field_job_employment_type

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

field_job_salary_range

Salary: $70.00 Hourly Location : Multi-Campus, WI Job Type: Part-Time Job Number: 2024-04904 Division: Manufacturing, Construction &amp; Transportation Pathway Opening Date: 07/09/2024 Closing Date: Continuous Application Requirements: Candidates (both internal and external) must complete the employment application in its entirety for further consideration. Typing "See Resume" in lieu of application completion will not be acceptable. Please make sure to carefully review requirements and provide all required documents to best assess your qualifications. In instances where we are unable to ascertain from a candidates' application material whether they meet any of the qualifications, they will be evaluated as not meeting such qualifications Supplemental Information: Hourly rate of $70 per hour is equivalent to the base rate of $40/hour multiplied by the number of hours per course times 1.75 hours which covers office hours and prep time for instructional activities. Activities conducted outside of teaching (non-instructional), require approval and will be paid at the base hourly rate of $40. Description Milwaukee Area Technical College (MATC) is Wisconsin's largest and most diverse technical college, offering 170+ high-quality programs that connect students to a career in as little as one to two years. The college also offers a less expensive path to a four-year degree. MATC is transforming lives, industry and our community by preparing students today for the careers of tomorrow. MATC's diverse team members - 42% of whom are employees of color--work with a purpose to serve the students who make us one of the most diverse two-year institutions in the Midwest. Together, we are meeting the needs of the community we shared and committed to eliminating equity gaps in higher education for both students and employees. We are seeking passionate individuals to join our team who shares the same passion in serving this purpose. Learn more about MATC at Characteristic Duties and Responsibilities Under the supervision of the Associate Dean, to teach conventional machining, CNC machining set-up and operations in a related and laboratory atmosphere; and to provide general support and curriculum assistance to learning activities in related subjects in the area of machine tool operations and programming. Related duties include participation in division and department activities and the performance of other duties as assigned. <ul><li>Prepare for and deliver instruction and perform teaching-related activities.</li><li>Manage the classroom/laboratory.</li><li>Develop curriculum and monitor and revise as appropriate to maintain course effectiveness; assist in program evaluation.</li><li>Manage equipment, supplies and materials.</li><li>Assess student performance and advise students on academic issues.</li><li>Collaborate with advisory committee in program area.</li><li>Attend departmental and institutional meetings.</li><li>Promote the education/training program, participate in efforts to recruit and retain students, and participate in efforts to market MATC.</li><li>Support student organizations and activities.</li><li>Develop relationships with business and industry.</li><li>Complete program evaluation and follow-up.</li><li>Maintain certification, continue professional development and stay current in field.</li><li>Perform other duties as assigned.</li></ul> Qualifications Only those who meet all of the base minimum requirements listed below will be considered. Educational Minimum Experience: <ul><li>Must have completed a Wisconsin Indentured apprenticeship in Machine Tool or Tool and Die; OR</li><li>Must have completed an Associate or Bachelor Degree in Computer Numerical Control or related field (example; Manufacturing/Industrial engineering)</li></ul> Occupational Minimum Experience: In addition to the Educational requirement.<ul><li>Candidate must have a minimum of five (5) years full-time or equivalent (10,000 hours) of relevant work experience in CNC programming including CAM experience.</li><li>In addition, at least ONE of the following must be met:<ul><li>At least one year of work experience must have occurred within the last five years; OR,</li><li>Two years of teaching Numerical Control course work at the post-secondary level within the past five years</li></ul></li></ul>{One (1) year of teaching experience equivalent two (2) semesters full-time of four (4) semesters part-time}Preferred Licensure in ADDITION to the minimum requirements listed above: Journey level status in one of the following:<ul><li>Tool&amp; Die</li><li>Machine Tool</li></ul> Supplemental Information Start Date: This position supports the Manufacturing, Construction, and Transportation Pathway and is available to start in the spring semester; 16-week classes begin around mid-January. Primarily looking for candidates who are available to teach daytime weekday hours. Hours/Location: This in-person position is a .5 FTE. Hours and location are based on enrollment and departmental need. Modality is IN-PERSON Salary: Beginning in the fall of 2024 the starting hourly wage for all part-time faculty is $40 per course hour of teaching. Part-time faculty are also compensated for an additional 45 minutes of time for each hour of instruction to cover office hours and prep time which is equivalent to $70 per hour. This starting hourly wage of $40 an hour is non-negotiable unless