field_remote_option

field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

field_job_salary_range

#ChangeMakers Ready to make an impact? We develop, manufacture, and supply dental implants, clear aligners, instruments, CADCAM prosthetics and biomaterials for use in esthetic dentistry, tooth replacement and restoration solutions or to prevent tooth loss. We empower our employees to perform and make an impact, to question the status quo, to drive change, to stay ahead of the competition. From the first Dental Implant in 1974 to the latest Digital Solution - we do things differently than others We deliver innovation based on evidence. This is part of our employer culture as well as an exceptional team spirit that truly encourages diversity and a powerful "can-do" attitude. #WeChangeDentistry every day. Be part of it. Position Summary: The CNC Machinist will possess expertise in setting up and operating CNC machines, particularly those equipped with Heidenhain and Siemens control systems. Attention to detail, commitment to quality, effective communication skills, and a strong dedication to workplace safety. Essential Functions and Duties: This position is responsible for, but not limited to, the following: CNC Machine Setup: <ul><li><ul><li> Proficiently set up and operate CNC machines, ensuring accuracy and efficiency in accordance with specified guidelines. </li><li> Experience with Heidenhain or Siemens control systems. </li></ul></li></ul> Quality Assurance: <ul><li><ul><li> Maintain a keen eye for detail to uphold high-quality standards during machine setup and operation. </li><li> Adhere to quality control procedures to ensure precision and consistency in manufactured parts. </li></ul></li></ul> Communication Skills: <ul><li><ul><li> Collaborate effectively with colleagues at all levels to convey technical information, share insights, and address challenges. </li><li> Foster a positive team environment through clear and concise communication. </li></ul></li></ul> Procedural Adherence: <ul><li><ul><li> Strictly adhere to established procedures and protocols for CNC machine setup, following best practices to achieve optimal results. </li><li> Document and maintain records of machine settings and adjustments. </li></ul></li></ul> Problem-Solving and Analytical Skills: <ul><li><ul><li> Demonstrate a strong analytical aptitude to identify, troubleshoot, and resolve issues that may arise during machine setup or operation. </li><li> Contribute to continuous improvement initiatives to enhance overall efficiency. </li></ul></li></ul> Workplace Safety: <ul><li><ul><li> Prioritize and adhere to all safety protocols and guidelines in the workplace. </li><li> Report any safety concerns or incidents promptly and contribute to a culture of continuous improvement in safety practices. </li><li> Participate in safety training programs and promote a safe working environment for yourself and your colleagues. </li></ul></li></ul> Non-essential Functions and Duties: Other duties as assigned by a supervisor or manager Minimum Qualifications: <ul><li> Technical Trade School for CNC technician or 5+ years related experience as a CNC Machinist or Technician </li><li> 5+ years of experience as a CNC Machinist </li></ul> Preferred Qualifications: <ul><li> Experience in operating and managing CNC-controlled machining production, encompassing milling, turning, and grinding processes </li><li> Assertiveness and resilience in handling various aspects of the role </li><li> Proficient problem-solving and change management skills </li><li> Capability to follow procedures diligently and accurately </li><li> Strong communication skills with the ability to interact effectively across all levels of the organization </li><li> Experience in working with CNC machines with Heidenhain or Siemens control systems </li><li> Attention to detail and commitment to delivering high-quality results </li><li> Previous experience in the medical industry is a significant advantage </li></ul> Additional Information: Whether you're looking to build your career, improve your health, or brighten your SMILE, we offer generous benefits to help you achieve your goals. • Very Competitive total compensation plans • A 401(K) plan to help you plan for your future with an employer match • Great health, dental and vision insurance packages to fit your needs to ensure you're happy and healthy. Straumann contributes a healthy portion towards employees' premium. • Generous PTO allowance - plenty of time to recharge those batteries! Please understand that we do not need external support by recruiting agencies and consultants to fill this vacancy. Thank you for respecting this. Videos To Watch <a href="https://youtu.be/3lq5BLAvIdQ" target="_blank">https://youtu.be/3lq5BLAvIdQ</a> All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or disability. Employment Type: Full Time Alternative Locations: United States : Mansfield (TX) Travel Percentage: 0 - 10% Requisition ID: 15565

