic forming of steel and alloys. </li><li>Very proficient at performing oxy/fuel flame and plasma cutting, part layout, inspection, hole drilling, tapping and milling to include an understanding of speed and feed rates. </li><li>Reads, understands, and follows guidelines set forth by E.I.s, M.P.s, S.P.s, O.I.C.s, and blueprints when performing assigned work.</li><li>Comply with all safety policies and procedures and actively participate in defined zero harm safety culture driven initiatives.</li></ul> KNOWLEDGE, SKILLS &amp; ABILITIES TOOLS AND MACHINERY CNC machines such as saws, press brake, manual mills, plasma cutter and CNC Flex machine. Tools include micrometers, Vernier's, scales, protractors, compass, height gage, dial indicator, tape measure, go-no-go gauges and squares. MATERIALS Personal protective equipment to include safety glasses, steel toed shoes, hearing protection, welding apron, face shield, and appropriate gloves. GENERAL Works under minimal supervision. Must be a self-starter with excellent problem solving and decision making skills. Acts decisively with a sense of urgency to maximize machine production and minimize down time. Strong knowledge of mathematics, to include geometry, to determine unknown part dimensions and/or relationships. Knowledge of metal types and characteristics. Understanding of the part use, fit and function as well as the manufacturing processes utilized is essential. Experience working with computers and machine controls. EDUCATION AND EXPERIENCE High school diploma or G.E.D. equivalent ADDITIONAL INFORMATION The above description covers the principle functions of the job. It is not intended to be a complete listing of all the miscellaneous, incidental, or substantially similar duties, which may be assigned during normal or emergency operations. Prolec-GE Waukesha, Inc. is an equal opportunity employer and makes employment decisions without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, genetic information, disability, protected veteran status, or any other reason prohibited by applicable law.

CNC/Machine Operator

Key Responsibilities include: • Assist in performing setups. • Operate CNC lathe in accordance to VAM USA operating instructions. • Skillfully make necessary adjustment to CNC program or machine control offsets to assure compliance to all dimensions and quality requirements. • Use precision gages, micrometers and other applicable measurement instruments to validate compliance of product. • Maximize efficiency and productivity at all time. • Responsible for quality of work meeting all requirements. • Follow all Company work instructions, specifications and requirements. • Follow all Company Rules, Procedures and Policies. • Follow all Company Safety Rules. • Any other duties as assigned by Leadman or Line Manager. Requirements • High School education or equivalent is required. • Minimum of 2 years of experience as a CNC Machinist . • Must have a good understanding of machine shop operations and processes. • Ability to read, write and speak English. • Ability to read blueprints, micrometers and other precision measuring instruments. • Ability to understand and execute instructions well.

CNC Machinist

Responsibilities:<ul><li>Follows the procedures established in the work instructions or by the Supervisor(s) and/or Lead(s)</li><li>Follows prescribed standards of CNC Mill operations and set-ups of established processes</li><li>Pays strong attention to detail, exhibits critical thinking skills and meets set cycle times</li><li>Takes an active role in organizing and improving current processes through SWI change suggestions</li><li>Is proactive in maintaining established company policies and manufacturing strategies</li><li>Sets up equipment to run production and/or prototype parts according to blueprints</li><li>Develops new work instructions for prototype parts</li><li>Troubleshoots processes, programs, equipment and tooling</li><li>Performs shop floor programming and editing of CNC programs to maintain product quality</li><li>Adapts and modifies as circumstances warrant</li><li>Demonstrates safe work habits</li><li>Completes end-of-shift tie-in log and accurately enters part and scrap counts into Paperless </li></ul>Qualifications:<ul><li>High School Diploma or GED</li><li>CNC Machining Certificate preferred</li><li>Minimum of 5 years in CNC Mill setup and machining</li><li>Experience with various machine tool controls (G-M Codes &amp; Mazatrol a plus)</li><li>Quality-conscious attitude and pride of ownership in designated responsibilities</li><li>Working knowledge of GD&amp;T and calculating </li><li> Working knowledge of mathematical formulas needed to calculate product dimensioning</li><li>Effective verbal and written communication skills</li><li>Ability to accurately read blueprints </li><li>Must be able to read and comply with work instructions, quality documents, and other pertinent written material</li></ul>

