field_remote_option

field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

field_job_salary_range

P/T Makerspace Support-3D printing Pay -$30-35hr Duration - Oct 15 th thru Dec 20 th , 2024 Locations - 6 Metrotech &amp; 325 Gold St, Brooklyn NY 11201 **** Onsite- Must be available to work 15-20 hours per week within the following time frames : Mon--Fri 5:30 pm-10:30 pm, Sat--Sun, 11:00 am-6:30 pm Our client in the education industry is seeking several P/T Makerspace Staff to work evening and weekend shifts at their makerspace facilities located at 6 Metrotech and 325 Gold Street. The Makerspace Support Associate will supervise and monitor the facilities operations of the General Engineering Open Laboratory and MakerSpace managed spaces including: ensuring compliance with all applicable policies including but not limited to safety, health and space usage; assisting in the maintenance and operation of the facilities and equipment; and reporting issues to the MakerSpace Managers and General Engineering Directors. These positions report to the Managing Director, MakerSpace DUTIES INCLUDE: <ul> <li> Supervise student workers and support operations during weeknights and weekends for the General Engineering Open Laboratory and MakerSpace managed spaces. </li><li> Enforce all policies regarding health, safety, and space usage in the Tandon School of Engineering. Adhere to standards as determined by OSHA, NIOSH, NYU Department of Research and Laboratory Safety and Environmental Safety and Health and the General Engineering and MakerSpace. </li><li> Work with the MakerSpace and General Engineering staff to identify, establish and maintain policies guiding the safe and efficient use of spaces. </li><li> Make recommendations for repairs and upgrades. </li><li> Coordinate with NYU cleaning contractors and building management as required. </li><li> Perform small maintenance and general housekeeping duties. </li><li> Enforce open hours as established by MakerSpace and General Engineering. </li><li> Ensure that spaces are left neat and tidy at the end of day and all doors are locked. </li><li> Must interact in a courteous and professional manner with Faculty, Students, Staff and Guests. </li><li> Coordinate with NYU Campus Security as needed. </li><li> Must be an excellent communicator. </li></ul><ul> <li> Qualifications Basic knowledge of 3D printing, laser cutting, and hand tool usage is required. Must be able to demonstrate clear, appropriate, and effective communication with a diverse audience including students and members of the public. Must be able to demonstrate a professional, courteous, and helpful demeanor. Prior experience in an educational environment is helpful. Must be available to work 15-20 hours per week within the following time frames: Mon--Fri 5:30 pm-10:30 pm, Sat--Sun, 11:00 am-6:30 pm </li></ul> What's in it for me? <ul> <li> Opportunity to work in a dynamic and innovative educational environment. </li><li> Gain experience in supervising and managing facilities operations. </li><li> Flexible work schedule with evening and weekend shifts. </li><li> Competitive pay rate </li><li> Potential for future opportunities within the organization. </li></ul> If this is a role that interests you and you'd like to learn more, click apply now. We look forward to speaking with you! About ManpowerGroup, Parent Company of: Manpower, Experis, Talent Solutions, and Jefferson Wells ManpowerGroup® (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands - Manpower, Experis, Talent Solutions, and Jefferson Wells - creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2023 ManpowerGroup was named one of the World's Most Ethical Companies for the 14th year - all confirming our position as the brand of choice for in-demand talent.