CNC Machinist

Job Title: CNC Machine Operator (Lathe) Division: Precision Pulley &amp; Idler (PPI) FLSA: Non-Exempt Grade: 3 Job Status: Full Time Travel Required: 0% Revision Date: January, 2023 Reports To: Production Supervisor PURPOSE OF POSITION To perform the set up and operation of a CNC Lathe ESSENTIAL DUTIES AND RESPONSIBILITIES The following duties are normal for this position. These are not to be construed as exclusive or all inclusive. Other duties may be required and assigned. More specifically, the employee owner will: <ul><li>Perform setup and operation of CNC (or manual) Lathe - Typical operations include: ID and OD turning</li><li>Produce quality parts that fall within the supplied, or standard, tolerances</li><li>Be able to use measuring equipment to validate and ensure part quality</li><li>Read and follow work orders, including Production Schedules and Manufacturing Orders</li><li>Achieve a throughput level that is at or above expectation</li><li>Be able to run a manual lathe</li><li>Occasionally run multiple machines, simultaneously</li><li>Work with a good attitude and willingness to be flexible with daily demands</li><li>Perform all activities in a safe manner, per job specific training and general safety rules</li><li>Be able to distinguish the size difference of the tube stock, shafting, slugs, and plates</li><li>Be able to perform programming sequence to create new programs</li><li>Be able to change out tooling - Including: cutting inserts, tool holders, drills, etc.</li><li>Perform required preventative maintenance</li><li>Maintain knowledge on differences between pulleys and pulley subcomponents</li><li>Willingness to work in other areas/functions within the plant</li><li>Regular, consistent attendance.</li><li>Perform routine maintenance and cleaning</li><li>Communicate positively with supervisors, fellow workers, and other internal customers</li></ul>QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. <ul><li>Ability to read and understand blueprints and job orders.</li><li>Basic computer skills.</li><li>Know how to read manual and digital micrometers, bore gauges, dial calipers, tape measure, depth micrometer and inside micrometer.</li><li>Math and mechanical abilities.</li><li>Concentration required when programming.</li><li>Regular, consistent attendance.</li></ul>EDUCATION - EXPERIENCE - COMPUTER SKILLS <ul><li>High school diploma or a general education degree (GED); or</li><li>One to three months related experience and/or training; or</li><li>Equivalent combination of education and experience.</li></ul>TRAINING - CERTIFICATIONS - LICENSES <ul><li>Continually participate in additional training related to the job.</li></ul>COMPETENCIES To perform this position successfully, individual should demonstrate the following work competencies: <ul><li>Safety and Security - Observes safety and security procedures; Uses equipment properly.</li><li>Problem Solving - Identifies and resolves issues in a timely manner.</li><li>Communication Skills - Speaks clearly, listens and receives clarification, respond to questions.</li><li>Dependability - Follows instructions, responds to management direction, and takes responsibility.</li><li>Quality Assurance - Demonstrates accuracy and thoroughness.</li><li>Ethics/Professionalism - Treats people with respect; Works ethically and with integrity.</li><li>Organizational Support - Follows policies and procedures.</li><li>Judgment - Exhibits sound and accurate judgment.</li></ul>PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the employee: <ul><li>Must be able to frequently stoop/bend.</li><li>Must be able to regularly use hands and arms.</li><li>Must be able to regularly stand and walk.</li><li>Must be able to occasionally lift and/or move up to 45 pounds with hoist available.</li><li>Must be able to frequently lift and/or move up to 25 pounds.</li><li>Specific vision abilities required by this job include close, distance, color, and peripheral vision.</li><li>Specific hearing abilities required for this job include the ability to hear equipment alarms and the ability to hear instructions from others.</li></ul>ENVIRONMENTAL ADAPTABILITY <ul><li>The noise level in the work environment is usually loud.</li><li>While performing the duties of the job, the employee may occasionally be exposed to heat and humidity (non-weather) and industrial equipment.</li><li>The employee is frequently exposed to moderate temperature, humidity in the work place and industrial equipment.</li><li>The employee is occasionally exposed to coolant and hot metal chips.</li><li>Steel-toe safety shoes, safety glasses, hearing protection, when necessary, protective gloves and welding equipment on occasion.</li></ul>Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