market conditions dictate otherwise. Application Materials: Candidates (both internal and external) must complete the employment application in its entirety for further consideration. Typing "See Resume" in lieu of application completion will not be acceptable. Qualification determination will be based on years of credited experience that is listed on the job application only so please include complete work history. Also, please include unofficial transcripts for all degrees earned and/or attach a copy of Certificate of Apprenticeship. Interviews: Selected qualified candidates will be invited to virtually interview for this position. Information regarding the second round of interviews will be provided to selected candidates. EEO/AAMilwaukee Area Technical College will not discriminate against any employee, applicant for employment, student, or applicant for admission on the basis of race, color, national origin, ancestry, sex, sexual orientation, creed, religion, political affiliation, marital status, parental status, pregnancy, disability, age, membership in any reserve component of the armed forces, union affiliation, arrest and conviction record, or any other protected category under applicable local, state or federal law. Milwaukee Area Technical College is an Equal Opportunity/Access Educator/Employer operating under an Affirmative Action Plan. Reasonable accommodations will be provided for qualified individuals with disabilities. If you have a disability and need special accommodation for the application process, please contact our office at 414-297-6529 (Wisconsin Relay System: 711) or email . Women, veterans, and minorities are encouraged to apply. Employee Benefits at a Glance - PART-TIME FACULTY/EDUCATIONAL SUPPORT- Part-time employees pay a higher percentage of the premium than full-time employees. HEALTH INSURANCE: MATC offers a choice between two medical insurance plans. See below for plan types: 1- UMR High Level PPO 2- UMR Low Level PPO Note: All medical plans include Prescription Drug benefits at no additional costs to employees. DENTAL INSURANCE: MATC offers a traditional group dental plan through Delta Dental. Annual maximum per covered person is $2,500; plan covers preventive, routine, restoration, and orthodontics for dependents up to age 19. GROUP TERM LIFE INSURANCE: MATC offers group life insurance benefits through Symetra Provident Insurance with active assignment and is fully paid for by the College. The amount of insurance is $15,000. The benefit is doubled in the event of accidental death. RETIREMENT BENEFITS: If you are employed for greater than 12 months and meet the minimum hours requirement for participation in the WRS pension system, you will be notified of your eligibility. The College currently pays the full cost of the employer contribution (6.9%), and the employee pays the full part of the employee contribution of 6.9% of salary. There is a five year vesting period requirement in order to qualify for any employer contributions made on the employee's behalf. FLEXIBLE SPENDING PLANS: MATC offers eligible employees the opportunity to participate in both Health Care and Dependent Care flexible spending accounts administered through UMR. SICK LEAVE BENEFITS: Sick leave is earned based on one times the weekly workload per semester. The maximum hours accumulation is 640 hours. VACATION BENEFITS: Vacation is earned based on the length of service and hours worked each pay period. (Not available for Instructors) PAID HOLIDAYS: MATC offers paid/flex holidays based on position. MATC is an Affirmative Action/Equal Opportunity Institution and complies with all requirements of the Americans With Disabilities Act. 01 All candidates, internal and external, must complete the online employment application in its entirety for further consideration. Have you included and fully completed the following information on your application?: 1) Education 2) Work Experience 3) Transcripts (or proof of completion of registered apprenticeship) <ul> <li>Yes</li> <li>No</li></ul>02 Are you able and willing to work in-person, onsite, at multi-campus locations? <ul> <li>Yes</li> <li>No</li></ul>03 Please list days and hours of availability for teaching. 04 Do you have five (5) years of full-time or equivalent (10,000 hours) of work experience in CNC programming, including CAM experience? Please make sure your answer is able to be verified from your application. <ul> <li>Yes</li> <li>No</li></ul>05 Do you have at least one year of related occupational work experience that has occurred within the last five years OR at least two years (4 full-time semesters or 8 part-time semesters) of teaching Numerical Control related course work at the post-secondary level within the last five years? Please make sure your answer is able to be verified from your application. <ul> <li>Yes</li> <li>No</li></ul>06 Please select from below if you have journey level status in Tool &amp; Die or Machine Tool. Please select 'N/A' if not applicable. <ul> <li>Tool &amp; Die</li> <li>Machine Tool</li> <li>N/A</li></ul>07 Do you have direct or related work experience in technical or higher education? <ul> <li>Yes</li> <li>No</li></ul>08 How would you support a diverse student population in acclimating to a new environment for academic success? Please be specific in your answer. 09 (INTERNAL APPLICANTS ONLY) Please specifically describe how your previous or current duties/experience relates to this position. (External candidates type N/A) Required Question