P/T Support Engineer-CNC

P/T Desktop Support-CNC

Summary Newlab applies transformative technology to things that matter. We are home to over 800 entrepreneurs, engineers, and inventors, solving the world's biggest challenges with leaders and experts across industries and cities. We support a range of frontier technologies, including robotics, A.I., computer vision, connected systems, and materials science. Newlab is seeking applicants for our Production Realization team in Detroit focused on bringing hardware products into the world. This person will report to the Director of Product Realization and work with other Product Realization staff to run the day to day of the prototyping shops serving Newlab members. This person is passionate about supporting innovation, always learning new fabrication skills and techniques, and is committed to creating shop spaces where all members feel invited and empowered to leverage the tools. Responsibilities <ul><li>Create an inclusive culture of creativity, learning, and safety.</li></ul><ul><li>Support Newlab community in product realization at Newlab Detroit. Expected work schedule will be from 9am - 5pm, Monday through Friday except where flexible scheduling is requested.</li><ul><li>Support the shop user community with advice, answers, technical suggestions, and other expertise specific to the machine shop.</li><li>Ability to support members in the workshop 1:1 when necessary.</li><li>Job based machine operation, for Newlab member community (for hire) </li></ul></ul><ul><li>Maintain awareness of members' use of the space. Build relationships with the shop user community to know what is happening in the shop spaces. </li><ul><li>Checking in with shop users, their needs and projects, and working with them and the rest of the Product Realization staff to ensure proper use of the shops.</li><li>Being able to guide members towards equipment and tooling offerings and the required training for access as projects warrant it. </li></ul></ul><ul><li>Maintain systems on a day to day basis and improve these systems as necessary.</li><ul><li>Cleaning and maintaining equipment and facilities within the CNC Machine Shop.</li><ul><li>Maintain tool library and back stock</li><li>Keeping and tracking equipment maintenance logs</li><li>Tracking part replacements and tool repairs</li><li>Keeping track of consumables, and restocking them as necessary</li><li>Keeping inventory of hand tools, replacing/tracking down tools as needed.</li><li>Tracking the state of the fume and dust extractors and vacuums. Replacing filters and vacuum bags as necessary. </li></ul><li>Working with other Product Realization staff to design, build, and implement things which upgrade the ergonomics of the facilities (i.e. workbenches, cubbies, displays/holders for tools</li></ul></ul> Qualifications and Skills <ul><li>Minimum 5 years of experience programming and operating manual and CNC machine tools including Hybrid mills &amp; lathes, VMCs (3 &amp; 5 axis), CNC lathes with live tooling. </li><li>Highly experienced with Conversational CNC (Trak &amp; Haas control systems preferred)</li><li>Well versed in CAD/CAM software (Autodesk Inventor, HSM, Solidworks, MasterCam, Rhino, Rhino CAM, Autodesk Fusion 360)</li><li>Experience with physical prototyping, digital design, design for manufacturing, or other production related processes.</li><li>Shop Training within a shared shop environment.</li><ul><li>Experience teaching machine training workshops within areas of expertise.</li></ul></ul><ul><li>Work Style</li><ul><li>Highly effective communicator and collaborative team player.</li><li>Embrace flexibility and adaptability as the team learns through prototyping and playtesting, adjusting project plans as needed.</li><li>Demonstrates a desire to constantly improve and adapt to new technologies.</li><li>Independent with ability to follow along with instruction manuals, exploded view drawings, and troubleshoot basic technical issues</li><li>Interest in learning about various tools and their uses outside their expertise.</li><li>Highly organized, task oriented</li></ul></ul> Nice to haves <ul><li>Familiarity with spaces that support physical prototyping, research, and innovation.</li><li>Experience with the operations of shared-equipment and machine training programs.</li><li>Interested in expanding skills and experience beyond their designated area of expertise.</li><li>Structural or Mechanical Engineering degree or training.</li></ul> We are an EEO employer.