CNC Machinist (Lathe Operator)

Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufactures of precision machined parts in the United States. Our mission is to help manufactures maintain a competitive advantage in the world economy by improving productivity. Trident Machine Tools, a division of the Morris Group, Inc., is one of the nation's largest distributors of Haas F1 CNC machine tools, work holding, automation systems and robotics. Summary of Responsibility: The team is looking for an upbeat and passionate CNC Manufacturing Engineer to support our customers and internal sales team. Working alongside the sales team, this role will take an innovative, hands-on approach to CNC manufacturing, while designing, owning, and implementing custom manufacturing solutions for our customers. This role will have direct responsibility for developing solutions, training, and supporting our team and our customers technical needs in the CNC arena. With a strong emphasis on automated solutions, robotics, and training, you will define and build the organizational support needed to grow new and existing revenue streams. What You Will Contribute: <ul><li>Part programming of CNC Machine Tools, process development, and customer training.</li><li>Conducting pre-sale activities and reviews including customer visits, evaluation of opportunities, machine assessment and recommendations, and part processing recommendations</li><li>Drafting accurate cost estimates, writing engineering reports, and interpreting plans and specifications </li><li>Programming and setting up CNC lathes, CNC vertical or horizontal mills with automation and robotics.</li><li>Developing/implementing customer demonstrations and training users in the safe set up and operation of CNC machining centers, lathes and robots.</li><li>Possessing and maintaining an in-depth technical knowledge of product lines represented by the company. </li></ul>Other Functions: <ul><li>Perform related duties as required</li></ul> The duties listed above are intended only as illustration of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar or a logical assignment to the position. Qualifications &amp; Competencies: <ul><li>Strong hands-on machining background with at least 5 years of demonstrated ability in process development and programming of CNC machines.</li><li>Haas experience is preferred, but not required.</li><li>Confirmed working knowledge of MasterCam and/or AutoDesk software is preferred.</li><li>Excellent customer service and effective interpersonal skills required.</li><li>Tooling and ancillary machining equipment knowledge is a must.</li><li>Frequent travel throughout our regional territory; some overnight travel required.</li></ul>What's in it for You: We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work: <ul><li>Competitive starting salary</li><li>Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance</li><li>Paid Time Off, starting with 23 paid days off in your first year.</li><li>10 Company Paid Holidays</li><li>401(k) retirement plan with company contribution</li><li>Tuition reimbursement</li><li>Employee appreciation events and perks</li><li>Employee Assistance Program</li></ul>Mental and physical requirements: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to optimally perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. <ul><li>Highly mobile, able to access all areas of the premises.</li><li>Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities and projects.</li><li>Able to perform bending, twisting, stooping, reaching and lifting of moderate to heavyweight material up to 50 lbs.</li><li>Is frequently required to use hands to finger and reach with hands and arms.</li><li>Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus.</li><li>Ability to keep their composure with the public and co-workers in everyday, stressful situations.</li></ul>Morris Group, Inc., including all operating subsidiaries, is an Equal Opportunity Employer-M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity, or any other protected class. Job Requisition: 869A Locations Windsor, CT