Instructor, Computer Numerical Control (CNC) (Part-Time)

THIS JOB IS LOCATED AT: W160 S6609 Commerce Drive, Muskego, Wisconsin 53150 **** Relocation Assistance is available in some circumstances. **** Job Duties &amp; Responsibilities Set up and troubleshoot CNC Gear Hobbing machines, Shapers, Gear Grinders and Broaches to machine close tolerance splines or gear teeth on metal blanks according to specifications, machining instructions. Knowledge of gear hobbing procedures, including proof and edits of programs, quality standards, and measuring equipment. Operate machines when necessary. Essential Functions <ul><li>Read machining instructions, blueprints, and gear specification sheets to define machine settings, fixtures, and required hobs used for dimensions and tolerances.</li><li>Select or build fixtures, holders, tooling, hobs, and attachments.</li><li>Confer with engineers, programmers, production employees, and management to resolve machining issues, while maintaining continuous improvement, improved tool life, reduction of tooling costs, machine downtime, improved set up time, and implementation of quality improvements.</li><li>Work with Engineering on new product launches for fixturing, tooling, and processes.</li><li>Comply with all work instructions, following and maintaining ISO/QS Standards and Northern Gear &amp; Machining procedures, and quality certification requirements.</li><li>Assisting/Training operators in gear/hob/shaper department.</li><li>Other job-related duties as assigned.</li></ul>Knowledge, Skills, &amp; Abilities: <ul><li>Requires physical ability and stamina to perform the essential functions of the position. Ability to walk, stand, lift, carry up to 40 pounds, push, kneel, bend, stoop, reach over and under waist level, twist for extended periods of time on cement.</li><li>Demonstrate the verbal and written communications necessary to complete forms, input data into computer quality, production and engineering programs, and exchange information with other team members.</li><li>Ability to read and understand blueprints.</li><li>Operate in a fast-paced production atmosphere.</li></ul> *Pay based on experience: up to $30 / hr About Northern Gear and Machining Northern Gear and Machining is a full-service machining company based in Southeastern Wisconsin that produces precision CNC machined parts, geared components, and related assemblies. As a family-owned business for over 70 years, Northern Gear and Machining has been able to provide their customers outstanding service with quality products, cutting edge-technology, and on-time delivery.

CNC Gear Hob Set-up Machinist/Operator

WE'RE HIRING!!! Advanced Manufacturing Technologies Inc. AMT machines high precision components for the medical, defense, food processing, and aerospace industries. We are hiring for CNC Machine operators. Experience in Mills and Lathes <ul><li>First and second shift available</li><li>Dental</li><li>401K with employer matching </li><li>Shift premium</li><li>Overtime available</li><li>Paid holidays</li><li>Veteran Owned</li><li>Competitive wages</li></ul>

13 Jobs in Milwaukee, WI, USA