Product Realization CNC Machining Specialist, Detroit

Loc Performance Products, LLC provides full services for complex mechanical products, fabricated structures and systems that range from complete design services to prototype manufacturing, testing, production launch, full rate production and product service and sustainment. Loc provides quality products and services at affordable prices through a lean organizational structure and four facilities, three in Michigan that span 910,000 square feet, and one in Ohio, that span 800,000+ square feet. The Plymouth, MI facility serves as corporate headquarters and specializes in suspension, driveline, and track systems. The Lansing and Lapeer Michigan based facilities specialize in fabrications and armor product solutions. Loc's St. Mary's, Ohio facility manufactures rubber track products for agricultural, construction, and defense industries. Visit our website at <a href="http://www.locperformance.com" target="_blank">http://www.locperformance.com</a> FLSA Status: Non-Exempt Approved Date: 9/6/2024 Approved By: Juston Boland, Plant Manager Job Title: CNC Lathe Machinist Department: Production Summary Verifies dimensions using gauges, micrometers, calipers, and various measuring devices by performing the following duties. Essential Duties and Responsibilities include the following. Other duties may be assigned. <ul> <li>Familiar with working on VTL's with Fanuc controls for Mill/Lathe machining centers.</li> <li>Responsible for reporting malfunctions, replacing worn tools and cleaning debris from machine.</li> <li>Inspect manufactured components for conformance to specifications.</li> <li>Must have the ability to set up and operate vertical turning lathes on 96-inch table</li> <li>Has knowledge of running 5 Axis machine</li> <li>Familiar with operating lifting devices for movement of materials and other equipment as needed.</li> <li>Plans machining by studying work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&amp;T).</li> <li>Programs CNC machines by entering instructions, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs.</li> <li>Sets-up CNC machines by installing and adjusting three- and four-jaw chucks, tools, attachments, collets, bushings, cams, gears, stops, and stock pushers; indicating vices.</li> <li>Verifies settings by measuring positions, first-run part, and sample workpieces, adhering to international standards.</li> <li>Maintains specifications by observing drilling, grooving, and cutting, including turning, facing, knurling and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes.</li> <li>Maintains safe operations by adhering to safety procedures and regulations.</li> <li>Maintains equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs.</li> <li>Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs.</li> <li>Documents actions by completing production and quality logs.</li></ul> Competencies To perform the job successfully, an individual will need to perform the following competencies. Quantity of Work The quantity of work produced and the promptness with which it is completed. Quality of Work The ability displayed and accuracy of work produced, meeting company standards, and requiring little to no rework. Judgement/Knowledge of Job Knowledge of job, techniques, skills, equipment, procedures, materials, etc. Attendance/Dependability Punctuality and attendance. Teamwork/ Attitude Willingness and cooperativeness with co-workers and supervisors; ability to accept constructive criticism. Initiative/Independence The degree to which an employee searches out new tasks and expands their ability to perform assigned tasks without direct supervision. Adherence to Policy Follow quality environmental policies and have knowledge of AS9100 and IS14001. Adherence to Safety Follow safety procedures, security protocol, and wear proper PPE. Education and/or Experience High school diploma or G.E.D. equivalent, and at least five years CNC Machining experience. Mathematical Skills Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel and reach with hands and arms. The employee may occasionally lift up to 50 pounds. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Loc Performance is an Equal Employment Opportunity (EEO) employer. It is the policy of the Company to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information.