CNC Applications Engineer

Job Type Full-time Description About Barber-Nichols: Barber-Nichols (BN) is a leading provider of custom turbomachinery for the Defense, Aerospace, Cryogenics and Energy industries. This is a unique place. We are working with customers who are at the top of their game. Together, we help our customers revolutionize their markets and build amazing relationships with them in the process. If you're seeking to work with an amazing team in an a atmosphere that supports your development, and recognizes your achievements, BN is the place for you. Position Summary: We're seeking highly motivated, skilled and energetic candidates for a CNC Machinist-Lathe (Day Shift.) Duties and Responsibilities: <ul><li>Setup and operation of manual machine tools as required in support of CNC operations.</li><li>Setup and operation of 2 axis CNC horizontal &amp; VTL lathes and/or setup and operation of 3, 4, and 5 axis CNC lathes.</li><li>Organizes, stages, and moves materials as required.</li><li>Evaluates and requisitions purchased tooling and supplies.</li></ul>Requirements To qualify for this position, an individual must possess the knowledge, training, experience and abilities required as follows: Education and Training: <ul><li>High School Diploma or equivalent.</li></ul>Experience: <ul><li>Minimum four years of machine tool setup and operation experience in an ISO/AS/MIL STD prototype/job shop environment, utilizing complex documentation and verbal/written instruction.</li></ul>Additional Requirements: <ul><li>Overtime may be required.</li></ul>ITAR Requirements: To conform to U.S. Government commercial space technology export regulations, including the International Traffic in Arms Regulations (ITAR), 8 U.S.C. § 1324b(a)(3), applicants for employment at Barber-Nichols must be a U.S. citizen or national, lawfully admitted for permanent residence into the U.S. (i.e., current green card holder), or lawfully admitted as a refugee or granted asylum under 8 U.S.C. § 1157-1158. Security clearance is not required for this position . Equal Opportunity Employer: Barber-Nichols is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, marital status, gender identity, national origin, disability status, protected veteran status, or any protected status as defined by law. Compensation and Benefits: The hourly range for this role is $25.00-35.00 . This range represent the anticipated minimum and maximum base + bonus for this position based upon a good faith and reasonable estimate. The final compensation for this position will be set based on the applicant's qualifications (education, training and/or experience related to this role), and therefore, may fall outside the range shown, depending on the circumstances To view our benefits provided please visit Careers | Barber-Nichols .

CNC Machinist II-Lathe (Day Shift)

Job Type Full-time Description About Barber-Nichols: Barber-Nichols (BN) is a leading provider of custom turbomachinery for the Defense, Aerospace, Cryogenics and Energy industries. We are working with customers who are at the top of their game. Together, we help our customers revolutionize their markets and build amazing relationships with them in the process. If you're seeking to work with an amazing team in a atmosphere that supports your development, and recognizes your achievements, BN is the place for you. Position Summary: We're seeking highly motivated, skilled and energetic candidates for a CNC Machinist-Lathe (Night Shift). This position pays a 15% differential rate over base and any time over 40 hours is paid at time and a half. Duties and Responsibilities: <ul><li>Setup and operation of manual machine tools as required in support of CNC operations.</li><li>Setup and operation of 2 axis CNC horizontal &amp; VTL lathes and/or setup and operation of 3, 4, and 5 axis CNC mills.</li><li>Organizes, stages, and moves materials as required.</li><li>Evaluates and requisitions purchased tooling and supplies.</li></ul>Requirements To qualify for this position, an individual must possess the knowledge, training, experience and abilities required as follows: Education and Training: <ul><li>High School Diploma or equivalent.</li></ul>Experience: <ul><li>Minimum four years of machine tool setup and operation experience in an ISO/AS/MIL STD prototype/job shop environment, utilizing complex documentation and verbal/written instruction.</li></ul>Additional Requirements: <ul><li>Overtime may be required.</li></ul>ITAR Requirements: To conform to U.S. Government commercial space technology export regulations, including the International Traffic in Arms Regulations (ITAR), 8 U.S.C. § 1324b(a)(3), applicants for employment at Barber-Nichols must be a U.S. citizen or national, lawfully admitted for permanent residence into the U.S. (i.e., current green card holder), or lawfully admitted as a refugee or granted asylum under 8 U.S.C. § 1157-1158. Security clearance is not required for this position . Equal Opportunity Employer: Barber-Nichols is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, marital status, gender identity, national origin, disability status, protected veteran status, or any protected status as defined by law. Compensation and Benefits: The hourly range for this role is $25.00-35.00, This position pays a 15% differential rate over base and any time over 40 hours is paid at time and a half. This range represent the anticipated minimum and maximum base + bonus for this position based upon a good faith and reasonable estimate. The final compensation for this position will be set based on the applicant's qualifications (education, training and/or experience related to this role), and therefore, may fall outside the range shown, depending on the circumstances To view our benefits provided please visit Careers | Barber-Nichols .