Hiring for "CNC Mill Machinist" - Spokane Coeur d'Alene Area, WA(Full-Time)

Job Title CNC Machinist Plant/Location Trevose, PA 19053 US (Primary) Job Type Hourly Category Manufacturing and Production Career Level Experienced (Non-Manager) Education No high school diploma Job Accountabilities Since 1942 H-V Industries has continued to lead the way with development of highly innovative products that have shaped the industry. Today our highly-skilled workforce, supported by a complete compliment of machinery, equipment and processes, continues to support a multitude of industries and customers around the world. It is this innovative spirit and the drive to explore new markets that keeps us at the forefront of the latest technical advances and continues to drive us forward. H-V Industries is a part of Crown Cork and Seal USA, Inc., a world leader in the Packaging Industry, but H-V also serves many other customers in a wide variety of industries. H-V provides a competitive wage and comprehensive benefits package that includes COMPANY PAID: medical/dental/vision/life/disability pay insurances, vacation, holidays, and educational assistance. Other benefits include a 401(k) with company match. Duties/Responsibilities of this position include: <ul><li>CNC Machinist capable of running both Lathes and Mills</li><li>Candidate should be proficient in operating various machine/control configurations and have experience in the manufacture of tool and die parts.</li><li>Works with minimal supervision</li><li>Setup tooling and specified cutters as required</li><li>Perform simple programming changes and edits to maximize productivity, and read and interpret Engineering drawings</li><li>Perform frequent checks of parts to ensure dimensional requirements are met</li></ul> Summary of essential job functions: <ul><li>Setup of machine including parts and tooling</li><li>Make modifications to programs where needed</li><li>Verify first part qualification</li><li>Perform preventative maintenance to equipment including daily, weekly and monthly maintenance and checks</li></ul> CarnaudMetalbox Engineering (CMB Engineering) designs, develops, and manufactures high-performance metal forming and finishing machinery for the production of beverage, food and aerosol cans. Furthermore, with our commitment to innovation and precision engineering, we continually strive to break the mold. With CMB Engineering, can manufacturers are able to keep up with consumer demands; as well as capitalize on market opportunities, while ensuring production efficiency. CarnaudMetalbox Engineering Limited is a UK based company, but wholly owned by Crown Holdings, Inc. Crown Holdings is a global leader in the design, manufacture, and sale of packaging products for consumer goods. At Crown, we are passionate about helping our customers build their brands and connect with consumers around the world. We do this by delivering innovative packaging that offers significant value for brand owners, retailers, and consumers alike. With operations in 47 countries employing over 33,000 people and net sales of over $11 billion, we are uniquely positioned to bring best practices in quality and manufacturing to our customers to drive their businesses locally and globally. Job Requirements Minimum requirements: <ul><li>Minimum of 3-5 years experience operating both Mills and Lathes, great training opportunity for the mechanically inclined.</li></ul> Abilities required: <ul><li>Lifting and carrying of parts and or fixtures weighing from 2-100 lbs frequently</li><li>Operate machine controls positioned 4-5 feet from shop floor</li><li>Able to perform at work benches set at 36-40 height</li><li>Standing and walking continuously for 8 hours per workday</li><li>Forward bending required while loading and unloading machine and operating controls</li><li>Move carts containing parts weighing up to 200 lbs.</li></ul> Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Travel None/Not Specified Crown is an equal opportunity employer. Crown does not discriminate against any candidate or employee on the basis of race, national origin, sex, marital status, sexual orientation, age, disability, religion, veteran status, or any other status protected by law.