CNC Lathe Machinist

The College of Southern Nevada appreciates your interest in employment at our growing institution. We want your application process to go smoothly and quickly. We ask that you keep in mind the following when completing your application: <ul><li>Once you start the application process you cannot save your work. Please ensure you have all required attachment(s) available to complete your application before you begin the process.</li><li>Required attachments are listed below on the posting. Your application will not be considered without the required attachments.</li><li>Please note that applications must be submitted prior to the close of the recruitment. Once a recruitment has closed, applications will no longer be accepted.</li></ul>If you are unable to attach the required documents to your online application or need assistance regarding the application process, please contact the Talent Acquisition team within Human Resources via email at <a href="mailto:hr.recruitment@csn.edu" target="_blank">hr.recruitment@csn.edu</a> or call (702) 651-5800 to be directed to the appropriate Recruiter. Job Description DWED (Department of Workforce and Economic Development) and the Applied Technology Department at the College of Southern Nevada invite applications for a Part-Time Advanced Manufacturing - Machining Instructor within the Advanced Manufacturing Program beginning immediately. The successful candidate will demonstrate industry and teaching experience. Responsibilities The Advanced CNC Manufacturing Instructor will develop and instruct lab and lecture classes and develop student learning outcomes and course descriptions. This includes organizing instruction towards achieving student learning objectives; selecting textbooks and another curriculum; conferring with students; evaluating student mastery and providing a safe and positive classroom and laboratory environment. Primary teaching areas are in Advanced Manufacturing Technology topics such as: <ul><li>Metrology</li><li>Geometric Dimensioning and Tolerancing (GD&amp;T)</li><li>Machining</li><li>CNC Milling and Turning</li><li>CADD and Additive Manufacturing (Preferred)</li><li>Automation with PLCs and Robotics (Preferred)</li><li>Related engineering technology and technical physics classes</li></ul>Other duties will include: Program assessment and curriculum development; student mentoring; assess student learning and progress, scholarship of teaching and learning; maintaining accurate student records, upholding professional and ethical standards, participate in professional development activities; outreach to the college, community, and profession; supervising student assistants and staff as necessary; collaborate with other instructors and staff and duties as assigned by the Director of Advanced Manufacturing. The candidate is expected to participate in student recruitment activities. The candidate will participate and assist the team to maintain and develop strong industry and community partnerships, within and outside of the program advisory committee. They will also commit to continuing their professional development as an educator through attendance at industry conferences and membership in professional associations. Minimum Qualifications <ul><li>Associate's degree in the following: Industrial or Mechanical Technology; Mechanical Engineering (Degrees in related fields are also acceptable) OR five (5) years of industrial experience in a machining environment AND</li><li>A minimum of 1 year of work experience in a machining environment using CNC Mill/Lathe Machines</li><li>Teaching experience in Career and Technical Education (Preferred)</li></ul>Preferred Qualifications In addition to the minimum requirements, the department encourages applicants with the following credentials to apply: <ul><li>Bachelor's degree in education, adult education, or a related field</li><li>Experience teaching IET programs, preferably in a CTE setting</li><li>Experience teaching ABE, including ESL, math, and reading</li><li>10 or more years of work experience in Manufacturing or Industrial Technologies</li><li>5 or more years of work experience in Machining</li><li>1 or more years of experience teaching in Career and Technical Education</li><li>Leadership/ Management Experience</li><li>Industrial certifications such as NIMS, NC3, etc.</li><li>Experience teaching online/hybrid classes, Canvas</li><li>Experience creating a college curriculum</li><li>Experience developing an industrial lab in a college setting, such as a Machining, Manufacturing, or Mechanical Technologies Lab</li><li>Experience working in diverse multicultural situations</li></ul>Starting Pay $40.00 per hour Exempt Yes Full-Time Equivalent 48.8% Required Attachment(s) To be considered for this position, please upload the following documents to your application: <ul><li>Resume</li><li>Cover Letter</li><li>Academic Transcripts</li><li>Contact information for three professional references</li></ul>Applicants should fully describe their qualifications and experience with specific reference to each of the minimum and preferred qualifications. The search committee will use this information during the initial review of application materials. NSHE - INTERNAL APPLICANTS PLEASE NOTE CSN employees or employees within the Nevada System of Higher Education (NSHE) MUST use the "Find Jobs" process within Workday to find and apply for jobs at CSN and other NSHE Institutions. Once you log into Workday, type "Find Jobs" in the search box which will navigate to the internal job posting site. Locate this specific job posting by typing the requisition number in the search box. If you complete an application outside of the internal application process and apply as an external candidate, your application will no longer be considered at the time of minimum qualification review. In order to prevent the disqualification of your application, you will need to reapply as an internal candidate before 11:59 pm the day prior to the position close date. For more details on this position, please visit our website: My Career at CSN CSN is an Equal Employment Opportunity/Affirmative Action institution. For more information, visit <a href="http://www.csn.edu/nondiscrimination" target="_blank">http://www.csn.edu/nondiscrimination</a>. Posting Close Date 06/30/2025 Note to Applicant Applicants should fully describe their qualifications and experience with specific reference to each of the minimum and preferred qualifications. The search committee will use this information during the initial review of application materials. All document(s) must be received by 11:59 p.m. the day prior to the closing date posted on the job announcement. This position may require that a criminal background check be conducted on the candidate(s) selected for hire. As part of the hiring process, applicants for positions in the Nevada System of Higher Education may be required to demonstrate the ability to perform job-related tasks. Schedules are subject to change based on organizational needs. CSN is responsive to serving the educational needs of a diverse and ever-changing community. CSN employs only U.S. citizens and aliens authorized to work in the U.S. CSN does not sponsor aliens applying for faculty, professional staff, or management positions (H-1B Visas) in the absence of exceptional circumstances as defined by the USCIS.