CNC Machinist II (2nd Shift)

CNC Machinist II-Lathe (2nd Shift)

Be a part of the electric future of Volvo Cars We're an ambitious company and we've set ourselves some firm goals. By 2030, we want to be a fully electric mobility company with global growth. To make sure we deliver on our big plans, we'll need to expand our current manufacturing footprint. That's why we've decided to open a new state-of-the-art electric only car factory - and this time we're expanding in Kosice, Slovakia. The new plant will only use climate neutral energy and be designed to be a leader in sustainable and efficient premium electric car production. We will optimize layout and logistics flow to achieve the highest global standards in energy and environmental efficiency. This is a unique opportunity to be a part of building something completely new, setting a new standard for Volvo manufacturing. Jump in and join the ride! What You'll Do Provide technical and process support and solution enabling the process of machining our Megacasted product - die casting, and its equipment to produce and deliver highest quality products on time. Own process qualification, characterization, control and improvement for the manufacturing and processes belong to complete aluminum die-casted product machining technology and its subsequent processes. Key responsibilities <ul> <li>Responsible for setting up, developing and maintaining a unique Machining Bill of Process and its corresponding/subsequent processes for new and existing products and technologies including high safety, environmental and quality.</li> <li>Be part of the installation and designing technology to set up for the new Volvo plant and its aluminium die casted product which will be delivered parts to Machining to finalize the product</li> <li>Establish robust process control and monitoring system for machining components - Trim press + x-ray, CNC machining, deburring and laser passivation and its subsequent processes to ensure the quality of the high-performance structural product.</li> <li>Take care of washing process after CNC machining. Responsible for up-to-date process parameter fingerprinting. Being on machine side, not in the office.</li> <li>Responsible for maintaining and full control of running processes including technology water treatment, filters and cleaning activities.</li> <li>Lead root cause analysis and implement effective countermeasures for process excursions.</li> <li>Lead and manage process technicians supporting day-to-day coverage of manufacturing line processes, including rapid response on out-of-control processes to minimize cost and maximize productivity.</li> <li>Lead in the training of operators, and team leaders and demonstrate effective leadership</li> <li>Develop and maintain standard operating procedure and quality safety assurance documents, including, but not limited to, work instruction, and health of the line monitor (such as pre-flight or process checklist). Lead the first responder team to process excursions.</li> <li>Own and document problem-solving processes for non - conform materials and processes on each workstation in the Machining line</li></ul>Location You will be based at Volvo Cars' Kosice plant in Slovakia. What You'll Bring <ul> <li>Mechanical/Electrical/CNC/Casting or equivalent and proficient years of experience in a real mechanical and machining manufacturing/industrial environment CNC/PLC/programming/maintenance/robots.</li> <li>Essential skills include intelligent risk-taking, integrated thinking, strong leadership, effective problem-solving, and technical communication.</li> <li>Ability to manage technicians from multiple disciplines and levels.</li> <li>Experience in process engineering or manufacturing engineering associated with melting and furnace equipment</li> <li>Detail-oriented with strong record-keeping and organizational skills Skilled with common workplace software and PLC programming including MS Word, Excel, Powerpoint, Visio, Access, etc.</li> <li>Knowledge of process development, Statistical Process Control (SPC), Design of Experiments (DOE), &amp; FMEA fundamentals are required.</li> <li>Ability to handle various processes and equipment required.</li></ul>How to learn more and apply? Does this sound like your next challenge? Are you eager to join us? Then apply via the link in the advert with an attached CV in English and applications with a cover letter explaining your motivation will be highly appreciated. Once you receive a confirmation email from the system, your application will be acknowledged. Please note that due to GDPR we cannot accept applications through e-mail. We run interviews continuously, so don't wait to apply! Salary for this position starting from 2000 EUR, per month,gross. The salary amount represents the minimum guaranteed amount of the basic salary component applicable to the job. Final salary is negotiable and will be adjusted in accordance with seniority level and previous experience of candidate. In addition to the monthly salary, there is also a 13th salary paid in an aliquot amount and a performance bonus depending on the company's financial results and individual performance. Warm welcome with your application! Who are we? Volvo Cars is a company on a mission; to bring traditional car manufacturing into a connected, sustainable and smart future. Since 1927, we have been a brand known for our commitment to safety, creating innovative cars that make life less complicated for our consumers. In 2010, we decided to transform our business, resulting in a totally new generation of cars and technologies, as well as steady growth and record sales. Today, we're expanding our global footprint in Europe, China and the US, and we're on the lookout for new talent. We are constantly pushing our own skills and abilities to drive change in the automobile industry like never before. We are looking for innovative, committed people to join us in this endeavour and create safe, sustainable and connected cars. We believe in the power of people and will challenge and support you to reach your full potential. Join us and be part of Volvo Cars' journey into the future.