Offering Sign on Bonus, $500 payable at 6-month anniversary, $750 payable at 12-month anniversary DESCRIPTION: The CNC Machinist will perform accurate and timely set-ups utilizing CNC mill or lathe machining centers. Proficient in accurate change-over of machine set-ups. Ensure conformance to customer requirements using calibrated measuring equipment and visual inspection. Record and comprehend company work instructions and set-up books. ESSENTIAL DUTIES: <ul><li>Setup and operate CNC lathe or mill for production operation.</li><li>Observe machine operation to detect malfunctions or out-of-tolerance machining and adjust machine controls as needed.</li><li>Responsible for DNC communications, downloading tool programs.</li><li>Inspect and measure parts according to set-up book inspection callouts.</li><li>Monitor and replace tools in accordance with tool life management system, document all tool changes.</li><li>Ensure company procedures and "best machining practices" are being followed.</li><li>Perform additional related duties as assigned.</li><li>Comply with applicable environmental, health and safety laws and regulations, Company policy and accepted safe work practices.</li></ul>EDEUCATION AND/OR EXPERIENCE: <ul><li>Minimum 5 years CNC experience in a manufacturing environment; OR 2 years CNC experience in a manufacturing environment with certificates of completion for machining levels 1 &amp; 2 and an Associates of Applied Science in Manufacturing and Production Technology.</li><li>Demonstrated ability at operating CNC Machines and interpreting G &amp; M codes.</li><li>Changing cutting tools and accurately adjusting offsets.</li><li>Ability to set-up jobs independently.</li><li>Ability to read part drawings, apply GD&amp;T concepts and rules to understand geometric requirements.</li><li>Ability to correctly use and interpret measuring tools including micrometers, calipers, thread gages, chamfer gages, pin gage, test indicators, drop indicators, height gages, optical comparators.</li><li>Implement 6S concepts.</li><li>Basic computer skills: Excel, Word, Outlook.</li><li>Knowledgeable in Lean Manufacturing preferred.</li><li>Visual inspection experience preferred.</li><li>Detail oriented and strong organizational skills.</li><li>Excellent written and verbal communication skills.</li></ul>PHYSICAL DEMANDS WHILE PERFORMING THE JOB: <ul><li>Standing for long periods of time, walking, pushing, pulling, stooping, kneeling, or crouching, use hands to finger, handle, or feel parts; reaching with hands and arms and overhead; talking and/or hearing instructions and sounds.</li><li>Occasionally lift and/or move up to 40 pounds.</li><li>Close vision, color vision, depth perception, and ability to adjust focus.</li><li>Ability to differentiate shades and color to identify coating defects.</li><li>Near acuity and accommodation are required for reading dial and digital gauges, blueprints, and precision measuring instruments used in the inspection of coating operations.</li></ul>WORKING ENVIRONMENT OF THE JOB: <ul><li>Regularly exposed to moving mechanical parts.</li></ul><ul><li>Occasionally exposed to toxic or caustic chemicals and risk of electrical shock.</li><li>High noise levels from operating machines.</li><li>Physical hazards from moving equipment and machine parts.</li><li>The employee will be required to use personal protective equipment (PPE) to prevent exposure to hazardous materials commonly used in a manufacturing environment.</li></ul>2nd Shift-Monday-Friday. Start time of 3:30 pm. 10-hour shifts