Part - Time Instructor, Advanced Manufacturing - CNC Machining - FY 2025

McKenzie Valve &amp; Machining Come join a team where People make the difference! As a part of Marmon Holdings, Inc., a highly decentralized organization, we rely heavily on people with the aptitude, attitude, and entrepreneurial spirit to drive our success, and we're committed to attracting and retaining top talent. "#LI-DNI" The company is looking for a safety-conscious candidate that is willing to learn and grow with the business. This is a role where you will work in a TEAM environment where safety always comes first. Job Requirements: <ul><li>Follow the WPS, as specified on the applicable job card, weld plates together using FCAW and GTAW</li><li>Locate material, verify grade, size, and quantity by visual inspection and physically measuring material</li><li>Troubleshoot routine process problems</li><li>Maintain work area in an organized, safe, and clean manner</li><li>Assist in other areas of the facility as needed</li><li>Posses Mechanical Aptitude</li><li>Posses basic reading, writing, and mathematical skills</li><li>Must be available to work any shift</li><li>Able to work within a teamwork environment with regular and predictable attendance</li><li>Able to pass all pre-employment requirements</li></ul>Preferred Skills: <ul><li>Ability to demonstrate welding skills in the 1,2 &amp; 3 F positions and 1,2 &amp; 3 G positions using GTAW and FCAW</li><li>Ability to safely operate a lift truck up to 40,000-pound lift capacity</li><li>Ability to safely operate hand tools such as grinder, hammer, wrench, and pry bar</li><li>Basic reading, writing, and mathematics skills</li><li>Ability to read blueprints, drawings, and standard measurements</li><li>Previous work experience in an industrial environment</li></ul>What We Offer: Our generous benefits package includes <ul><li>Benefits on Day 1</li><li>Medical/Dental/Vision</li><li>Health Savings Account/Flexible Spending Account</li><li>Vacation Benefits</li><li>401k with generous company match and additional employer annual contribution</li></ul> Company Paid Benefits: <ul><li>Short Term Disability</li><li>Long Term Disability</li><li>Life Insurance</li><li>4 weeks of Paid Parental Leave</li></ul>Don't worry if you think that you do not meet all the qualifications. The tools, technology, and methodologies we use are constantly changing and we value talent and interest over specific experience. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to <a href="mailto:careers@marmon.com" target="_blank">careers@marmon.com</a>, and please be sure to include the title and the location of the position for which you are applying.