Machining Equipment and Process Engineer - die casting product

Company Introduction: Arrow Machine and FabricationGroup is an engineering-focused solution provider of machined castings, fabrications, and assemblies. We serve OEM customers in the rail, material handling, mining, defense, heavy truck, agriculture, power systems, construction, nuclear, engineered products, architectural, and forestry industries. We have access to the broadest range of metalwork solutions in the world through our elite group of companies. Arrow focuses on providing innovative design, quality craftsmanship, and exceptional customer service. Group Division: Baumeier Corporation is a Canadian owned and operated metal manufacturing company, specializing in prototyping and custom projects. At Baumeier we use the latest in cutting edge technology to provide clients with machining, fabricating, welding and design support. In business since 1991, we run medium to small production projects in our air-conditioned facility that is conveniently located in Cambridge. Position Summary: The CNC Programmer/Setter is responsible setting up, programming, and operating CNC machines to perform various tasks such as drilling, milling, and turning. This role requires a combination of technical skills, precision, and problem-solving abilities to ensure that products meet quality standards and specifications Primary Responsibilities: <ul><li>Develop and input CNC programs based on technical drawings and specifications using software such as Mastercam or AutoCAD.</li><li>Set up CNC machines, including selecting and installing the appropriate tools, fixtures, and materials.</li><li>Operate CNC machines to produce parts, ensuring that all operations are performed accurately and efficiently.</li><li>Inspect and measure finished products to ensure they meet specifications and quality standards using precision measuring tools such as micrometers, calipers, and gauges.</li><li>Perform routine maintenance on CNC machines to ensure they are operating correctly and troubleshoot any issues that arise during production.</li><li>Identify opportunities for process improvements to increase efficiency and reduce waste.</li></ul>Qualifications <ul><li>High school diploma or equivalent</li><li>Minimum 5+ years experience as a CNC Programmer/Setter in a manufacturing environment.</li></ul>Required Skills &amp; Expertise: <ul><li>Proficiency in reading and interpreting blueprints, technical drawings, and CNC programs.</li><li>Proficiency in CNC programming languages such as G-code and M-code.</li><li>Understands complex datum structures, including those for large weldments.</li><li>Advanced work-holding for large components.</li><li>Ability to troubleshoot and solve complex mechanical and operational issues.</li><li>Strong attention to detail and commitment to producing high-quality work.</li><li>Ability to lift and move heavy materials and tools (up to 50 lbs).</li></ul>Equipment/ Tools/ Technology Used: <ul><li>Measuring tools and instruments, such as micrometers, verniers, callipers, height gauges or other specialized measuring instruments</li><li>3, 4 and 5-Axis CNC machines</li></ul>Benefits: <ul><li>Comprehensive Benefits: Health, vision, and dental plans starting on day one, with no waiting period and three plans to choose from.</li><li>Retirement Savings: Fully funded RRSP with DPSP matching up to 2%.</li><li>Exclusive Discounts: Savings on gym memberships and partnerships with external businesses.</li><li>Learning and Development: Tuition reimbursement for education and career growth.</li><li>Company Events: Inclusive culture with regular events and networking opportunities.</li></ul>Arrow is committed to diversity and inclusion, and we thank all applicants in advance. Accommodations are available at all stages of the recruitment process in accordance with the Human Rights Code and the Accessibility for Ontarians with Disabilities Act.