2nd Shift-AZ CNC Machinist II

Job Type Full-time Description Shift: 3:00 PM to 1:30 AM / Monday to Thursday (Fridays off) 5% shift differential Position/Job Summary Sets up and operates numerically controlled horizontal/vertical lathe/mill to perform machining operations (turning, boring, facing, threading) using castings, billet, and bar stock. Reads process sheets/work instructions and blueprints to determine machining to be performed. Essential Functions <ul><li>Sets up, programs, and operates equipment as directed.</li><li>Completes customer product requirements as associated with work orders.</li><li>Determines appropriate tooling/gages for part production/inspection.</li><li>Performs in-process inspections as required to ensure 100% quality product.</li><li>Identifies discrepancies in estimated setup and run times and resolves with supervisor.</li><li>Responsible for document and data control of programs, tool lists, and other related data with respect to job packets/travelers.</li><li>Responsible for cleaning and performing general maintenance on equipment as scheduled or required.</li><li>Responsible for maintaining a clean, organized work area in accordance with Company programs, policies, and procedures.</li><li>Responsible for stopping production if a part or process problem is identified and notifying supervisor or Quality personnel.</li><li>Initiates nonconforming product procedures when necessary.</li><li>Responsible for mentoring and/or training of other personnel as assigned.</li><li>Responsible for identification and elimination of any unnecessary waste.</li><li>Responsible to ensure production time and quantities are accurately clocked to jobs, together with shift clock in and clock out times for payroll purposes. Responsible to review Daily Labor Reports for accuracy.</li><li>Participates in corrective and preventative activities as required.</li><li>Provides assistance to other Departments as necessary or required.</li><li>Remains productive by seeking out tasks and assisting others when slow or idle.</li><li>Participates in and supports the Company Quality System and all Environmental, Health, and Safety policies.</li><li>Responsible to participate in continuous improvement and associated training.</li><li>Responsible to adhere to the Company Quality Policy and to understand and follow all applicable Quality Work Instructions, Policies, and Procedures.</li><li>Responsible to understand and adhere to all applicable Company Work Instructions, Policies, and Procedures.</li><li>Performs other duties as assigned.</li></ul>This posting has no deadline because we accept applications on an on-going basis. Requirements Education/Skills/Abilities <ul><li>High school diploma or G.E.D.</li><li>Prefer at least 1 year of machining experience</li><li>General programming skills.</li><li>Basic shop math (addition, subtraction, trigonometry) .</li><li>Blueprint reading and GD&amp;T skills.</li><li>Ability to perform part inspection using inspection equipment.</li><li>Good understanding of gage calibration.</li><li>Ability to perform own set-ups helpful.</li><li>Basic understanding of Quality Systems.</li><li>Technical trade certification or related experience.</li><li>Solid communication and teamwork skills.</li><li>A team player, willing to take on extra tasks as necessary and create/maintain healthy working relationships.</li></ul>Physical Demands &amp; Work Environment <ul><li>Working conditions are normal for both the office and manufacturing environment.</li><li>While performing duties of this position, the employee is frequently required to stand (for moderate to long periods of time), walk, use hands to finger/handle/feel objects, and reach with hands and arms. Other frequent activities include, but are not limited to, push/pull of objects, bending, climbing, balancing, stooping, and twisting (torso).</li><li>Work may involve lifting of materials and products up to 50 pounds.</li><li>Working in the manufacturing environment requires the use of safety equipment to include, but not limited to safety glasses, safety shoes/boots, and gloves. Loose fitting clothes and jewelry are not permitted. Long hair is required to be tied back. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.</li></ul>This Job Description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee holding this position. Duties, responsibilities, and activities may change at any time with or without notice Salary Description $20-$40 hour