CNC Burner/Fitter/Welder

Job Description We are looking for a talented Machining Engineer - Senior to join our team specializing in Manufacturing for our Power Systems Business in Seymour, IN. Job Summary: Plans, designs, purchases, and implements machining processes and equipment in an industrial plant. In this role, you will make an impact in the following ways: <ul> <li>Collaborates: You'll build partnerships and work collaboratively with others to achieve shared objectives. This involves fostering a team-oriented environment and leveraging the strengths of different team members. </li></ul> <ul> <li>Communicates Effectively: You'll develop and deliver multi-mode communications that are clear and tailored to the unique needs of different audiences. This ensures that your message is understood and well-received by all stakeholders. </li></ul> <ul> <li>Health and Safety Fundamentals: You'll champion proactive health and safety behaviors, identifying and participating in actions to improve health and safety. This helps build an interdependent culture and contributes to an injury-free workplace. </li></ul> <ul> <li>Drawing Interpretation: You'll integrate product design and manufacturing equipment engineering drawings to develop optimal manufacturing processes. This ensures that the manufacturing process meets product design specifications. </li></ul> <ul> <li>Equipment/Capital Procurement: You'll select manufacturing equipment that meets Cummins specifications and project needs. This involves evaluating equipment options and making informed decisions to support project goals. </li></ul> <ul> <li>Manufacturing Knowledge: You'll demonstrate knowledge of manufacturing by implementing changes in processes, equipment, and applications. This contributes to continuous improvement and meets the function's needs. </li></ul> <ul> <li>Process Documentation: You'll produce written manufacturing procedures in proper sequence, ensuring that all approved stakeholders follow them correctly. This establishes continuity in processes and standardization. </li></ul> <ul> <li>Values Differences: You'll recognize and appreciate the value that different perspectives and cultures bring to an organization. This helps create an inclusive environment where diverse ideas and viewpoints are valued. </li></ul>Responsibilities To be successful in this role, you will need the following: <ul><li>Parts and Tools Determination: Identify the necessary parts and tools to achieve manufacturing goals, such as setup reduction and changeovers, according to product specifications. </li></ul><ul><li>Problem Identification and Solution Recommendation: Collaborate with engineering to identify product and performance issues and recommend solutions or enhancements. </li></ul><ul><li>Technical Product and System Development: Design, develop, implement, and analyze technical products and systems to meet manufacturing goals. </li></ul><ul><li>Equipment Engineering Design Evaluation: Perform evaluations of equipment engineering designs, document results, and recommend alterations to improve product quality and procedures. </li></ul><ul><li>Coaching and Mentoring: Coach and mentor less experienced team members to enhance their skills and knowledge. </li></ul><ul><li>Continuous Improvement: Utilize continuous improvement tools and work cross-functionally to improve equipment availability and capability. </li></ul><ul><li>Cross-Functional Collaboration: Work with various departments to ensure seamless integration and implementation of manufacturing processes. </li></ul><ul><li>Documentation and Analysis: Document and analyze technical evaluations and development processes to ensure quality and efficiency. </li></ul>Education, Licenses, Certifications: <ul><li>College, university, or degree in STEM (Science, Technology, Engineering, Math) or related field, or equivalent experience required. </li></ul><ul><li>This position may require licensing for compliance with export controls or sanctions regulations. </li></ul>Experience: Intermediate level of relevant work experience required. Qualifications The Seymour Machining Center (SMC) produces all QSK95 and HSK78 cylinder blocks for the assembly line at Seymour Engine Plant. It is the sole facility for machining the largest displacement engine block in Cummins' product portfolio. The facility consists of four CNC machines, a production parts washer, a large CMM and several ancillary operations. Additional responsibilities, qualifications &amp; skills for this role may include but are not limited to: - Oversight or troubleshooting for other machining processes within the SEP campus (outside of SMC) &amp; providing shift vacation coverage as required - Ability to lead &amp; direct work to meet production targets and to ensure continuity across shifts - Significant experience of CNC machining and programming is required. This must include being able to operate, program and troubleshoot equipment faults/failures and the ability to write CNC programs from technical part drawings. - Must have working knowledge of Geometric Design &amp; Tolerancing (GD&amp;T). - Experience with Siemens 840D controls, Fanuc controls, and Atlas Copco torque units is beneficial. - Experience leading cross functional teams with Operations, Quality, HSE, and Materials working on plant initiatives, improvements, and goals is required. - Ability to supervise/coach/mentor Machining Engineers, AMA's, Interns/Co-ops, School to Work students, while having direct machining support responsibilities. - Must be a self-starter, capable of identifying, leading, and working on projects as well as assigned tasks/projects on own motivation. This role is an onsite position with some flexibility at the discretion of the positions manager. Compensation and Benefits Base Salary 84,800.00 - 127,200.00 USD Please note that the salary range provided is a good faith estimate on the applicable range. The final salary offer will be determined after considering relevant factors, including a candidate's qualifications and experience, where appropriate. Additional benefits vary between locations and include options such as our 401(k) Retirement Savings Plan, Cash Balance Pension Plan, Medical/Dental/Life Insurance, Health Savings Account, Domestic Partners Coverage and a full complement of personal and professional benefits. Cummins and E-verify At Cummins, we are an equal opportunity and affirmative action employer dedicated to diversity in the workplace. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, color, disability, national origin, age, religion, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law. Cummins validates right to work using E-Verify. Cummins will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each new employee's Form I-9 to confirm work authorization. About Us At Cummins, we are an equal opportunity and affirmative action employer dedicated to diversity in the workplace. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, color, disability, national origin, age, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law. Visit EEOC.gov to know your rights on workplace discrimination.