CNC Programmer Setter - (5-Axis)

CIDAN Machinery is a global leader in the sheet metal industry. We are expanding our workforce and looking for talented and exceptional CNC Service Technicians. If you enjoy hands-on work, motivated, energetic, ready to grow in a dynamic atmosphere, and it is important for you to be part of a company that values its employees; come join our team! CIDAN Machinery Group offers an extensive line of sheet metal machinery for virtually every aspect of sheet metal working. When it comes to bending, rolling, cutting, and forming metal - we have the technology, innovation, and state-of-the-art equipment. With over 117 years in the sheet metal machinery industry, our team can help companies setting up shop layout, fulfilling orders, optimizing processes, and much more. Learn more about our business at <a href="https://cidanmachinery.com/us/" target="_blank">https://cidanmachinery.com/us/</a> Responsibilities <ul><li>Uphold the company core values by being Professional, Passionate, Embracing Change, Sustainable, and Building Together.</li><li>Install, troubleshoot, repair, maintain electrical, mechanical, hydraulic, and pneumatic systems as it applies to sheet metal fabrication equipment in compliance with all plant policies and procedures. </li><li>Provide effective technical assistance and repair/warranty of in-field equipment.</li><li>Provide phone support and technical assistance to customers via inhouse Help Desk. </li><li>Perform preventive and predictive maintenance as needed. </li><li>Read diagrams, schematics, operation manuals, and manufacturer's specifications for installations and repairs.</li><li>Operate hand tools, power tools, precision-measuring devices, and electronic/electrical test instruments. </li><li>Ability to execute and train during the install process.</li><li>Work as a team as needed to help the organization grow.</li></ul>Requirements <ul><li>Travel required</li><li>Must be able to lift 50lbs</li><li>Must be able to work in a variety of work environments</li><li>Must be able to obtain a US Passport, some travel may be required outside of the US</li></ul>Preferred Qualifications <ul><li>Must have the willingness to learn </li><li>Must have excellent work ethic </li><li>Must have intermediate to advanced computer skills</li><li>Must be able to lift 50 lbs.</li><li>Mechanical &amp; electrical experience preferred</li></ul> Benefits <ul><li>Health Benefits</li><li>401(K) Company Matching Contributions</li><li>Paid Vacation/PTO</li><li>Flexible Spending Account</li><li>Health Spending Account - Employer Contribution</li><li>Life Insurance - Employer Paid</li><li>Long-Term Disability - Employer Paid</li><li>Professional Development Allowance</li><li>Annual Profit Sharing</li></ul>

