hireCNC
Search

Industrial Machining Repair Tech III (CNC)

companyAmentum
locationLafayette Dr, Lafayette, IN 47909, USA
PublishedPublished: 7/23/2023
Full Time
3 - 5 years of experience
Amentum is seeking a 2nd shift CNC Machine Repair Technician III at GE Lafayette Aircraft Engine Assembly! Typical work hours are 2:30 PM - 11 PM; hours may vary based on business demand. Must be willing to work overtime when required. May be required to work holidays and weekends. This position may require various shifts, weekends, and alternative work schedules.

Enjoy working in clean, year-round climate controlled buildings where Safety is the top priority!

This position is responsible for providing an intermediate level of expertise in responding to work orders, troubleshooting, and providing preventive maintenance on the facility machine tool equipment in an industrial environment.

Responsibilities:
  • Diagnoses, troubleshoots, maintains, and repairs electrical equipment up to 480 volt 3 phase and machine tools such as grinders, lathes, mills, etc.
  • Maintains, improves, and participates in developing control systems, programming ladder logic / PLCs (Allen Bradley, Siemens, FANUC, GE, MicroLogix, ControlLogix, and PLC-5) and HMI.
    Utilizes the building automation system to track building conditions and the operation of production equipment.
  • Utilizes strong electrical and mechanical skills in order to complete assignments.
  • Identifies and corrects any safety-related issues and performs independent equipment evaluations to identify potential equipment failures.
  • Safely performs functions of the position including following proper safety guidelines such as job hazard analysis and lockout/tag-out procedures and wearing PPE as required.
  • Understands company policies and enforces safety regulations.
  • Performs preventive maintenance on industrial electrical control and operating systems as scheduled in the Computerized Maintenance Management System (CMMS).
  • Responds and provides service and feedback to the customer on all work orders while assuring compliance to codes, regulations and industry standards.
  • Recommends measures to improve maintenance methods and equipment performance.
  • Analyzes and resolves work problems or assists workers in solving work problems.
  • Maintains, troubleshoots and repairs electrical equipment, such as area personal fans, thermostats for gas and electric heaters, reset of buss bars and disconnects, etc
  • Troubleshooting of electrical components such as, but not limited to PLC's, AC & DC drives, relay logic, single loop controllers, pneumatics & hydraulics.
  • Operates various measuring, diagnostic and testing instruments to help provide energy efficiency solutions.
    Electrical system components - MCC's, inverters, motors, etc.
  • Differentiates between cause types when troubleshooting among product, process, mechanical, and electrical contributors.
  • Reads and interprets mechanical and electrical schematics/prints, updating electrical prints/schematics assigned for modification.
  • Operates a variety of equipment such as hand tools, laptop computers and diagnostic hardware to perform work.
  • Maintains a strict schedule in order to be successful in the assignment yet demonstrates flexibility in the day-to-day activities and scheduling for the benefit of the customer.
  • General Maintenance of equipment will also be required.
  • Other duties as assigned by Manager or Supervisor.
Minimum Requirements:

1. High school diploma or demonstrated equivalent.

2. Three-Four years of experience maintaining buildings, facilities, or equipment a large commercial or industrial environment, or demonstrated equivalent combination of education and experience.

Additional Information:

* Qualified applicants who are offered a position must pass a pre-employment substance abuse test.

* This position requires a valid Driver's License.

* Must be able to obtain and maintain facility credentials/authorization. Note U.S. Citizen is required for facility credentials/authorization at this work location.

Physical Requirements:

* Requires the ability to regularly lift up to 50 lbs.

* Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.

* Requires the flexibility to bend/stoop, squat repetitive during shift.

* Requires the ability to regularly kneel repetitive for shift.

* Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.

* Requires the ability to stretch/reach on a repetitive basis for shift.

* Requires the ability to walk extensively throughout the plant during shift.

* Requires the ability to safely operate an Ariel Lift.

* Requires the use of a Company/Client approved utility knife.

* Requires the ability to differentiate colors pertaining to wire color-coding.

* Some tasks will require repetitive wrist movement.

* Requires ability to read and understand information contained in a variety of documents or displayed on a computer screen.

* Requires ability to use a variety of office equipment and to operate a computer keyboard to access data bases, to send/receive messages and to prepare documents.

* Demonstrated fluency in computer use including the full Microsoft product line.

* Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.

* Requires the ability to communicate with others on the telephone and in one-on-one or group discussions, meetings and presentations.

Special Requirements:

* Wear steel toe safety shoes, safety glasses, gloves, hard hats and other Personal Protective Equipment as needed.

* Cope with demands (stressors) that are associated with the job and/or the work environment so that acceptable levels of performance and overall contribution are maintained.

Preferred Qualifications:

• Associates Degree in Industrial Technology, Industrial Electrical, or related program.

• Experience troubleshooting BAS / BMS systems and controls (Schneider Electric BAS, Honeywell, Siemens, Edstrom, etc.)

• Experience creating HMIs surrounding Historian data.

• Possess knowledge of Building Systems sequence of operations

• Experience diagnosing, troubleshooting and repairing process mechanical systems such as HVAC equipment and utilities supporting same.

• Experience working with Fire Protection Systems

• Knowledge of Water Systems used in critical environment applications.

• Experience troubleshooting, repairing and working with electrical, mechanical, plumbing, and pneumatic systems.

• Experience using testing equipment such as meggers, voltmeters, multi-meters, etc. used in maintenance and troubleshooting activities.

Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran's status, ancestry, sexual orientation, marital status, family structure, medical condition including genetic characteristics or information, veteran status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.

Labor Law Posters

EEO including Disability/Protected Veterans

Years of experience

  • 3 - 5 years of experience

Required skills

  • Siemens
  • Steel
  • Fanuc
  • Siemens