2nd shift CNC Machinist

Job Type Full-time Description Machinist Functions: <ul><li>Sets up, programs, and operates machinery and equipment as directed.</li><li>Completes customer product requirements as associated with work orders.</li><li>Determines appropriate tooling/gages for part production/inspection.</li><li>Performs in-process inspections as required to ensure 100% quality product.</li><li>Identifies discrepancies in estimated setup and run times and resolves with supervisor.</li><li>Responsible for document and data control of programs, tool lists, and other related data with respect to job packets/travelers.</li><li>Responsible for cleaning and performing general maintenance on equipment as scheduled or required.</li><li>Responsible for maintaining a clean, organized work area in accordance with Company programs, policies, and procedures.</li><li>Responsible for stopping production if a part or process problem is identified and notifying supervisor or Quality personnel.</li><li>Initiates nonconforming product procedures when necessary.</li></ul>Programmer Functions: <ul><li>Prepares programs for EIA machines.</li><li>Maintains organized files with appropriate part information.</li><li>Works with production and engineering personnel to develop efficient work holding methods.</li><li>Edits programs on the production floor using machine specific programming methods.</li><li>Prepares/processes drawings to aid in manufacturing of product.</li><li>Controls programs/process drawings (revision levels, etc.) .</li><li>Prepares overlays for inspection of parts.</li><li>Maintains open communication with production personnel to ensure accurate programming information is provided.</li><li>Programs and ensures the Integrex is operating continuously, productively, and to customer schedules.</li><li>Helps develop setups and workflow that will allow significant second shift up time on the Integrex.</li><li>Programs for other 3, 4, and 5 axis machines.</li><li>Assists other Employees with technical questions/issues.</li></ul>Shared Functions: <ul><li>May create, revise, or finalize Work Instructions.</li><li>Responsible for stopping production if a part or process problem is identified and notifying Manager or Quality personnel.</li><li>Responsible for mentoring and/or training of other personnel as assigned.</li><li>Responsible for identification and elimination of any unnecessary waste.</li><li>Participates in corrective and preventative activities as required.</li><li>Responsible to ensure production time and quantities are accurately clocked to jobs, together with shift clock in and clock out times in M2M/Shop Floor Manager for payroll purposes. Responsible to review Daily Labor Reports for accuracy.</li><li>Remains productive by seeking out tasks and assisting others when slow or idle.</li><li>Maintains open communication and works with other Departments as required or necessary.</li><li>Participates in and supports the Company Quality System and all Environmental, Health, and Safety policies.</li><li>Responsible to participate in continuous improvement and associated training.</li><li>Responsible to adhere to the Company Quality Policy and to understand and follow all applicable Quality Work Instructions, Policies, and Procedures.</li><li>Responsible to understand and follow all applicable Company Work Instructions, Policies, and Procedures.</li><li>Performs other duties as assigned.</li></ul>This posting has no deadline because we accept applications on an on-going basis. Requirements <ul><li>Preferred at least 3 years of aerospace CNC machining and programming experience, or a combination of education and related aerospace experience resulting in full knowledge of the practices, procedures, capabilities, and requirements of the position and machinery, but not less than 1 year.</li><li>Proficient use of Mastercam v.10.</li><li>Advanced computer skills.</li><li>CAD/CAM proficiency.</li><li>High level of blueprint reading and interpretation skills.</li><li>Comprehensive knowledge and understanding of appropriate inspection techniques and GD&amp;T.</li><li>Ability to competently perform part inspection using inspection equipment.</li><li>Knowledge of raw materials and properties.</li><li>Full understanding of Quality Systems.</li><li>Exceptional analytical and problem-solving skills.</li><li>Solid decision-making skills.</li><li>Strong communication and interpersonal skills.</li><li>Results driven; stress tolerance.</li><li>Committed to adhering to established work schedule with zero absences or tardy occurrences.</li><li>Ability to perform work accurately and thoroughly with attention to detail.</li><li>Ability to work well in a fast-paced environment with frequently changing dynamics.</li><li>Ability to work with multiple deadlines and commitments with little or no supervision; strong organizational, planning, and time management skills.</li><li>A team player, willing to take on extra tasks as necessary and create/maintain healthy working relationships.</li></ul>Salary Description $20-$40 hour