Machining Engineer - Senior

Overview Location: Edmonton, Alberta Position: Regular / Full Time / Day Shift &amp; Night Shift Available (Training on Day Shift) Positions Available: 2 Waiward is a respected construction and maintenance service provider that operates one of Canada's largest fabrication shops based out of Edmonton, Alberta. Our mission is To Be Your Trusted Partner which ensures we act with integrity in all that we do. Through planned growth and development, we have kept our commitment to provide our customers with an unsurpassed level of service. Waiward's historical and future success is grounded in our collective commitment to our core values. At Waiward, we believe a diverse and inclusive workplace is the key to unlocking the full potential of our people. It is essential to build a team that represents the communities and clients we are serving. We attract, hire, and develop people of all backgrounds and ensure fairness and inclusion within our hiring processes. We believe in investing in people based on their expertise, capabilities, aspirations, and performance despite their race, religion, gender identity, sexual orientation, and beliefs. As a leader in our industry, we believe diversity and inclusion strengthen our team and are committed to making sustainable progress in our company and the communities and clients we serve. With the support of our leadership team and peers, our people are encouraged to share their perspectives. Job Purpose The CNC/PC Based Operators are responsible for operating CNC/PC machines to cut and produce the plates, angles, and beams for required jobs. Responsibilities <ul><li>Display a commitment to Waiward's incident-free vision, values, and culture.</li><li>Perform pre-use inspections on machine before using.</li><li>Trouble shoot problems with CNC/PC based machine being operated.</li><li>Mark pieces appropriately and stack accordingly with the use of overhead crane.</li><li>Request material for machine as needed.</li><li>Maintain accurate paperwork (maintenance book filled out and accurate heat numbers).</li><li>Run CNC/PC based machine assigned.</li><li>Complete housekeeping tasks.</li><li>Attend daily toolbox meetings.</li><li>Follow work schedules.</li><li>Complete tasks with minimal NCR's.</li><li>Properly and consistently follow and document established procedures.</li><li>Read, understand and comply with Waiward's safety policy, safe work practices, procedures and rules.</li><li>Ensure wearing appropriate personal protective equipment at all times.</li><li>Report personal injuries, no matter how minor, and obtain medical attention as required.</li><li>May perform other related duties as assigned.</li></ul>Qualifications <ul><li>Minimum high school diploma required.</li><li>Experience within a steel industry is considered an asset.</li><li>Previous skill with using a steel cutting saw is also considered an asset.</li><li>Demonstrates a solid understanding of reading blue prints both in metric and imperial.</li><li>Knowledge of computer based software such as Peddimat.</li><li>Knowledge of programming beams, channels, HSS, and angles.</li><li>Ability to compare drawings with CamData to ensure work is correct.</li><li>Team player, friendly and have a professional attitude.</li><li>Exceptional organizational and multi-tasking skills that are complemented by effective interpersonal, oral and written communication.</li><li>Basic and Advanced Rigging Course an asset.</li><li>Fire Extinguisher Training an asset.</li><li>FLHA Training an asset;</li><li>Overhead Crane Operator required (internally delivered).</li><li>WHMIS</li></ul> Working Conditions The incumbent is required to work in a fabrication shop with moderate noise. Physical Requirements The incumbent is required to stand and sit for extended periods of time and will require good physical attributes for walking on uneven ground, climbing, confined space entry, limited lifting, and sitting. *Please note that only qualified candidates will be contacted. Waiward is an equal opportunity employer.

CNC/PC Based Operator

As a CNC Machinist at NMG Aerospace, you are responsible for set up of machines and machining of complex parts, which includes the set-up of tooling and fixtures on machines using engineering set up drawings. You will also establish origins of machine to fixture and inspect and verifying parts for tolerance. Come join our NMG family and be part of a team of individuals who enjoy excellent health and retirement benefits, competitive pay, a comfortable work environment, and co-workers who enjoy working and learning together as a team. Apply Today! Shift Time for this position are 6:00 am - 3:30 pm Monday - Thursday and 6:00 am - 10:00 am on Friday Minimum Requirements: <ul><li>4+ years of CNC Machining experience in a regulated industry, Aerospace preferred.</li><li>Demonstrated ability to read blueprints.</li></ul>Job Summary Set up machines and machining of complex parts with close tolerances. Requires the ability to machine parts using CNC Lathe and/or CNC Mill with little or no supervision. Essential Job Functions <ul><li>Set up tooling and fixtures on machines using engineering set up drawings</li><li>Establish origins of machine to fixture and machining of first part to blueprint requirements</li><li>Inspect and verify part</li><li>Run production parts after set up</li><li>Establish production standards and optimize production for maximum output while maintaining quality and blueprint requirements</li><li>Perform in process inspection and benching of part during machine cycle</li><li>Complete all inspection data, SPC charts and certified operator documentation</li><li>Compliance with safety standards and guidelines</li><li>Maintain good housekeeping during all phases of production</li><li>Make accurate and detailed transactions of work done in ERP software.</li></ul>Additional Duties <ul><li>Provide support for Lean manufacturing and continuous improvement initiatives, companywide.</li><li>Other duties, reporting, special assignments or projects as needed and assigned.</li></ul>Qualifications <ul><li>4-7 years CNC Machining experience in a regulated industry, aerospace preferred</li><li>Knowledge of set-up and operation of CNC machines with excellent attention to detail</li><li>Demonstrated ability to read blueprints</li><li>Physical Requirement include standing for long periods of time, and lifting up to 50 lbs.</li><li>Must be willing to submit to and satisfactorily pass any pre-employment screening required for employment with NMG Aerospace (i.e. drug screen, background check, eye exam, hearing exam, etc.) and any subsequent testing required for the position during employment.</li><li>Must be able to remain in a stationary position 50 percent of the time.</li><li>The person in this position needs to occasionally move about inside the office or shop floor to access work supplies, tools, machinery, etc.</li><li>This position may require physical activity to include handling of objects up to 40 pounds. Anything above this weight limit will require the use of the proper equipment outlined during OTJ and workplace safety training. Physical activity may also include long periods of standing, sitting, and walking.</li></ul>Education <ul><li>High school diploma or equivalent</li><li>Completed apprenticeship program; journeymen certification preferred</li></ul>In addition to competitive wages, NMG is proud to offer a retirement saving plan with company matching opportunity, excellent health and wellness benefits including a $350 annual wellness allowance for assistance with personal health and fitness goals, can earn up to 4 weeks paid time off, on the job training, education assistance and a variety of other supportive programs to meet our team's member's needs. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