CNC Service Technician

CNC Set-Up/Operator Who We Are Clark-Reliance® is a world class manufacturing company, serving customers in over 120 countries in the power generation, refining, gas processing, and chemical industries. Clark-Reliance is a company that strives to maintain an environment that nurtures employees. Clark-Reliance prides itself on the development of its employees and finds way to continue to grow every year. What is a CNC Set-Up/Operator? The CNC Set-up/Operator will set-up, program (edit), operate and load either multi-axis CNC horizontal, vertical machining centers, turning centers, multi-station load stations or any other various equipment under the direction of a lead or supervisor found in the work cell that is necessary to produce parts to specification for Company production needs. What We're Looking For The ideal candidate will have at least one year related machining experience. CNC certificate preferred. The CNC Set-Up/Operator will report to the Machining Supervisor. The hours for this position are 7:00am to 3:30pm. Duties and Responsibilities <ol><li>Effectively set-up and operate equipment under the direction of a lead or supervisor in the CNC machining area for qualified areas.</li><li>Select required cutting tools, tool grades, and proper speeds and feeds from programming document.</li><li>Fill in details of blueprints and schematics from information provided.</li><li>Inspect all parts manufactured in the specific machining area and to perform quality related statistical analysis, (ex. SPC).</li><li>Perform routine preventative maintenance, such as daily or weekly oiling, greasing, checking coolant levels and concentrations, as required to maintain equipment in top operational order.</li><li>Comply with all safety procedures in each area assigned, including but not limited to, wearing protective clothing, special handling of chemicals, special handling of product, safety/rescue equipment usage, etc.</li><li>Interact and communicate with all levels of employees within the Company, as well as suppliers, customers and peers effectively.</li><li>Comply with policies, procedures, standards and rules of the Company.</li><li>Maintain quality assurance policy consistent with ISO standards.</li><li>Maintain work area in a clean, orderly and safe manner.</li><li>Punctual, regular and consistent attendance.</li><li>Perform all other job-related duties as assigned.</li></ol> Required Experience and Education <ul><li>High school diploma or equivalent. Able to read, write, and follow verbal instructions in Standard English. • One to three years related machining experience. • CNC certificate preferred. • Ability to read simple blueprints and technical specifications. • Ability to handle routine projects and tasks under close supervision. • Basic understanding of mathematics including geometry and trigonometry. • Ability to handle non-routine, standard projects and tasks.</li></ul> Physical and Technical Environment <ul><li>Must regularly lift or move up to 50 pounds and occasionally lift or move up to 100 pounds, using proper lifting techniques or other available resources such as lifting or moving equipment or help from another employee. • Use various manual wrenches and tools with the intent to sufficiently clamp and unclamp parts in fixturing. • Must be able to be on feet all day. • Specific vision requirements include close vision, depth perception, and the ability to adjust focus. • Regularly required to walk or stand, bend or twist, climb, reach with hands or arms. • Exposure to noise, dust, heat and cold on a regular basis. Must respond to changing requirements and working conditions.</li></ul> Benefits and Perks <ul><li>401(k)</li><li>Employee Referral Bonus Program</li><li>Tuition Reimbursement</li><li>Career Development Opportunities</li><li>Training Opportunities</li><li>Paid Holidays</li><li>Medical, Dental, and Vision Benefit Plans</li><li>Wellness Programs</li><li>Paid Vacation</li><li>Sport Leagues</li><li>Sporting Event Ticket Giveaways</li></ul> About Clark-Reliance®Clark-Reliance is a world class manufacturing company, serving customers in over 120 countries in the power generation, refining, gas processing, and chemical industries. The company is dedicated to supplying the largest and broadest product line in the instrumentation industry for all types of measurement and control. Key acquisitions over the last few decades have solidified Clark-Reliance as a leader in the separation and filtration industries as well. Note: The statements above are intended to describe the general nature and level of work being performed by people assigned to the job. They are not construed to be an exhaustive list of responsibilities, duties and skills required of personnel in the job. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer. Equal Opportunity Employer- M/F/Disabled/Vet Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

957 Jobs