RELOCATION ASSISTANCE: No relocation assistance available CLEARANCE TYPE: None TRAVEL: No Description At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman is looking for a CNC Machinist 3 -Intern to join our Promontory, Utah team. As one of the largest global security companies in the world, Northrop Grumman is proud to help our nation's military personnel make the transition to civilian careers. Approximately 1/4th of Northrop Grumman's 90,000 employees self-identify as veterans, and more than 1,600 are reservists. The Northrop Grumman Military Internship Program (NG-MIP) is an approved SkillBridge Program under Dept. of Defense Instruction 1322.29. The NG-MIP program is an opportunity for transitioning service members to gain valuable civilian work experience through an individual internship during their last 6 months of service, for up to 180 days. The Northrop Grumman Military internship Program is open to all ranks and experience levels. SkillBridge participants are not eligible for compensation from Northrop Grumman, as they continue to receive military compensation and benefits as active-duty service members. Responsibilities for this internship position are: Northrop Grumman Corporation (NGC) has developed the Northrop Grumman - Military Internship Program (DoD SKillbridge) utilizing the DoDI guidance for Skillbridge. During this program the service member will be on-site at his or her host company performing an individual internship in an entry to mid-level career type role. The service member will be on the job training supporting a work schedule equivalent to 40hrs per week. Outlined below are the Goals, Objectives, and Outcomes for the program. Goals - Provide transitioning service members fellowship-style job skills training during the last portion(s) of their military commitment. This program is specifically designed to offer internships that result in the potential to transition to a full-time opportunity as the conclusion of the training. Interns will serve as a pipeline for high-speed, motivated military candidates into NGC. Objectives - Service Members who complete the Intern program will be highly-trained, capable, future employees that align to the specific needs of the organization and are prepared to meet the NG mission "Defining Possible" on Day 1. This program provides a comprehensive internship experience including professional development, networking with leadership, and training specifically focused on NG leadership principles, company history, customer/stakeholder engagement, product and service overview, and core job responsibilities. Outcome - Offer transitioning service member a rewarding opportunity to join the Northrop Grumman team. DoD SkillBridge Eligibility: • Has served at least 180 days on active duty • Is within 12 months of separation or retirement • Will receive an honorable discharge • Has taken any service TAPS/TGPS • Has attended or participated in an ethics brief within the last 12 months • Received Unit Commander (first O-4/Field Grade commander in chain of command) written authorization and approval to participate in DoD SkillBridge Program prior to start of internship. Candidate will be required to satisfy the requirements for a TSA access certification. (Costs will be paid for by Northrop Grumman.) Propulsion Systems is currently seeking a Machinist 3 to join our Machine Shop team at our Promontory, Utah plant. Role Description &amp; Responsibilities: This job involves machining parts per specification by setting up and operating CNC equipment. The Machinist is responsible for: quality of the product by performing both in-process and final part inspections, care and maintenance of the equipment, assuring tooling and materials readiness, and maintaining a clean and safe work environment. This position will require the individual to provide training to others in all aspects of CNC equipment setup, operation and maintenance. Competencies for Success: • Strong interpersonal communication skills with ability to work with others at all levels of the organization • Proven track record training mid to upper skill level machine operators • Strong attention to detail and accuracy • Ability to prioritize • Excellent time management skills • Ability to work independently Ability to work in a dynamic, fast paced, diverse environment • Initiative, self-starter, adaptable, and high motivation for excellence • High energy, results oriented, self-motivated / self-reliant, team player Basic Qualifications: • A minimum of a 2-year technical degree and/or a certificate in machine shop technology. • 2 Years related machining experience. Able to work with limited guidance in a team environment. • Prefer experience machining energetic materials. • Candidate must have 2+ years experience on 3 Axis CNC machines, 4 and 5 Axis a plus • Must have experience running manual machines and performing set-ups • Experience with OSP and/or Fanuc Controller preferred • Ability to read and interpret production specifications, production diagrams, assembly drawings, and technical specifications (English) • Ability to read and interpret blue prints • Expert in GD&amp;T • Experience in following written set-up instructions and /or performing unique set-ups • Demonstrated ability to resolve unforeseen, unique issues as they arise in machining a part(s) • Experience in complex measurements and advanced shop math calculations relative to tolerances, dimensions, tooling, and feeds and speeds • Ability to understand and work with knowledge of Lean manufacturing principles and disciplines • Perform other related work assignments special projects, and other duties as assigned by the Manufacturing Supervisor or Shift Lead • Experience fabricating component parts where set-ups are non-routine and tolerances are difficult to acquire and maintain • Expert on materials and machining processes • Able to work overtime and weekends as required • Able to work in a standing position for extended time periods • Able to lift or move a minimum of 35 -50 lbs. for up to 12 hours per day; pushing or pulling 35 -50+ lbs. occasionally throughout the work day Salary Range: $49,900.00 - $83,100.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Employees may be eligible for a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO/AA and Pay Transparency statement, please visit <a href="http://www.northropgrumman.com/EEO" target="_blank">http://www.northropgrumman.com/EEO</a>. U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

837 Full Time Jobs