CNC Machinist (Lathes) - 1st Shift- Aerospace Manufacturing

Piedmont Plastics is the leading independent and privately held distributor of performance plastics in North America. Since first opening our doors in 1968 with just one location and five employees, Piedmont has grown to over 50 locations across North America, employing over 650 individuals. At Piedmont Plastics, we are a family, and believe our people are the foundation of our success. Our company culture is engrained in every facet of our business, and we are devoted to maintaining an enjoyable, open, and supportive atmosphere across the organization. We care about and respect one another by demonstrating integrity in everything that we do and take pride in giving our employees the ability to thrive in a growth-oriented environment. Our diverse workforce brings passion to the mission of Piedmont Plastics every day - to be best-in-class in the distribution of performance plastics. Our materials can be found in every industry market segment, and we are concentrated on satisfying our customers with expert product knowledge and a solutions-focused mentality. Join a team that works together in a collaborative and winning environment to continuously exceed customers' expectations. After all, Piedmont Plastics is "where solutions take shape!". Piedmont Plastics is looking for an exceptional CNC/Router Operator to add to its Greenville team. If you are a highly motivated, self-starting, warehouse professional with a strong work ethic, a solid work history along with previous warehouse experience, we have a home for you. We believe hard work and results deserve the utmost rewards, and we offer an excellent compensation package with outstanding employee benefits. In this position you will be required to: <ul><li>Set-up and manage CNC and routers to perform different jobs as per the print/drawing instructions and programming supplied</li><li>Translate engineering drawings and requirements into dimensions for production</li><li>Select bit or machine tool according to type of cut specified on work order and safely attaches the bit/tool to the router or CNC machine</li><li>Establish cutting parameters to achieve maximum quality</li><li>Oversee machines while they execute the tasks and makes necessary changes to produce improved results</li><li>Check machinery daily to guarantee functionality</li><li>Communicate issues that may arise in the creation of a piece</li><li>Maintain a safe working area and follows established safe work practices</li><li>Use computer to enter records, track material and control inventory</li><li>Pull stock and restock from/to storage locations; removes cut stock from machine and maintains production count</li></ul> IF YOU HAVE: <ul><li>At least 2 years experience of working with CNC equipment</li><li>Ability to read and interpret technical documents such as blueprints</li><li>The ability to work with micrometers and calipers</li></ul> We offer: <ul><li>Industry leading wages</li><li>A generous benefits package including medical, dental, vision, 401k matching savings plan and paid time off</li><li>An opportunity to work in a growing industry</li></ul> Please use the Apply Now button to apply for this position With the large amount of applications expected to be received for this position, only applicants that meet the minimum hiring criteria will be considered for this position. No Phone calls from applicants or staffing firms, please. Piedmont Plastics is an equal opportunity affirmative action employer and administers all personnel practices without regard to race, color, religion, sex, age, national origin, disability, sexual orientation, gender identity or expression, marital status, veteran status, genetics or any other category protected under applicable law. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

957 Jobs